Introducing standardized protocols for anthropological measurement of virtual subadult crania using computed tomography

Objectives This study introduces and assesses the precision of a standardized protocol for anthropometric measurement of the juvenile cranium using three-dimensional surface rendered models, for implementation in forensic investigation or paleodemographic research. Materials and methods A subset of multi-slice computed tomography (MSCT) DICOM datasets (n=10) of modern Australian subadults (birth—10 years) was accessed from the “Skeletal Biology and Forensic Anthropology Virtual Osteological Database” (n>1200), obtained from retrospective clinical scans taken at Brisbane children hospitals (2009–2013). The capabilities of Geomagic Design X™ form the basis of this study; introducing standardized protocols using triangle surface mesh models to (i) ascertain linear dimensions using reference plane networks and (ii) calculate the area of complex regions of interest on the cranium. Results The protocols described in this paper demonstrate high levels of repeatability between five observers of varying anatomical expertise and software experience. Intra- and inter-observer error was indiscernible with total technical error of measurement (TEM) values ≤0.56 mm, constituting <0.33% relative error (rTEM) for linear measurements; and a TEM value of ≤12.89 mm2, equating to <1.18% (rTEM) of the total area of the anterior fontanelle and contiguous sutures. Conclusions Exploiting the advances of MSCT in routine clinical assessment, this paper assesses the application of this virtual approach to acquire highly reproducible morphometric data in a non-invasive manner for human identification and population studies in growth and development. The protocols and precision testing presented are imperative for the advancement of “virtual anthropology” into routine Australian medico-legal death investigation.

A study of the phosphate mineral kapundaite NaCa(Fe3+)4(PO4)4(OH)3⋅5(H2O) using SEM/EDX and vibrational spectroscopic methods

Vibrational spectroscopy enables subtle details of the molecular structure of kapundaite to be determined. Single crystals of a pure phase from a Brazilian pegmatite were used. Kapundaite is the Fe3+ member of the wardite group. The infrared and Raman spectroscopy were applied to compare the structure of kapundaite with wardite. The Raman spectrum of kapundaite in the 800–1400 cm−1 spectral range shows two intense bands at 1089 and 1114 cm−1 assigned to the ν1PO43- symmetric stretching vibrations. The observation of two bands provides evidence for the non-equivalence of the phosphate units in the kapundaite structure. The infrared spectrum of kapundaite in the 500–1300 cm−1 shows much greater complexity than the Raman spectrum. Strong infrared bands are found at 966, 1003 and 1036 cm−1 and are attributed to the ν1PO43- symmetric stretching mode and ν3PO43- antisymmetric stretching mode. Raman bands in the ν4 out of plane bending modes of the PO43- unit support the concept of non-equivalent phosphate units in the kapundaite structure. In the 2600–3800 cm−1 spectral range, Raman bands for kapundaite are found at 2905, 3151, 3311, 3449 and 3530 cm−1. These bands are broad and are assigned to OH stretching vibrations. Broad infrared bands are also found at 2904, 3105, 3307, 3453 and 3523 cm−1 and are attributed to water. Raman spectroscopy complimented with infrared spectroscopy has enabled aspects of the structure of kapundaite to be ascertained and compared with that of other phosphate minerals.

Cultural Policy

The development of cultural policy during the twentieth century is underscored by three key developments. First, the formation of the Arts Council of Great Britain in 1946, first headed by the Cambridge economist Lord Keynes, saw the scaffolding developed for ongoing government support for the arts. In doing so, it established the principle of an “arm’s length” relationship between the government of the day and individual artists, through the development of independent arts boards engaged in the peer review of creative works. Second, the formation of the Fifth Republic in France in 1958 saw the creation of a Ministry of Culture, headed by the writer André Malraux. Malraux and his successors have seen three major tasks for a national cultural policy: government support for the creation of new artistic and cultural works; the promotion and maintenance of cultural heritage; and enabling equitable access to creative works and creative opportunities through all segments of society. Finally, at a global level, agencies such as UNESCO have sought to promote national cultural policies as an element of national sovereignty, particularly in the developing world, and this has involved addressing sources of structural inequality in the distribution of global cultural and communications resources...

Ensuring sessional academic success by rethinking the place of academic development

There has been growing recognition of the contribution that Sessional Academics make to student learning in higher education; with recent studies concluding that around half Australian university teaching is now performed by casual staff [Red Report 2008; May, 2013]. However, sector-wide research and institutional audits continue to raise concerns about academic development and quality assurance, as well as the recognition and retention of Sessional Academics. In response, universities offer academic development programs. However, while such centrally offered programs are undoubtedly useful, they are necessarily generic and cannot address the local contexts of faculties or provide ‘on the ground’ support. This paper presents a new, distributed model of academic support and development for Sessional academics at Queensland University of Technology. Entitled the Sessional Academic Success program, it employs the principles of distributed leadership. Experienced Sessional academics are trained and supported to assume roles as Sessional Academic Success Advisors within their schools. Complementing our central programs, they design bespoke, locally situated, peer-to-peer academic development for new Sessional teachers; provide ‘just in time’, safe and reliable advice; and build supportive communities of teaching practice in their local contexts. This distributed model re-envisages the forms and places of academic development and support. It helps ensure that new Sessional Academics are embraced by faculty life. And, recognizing that experienced Sessional Academics have much to contribute to the advancement of learning and teaching, it builds their capacity through leadership opportunities. As the designer/facilitator of the program and a Sessional Academic Success Advisor, the authors take a dialogic approach and together describe the design, implementation and outcomes of the program.

The Sessional Academic Success (SAS) project

The Sessional Academic Success (SAS) project is a sustainable, distributed model for supporting sessional staff at QUT. Developed by the Learning and Teaching Unit. SAS complements our Sessional Academic Program (SAP): a sequence of formal academic development workshops explained in complementary nomination. SAS recognises that while these programs are very well received and a crucial aspect of preparing and advancing sessional teachers, they are necessarily encapsulated in the moment of their delivery and are generic, as they address all faculties (with their varied cultures, processes and pedagogies). The SAS project extends this formal, centrally offered activity into local, ‘just in time’, ongoing support within schools. It takes a distributed leadership approach. Experienced sessional academics are recruited and employed as Sessional Academic Success Advisors (SASAs). They provide sessional staff in their schools with contextually specific, needs based, peer-to-peer development opportunities; one-on-one advice on classroom management and strategies for success; and help to trouble-shoot challenges. The SASAs are trained by the Learning and Teaching Unit co-ordinator, and ongoing support is provided centrally and by school-based co-ordinators. This team approach situates the SASAs at the centre of an organisation map (see diagram of support relationships below). The SAS project aims to support sessional staff in their professional development by: • Offering contextual, needs-based support at school level by harnessing local expertise; • Providing further development opportunities that are local and focal; SAS aims to retain Sessional Staff by: • Responding to self-nominated requests for support and ‘just in time’, safe and reliable advice in times of need; • Building sessional staff confidence through help with dealing with challenges from a trusted peer; • Building a supportive academic community for sessional staff, which helps them feel a part of faculty life, and a community of teaching practice. SAS aims to support sessional staff in the development of academic teaching careers by: • Recognising the capacity of experienced sessional staff to support their peers in ways that are unique, valuable and valued and providing the agency to do so; • Providing career advancement and leadership opportunities for sessional staff. SAS takes unique approaches within each school using strategies such as: • Welcomes and schools orientation by SASAs; • Regular check ins; face-to-face advice and online support; • Compiling local resources to complement university wide resources. • Sessional-to-sessional ‘just in time’ training (eg. assessment and marking when marking commences); • Peer feedback and mentoring (the opportunities to sit in more experiences sessionals’ classes; • Sessional staff awards (nominated by students); • Communities of practice to discuss topics and issues with a view to (and support for) publishing on learning and teaching. In these ways, SASAs complement support offered by unit coordinators, administrators, and the Learning and Teaching Unit. Pairing senior and ‘understudy’ advisors ensures a line of succession, sustainability and continuity. A pilot program commenced in 2012 involving three schools (Psychology and Social Work; Electrical Engineering and Computer Science; Media, Entertainment and Creative Arts). It will be expanded across schools in 2013.

Pitfalls in the use of kappa when interpreting agreement between multiple raters in reliability studies

OBJECTIVE To compare different reliability coefficients (exact agreement, and variations of the kappa (generalised, Cohen's and Prevalence Adjusted and Biased Adjusted (PABAK))) for four physiotherapists conducting visual assessments of scapulae. DESIGN Inter-therapist reliability study. SETTING Research laboratory. PARTICIPANTS 30 individuals with no history of neck or shoulder pain were recruited with no obvious significant postural abnormalities. MAIN OUTCOME MEASURES Ratings of scapular posture were recorded in multiple biomechanical planes under four test conditions (at rest, and while under three isometric conditions) by four physiotherapists. RESULTS The magnitude of discrepancy between the two therapist pairs was 0.04 to 0.76 for Cohen's kappa, and 0.00 to 0.86 for PABAK. In comparison, the generalised kappa provided a score between the two paired kappa coefficients. The difference between mean generalised kappa coefficients and mean Cohen's kappa (0.02) and between mean generalised kappa and PABAK (0.02) were negligible, but the magnitude of difference between the generalised kappa and paired kappa within each plane and condition was substantial; 0.02 to 0.57 for Cohen's kappa and 0.02 to 0.63 for PABAK, respectively. CONCLUSIONS Calculating coefficients for therapist pairs alone may result in inconsistent findings. In contrast, the generalised kappa provided a coefficient close to the mean of the paired kappa coefficients. These findings support an assertion that generalised kappa may lead to a better representation of reliability between three or more raters and that reliability studies only calculating agreement between two raters should be interpreted with caution. However, generalised kappa may mask more extreme cases of agreement (or disagreement) that paired comparisons may reveal.

Complexity and the science of implementation in health IT — knowledge gaps and future visions

Objectives The intent of this paper is in the examination of health IT implementation processes – the barriers to and facilitators of successful implementation, identification of a beginning set of implementation best practices, the identification of gaps in the health IT implementation body of knowledge, and recommendations for future study and application. Methods A literature review resulted in the identification of six health IT related implementation best practices which were subsequently debated and clarified by participants attending the NI2012 Research Post Conference held in Montreal in the summer of 2012. Using the framework for implementation research (CFIR) to guide their application, the six best practices were applied to two distinct health IT implementation studies to assess their applicability. Results Assessing the implementation processes from two markedly diverse settings illustrated both the challenges and potentials of using standardized implementation processes. In support of what was discovered in the review of the literature, “one size fits all” in health IT implementation is a fallacy, particularly when global diversity is added into the mix. At the same time, several frameworks show promise for use as “scaffolding” to begin to assess best practices, their distinct dimensions, and their applicability for use. Conclusions Health IT innovations, regardless of the implementation setting, requires a close assessment of many dimensions. While there is no “one size fits all”, there are commonalities and best practices that can be blended, adapted, and utilized to improve the process of implementation. This paper examines health IT implementation processes and identifies a beginning set of implementation best practices, which could begin to address gaps in the health IT implementation body of knowledge.

FixVegas : facilitating multi-directional communication between government officials and citizens to support urban planning in the city of Brisbane

The goal of this project was to develop a mobile application for the iOS platform, that would support the partner of this project, the Brisbane City Council, in stronger engage citizens in participating in urban planning and development projects. The resulting application is an extended version of FixVegas, a system that allows citizens to report maintenance request to the Brisbane City Council through their smartphone. The new version of the system makes all incoming requests publicly available within the application, allows users to support, comment or disapprove of these. As an addition, the concept of the idea has been introduced. Citizens can submit suggestions for improving the city to the municipality, discuss them with other fellow citizens and, ideally, also with Council representatives. The city officials as well are provided with the ability of publishing development project as an idea and let citizens deliberate it. This way, bidirectional communication between these two parties is created. A web interface complements the iPhone application. The system has been developed after the principle of User Centered Design, by assessing user needs, creating and evaluating prototypes and conducting a user study. The study showed that FixVegas2 has been perceived as an enhancement compared to the previous version, and that the idea concept has been received on a positive note. Indepth questions, such as the influence the system could have on community dynamics or the public participation in urban planning projects could only hardly investigated. However, these findings can be achieved by the alternative study designs that have been proposed.

How to guarantee compliance between workflows and product lifecycles?

Product Lifecycle Management (PLM) systems are widely used in the manufacturing industry. A core feature of such systems is to provide support for versioning of product data. As workflow functionality is increasingly used in PLM systems, the possibility emerges that the versioning transitions for product objects as encapsulated in process models do not comply with the valid version control policies mandated in the objects’ actual lifecycles. In this paper we propose a solution to tackle the (non-)compliance issues between processes and object version control policies. We formally define the notion of compliance between these two artifacts in product lifecycle management and then develop a compliance checking method which employs a well-established workflow analysis technique. This forms the basis of a tool which offers automated support to the proposed approach. By applying the approach to a collection of real-life specifications in a main PLM system, we demonstrate the practical applicability of our solution to the field.

Stress, lifestyle and quality of life in midlife and older Australian women : results from the stress and the health of women study

Background Chronic psychological stress may pose a serious threat to health, although the mechanisms are not fully understood. This study examines the impact of stress on modifiable lifestyle factors, depressive symptoms, health-related quality of life (HRQOL) and chronic illness in older Australian women. Methods Cross-sectional data were collected from a random sample of 181 older adults aged 60-70 years from rural and urban areas of South-East Queensland, Australia. We used structural equation modelling to examine associations between stress, modifiable lifestyle factors, HRQoL, and chronic illness. Findings Parameter estimates show that older women who reported life stressors where they felt helpless and feared for their life (high magnitude stressors) also reported higher body mass index (p = 0.03) and more chronic illness (p <0.01). In contrast, duration of exposure to life stressors was associated with higher depressive symptom scores (CES-D, p = 0.02) and sleep disturbance scores (p <0.01). Conclusions Our findings support the link between traumatic personal histories (exposure to high magnitude stressors) and unhealthy lifestyle factors. Findings highlight the need for more research on how stress reduction healthy lifestyle and positive coping strategies can be used to reduce the effects of high magnitude stress on health-related quality of life and chronic illness.

A reference station-based GNSS computing mode to support unified precise point positioning and real-time kinematic services

Currently, the GNSS computing modes are of two classes: network-based data processing and user receiver-based processing. A GNSS reference receiver station essentially contributes raw measurement data in either the RINEX file format or as real-time data streams in the RTCM format. Very little computation is carried out by the reference station. The existing network-based processing modes, regardless of whether they are executed in real-time or post-processed modes, are centralised or sequential. This paper describes a distributed GNSS computing framework that incorporates three GNSS modes: reference station-based, user receiver-based and network-based data processing. Raw data streams from each GNSS reference receiver station are processed in a distributed manner, i.e., either at the station itself or at a hosting data server/processor, to generate station-based solutions, or reference receiver-specific parameters. These may include precise receiver clock, zenith tropospheric delay, differential code biases, ambiguity parameters, ionospheric delays, as well as line-of-sight information such as azimuth and elevation angles. Covariance information for estimated parameters may also be optionally provided. In such a mode the nearby precise point positioning (PPP) or real-time kinematic (RTK) users can directly use the corrections from all or some of the stations for real-time precise positioning via a data server. At the user receiver, PPP and RTK techniques are unified under the same observation models, and the distinction is how the user receiver software deals with corrections from the reference station solutions and the ambiguity estimation in the observation equations. Numerical tests demonstrate good convergence behaviour for differential code bias and ambiguity estimates derived individually with single reference stations. With station-based solutions from three reference stations within distances of 22–103 km the user receiver positioning results, with various schemes, show an accuracy improvement of the proposed station-augmented PPP and ambiguity-fixed PPP solutions with respect to the standard float PPP solutions without station augmentation and ambiguity resolutions. Overall, the proposed reference station-based GNSS computing mode can support PPP and RTK positioning services as a simpler alternative to the existing network-based RTK or regionally augmented PPP systems.

Differences between first episode schizophrenia and schizoaffective disorder

Background: The diagnostic and clinical overlap between schizophrenia and schizoaffective disorder is an important nosological issue in psychiatry that is yet to be resolved. The aim of this study was to compare the clinical and functional characteristics of an epidemiological treated cohort of first episode patients with an 18-month discharge diagnosis of schizophrenia (FES) or schizoaffective disorder (FESA). Methods: This study was part of the larger First Episode Psychosis Outcome Study (FEPOS) which involved a medical file audit study of all 786 patients treated at the Early Psychosis Prevention and Intervention Centre between 1998 and 2000. Of this cohort, 283 patients had a 18-month discharge diagnosis of FES and 64 had a diagnosis of FESA. DSM-IV diagnoses, clinical and functional ratings were derived and validated by two consultant psychiatrists. Results: Compared to FES patients, those with FESA were significantly more likely to have a later age of onset (p=.004), longer prodrome (p=.020), and a longer duration of untreated psychosis (p<.001). At service entry, FESA patients presented with a higher illness severity (p=.020), largely due to the presence of more severe manic symptoms (p<.001). FESA patients also had a greater number of subsequent inpatient admissions (p=.017), had more severe depressive symptoms (p=.011), and higher levels of functioning at discharge. Discussion: The findings support the notion that these might be considered two discernable disorders; however, further research is required to ascertain the ways and extent to which these disorders are discriminable at presentation and over time.

Biological markers of stress in pediatric acute burn injury

BACKGROUND Burns and their associated wound care procedures evoke significant stress and anxiety, particularly for children. Little is known about the body's physiological stress reactions throughout the stages of re-epithelialization following an acute burn injury. Previously, serum and urinary cortisol have been used to measure stress in burn patients, however these measures are not suitable for a pediatric burn outpatient setting. AIM To assess the sensitivity of salivary cortisol and sAA in detecting stress during acute burn wound care procedures and to investigate the body's physiological stress reactions throughout burn re-epithelialization. METHODS Seventy-seven participants aged four to thirteen years who presented with an acute burn injury to the burn center at the Royal Children's Hospital, Brisbane, Australia, were recruited between August 2011 and August 2012. RESULTS Both biomarkers were responsive to the stress of burn wound care procedures. sAA levels were on average 50.2U/ml higher (p<0.001) at 10min post-dressing removal compared to baseline levels. Salivary cortisol levels showed a blunted effect with average levels at ten minutes post dressing removal decreasing by 0.54nmol/L (p<0.001) compared to baseline levels. sAA levels were associated with pain (p=0.021), no medication (p=0.047) and Child Trauma Screening Questionnaire scores at three months post re-epithelialization (p=0.008). Similarly, salivary cortisol was associated with no medication (p<0.001), pain scores (p=0.045) and total body surface area of the burn (p=0.010). CONCLUSION Factors which support the use of sAA over salivary cortisol to assess stress during morning acute burn wound care procedures include; sensitivity, morning clinic times relative to cortisol's diurnal peaks, and relative cost.

An investigation of schizotypy in injecting amphetamine users

A fully dimensional view of psychiatric disorder conceptualises schizotypy as both a continuous personality trait and an underlying vulnerability to the development of psychotic illness. Such a model would predict that the structure of schizotypal traits would closely parallel the structure of schizophrenia or psychosis. This was investigated in injecting amphetamine users (N = 322), a clinical population who have high rates of acute psychotic episodes and subclinical schizotypal experiences. Schizotypy was assessed using the Oxford-Liverpool Inventory of Feelings and Experiences (O-LIFE), and psychotic symptoms were assessed using the Brief Psychiatric Rating Scale (BPRS). Using confirmatory factor analysis, O-LIFE subscale scores were mapped onto latent variables with their more clinical counterparts from the BPRS. A four-factor model comprising positive schizotypy, disorganisation, negative schizotypy, and disinhibition provided the best model fit, consistent with prior research into the structure of schizotypy. The model provided a good fit to the data, lending support to the theory that schizotypy and psychotic symptoms map onto common underlying dimensions.

Self-efficacy partially mediates between social support and health-related quality of life in family caregivers for dementia patients in Shanghai

Background: There is a paucity of research assessing health-related quality of life (HRQoL) and self-efficacy in caregivers of relatives with dementia in mainland China. Aims: To compare the level of HRQoL between caregivers and the general population in mainland China and to assess the role of caregiver self-efficacy in the relationship between caregiver social support and HRQoL. Methods: A cross-sectional study was conducted in Shanghai, China. The caregivers were recruited from the outpatient department of a teaching hospital. A total of 195 participants were interviewed, using a survey package including the Chinese version of the 36-Item Short-Form Health Survey (SF-36), demographic data, the variables associated with the impairments of care recipients, perceived social support and caregiver self-efficacy. The caregivers' SF-36 scores were compared with those of the general population in China. Results: The results indicated that the HRQoL of the caregivers was poorer compared with that of the general population when matched for age and gender. Multiple regression analyses revealed that caregiver self-efficacy is a partial mediator between social support and HRQoL, and a partial mediator between behavioral and psychological symptoms of dementia (BPSD) and caregiver mental health. Conclusion: Assisting with managing BPSD and enhancing caregiver self-efficacy can be considered integral parts of interventions to improve caregiver HRQoL.