Variation of genotype and prevalence of Noro virus in U.S. students in Mexico with Traveler's Diarrhea, summer of 2004 and 2005

Noro virus, a positive single stranded RNA virus has been identified as a major etiologic agent in food borne gastroenteritis and diarrheal diseases. The emergence of this organism as a major non-bacterial cause in such outbreaks is partly due to the improved diagnostic tools like Reverse Transcription Polymerase chain reaction (RTPCR) that enable its detection. Noro virus accounts for nearly 96% of non-bacterial gastroenteritis outbreaks in US (1). Travelers' Diarrhea (TD) has remained a constant public health risk in the developed nations for decades and bacteria like Entero toxigenic Escherichia coli, Entero aggregative Escherichia coli have been described as the main etiologic agents for TD (2-4). A possible viral contribution to TD has been discovered in two studies (5, 6). The current study was designed to determine the prevalence of Noro virus in a population of 107 US students with TD acquired in Mexico in 2005 and to compare the prevalence to the prevalence of Noro virus in a similar study done in 2004. This study involved the testing of clinical stool specimens from 107 subjects in 2005 for the presence of Noro virus using RTPCR. The prevalence of Noro virus in 2004 used for comparison to 2005 data was obtained from published data (5). All subjects were recruited as TD subjects in a randomized, double-blinded clinical trial comparing a standard three day dosing of Rifaximin with and without an anti motility drug Loperamide. The prevalence of Noro virus geno group I was similar in both years, but geno group II prevalence differed across the two years (p = 0.003). This study finding suggests that the prevalence of Noro virus geno groups varies with time even within a specific geographic location. This study emphasizes the need for further systematic epidemiologic studies to determine the molecular epidemiology and the prevalence patterns of different geno groups of this virus. These are essential to planning and implementation of public health measures to lessen the burden of TD due to Noro virus infection among US travelers. ^

The epidemiology of Hepatitis B and Hepatitis C virus infection among college students who are not US/Canadian born in Houston

Introduction. A vast majority of studies conducted in both developed and developing nations have focused on the epidemiology of HBV (Hepatitis B virus) and HCV (Hepatitis C virus) in high-risk populations; low-risk populations have been neglected. Recently Hwang et al conducted a unique large cross-sectional study in American university students that focused on cosmetic procedures and drug use for acquiring these infections among a low-risk young adult population In Houston. ^ Methods. This study is a secondary data analysis of the cross-sectional study conducted by Hwang et al. Data for this anonymous study were collected from 7,960 college students, among whom were the 2,561 non US/Canadian born students included in this study. All students completed a self-administered questionnaire and provided a blood sample. The epidemiology of HBV/HCV and risk factors for acquiring HBV/HCV infection was studied by comparing those with HBV/HCV infection versus those without. Both univariate and multivariate logistic regression was used to analyze the data. ^ Results. Overall prevalence of HBV and HCV infections were 22% and 0.8% respectively. By multivariable analysis, the factors that were independently associated with increased prevalence of HBV infection were increasing age per year (OR=1.06, 95% C.I=1.04-1.08), Black or Asian race (OR=6.21, 95% C.I=3.14-12.27), history of household contact with hepatitis (OR=1.87, 95% C.I=1.15-3.05), and having sexual partner with hepatitis (OR=5.20, 95% C.I=1.5-18.00). For HCV these factors included increasing age per year (OR= 1.08, 95% C.I=1.03-1.14), history of blood transfusion prior to 1991 (OR=25.45, 95% C.I=7.58-85.40), and Injection drug use. (OR=78.15, 95% C.I=12.19-500.85). Cosmetic procedures like tattooing were not significant risk factors for either HBV or HCV infection. ^ Conclusions. In a low-risk adult foreign born population, cosmetic procedures are not significant risk factors for HBV or HCV infection. The prevention strategies of these infections in this population should focus on safe sexual practices/abstinence and HBV vaccination should be provided to adolescents and sexually active adults. ^

A cross-sectional study of disparities in suicide ideation between Hispanic and non-Hispanic white female adolescents

Suicide is recognized as a major public health and clinical problem in the United States. One fifth of adolescents in the United States seriously consider suicide each year, and about 8% of high school students attempt suicide at least once. Hispanic ethnicity constitutes a risk factor for suicidal ideation and suicide attempts, with Hispanic females at highest risk. Nevertheless, published studies on suicidal behavior in Hispanic female adolescents are extremely limited and focus on suicidal ideation in school samples. Given the severity of the problem and the paucity of information on this topic, more research on ethnic differences in suicidal ideation in community samples of high-risk children is urgently needed. This cross-sectional study delineated differences in suicide ideation between Hispanic female adolescents and non-Hispanic white female adolescents attending a mental health clinic and examined the association of ethnicity with suicide ideation independent of other known risk factors. Data were accrued between June 2004 and December 2008 in a Harris County Mental Health and Mental Retardation Association (MHMRA) clinic. Data were limited to adolescents who were Harris County Residents between the ages of 10 to 17 years when they were admitted to the clinic. The objective of this study was to determine whether differences in socio-demographic and clinical variables play a significant role in ethnic disparities in suicide ideation. A series of logistic regressions were performed to estimate the association between ethnicity and suicide ideation after controlling for potentially confounding factors. ^ Results showed an interaction between Hispanic ethnicity and having a history of treatment: Hispanic girls having history of treatment had lower odds of having suicide ideation than Hispanic girls without such a history. After adjusting for treatment history, family problems, substance use, juvenile justice involvement, current treatment, and age, Hispanic girls had 1.86 times the odds of having suicide ideation than non Hispanic girls (OR=1.86, 95% CI=0.88-1.46). Although additional studies on community samples of high risk adolescents are needed to verify these findings, our study highlights the fact that Hispanic girls are at significantly higher risk and need to be targeted for prevention and treatment efforts. ^

CIGARETTE SMOKING AMONG HIGH SCHOOL STUDENTS IN RURAL AREAS OF THAILAND

The purpose of this study was to identify the smoking prevalence among high school students in rural areas of Thailand and the factors associated with their smoking habits. The sample population was comprised of 946 volunteer students of both sexes enrolled in the twelfth grade classes of the 1981-82 school year in randomly chosen regional public high schools throughout the country. Data were obtained from a formal self-administered questionnaire survey. The comparisons were treated by classified smoking habits as "non-smoker," "trier," "ex-smoker," and "smoker."^ The study presented the low rate of cigarette smoking habits among female students, compared to male students. Significant differences of smoking-related habits were found among those who had exemplar models for smoking habits; fathers, siblings and peers were their reference groups. Parental approval was found to be a significant factor associated with students' smoking habits. The awareness of health hazards, the perceptions of the influence of cigarette advertisement, and the attitudes toward the concerns of government in cigarette manufacturing were also factors associated with cigarette smoking habits of high school subjects. ^

Understanding mental illness in Nigeria: Bringing culture and traditional medicine into mental health policy

One of the major challenges in treating mental illness in Nigeria is that the health care facilities and mental health care professionals are not enough in number or well equipped to handle the burden of mental illness. There are several barriers to treatment for individual Nigerians which include the following: such as the lack of understanding of the root causes of mental illness, lack of financial support to get mental treatment, lack of social support (family, friends, neighbors), the fear of stigmatization concerning being labeled as mentally ill or being in association with the mentally ill, and the consultation of traditional native healers who may be unknowingly prolonging illness, rather than addressing and treating them due to lack of formal education and standardization of their treatments. Another barrier is the non-health nature of the mental health services in Nigeria. Traditional healers are essentially the mental health system. The elderly, women, and children are the most vulnerable groups in times of strife and hardships. Their mental well-being must be taken into account as well as their special needs in times of personal or societal crisis. ^ Nigerian mental health policy is geared toward forming a mental health system, but in actuality only a mental illness care system is the observed result of the policy. The government of Nigeria has drafted a mental health policy, yet its actual implementation into the Nigerian health infrastructure and society waits to be materialized. The limited health legislation or policy implementations tend to favor those who have access to these urban areas and the facilities' health services. Nigerians living in rural areas are at a disadvantage; many of them may not even be aware of services available to help them understand and treat mental illness. Perhaps, government driven health interventions geared toward mental illness in rural areas would reach an underserved Nigerians and Africans in general. Issues with political instability and limited infrastructure often hinder crucial financial resources and legislation from reaching the people that are truly in need of governmental leadership in regards to mental health policy.^ Traditional healers are a severely untapped resource in the treatment of mental illness within the Nigerian population. They are abundant within Nigerian communities and are meeting a real need for the mentally ill. However, much can be done to remove the barriers that prevent the integration of traditional healers within the mental health system and improve the quality of care they administer within the population. Mental illness is almost exclusively coped with through traditional medicine practices. Mobilization and education from each strata of Nigerian society and government as well as input from the medical community can improve how traditional medicine is utilized as a treatment for clinical illness and help alleviate the heavy burden of mental illness in Nigeria. Currently, there is no existing policy making structure for a working mental health system in Nigeria, and traditional healers are not taken into account in any formulation of mental health policy. Advocacy for mental illness is severely inadequate due to fear of stigmatization, with no formally recognized national of regional mental health association.^

Prevalence of symptoms of neurotoxicity and potential occupational pesticide and solvent exposures among high school students in Starr County, Texas: A pilot study

Numerous harmful occupational exposures affect working teens in the United States. Teens working in agriculture and other heavy-labor industries may be at risk for occupational exposures to pesticides and solvents. The neurotoxicity of pesticides and solvents at high doses is well-known; however, the long term effects of these substances at low doses on occupationally exposed adolescents have not been well-studied. To address this research gap, a secondary analysis of cross-sectional data was completed in order to estimate the prevalence of self-reported symptoms of neurotoxicity among a cohort of high school students from Starr County, Texas, a rural area along the Texas-Mexico border. Multivariable linear regression was used to estimate the association between work status (i.e., no work, farm work, and non-farm work) and symptoms of neurotoxicity, while controlling for age, gender, Spanish speaking preference, inhalant use, tobacco use, and alcohol use. The sample included 1,208 students. Of these, the majority (85.84%) did not report having worked during the prior nine months compared to 4.80% who did only farm work, 6.21% who did only non-farm work, and 3.15% who did both types of work. On average, students reported 3.26 symptoms with a range from 0-16. The most commonly endorsed items across work status were those related to memory impairment. Adolescents employed in non-farm work jobs reported more neurotoxicity symptoms than those who reported that they did not work (Mean 4.31; SD 3.97). In the adjusted multivariable regression model, adolescents reporting non-farm work status reported an average of 0.77 more neurotoxicity symptoms on the Q16 than those who did not work (P = 0.031). The confounding variables included in the final model were all found to be factors significantly associated with report of neurotoxicity symptoms. Future research should examine the relationship between these variables and self-report of symptoms of neurotoxicity.^

Assessing how middle school students' nutrient intake varies based on the availability of a la carte offerings at lunch

Purpose: School districts in the U.S. regularly offer foods that compete with the USDA reimbursable meal, known as `a la carte' foods. These foods must adhere to state nutritional regulations; however, the implementation of these regulations often differs across districts. The purpose of this study is to compare two methods of offering a la carte foods on student's lunch intake: 1) an extensive a la carte program in which schools have a separate area for a la carte food sales, that includes non-reimbursable entrees; and 2) a moderate a la carte program, which offers the sale of a la carte foods on the same serving line with reimbursable meals. ^ Methods: Direct observation was used to assess children's lunch consumption in six schools, across two districts in Central Texas (n=373 observations). Schools were matched on socioeconomic status. Data collectors were randomly assigned to students, and recorded foods obtained, foods consumed, source of food, gender, grade, and ethnicity. Observations were entered into a nutrient database program, FIAS Millennium Edition, to obtain nutritional information. Differences in energy and nutrient intake across lunch sources and districts were assessed using ANOVA and independent t-tests. A linear regression model was applied to control for potential confounders. ^ Results: Students at schools with extensive a la carte programs consumed significantly more calories, carbohydrates, total fat, saturated fat, calcium, and sodium compared to students in schools with moderate a la carte offerings (p<.05). Students in the extensive a la carte program consumed approximately 94 calories more than students in the moderate a la carte program. There was no significant difference in the energy consumption in students who consumed any amount of a la carte compared to students who consumed none. In both districts, students who consumed a la carte offerings were more likely to consume sugar-sweetened beverages, sweets, chips, and pizza compared to students who consumed no a la carte foods. ^ Conclusion: The amount, type and method of offering a la carte foods can significantly affect student dietary intake. This pilot study indicates that when a la carte foods are more available, students consume more calories. Findings underscore the need for further investigation on how availability of a la carte foods affects children's diets. Guidelines for school a la carte offerings should be maximized to encourage the consumption of healthful foods and appropriate energy intake.^

Comparison of health behaviors of Mexican American and non -Hispanic White females: Implications for health promotion programs

Hispanics form the second-largest minority group in the United States totaling 22 million people. Health data on this population are sparse and inconsistent. This study seeks to determine use of preventative services and risk factor behaviors of Mexican American and non-Hispanic White females residing in South Texas.^ Baseline data from female respondents in household surveys in six South Texas counties (Ramirez and McAlister, 1988; McAlister et al., 1992) were analyzed to test the following hypotheses: (1) Mexican American and Non-Hispanic White females exhibit different patterns of health behaviors; (2) Mexican American females will exhibit different health behaviors regardless of age; and (3) the differences between Mexican American women and non-Hispanic White females are due to education and acculturation factors.^ Over the past decade, the traditional behaviors of Mexican American females have begun to change due to education, acculturation, and their participation in the labor force. The results from this study identify some of the changes that will require immediate attention from health care providers. Results revealed that regardless of ethnicity, age, education, and language preference, non-Hispanic White females were significantly more likely to participate in preventive screening practices than were Mexican American females. Risk factor analysis revealed a different pattern with Mexican American females significantly more likely to be non-smokers, non-alcoholic drinkers, and to have good fat avoidance practices compared to non-Hispanic White females. However, compared to those who are less-educated or Spanish-speaking, Mexican American females with higher levels of education and preference for speaking English only showed positive and negative health behaviors that were more similar to the non-Hispanic White females. The positive health behaviors that come with acculturation, e.g., more participation in preventive care and more physical activity, are welcome changes. But this study has implications for global health development and reinforces a need for "primordial" prevention strategies to deter the unwanted concomitants of economic development and acculturation. Smoking and drinking behaviors among Mexican American females need to be kept at low levels to prevent increased morbidity and premature deaths in this population. ^

Recovery of traditional mortars in the laboratory of materials at the school of architectura of Madrid

The Laboratory of Materials seminar is an optional course offered to students in the School of Architecture in Madrid. It is taught during 35 class hours in the laboratory of materials distributed in two hours and forty minutes weekly. One of the working lines is the preparation of traditional mortars made by students groups, each one of 4 or 5 members. It is basically a practical course, and students have to prepare a group of tests pieces in order to confirm the initial hypothesis, or when needed, make innovations. The test pieces are of 150mmx150mmx10mm and applied to big size hollow bricks, prismatic test pieces of 40mmx40mmx160mm to apply physical and mechanical tests and brick wallings of varied dimensions.

The introduction of teaching innovations into the traditional teaching of construction and building materials

The traditional teaching methods used for training civil engineers are currently being called into question as a result of the new knowledge and skills now required by the labor market. In addition, the European Higher Education Area is requesting that students be given a greater say in their learning. In the subject called Construction and Building Materials at the Civil Engineering School of the Universidad Politécnica de Madrid, a path was set three academic years ago to lead to an improvement in traditional teaching by introducing active methodologies. The innovations are based on cooperative learning, new technologies, and continuous assessment. The writers’ proposal is to offer their experience as a contribution to the debate on how students can be encouraged to acquire the skills currently demanded from a civil engineer, though not overlooking solid, top-quality training. From the outcomes obtained, it can be concluded that using new teaching techniques to supplement a traditional approach provides more opportunities for students to learn while boosting their motivation. In our case, the introduction of these changes has resulted in an increased pass rate of 29% on average, when such a figure is considered in the light of the mean value of passes during the last decade.

From Secondary School To University: Attracting Young Students Towards A Career In Nuclear

From its creation, Spanish Young Generation in Nuclear (Jóvenes Nucleares, JJNN), a non-profit organization that depends on the Spanish Nuclear Society (SNE), has as an important scope to help spread knowledge about nuclear energy, not only pointing out its advantages and its role in our society, but also trying to correct some of the ideas that are due to the biased information and to the lack of knowledge. To try to have success in that goal, some high school lectures were taught and it has been organized regularly a Basic Course on Nuclear Science and Technology

Motivating Young Students to Start a Career in Nuclear: The Basic Course of Science and Nuclear Technology, An Educational Activity of Spanish Young Generation in Nuclear (JÓVENES NUCLEARES)

The main objective of this course, conducted by Jóvenes Nucleares (Spanish Young Generation in Nuclear, JJNN), a non-profit organization that depends on the Spanish Nuclear Society (SNE) is to pass on basic knowledge about Science and Nuclear Technology to the general public, mostly students and introduce them to its most relevant points. The purposes of this course are to provide general information, to answer the most common questions about Nuclear Energy and to motivate the young students to start a career in nuclear. Therefore, it is directed mainly to high school and university students, but also to general people that wants to learn about the key issues of such an important matter in our society. Anybody could attend the course, as no specific scientific education is required. The course is done at least once a year, during the Annual Meeting of the Spanish Nuclear Society, which takes place in a different Spanish city each time. The course is done also to whichever university or institution that asks for it to JJNN, with the only limit of the presenter´s availability. The course is divided into the following chapters: Physical nuclear and radiation principles, Nuclear power plants, Nuclear safety, Nuclear fuel, Radioactive waste, Decommission of nuclear facilities, Future nuclear power plants, Other uses of nuclear technology, Nuclear energy, climate change and sustainable development. The course is divided into 15 minutes lessons on the above topics, imparted by young professionals, experts in the field that belongs either to the Spanish Young Generation in Nuclear, either to companies and institutions related with nuclear energy. At the end of the course, a 200 pages book with the contents of the course is handed to every member of the audience. This book is also distributed in other course editions at high schools and universities in order to promote the scientific dissemination of the Nuclear Technology. As an extra motivation, JJNN delivers a course certificate to the assistants. At the end of the last edition course, in Santiago de Compostela, the assistants were asked to provide a feedback about it. Some really interesting lessons were learned, that will be very useful to improve next editions of the course. As a general conclusion of the courses it can be said that many of the students that have assisted to the course have increased their motivation in the nuclear field, and hopefully it will help the young talents to choose the nuclear field to develop their careers

Extracting non-strict independent and-parallelism using sharing and freeness information

Logic programming systems which exploit and-parallelism among non-deterministic goals rely on notions of independence among those goals in order to ensure certain efficiency properties. "Non-strict" independence (NSI) is a more relaxed notion than the traditional notion of "strict" independence (SI) which still ensures the relevant efficiency properties and can allow considerable more parallelism than SI. However, all compilation technology developed to date has been based on SI, because of the intrinsic complexity of exploiting NSI. This is related to the fact that NSI cannot be determined "a priori" as SI. This paper filis this gap by developing a technique for compile-time detection and annotation of NSI. It also proposes algorithms for combined compiletime/ run-time detection, presenting novel run-time checks for this type of parallelism. Also, a transformation procedure to eliminate shared variables among parallel goals is presented, aimed at performing as much work as possible at compile-time. The approach is based on the knowledge of certain properties regarding the run-time instantiations of program variables —sharing and freeness— for which compile-time technology is available, with new approaches being currently proposed. Thus, the paper does not deal with the analysis itself, but rather with how the analysis results can be used to parallelize programs.

Advances in the Simultaneous Multiple Surface optical design method for imaging and non-imaging applications

Classical imaging optics has been developed over centuries in many areas, such as its paraxial imaging theory and practical design methods like multi-parametric optimization techniques. Although these imaging optical design methods can provide elegant solutions to many traditional optical problems, there are more and more new design problems, like solar concentrator, illumination system, ultra-compact camera, etc., that require maximum energy transfer efficiency, or ultra-compact optical structure. These problems do not have simple solutions from classical imaging design methods, because not only paraxial rays, but also non-paraxial rays should be well considered in the design process. Non-imaging optics is a newly developed optical discipline, which does not aim to form images, but to maximize energy transfer efficiency. One important concept developed from non-imaging optics is the “edge-ray principle”, which states that the energy flow contained in a bundle of rays will be transferred to the target, if all its edge rays are transferred to the target. Based on that concept, many CPC solar concentrators have been developed with efficiency close to the thermodynamic limit. When more than one bundle of edge-rays needs to be considered in the design, one way to obtain solutions is to use SMS method. SMS stands for Simultaneous Multiple Surface, which means several optical surfaces are constructed simultaneously. The SMS method was developed as a design method in Non-imaging optics during the 90s. The method can be considered as an extension to the Cartesian Oval calculation. In the traditional Cartesian Oval calculation, one optical surface is built to transform an input wave-front to an out-put wave-front. The SMS method however, is dedicated to solve more than 1 wave-fronts transformation problem. In the beginning, only 2 input wave-fronts and 2 output wave-fronts transformation problem was considered in the SMS design process for rotational optical systems or free-form optical systems. Usually “SMS 2D” method stands for the SMS procedure developed for rotational optical system, and “SMS 3D” method for the procedure for free-form optical system. Although the SMS method was originally employed in non-imaging optical system designs, it has been found during this thesis that with the improved capability to design more surfaces and control more input and output wave-fronts, the SMS method can also be applied to imaging system designs and possesses great advantage over traditional design methods. In this thesis, one of the main goals to achieve is to further develop the existing SMS-2D method to design with more surfaces and improve the stability of the SMS-2D and SMS-3D algorithms, so that further optimization process can be combined with SMS algorithms. The benefits of SMS plus optimization strategy over traditional optimization strategy will be explained in details for both rotational and free-form imaging optical system designs. Another main goal is to develop novel design concepts and methods suitable for challenging non-imaging applications, e.g. solar concentrator and solar tracker. This thesis comprises 9 chapters and can be grouped into two parts: the first part (chapter 2-5) contains research works in the imaging field, and the second part (chapter 6-8) contains works in the non-imaging field. In the first chapter, an introduction to basic imaging and non-imaging design concepts and theories is given. Chapter 2 presents a basic SMS-2D imaging design procedure using meridian rays. In this chapter, we will set the imaging design problem from the SMS point of view, and try to solve the problem numerically. The stability of this SMS-2D design procedure will also be discussed. The design concepts and procedures developed in this chapter lay the path for further improvement. Chapter 3 presents two improved SMS 3 surfaces’ design procedures using meridian rays (SMS-3M) and skew rays (SMS-1M2S) respectively. The major improvement has been made to the central segments selections, so that the whole SMS procedures become more stable compared to procedures described in Chapter 2. Since these two algorithms represent two types of phase space sampling, their image forming capabilities are compared in a simple objective design. Chapter 4 deals with an ultra-compact SWIR camera design with the SMS-3M method. The difficulties in this wide band camera design is how to maintain high image quality meanwhile reduce the overall system length. This interesting camera design provides a playground for the classical design method and SMS design methods. We will show designs and optical performance from both classical design method and the SMS design method. Tolerance study is also given as the end of the chapter. Chapter 5 develops a two-stage SMS-3D based optimization strategy for a 2 freeform mirrors imaging system. In the first optimization phase, the SMS-3D method is integrated into the optimization process to construct the two mirrors in an accurate way, drastically reducing the unknown parameters to only few system configuration parameters. In the second optimization phase, previous optimized mirrors are parameterized into Qbfs type polynomials and set up in code V. Code V optimization results demonstrates the effectiveness of this design strategy in this 2-mirror system design. Chapter 6 shows an etendue-squeezing condenser optics, which were prepared for the 2010 IODC illumination contest. This interesting design employs many non-imaging techniques such as the SMS method, etendue-squeezing tessellation, and groove surface design. This device has theoretical efficiency limit as high as 91.9%. Chapter 7 presents a freeform mirror-type solar concentrator with uniform irradiance on the solar cell. Traditional parabolic mirror concentrator has many drawbacks like hot-pot irradiance on the center of the cell, insufficient use of active cell area due to its rotational irradiance pattern and small acceptance angle. In order to conquer these limitations, a novel irradiance homogenization concept is developed, which lead to a free-form mirror design. Simulation results show that the free-form mirror reflector has rectangular irradiance pattern, uniform irradiance distribution and large acceptance angle, which confirm the viability of the design concept. Chapter 8 presents a novel beam-steering array optics design strategy. The goal of the design is to track large angle parallel rays by only moving optical arrays laterally, and convert it to small angle parallel output rays. The design concept is developed as an extended SMS method. Potential applications of this beam-steering device are: skylights to provide steerable natural illumination, building integrated CPV systems, and steerable LED illumination. Conclusion and future lines of work are given in Chapter 9. Resumen La óptica de formación de imagen clásica se ha ido desarrollando durante siglos, dando lugar tanto a la teoría de óptica paraxial y los métodos de diseño prácticos como a técnicas de optimización multiparamétricas. Aunque estos métodos de diseño óptico para formación de imagen puede aportar soluciones elegantes a muchos problemas convencionales, siguen apareciendo nuevos problemas de diseño óptico, concentradores solares, sistemas de iluminación, cámaras ultracompactas, etc. que requieren máxima transferencia de energía o dimensiones ultracompactas. Este tipo de problemas no se pueden resolver fácilmente con métodos clásicos de diseño porque durante el proceso de diseño no solamente se deben considerar los rayos paraxiales sino también los rayos no paraxiales. La óptica anidólica o no formadora de imagen es una disciplina que ha evolucionado en gran medida recientemente. Su objetivo no es formar imagen, es maximazar la eficiencia de transferencia de energía. Un concepto importante de la óptica anidólica son los “rayos marginales”, que se pueden utilizar para el diseño de sistemas ya que si todos los rayos marginales llegan a nuestra área del receptor, todos los rayos interiores también llegarán al receptor. Haciendo uso de este principio, se han diseñado muchos concentradores solares que funcionan cerca del límite teórico que marca la termodinámica. Cuando consideramos más de un haz de rayos marginales en nuestro diseño, una posible solución es usar el método SMS (Simultaneous Multiple Surface), el cuál diseña simultáneamente varias superficies ópticas. El SMS nació como un método de diseño para óptica anidólica durante los años 90. El método puede ser considerado como una extensión del cálculo del óvalo cartesiano. En el método del óvalo cartesiano convencional, se calcula una superficie para transformar un frente de onda entrante a otro frente de onda saliente. El método SMS permite transformar varios frentes de onda de entrada en frentes de onda de salida. Inicialmente, sólo era posible transformar dos frentes de onda con dos superficies con simetría de rotación y sin simetría de rotación, pero esta limitación ha sido superada recientemente. Nos referimos a “SMS 2D” como el método orientado a construir superficies con simetría de rotación y llamamos “SMS 3D” al método para construir superficies sin simetría de rotación o free-form. Aunque el método originalmente fue aplicado en el diseño de sistemas anidólicos, se ha observado que gracias a su capacidad para diseñar más superficies y controlar más frentes de onda de entrada y de salida, el SMS también es posible aplicarlo a sistemas de formación de imagen proporcionando una gran ventaja sobre los métodos de diseño tradicionales. Uno de los principales objetivos de la presente tesis es extender el método SMS-2D para permitir el diseño de sistemas con mayor número de superficies y mejorar la estabilidad de los algoritmos del SMS-2D y SMS-3D, haciendo posible combinar la optimización con los algoritmos. Los beneficios de combinar SMS y optimización comparado con el proceso de optimización tradicional se explican en detalle para sistemas con simetría de rotación y sin simetría de rotación. Otro objetivo importante de la tesis es el desarrollo de nuevos conceptos de diseño y nuevos métodos en el área de la concentración solar fotovoltaica. La tesis está estructurada en 9 capítulos que están agrupados en dos partes: la primera de ellas (capítulos 2-5) se centra en la óptica formadora de imagen mientras que en la segunda parte (capítulos 6-8) se presenta el trabajo del área de la óptica anidólica. El primer capítulo consta de una breve introducción de los conceptos básicos de la óptica anidólica y la óptica en formación de imagen. El capítulo 2 describe un proceso de diseño SMS-2D sencillo basado en los rayos meridianos. En este capítulo se presenta el problema de diseñar un sistema formador de imagen desde el punto de vista del SMS y se intenta obtener una solución de manera numérica. La estabilidad de este proceso se analiza con detalle. Los conceptos de diseño y los algoritmos desarrollados en este capítulo sientan la base sobre la cual se realizarán mejoras. El capítulo 3 presenta dos procedimientos para el diseño de un sistema con 3 superficies SMS, el primero basado en rayos meridianos (SMS-3M) y el segundo basado en rayos oblicuos (SMS-1M2S). La mejora más destacable recae en la selección de los segmentos centrales, que hacen más estable todo el proceso de diseño comparado con el presentado en el capítulo 2. Estos dos algoritmos representan dos tipos de muestreo del espacio de fases, su capacidad para formar imagen se compara diseñando un objetivo simple con cada uno de ellos. En el capítulo 4 se presenta un diseño ultra-compacto de una cámara SWIR diseñada usando el método SMS-3M. La dificultad del diseño de esta cámara de espectro ancho radica en mantener una alta calidad de imagen y al mismo tiempo reducir drásticamente sus dimensiones. Esta cámara es muy interesante para comparar el método de diseño clásico y el método de SMS. En este capítulo se presentan ambos diseños y se analizan sus características ópticas. En el capítulo 5 se describe la estrategia de optimización basada en el método SMS-3D. El método SMS-3D calcula las superficies ópticas de manera precisa, dejando sólo unos pocos parámetros libres para decidir la configuración del sistema. Modificando el valor de estos parámetros se genera cada vez mediante SMS-3D un sistema completo diferente. La optimización se lleva a cabo variando los mencionados parámetros y analizando el sistema generado. Los resultados muestran que esta estrategia de diseño es muy eficaz y eficiente para un sistema formado por dos espejos. En el capítulo 6 se describe un sistema de compresión de la Etendue, que fue presentado en el concurso de iluminación del IODC en 2010. Este interesante diseño hace uso de técnicas propias de la óptica anidólica, como el método SMS, el teselado de las lentes y el diseño mediante grooves. Este dispositivo tiene un límite teórica en la eficiencia del 91.9%. El capítulo 7 presenta un concentrador solar basado en un espejo free-form con irradiancia uniforme sobre la célula. Los concentradores parabólicos tienen numerosas desventajas como los puntos calientes en la zona central de la célula, uso no eficiente del área de la célula al ser ésta cuadrada y además tienen ángulos de aceptancia de reducido. Para poder superar estas limitaciones se propone un novedoso concepto de homogeneización de la irrandancia que se materializa en un diseño con espejo free-form. El análisis mediante simulación demuestra que la irradiancia es homogénea en una región rectangular y con mayor ángulo de aceptancia, lo que confirma la viabilidad del concepto de diseño. En el capítulo 8 se presenta un novedoso concepto para el diseño de sistemas afocales dinámicos. El objetivo del diseño es realizar un sistema cuyo haz de rayos de entrada pueda llegar con ángulos entre ±45º mientras que el haz de rayos a la salida sea siempre perpendicular al sistema, variando únicamente la posición de los elementos ópticos lateralmente. Las aplicaciones potenciales de este dispositivo son varias: tragaluces que proporcionan iluminación natural, sistemas de concentración fotovoltaica integrados en los edificios o iluminación direccionable con LEDs. Finalmente, el último capítulo contiene las conclusiones y las líneas de investigación futura.

Towards extracting non-strict independent and-parallelism using sharing and freeness information

Logic programming systems which exploit and-parallelism among non-deterministic goals rely on notions of independence among those goals in order to ensure certain efficiency properties. "Non-strict" independence (NSI) is a more relaxed notion than the traditional notion of "strict" independence (SI) which still ensures the relevant efficiency properties and can allow considerable more parallelism than SI. However, all compilation technology developed to date has been based on SI, presumably because of the intrinsic complexity of exploiting NSI. This is related to the fact that NSI cannot be determined "a priori" as SI. This paper fills this gap by developing a technique for compile-time detection and annotation of NSI. It also proposes algorithms for combined compile- time/run-time detection, presenting novel run-time checks for this type of parallelism. Also, a transformation procedure to eliminate shared variables among parallel goals is presented, attempting to perform as much work as possible at compiletime. The approach is based on the knowledge of certain properties about run-time instantiations of program variables —sharing and freeness— for which compile-time technology is available, with new approaches being currently proposed.