A control of gas-vacuolate cyanobacteria

The cyanobacteria that cause problems in water supply are principally the colonial forms that are buoyed up by gas vesicles. The success of these organisms is due, in part, to their gas vesicles, which enable them to perform vertical migrations or to maintain themselves in the euphotic zone. The gas vesicles are also the root cause of the problems. In calm periods they cause the cyanobacteria to float to the water surface forming noxious scums, and they may prevent the colonies from sedimenting in water treatment plants. Gas vesicles are hollow, gas-filled structures; they are rigid but can be collapsed by the application of pressure. Their critical collapse pressure is influenced by their dimensions, which vary in different organisms. Gas vesicles are formed by the assembly of two types of protein, which determine their mechanical and physical properties. Methods for collapsing gas vesicles in natural populations of cyanobacteria will be considered. They may have application to the control of cyanobacteria in water supply.

Impacto das motocicletas na qualidade do ar das grandes cidades

O crescimento do número de motocicletas nas grandes cidades, em função de fatores como o baixo custo e a alta mobilidade nos centros urbanos, tem sido considerado um importante fator de deterioração da qualidade do ar. Nesse contexto, o monitoramento das emissões gasosas provenientes do escapamento desses veículos é fundamental para o conhecimento da contribuição dessa classe de transporte no agravamento da poluição atmosférica. A partir dessas informações tornam-se possíveis o monitoramento e o controle da qualidade do ar. Para tanto, amostras das emissões de diferentes motocicletas foram coletadas, por meio de dinamômetro, e analisadas por cromatografia gasosa. As emissões das motocicletas foram utilizadas em conjunto com dados meteorológicos utilizando o modelo de trajetória OZIPR e o mecanismo químico SAPRC para demonstrar o impacto na formação do ozônio troposférico na região. As simulações indicam que a concentração de ozônio na troposfera poderá ultrapassar o padrão nacional estabelecido pela Resolução CONAMA 03/90 em até três anos. Além disso, acrescenta-se que as taxas de emissões de compostos legislados emitidos pelas motocicletas utilizadas neste estudo (HC, CO e NOx) já atendem aos níveis preconizados em todas as fases do PROMOT. Assim, além da adoção do PROMOT, se fazem necessárias medidas adicionais para o gerenciamento da emissão de poluentes provindos de fontes móveis. A alteração do tipo de combustível ou até mesmo da fonte de energia, elétrica, por exemplo, seria uma alternativa para o controle da poluição atmosférica

Remediação de solos e lençóis freáticos em postos de gasolina via processo de fenton: estudo de caso

Alguns cientistas ambientais prevêem que a poluição dos solos será um dos maiores legados com grandes impactos para as gerações futuras, pois atualmente ainda existe desconhecimento das fontes poluidoras e da sua extensão. O Brasil, devido a sua extensão territorial, suas bacias hidrográficas, número de postos de abastecimentos e controles ambientais ainda ineficazes, está muito exposto a esse tipo de poluição. Atualmente, há no Brasil mais de 34.300 postos de combustíveis, com volume de 65.000.000 m3 de gasolina e diesel consumidos anualmente, conforme dados da Agência Nacional do Petróleo Gás Natural e Biocombustíveis , ANP, em 2008. Sendo assim, a exposição e contaminação dos solos e dos lençóis freáticos com constituintes aromáticos do diesel e gasolina torna-se um sério problema ambiental. Dentro deste grupo, encontram-se o benzeno, tolueno, xileno, conhecido como BTEX e os hidrocarbonetos policíclicos aromáticos, conhecido como PAH. Este trabalho tem como objetivo estudar a remediação in-situ de um posto de combustíveis na região do ABC Paulista, no Estado de São Paulo. Aplicando-se a técnica de Processo Oxidativo Avançado via reagente de Fenton (H2O2 + Fe2+ → Fe3+ + OH- + OH . ), o radical hidroxila gerado mineraliza compostos aromáticos, decompondo-os definitivamente. Amostras de água do posto em estudo apresentavam elevados teores de BTEX e PAH, 2,58 mg.L-1 e 0,298 mg.L-1 respectivamente, estando em níveis não tolerados pelo órgão ambiental paulista CETESB sendo necessária a intervenção para tratamento da área. Com os níveis de poluentes e o perfil hidrogeológico identificados, a remediação foi iniciada com injeções no solo de peróxido de hidrogênio a 8%v.v, FeSO4 a 0,40 mg.L-1 e solução à base de NPK (nitrogênio, fósforo e nitrogênio) a 100 mg.L-1 como nutrientes para os microorganismos do solo. Estes valores são provenientes de experimentos anteriores e tratamentos já realizados. Foram conduzidas campanhas de injeção trimestrais com 100 litros desta solução completa como reagente , e medições trimestrais de BTEX, PAH e outros parâmetros de controle, que foram indicando o sucesso do tratamento. Após 18 meses o local foi considerado tratado pelo órgão ambiental, onde monitoramentos semestrais estão em continuidade para garantir o resultado do tratamento e das ações corretivas. Assim, o estudo real da remediação de solos contaminados com os poluentes orgânicos via processo de Fenton, com concentração de H2O2 a 8%v/v, e FeSO4 a 0,40 mg.L-1 demonstrou-se uma técnica de sucesso. O entendimento dos resultados da remediação, mesmo sujeitos aos fenômenos naturais, como intempéries e chuvas, é uma experiência grande, pois por mais reais que simulações em laboratório possam ser, é muito difícil incluir nestes sistemas, as variações que um tratamento real está exposto

Propiedades básicas de materiales soporte y parámetros de control en biofiltración.

[ES]En la problemática medioambiental generada por la contaminación atmosférica hay tres aspectos que marcan las directrices de actuación institucional: la presión social, la legislación vigente y la tecnología disponible. En cuanto a este último aspecto, la biofiltración es una tecnología eficaz, asequible y sostenible basada en la actividad biodegradadora de microorganismos específicos adheridos a la superficie de un material soporte que constituye el lecho del biofiltro. La elección de un material soporte adecuado es de especial importancia para asegurar el correcto funcionamiento de los biofiltros. Esta decisión está basada en las propiedades intrínsecas del material que deben ser analizadas previamente a su uso. En este proyecto se ha seleccionado cuales son estas propiedades básicas a partir de una revisión bibliográfica, destacando la capacidad de retención de humedad, superficie específica, porosidad, y estabilidad física y química del material. En este trabajo, también se han fijado los parámetros de control que deben ser medidos de forma rutinaria en un biofiltro para asegurar la eficacia del tratamiento de descontaminación. En base a la información bibliográfica recopilada, se ha concluido que los parámetros básicos son pH, temperatura, contenido de humedad del lecho y pérdidas de carga. A nivel experimental, se han medido las pérdidas de carga generadas en biofiltros empacados con tres materiales soportes que son de especial interés para una investigación posterior a desarrollar por el grupo Biofiltración de la Universidad del País Vasco (UPV/EHU). Durante el período de arranque inicial de los tres biofiltros, las pérdidas de carga medidas fueron muy bajas en los tres casos, aunque algo superiores cuando la alimentación era en sentido ascendente frente al flujo descendente. Sin embargo, cuando se midieron las pérdidas de carga bajo condiciones de encharcamiento del lecho, que es una de las situaciones más problemáticas en un biofiltro, todos los soportes presentaron un aumento puntual de la pérdida de carga aunque la tendencia en los días posteriores fue claramente descendente, recuperando valores de operación habituales. La comparativa del comportamiento frente a las pérdidas de carga permitió seleccionar el soporte más idóneo de los tres analizados, aunque los otros dos podrían ser alternativas viables en caso de sustitución.

Biotic vs. Abiotic Control of Decomposition: A Comparison of the Effects of Simulated Extinctions and Changes in Temperature

The loss of species is known to have significant effects on ecosystem functioning, but only recently has it been recognized that species loss might rival the effects of other forms of environmental change on ecosystem processes. There is a need for experimental studies that explicitly manipulate species richness and environmental factors concurrently to determine their relative impacts on key ecosystem processes such as plant litter decomposition. It is crucial to understand what factors affect the rate of plant litter decomposition and the relative magnitude of such effects because the rate at which plant litter is lost and transformed to other forms of organic and inorganic carbon determines the capacity for carbon storage in ecosystems and the rate at which greenhouse gasses such as carbon dioxide are outgassed. Here we compared how an increase in water temperature of 5 degrees C and loss of detritivorous invertebrate and plant litter species affect decomposition rates in a laboratory experiment simulating stream conditions. Like some prior studies, we found that species identity, rather than species richness per se, is a key driver of decomposition, but additionally we showed that the loss of particular species can equal or exceed temperature change in its impact on decomposition. Our results indicate that the loss of particular species can be as important a driver of decomposition as substantial temperature change, but also that predicting the relative consequences of species loss and other forms of environmental change on decomposition requires knowledge of assemblages and their constituent species' ecology and ecophysiology

Avaliação de emissões fugitivas de biogás na camada de cobertura do aterro sanitário da CTR de Nova Iguaçu e do Lixão de Seropédica, Rio de Janeiro.

No Brasil, se espera ter até 2014, de acordo com o prazo da Política Nacional de Resíduos Sólidos, todos os lixões erradicados e os resíduos sólidos urbanos gerados depositados em aterros sanitários. Atualmente, os projetos de aterros sanitários dão oportunidade para um nicho de mercado, o da fonte de geração de energia. Um parâmetro de controle da poluição do ar causada pelos aterros sanitários são as chamadas camadas de cobertura. Nesse contexto, é de fundamental importância o estudo de camadas de cobertura de resíduos por ser um importante elemento de projeto para evitar ou minimizar a poluição do ar devido aos gases gerados em aterros sanitários de resíduos sólidos, já que é o elo existente entre o ambiente interno dos resíduos e a atmosfera. A presente pesquisa aborda o comportamento dos gases em relação à camada de cobertura existentes na CTR de Nova Iguaçu e no Lixão remediado de Seropédica. Foram realizados ensaios de Placa de Fluxo, medição de pressão e concentração dos gases no contato solo-resíduo e emissões dos gases pelos drenos, além das análises de solo in situ e em laboratório. Os ensaios foram realizados de outubro a novembro de 2012. Os resultados indicaram uma inexistência de fluxo de gases pela camada de cobertura, que possui 1,10 m de espessura, do lixão de Seropédica, sendo encontrado apenas fluxo nos drenos. Na CTR Nova Iguaçu, foi verificada que praticamente a inexistência de fluxo de gases com o sistema de gás ligado, mesmo possuindo uma camada de cobertura de 0,8 m.

Evaluation of the economic costs and benefits of methods for reducing nutrient loads to the Gulf of Mexico: Topic 6 Report for the Integrated Assessment on Hypoxia in the Gulf of Mexico.

In this report we analyze the Topic 5 report’s recommendations for reducing nitrogen losses to the Gulf of Mexico (Mitsch et al. 1999). We indicate the relative costs and cost-effectiveness of different control measures, and potential benefits within the Mississippi River Basin. For major nonpoint sources, such as agriculture, we examine both national and basin costs and benefits. Based on the Topic 2 economic analysis (Diaz and Solow 1999), the direct measurable dollar benefits to Gulf fisheries of reducing nitrogen loads from the Mississippi River Basin are very limited at best. Although restoring the ecological communities in the Gulf may be significant over the long term, we do not currently have information available to estimate the benefits of such measures to restore the Gulf’s long-term health. For these reasons, we assume that measures to reduce nitrogen losses to the Gulf will ultimately prove beneficial, and we concentrate on analyzing the cost-effectiveness of alternative reduction strategies. We recognize that important public decisions are seldom made on the basis of strict benefit–cost analysis, especially when complete benefits cannot be estimated. We look at different approaches and different levels of these approaches to identify those that are cost-effective and those that have limited undesirable secondary effects, such as reduced exports, which may result in lost market share. We concentrate on the measures highlighted in the Topic 5 report, and also are guided by the source identification information in the Topic 3 report (Goolsby et al. 1999). Nonpoint sources that are responsible for the bulk of the nitrogen receive most of our attention. We consider restrictions on nitrogen fertilizer levels, and restoration of wetlands and riparian buffers for denitrification. We also examine giving more emphasis to nitrogen control in regions contributing a greater share of the nitrogen load.

Marine pollution in the Indian Ocean: problems, prospects and perspectives

Following a brief outline of the physiography of the Indian Ocean, an examination is made of the current situation regarding contamination of the environment. Prominent marine pollutants and the consequences of the marine disposal are discussed, considering in particular oil pollution, heavy metal pollution, agricultural wastes and domestic wastes. Research activities conducted in the area investigating the levels of marine pollution are detailed, and an evaluation made of future prospects concerning the monitoring and control of pollution.

Technical report on the environmental monitoring of the cage area at the Source of the Nile (SON) Fish Farm for quarter 1: January-March 2015

Source of the Nile (SON) fish farm is located at Bugungu in Napoleon Gulf, northern Lake Victoria. The proprietors of the farm have a collaborative arrangement with NaFIRRI, a lead agency in fisheries research and innovations, to undertake quarterly environment monitoring surveys at the farm. The agreed areas for monitoring are: selected physico-chemical parameters (i.e. temperature, dissolved oxygen, pH, conductivity, secchi depth); total suspended solids (TSS); nutrient status; BOD5) and biological parameters (i.e. algae, zooplankton, macro-benthos and fish). Water and biological samples as well as field measurements were taken at 3 sites: within the fish cage rows (WIC/experimental), upstream (USC/control) and downstream (DSC) of the fish cages. The key research question was: Does fish cage operations have impacts on the water quality and aquatic biota in and around the SON cage fish farm? The environment monitoring surveys were projected to cover a full calendar year (i.e. from January to December). The first surveys were undertaken in 2011 and have continued on an annual basis since then. The present report presents field observations made for the fourth quarter survey undertaken in November 2014 and provides a scientific interpretation and discussion of the results with reference to possible impacts of the cage facilities to the water environment and the different aquatic biota in and around the fish cage site.

Illegal fishing of inland water bodies of Nigeria: Kainji experience

It is a common knowledge that illegal fishing which includes use of wrong gears, explosives, excessive exploitation of choice stocks, enhancement and stocking of water body and pollution has devastating effects on the critical biomass of fish biodiversity and livelihood activities associated with fishing. Efforts worldwide to arrest these menace are significant because it has been found that illegal fishing has made fishing non sustainable, resulted in poor fishermen catches, and exacerbated the use of illegal gears in an effort to a must catch. Conflict between fisher folk and policies has continued to generate different strategies in the control of illegal fishing. Some of these strategies at regional and National levels include creation and implementation of fisheries laws, fishing edicts, code of conduct for responsible fisheries, policing of inland water bodies, capacity building and capability through training of fishermen, creating necessary awareness, arrest and punishment of offenders. There are also other initiative on conservation and management of freshwater ecosystems which have interrelation with illegal fishing. This paper examines efforts in promoting and boosting the fisheries of Lake Kainji, through creating necessary awareness, campaign visits, radio programmes, gear control, reward systems, integration and diversification of livelihood activities, community based management and policing. It further analyses what is working, problems, and prospect of fisheries laws, the need to integrate factors of political policies, other global initiative on water management for people and nature. Recommendations on strategies including protection of fishing grounds, establishment of catch data base, integration of other intervention as alternative source of income to enhance livelihood, reduce fishing pressure, and capacity building of fisher folks, development of rules and regulations that is community based are highlighted.

Effects of cage fish culture on water quality and selected biological communities in northern Lake Victoria, Uganda

Growing of fish in cages is currently practiced in Uganda and was first introduced in northern Lake Victoria in 2010. An environment monitoring study was undertaken at Source of the Nile, a private cage fish farm, in Napoleon gulf, northern Lake Victoria. In-situ measurements of key environmental (temperature, dissolved oxygen, pH and conductivity) and biological (algae, zooplankton, macro-benthos) variables were made at three transects: Transect 1- the site with fish cages (WC); transect 2- upstream of the fish cages (USC-control) and Transect 3- downstream of the cages (DSC). Upstream and Downstream sites were located approximately 1.0 km from the fish cages. Environment parameters varied spatially and temporally but were generally within safe ranges for freshwater habitats. Higher concentrations of SRP (0.015-0.112 Mg/L) occurred at USC during February, September and at DSC in November; NO2-N (0.217- 0.042 mg/L) at USC and DSC in February and November; NH4-N (0.0054- 0.065 Mg/L) at WC and DSC in February, May and November. Algal bio-volumes were significantly higher at WC (F (2,780)=4.619; P=0.010). Zooplankton species numbers were consistently lower at WC with a significant difference compared to the control site (P=0.032). Macro-benthos abundance was consistently higher at the site with cages where mollusks and low-oxygen and pollution-tolerant chironomids were the dominant group. Higher algal biomass, concentration of low-oxygen/pollution-tolerant macro-benthos and depressed zooplankton diversity at WC suggested impacts from the fish cages on aquatic biota.

Eccentricity effects on acoustic radiation from a spherical source suspended within a thermoviscous fluid sphere.

Acoustic radiation from a spherical source undergoing angularly periodic axisymmetric harmonic surface vibrations while eccentrically suspended within a thermoviscous fluid sphere, which is immersed in a viscous thermally conducting unbounded fluid medium, is analyzed in an exact fashion. The formulation uses the appropriate wave-harmonic field expansions along with the translational addition theorem for spherical wave functions and the relevant boundary conditions to develop a closed-form solution in form of infinite series. The analytical results are illustrated with a numerical example in which the vibrating source is eccentrically positioned within a chemical fluid sphere submerged in water. The modal acoustic radiation impedance load on the source and the radiated far-field pressure are evaluated and discussed for representative values of the parameters characterizing the system. The proposed model can lead to a better understanding of dynamic response of an underwater acoustic lens. It is equally applicable in miniature transducer analysis and design with applications in medical ultrasonics.

Initial modelling and controller design for active control of spacecraft microvibrations

Microvibrations, at frequencies between 1 and 1000 Hz, generated by on board equipment, propagate throughout a spacecraft structure affecting the performance of sensitive payloads. The purpose of this work is to investigate strategies to model and reduce these dynamic disturbances by active control. Initial studies were performed by considering a mass loaded panel where the disturbance excitation source consisted of point forces, the objective being to minimise the displacement at an arbitrary output location. Piezoelectric patches acting as sensors and actuators were used. The equations of motion are derived by using Lagrange's equation with modal shapes as Ritz functions. The number of sensors/actuators and their location is variable. The set of equations obtained is then transformed into state variables and some initial controller design studies have been undertaken. These are based on feedback control implemented using a full state feedback and an observer which reconstructs the state vector from the available sensor signal. Here, the basics behind the structural modelling and controller design will be described. This preliminary analysis will also be used to identify short to medium term further work.

Carbon source/sink function of a subtropical, eutrophic lake determined from an overall mass balance and a gas exchange and carbon burial balance

Although studies on carbon burial in lake sediments have shown that lakes are disproportionately important carbon sinks, many studies on gaseous carbon exchange across the water-air interface have demonstrated that lakes are supersaturated with CO2 and CH4 causing a net release of CO2 and CH4 to the atmosphere. In order to more accurately estimate the net carbon source/sink function of lake ecosystems, a more comprehensive carbon budget is needed, especially for gaseous carbon exchange across the water-air interface. Using two methods, overall mass balance and gas exchange and carbon burial balance, we assessed the carbon source/sink function of Lake Donghu, a subtropical, eutrophic take, from April 2003 to March 2004. With the overall mass balance calculations, total carbon input was 14 905 t, total carbon output was 4950 1, and net carbon budget was +9955 t, suggesting that Lake Donghu was a great carbon sink. For the gas exchange and carbon burial balance, gaseous carbon (CO2 and CH4) emission across the water-air interface totaled 752 t while carbon burial in the lake sediment was 9477 t. The ratio of carbon emission into the atmosphere to carbon burial into the sediment was only 0.08. This low ratio indicates that Lake Donghu is a great carbon sink. Results showed good agreement between the two methods with both showing Lake Donghu to be a great carbon sink. This results from the high primary production of Lake Donghu, substantive allochthonous carbon inputs and intensive anthropogenic activity. Gaseous carbon emission accounted for about 15% of the total carbon output, indicating that the total output would be underestimated without including gaseous carbon exchange. (C) 2007 Elsevier Ltd. All rights reserved.

Control of material transport through pulse shape manipulation-a development toward designer pulses

The variety of laser systems available to industrial laser users is growing and the choice of the correct laser for a material target application is often based on an empirical assessment. Industrial master oscillator power amplifier systems with tuneable temporal pulse shapes have now entered the market, providing enormous pulse parameter flexibility in an already crowded parameter space. In this paper, an approach is developed to design interaction parameters based on observations of material responses. Energy and material transport mechanisms are studied using pulsed digital holography, post process analysis techniques and finite-difference modelling to understand the key response mechanisms for a variety of temporal pulse envelopes incident on a silicon (1/1/1) substrate. The temporal envelope is shown to be the primary control parameter of the source term that determines the subsequent material response and the resulting surface morphology. A double peak energy-bridged temporal pulse shape designed through direct application of holographic imaging data is shown to substantially improve surface quality. © 2014 IEEE.