Responsiveness, affinity constants and beta-adrenoceptor reserves for isoprenaline on aortae from normo-, pre and hypertensive rats

The objective of this study was to determine the responsiveness, affinity constants and beta-adrenoceptor reserves for isoprenaline on the isolated aorta in the maturation of normotensive and hypertensive rats. The effects of a very slowly reversible antagonist, bromoacetylalprenololmenthane (BAAM), on the relaxant responses of the aortae of 5- and 14-week-old Wistar Kyoto normotensive rats (WKY) and spontaneously hypertensive rats (SHRs) to isoprenaline were determined. Five-week-old SHRs are pre-hypertensive and the aortic rings are less responsive to isoprenaline than age-matched WKY (pD(2) values: WKY, 8.40; SHRs, 8.03). Similar relaxant responses to forskolin were obtained on the aortae of 5- and 14-week-old WKY and SHRs. The K-A value for isoprenaline at the aortic beta(2)-adrenoceptors of the 5-week-old WKY was 2.1 x 10(-7) M, and similar values were obtained on the aortae of 5-week-old SHR and 14-week-old WKY and SHRs. In the maturation of the WKY aortae from 5 to 14 weeks, there was a reduction in the maximum response, a major loss of sensitivity and a loss of 2-adrenoceptor reserve for isoprenaline. On 5-week-old SHR aorta, the sensitivity to isoprenaline was 2.5-fold lower, and the beta(2)-adrenoceptor reserve was less than on age-matched WKY. In the development of hypertension on the SHR aorta from 5 to 14 weeks, there was a reduction in the maximum response to isoprenaline. At 14 weeks, the sensitivity and the 2-adrenoceptor reserve to isoprenaline were similar, but the maximum responses were lower on the SHR than WKY. As there are differences in pre-hypertensive SHR and age-matched WKY aortic responses to isoprenaline, it is no longer valid to consider that the loss of responsiveness to isoprenaline in hypertension is solely owing to the hypertension. There are no changes in affinity, but major changes in the sensitivity, maximum responses and aortic beta(2)-adrenoceptor reserves to isoprenaline in the maturation of normotensive and pre-hypertensive aortae.

Sex differences in heritability of BMI: A comparative study of results from twin studies in eight countries

Body mass index (BMI), a simple anthropometric measure, is the most frequently used measure of adiposity and has been instrumental in documenting the worldwide increase in the prevalence of obesity witnessed during the last decades. Although this increase in overweight and obesity is thought to be mainly due to environmental changes, i.e., sedentary lifestyles and high caloric diets, consistent evidence from twin studies demonstrates high heritability and the importance of genetic differences for normal variation in BMI. We analysed self-reported data on BMI from approximately 37,000 complete twin pairs (including opposite sex pairs) aged 20-29 and 30-39 from eight different twin registries participating in the GenomEUtwin project. Quantitative genetic analyses were conducted and sex differences were explored. Variation in BMI was greater for women than for men, and in both sexes was primarily explained by additive genetic variance in all countries. Sex differences in the variance components were consistently significant. Results from analyses of opposite sex pairs also showed evidence of sex-specific genetic effects suggesting there may be some differences between men and women in the genetic factors that influence variation in BMI. These results encourage the continued search for genes of importance to the body composition and the development of obesity. Furthermore, they suggest that strategies to identify predisposing genes may benefit from taking into account potential sex specific effects.

Does participation in a pain course based on the international association for the study of pain's curricula guidelines change student knowledge about pain?

The People in Pain course was set up as a joint initiative of the Departments of Occupational Therapy and Physiotherapy within the School of Health and Rehabilitation Sciences at The University of Queensland. It was instigated in response to the publication of Pain Curricula for Occupational Therapy and Physiotherapy by the International Association for the Study of Pain (IASP) in 1994 (1). The first year it was offered, the "People in Pain" course comprised 14 h of lecture content. It was then expanded to encompass 28 h of lectures and seminar involvement. OBJECTIVES: To evaluate the impact of participation in a university pain course that meets the IASP pain curricula guidelines to increase health professional students' knowledge about pain. METHODS: Students who participated in the People in Pain course over the first three years were invited to complete the Revised Pain Knowledge and Attitudes Questionnaire (R-PKAQ) pre- and postcourse. Data obtained from 22 students in the short course formed a pilot project, and data from 22 students in the longer version of the course were used in the present study. RESULTS: Examination of the correlation matrix indicated substantial correlations between all R-PKAQ subscales except physiological basis of pain and pharmacological management of pain. In both the pilot project during the first year of the course and the expanded course in the following two years, significant improvement was found in the students' knowledge on five of the six subscales of the R-PKAQ: physiological basis of pain, psychological factors of pain perception, assessment and measurement of pain, cognitive-behavioural methods of pain relief, and pharmacological management of pain. Improvements in the developmental aspects of pain perception subscale failed to reach significance. CONCLUSIONS: An integrated pain course developed according to the pain curriculum guidelines developed by the IASP resulted in increased student knowledge regardless of the length of the program attended.

Conceitos de eletricidade e suas aplicações tecnológicas : uma unidade de ensino potencialmente significativa

O presente trabalho teve como objetivo central a elaboração de uma unidade de ensino sobre conceitos de eletricidade e validação desse material como uma Unidade de Ensino Potencialmente Significativa (UEPS). Assim, foi desenvolvida uma unidade de ensino sobre os temas diferença de potencial, corrente elétrica e suas aplicações sob a luz da Teoria da Aprendizagem Significativa de Ausubel e aplicada em seis turmas do terceiro ano do ensino médio de uma escola estadual do Espírito Santo. A fim de investigação das potencialidades desse método de ensino, utilizou-se metodologias de pesquisa qualitativa descritiva interpretativa e quantitativa préexperimental. Tendo em vista a importância dos conhecimentos prévios dos estudantes para promover aprendizagem significativa, no início do estudo foram aplicados questionários de opinião, realizados diálogos prévios e construções de mapas conceituais, sendo esses importantes instrumentos para a adequação do material apresentado ao aluno em relação ao seu perfil e à sua estrutura cognitiva. Para coleta de dados da pesquisa foram feitas gravações em áudio das principais etapas, diários de bordo, fotografias dos trabalhos, questionários e mapas conceituais prévios e finais e, finalmente, avaliação escrita. A análise dos mapas conceituais constituiu um dos principais instrumentos para avaliação sob o ponto de vista do desenvolvimento cognitivo dos estudantes, no sentido de classificar os mapas, associá-los às estruturas cognitivas de quem os construiu e identificar variações estatisticamente válidas em relação às construções de novos significados. A investigação revelou que, de modo geral, a unidade foi responsável por melhorias significativas na predisposição dos alunos em aprender e na promoção da aprendizagem significativa, possibilitando sua a validação como uma UEPS.

A Digital Game Development Education Project

The success of the digital game industry is spawning several undergraduate degrees aiming at the training of digital game developers. Building adequate new courses curricula is not a trivial task and demands a profound analysis of the scientific areas to introduce as well as the dependencies throughout the entire degree. Another important aspect of every academic educational plan are the satellite projects that promote entrepreneurship and provide practical professional experiences to students. This paper presents the main guidelines adopted in the creation of the first digital game development undergraduate degree created in Portugal.

Integrating environmental and economic life cycle analysis in product development: a material selection case study

Purpose Achieving sustainability by rethinking products, services and strategies is an enormous challenge currently laid upon the economic sector, in which materials selection plays a critical role. In this context, the present work describes an environmental and economic life cycle analysis of a structural product, comparing two possible material alternatives. The product chosen is a storage tank, presently manufactured in stainless steel (SST) or in a glass fibre reinforced polymer composite (CST). The overall goal of the study is to identify environmental and economic strong and weak points related to the life cycle of the two material alternatives. The consequential win-win or trade-off situations will be identified via a Life Cycle Assessment/Life Cycle Costing (LCA/LCC) integrated model. Methods The LCA/LCC integrated model used consists in applying the LCA methodology to the product system, incorporating, in parallel, its results into the LCC study, namely those of the Life Cycle Inventory (LCI) and the Life Cycle Impact Assessment (LCIA). Results In both the SST and CST systems the most significant life cycle phase is the raw materials production, in which the most significant environmental burdens correspond to the Fossil fuels and Respiratory inorganics categories. The LCA/LCC integrated analysis shows that the CST has globally a preferable environmental and economic profile, as its impacts are lower than those of the SST in all life cycle stages. Both the internal and external costs are lower, the former resulting mainly from the composite material being significantly less expensive than stainless steel. This therefore represents a full win-win situation. As a consequence, the study clearly indicates that using a thermoset composite material to manufacture storage tanks is environmentally and economically desirable. However, it was also evident that the environmental performance of the CST could be improved by altering its End-of-Life stage. Conclusions The results of the present work provide enlightening insights into the synergies between the environmental and the economic performance of a structural product made with alternative materials. Further, they provide conclusive evidence to support the integration of environmental and economic life cycle analysis in the product development processes of a manufacturing company, or in some cases even in its procurement practices.

REENGINEERING THE CONCEPT OF URBAN CARS: A CASE STUDY

Based on a previously developed mathematical model for fuel consumption of a modular car, here we discuss the cross impacts of engineering scenarios vs. flexibility in use for modular vehicle architectures to achieve the reduction of CO2 emissions targeted by the European Union, in 2009. A systems perspective is adopted in conceptualizing a modular architecture of vehicles. From a theoretical viewpoint, we found modular architecture of vehicles a potential design strategy to minimize fuel inefficiencies and, thus, a strategy for design for environment.

A digital game development education project

The success of the digital game industry is spawning several undergraduate degrees aiming at the training of digital game developers. Building adequate new courses curricula is not a trivial task and demands a profound analysis of the scientific areas to introduce as well as the dependencies throughout the entire degree. Another important aspect of every academic educational plan are the satellite projects that promote entrepreneurship and provide practical professional experiences to students. This paper presents the main guidelines adopted in the creation of the first digital game development undergraduate degree created in Portugal.

Competitiveness of tourist destinations: the study of 65 key destinations for the development of regional tourism

Tourism has reached world importance in the economy. The competition in tourism has intensified between destinations, whether the destinations are cities, regions or countries. In this sense, the evaluation of the tourism competitiveness of these destinations may be helpful in planning and prioritizing actions that will benefit the industry. This article discusses the concept of competitiveness by the multidimensional view of performance, efficiency and unit analysis. Using the theoretical framework lifted, this article shows the 'Study on the competitiveness of the 65 destinations inducers of regional tourism development' prepared by the Tourism Ministry, the Brazilian Support Service to Micro and Small Enterprises (Sebrae) and Getulio Vargas Foundation (FGV), its assumptions that guided this study as well its methodological aspects. Based on this methodology, it was carried out a diagnosis of these 65 destinations selected by the Brazilian Ministry of Tourism to be inducers of tourism in their respective regions. The result of competitiveness reached by these 65 inductors destinations is presented in this article, providing a map of the level of competitiveness of tourism in Brazil.

Environmental exposure to toxicants mixtures from a multi-purpose estuary: perspectives for a biomonitoring study in Portugal

This work was focused on a multi-purpose estuarine environment (river Sado estuary, SW Portugal) around which a number of activities (e.g., fishing, farming, heavy industry, tourism and recreational activities) coexist with urban centres with a total of about 200 000 inhabitants. Based on previous knowledge of the hazardous chemicals within the ecosystem and their potential toxicity to benthic species, this project intended to evaluate the impact of estuarine contaminants on the human and ecosystem health. An integrative methodology based on epidemiological, analytical and biological data and comprising several lines of evidence, namely, human contamination pathways, human health effects, consumption of local produce, estuarine sediments, wells and soils contamination, effects on commercial benthic organisms, and genotoxic potential of sediments, was used. The epidemiological survey confirmed the occurrence of direct and indirect (through food chain) exposure of the local population to estuarine contaminants. Furthermore, the complex mixture of contaminants (e.g., metals, pesticides, polycyclic aromatic hydrocarbons) trapped in the estuary sediments was toxic to human liver cells exposed in vitro, causing cell death, oxidative stress and genotoxic effects that might constitute a risk factor for the development of chronic-degenerative diseases, on the long term. Finally, the integration of data from several endpoints indicated that the estuary is moderately impacted by toxicants that affect also the aquatic biota. Nevertheless, the human health risk can only be correctly assessed through a biomonitoring study including the quantification of contaminants (or metabolites) in biological fluids as well as biomarkers of early biological effects (e.g., biochemical, genetic and omics-based endpoints) and genetic susceptibility in the target population. Data should be supported by a detailed survey to assess the impact of the contaminated seafood and local farm products consumption on human health and, particularly, on metabolic diseases or cancer development.

Development of an in situ penetration test for the uptake of preservatives in applied wood

This paper concerns the study of biocides application in old timber structures of maritime pine (Pinus pinaster Ail.), previously impregnated with other products. A method was developed in laboratory to determine in situ the penetration depth of a product applied superficially. As initial treatment, three traditional products for sawn timber for buildings were used and, for new treatments, two newer, more environmentally benign products were used. Their ability to penetrate the pre-treated surfaces was evaluated after 1, 2 and 3 applications at 24 hours intervals and the results obtained are presented. Finally, the applicability of the developed test to the in-situ evaluation of timber structures is also discussed.

Web survey system to discover the actual role of experience in learning in higher education: a case study

March 19 - 22, 2006, São Paulo, BRAZIL World Congress on Computer Science, Engineering and Technology Education

ePortfolios in translators’ training and assessment

Translator’s training and assessment has used more and more tools and innovative strategies over the years. The goals and results to achieve haven’t changed much, however: translation quality. In order to accomplish it, the translator and all the tasks and processes he develops appear as crucial, being pre-translation and post-translation processes equally important as the translation itself, namely as far as autonomy, reflexive and critical skills are concerned. Finally, the need and relevance of collaborative tasks and networks amongst virtual translation communities, led us to the decision of implementing ePortfolios as a tool to develop the requested skills and extend the use of Internet in translation. In this paper we describe a case-study of a pilot experiment on the using of e-portfolios as a translation training tool and discuss their role in the definition of a clear set of objectives and phases for the completion of each task, by helping students in the management of the projects deadlines, improving their knowledge on the construction and management of translation resources and deepening their awareness about the concepts related to the development of eportfolios.