An overview of fisheries conflicts in South and Southeast Asia: Recommendations, challenges and directions

Fisheries conflicts are among the persistent problems affecting the security of food, livelihoods and fishing environments crucial to poor fishing communities in developing countries in South and Southeast Asia. Most conflicts arise from excessive fishing efforts due to increasing population and economic motivations. Conflicts are not all undesirable as some disputes become a catalyst for much needed reforms for policy and economic improvements. However, a framework for analyzing conflicts in fisheries is necessary to organize interventions relevant to the nature of conflicts, and the needs and capacities of fisheries stakeholders in the region. The WorldFish Center, together with research partners, conducted studies that identify a framework for managing fisheries conflicts. Thematic policy recommendations for managing fishing capacity and related conflicts in small-scale fisheries in the region are identified for further consideration by fisheries stakeholders.

Fish farming: the smallholder information needs in Kenya

The article outlines the information needs of small scale fish farmers in Kenya.

Fish demand and supply projections

It has been predicted that the global demand for fish for human consumption will increase by more than 50% over the next 15 years. The FAO has projected that the increase in supply will originate primarily from marine fisheries, aquaculture and to a lesser extent from inland fisheries, but with a commensurate price increase. However, there are constraints to increased production in both marine and inland fisheries, such as overfishing, overexploitation limited potential increase and environmental degradation due to industrialization. The author sees aquaculture as having the greatest potential for future expansion. Aquaculture practices vary depending on culture, environment, society amd sources of fish. Inputs are generally low-cost, ecologically efficient and the majority of aquaculture ventures are small-scale and family operated. In the future, advances in technology, genetic improvement of cultured species, improvement in nutrition, disease management, reproduction control and environmental management are expected along with opportunities for complimentary activities with agriculture, industrial and wastewater linkages. The main constraints to aquaculture are from reduced access to suitable land and good quality water due to pollution and habitat degradation. Aquaculture itself carries minimal potential for aquatic pollution. State participation in fisheries production has not proven to be the best way to promote the fisheries sector. The role of governments is increasingly seen as creating an environment for economic sectors to make an optimum contribution, through support in areas such as infrastructure, research, training and extension and a legal framework. The author feels that a holistic approach integrating the natural and social sciences is called for when fisheries policy is being examined.

Community-based coastal resource management in Orion (Bataan, Philippines) : building community property rights in a fishing community

The Community-based Coastal Resource Management Project in Orion, Bataan, Philippines was started in 1991. The village level fishers organizations have formed a municipal-wide association called the Samahan at Ugnayan ng Pangisdaan sa Orion (SUGPO). It represents 70% of the small-scale fishers in Orion and has taken on the task of rehabilitating the degraded fishing grounds. The experience in Orion indicates that coastal resource management can be successful if the fishers have ownership of the program and the costs and benefits of the program are distributed equally in a manner acceptable to them.

Simple method for backyard production of snakehead (Channa striata Bloch) fry

The snakehead (Channa striata ) is a common freshwater fish species in Malaysia. Details are given of a simple technique for breeding this species, suitable for small-scale farmers practising backyard aquaculture. Two techniques were used to induce spawning - the first used water level manipulation to simulate rain and the second used injected with human chorionic gonadotropic hormone. The former, more natural, spawning technique was found to provide a viable alternative for the small-scale farmer, being much simpler than hormone injection.

Socioeconomic characteristics of payang seine (lampara) and driftnet fisheries in West Sumatra, Indonesia

A proportionate random sample survey of 10 percent of the driftnet and Payang seine fishers in West Sumatra was carried out in 1998. A total of 45 driftnet and 66 lampara fishers were interviewed to obtain socioeconomic data on the fisheries. About 40 percent of the driftnet and 76 percent of the lampara fishers owned and operated their fishing vessels and gears indicating a high level of ownership of fishing assets by these small scale fishers. The lampara catches consisted mainly of eastern little tuna, skipjack tuna, yellow fin tuna and mackerel, while the driftnets caught mainly Spanish mackerel, Indian mackerel, eastern little tuna and scad.

An assessment of scup (Stenotomus chrysops) and black sea bass (Centropristas striata) discards in the directed otter trawl fisheries in the Mid-Atlantic Bight

This study was undertaken to re-assess the level of scup (Stenotomus chrysops) discards by weight and to evaluate the effect of various codend mesh sizes on the level of scup discards in the winter-trawl scup fishery. Scup discards were high in directed scup tows regardless of codend mesh — typically one to five times the weight of landings. The weight of scup discards in the present study did not differ significantly from that recorded in scup-targeted tows in the NMFS observer database. Most discards were required as such by the 22.86 cm TL (total length) fish-size limit for catches. Mesh sizes ≤12.7 cm, including the current legal mesh size (11.43 cm) did not adequately filter out scup smaller than 22.86 cm. The median length of scup discards was about 19.83 cm TL. Lowering the legal size for scup from 22.86 to 19.83 cm TL would greatly reduce discard mortality. Scup discards were a small fraction (0.4%) of black sea bass (Centropristis striata) landings in blacksea-bass−targeted tows. The black sea bass fishery is currently regulated under the small-mesh fishery gearrestricted area plan in which fishing is prohibited in some areas to reduce scup mortality. Our study found no evidence to support the efficacy of this management approach. The expectations that discarding would increase disproportionately as the trip limit (limit [in kilograms] on catch for a species) was reached towards the end of the trip and that discards would increase when the trip limit was reduced from 4536 kg to 454 kg at the end of the directed fishing season were not supported. Trip limits did not significantly affect discard mortality.

The Bay Scallop, Argopecten irradians, in Florida Coastal Waters

The bay scallop, Argopecten irradians, supported a small commercial fishery in Florida from the late 1920’s through the 1940’s; peak landings were in 1946 (214,366 lbs of meats), but it currently supports one of the most popular and family-oriented fisheries along the west coast of Florida. The primary habitat of the short-lived (18 months) bay scallop is seagrass beds. Peak spawning occurs in the fall. Human population growth and coastal development that caused habitat changes and reduced water quality probably are the main causes of a large decline in the scallop’s abundance. Bay scallop restoration efforts in bays where they have become scarce have centered on releasing pediveligers and juveniles into grass beds and holding scallops in cages where they would

Contribuição ao estudo do efeito tridimensional de instalação e de grupo em estacas cravadas em areia.

O efeito de instalação de estacas cravadas em areia, que promove um aumento da compacidade do solo e de seus parâmetros de resistência e deformabilidade, é analisado nesta dissertação em conjunto com o efeito de grupo. O procedimento estabelecido objetiva quantificar a melhoria após a instalação de um grupo de estacas e foi desenvolvido nesta pesquisa a partir da contribuição de Alves (1998). Para a utilização deste procedimento, foram propostas correlações do módulo de Young do solo em função da resistência à penetração NSPT (ou da resistência à penetração normalizada N60), a partir de um banco de dados obtido da literatura, visando não apenas as aplicações implementadas neste estudo, como também nortear futuras aplicações práticas. Na análise de casos documentados da literatura, foi utilizado o programa Plaxis 3D Foundation. Inicialmente foi procedida a calibração do programa através da reprodução de um caso de instrumentação de um grupo de estacas na argila rija de Londres, muito bem documentado por Cooke et al. (1980). Os resultados das simulações, com parâmetros do solo obtidos da literatura, se ajustaram muito bem aos resultados experimentais, seja nos valores de recalque, seja nos diagramas de transferência de carga. Posteriormente, a melhoria do solo por efeito da instalação foi estimada, através do procedimento estabelecido nesta dissertação, baseado em Alves (1998), a partir das características iniciais do solo antes da instalação de um grupo de estacas em modelo reduzido em solo arenoso. Obtidos os parâmetros melhorados previstos para o solo após a instalação, estes foram aplicados a um grupo de 9 estacas, para diferentes espaçamentos relativos, como dados de entrada no programa Plaxis. A comparação dos resultados experimentais com aqueles simulados numericamente sinaliza para o potencial tanto do programa Plaxis, na reprodução do comportamento do conjunto, como do modelo de Alves (1998), que norteou o procedimento proposto nesta pesquisa. O fator de escala, ressaltado na dissertação, bem como outros aspectos relevantes observados nas análises realizadas, são propostos como temas futuros a serem investigados na continuidade desta linha de pesquisa.

The History of Oyster Farming in Australia

Aboriginal Australians consumed oysters before settlement by Europeans as shown by the large number of kitchen middens along Australia's coast. Flat oysters, Ostrea angasi, were consumed in southeastern Australia, whereas both flat and Sydney rock oysters, Saccostrea glomerata, are found in kitchen middens in southern New South Wales (NSW), but only Sydney rock oysters are found in northern NSW and southern Queensland. Oyster fisheries began with the exploitation of dredge beds, for the use of oyster shell for lime production and oyster meat for consumption. These natural oyster beds were nealy all exhausted by the late 1800's, and they have not recovered. Oyster farming, one of the oldest aquaculture industries in Australia, began as the oyster fisheries declined in the late 1800's. Early attempts at farming flat oysters in Tasmania, Victoria, and South Australia, which started in the 1880's, were abandoned in the 1890's. However, a thriving Sydney rock oyster industry developed from primitive beginnings in NSW in the 1870's. Sydney rock oysters are farmed in NSW, southern Queensland, and at Albany, Western Australia (WA). Pacific oysters, Crassostrea gigas, are produced in Tasmania, South Australia, and Port Stephens, NSW. FLant oysters currently are farmed only in NSW, and there is also some small-scale harvesting of tropical species, the coarl rock or milky oyster, S. cucullata, and th black-lip oyster, Striostrea mytiloides, in northern Queensland. Despite intra- and interstate rivalries, oyster farmers are gradually realizing that they are all part of one industry, and this is reflected by the establishment of the national Australian Shellfish Quality Assuarance Program and the transfer of farming technology between states. Australia's oyster harvests have remained relatively stable since Sydney rock oyster production peaked in the mid 1970's at 13 million dozen. By the end of the 1990's this had stabilized at around 8 million dozen, and Pacific oyster production reached a total of 6.5 million dozen from Tasmania, South Australia, and Port Stephens, a total of 14.5 million dozen oysters for the whole country. This small increase in production during a time of substantial human population growth shows a smaller per capita consumption and a declining use of oysters as a "side-dish."

Historical Exploitation of the California Sea Lion, Zalophus californianus, in México

The exploitation of California sea lions, Zalophus californianus, in Mexican waters can be divided into four periods as defined by political characteristics of the country: Prehispanic, Colonial, Independent, and Postrevolutionary. During the first period (pre 1533), Native Americans took sea lions at low levels. During the second (1534–1821) and the third (1822–1911) periods, most exploitation was by foreigners and was incidental to other marine mammal harvests. During the Postrevolutionary period (after 1911), sea lions were exploited by Mexican and U.S. citizens for several commercial uses. Exploitation officially ended in 1982, although some small-scale poaching still occurs.

Biology and Management of Deepwater Snappers of the Hawaiian Archipelago

Commercial and recreational deepwater (100-400 m) bottom-fishing in Hawaii targets a multispecies group of lutjanid snappers. Relatively little is known about the life history of these species. Research in Hawaii and elsewhere in the tropical Pacific suggests that most of the species are slow growing, long lived, and have a relatively high age at sexual maturity. Stock assessment is difficult because of the multispecies nature of the fishery. However, recent analysis of commercial fishery data indicates that some of the species may currently be overexploited. Research is underway to determine the efficacy of management measures such as minimum-size limit changes or seasonal and spatial fishery closures to maintain optimal spawning biomass.

Remote Camera and Trapping Survey of the Deep-water Shrimps Heterocarpus laevigatus and H. ensifer and the Geryonid Crab Chaceon granulatus in Palau

Time-lapse remote photo-sequences at 73-700 m depth off Palau, Western Caroline Islands, show that the caridean shrimp Heterocarpus laevigatus tends to be a solitary animal, occurring below ~350 m, that gradually accumulates around bait sites over a prolonged period. A smaller speies, H. ensifer, tends to move erratically in swarms, appearing in large numbers in the upper part of its range (<250 m) during the evening crepuscular period and disappearing at dawn. Trapping and photsequence data indicate the depth range of H. ensifer (during daylight) is ~250-550 M, while H. laevigatus ranges from 350 m to at least 800 m, along with the geryonid crab Chaceon granulatus. Combined trapping for Heterocarpus laevigatus and Chaceon granulatus, using a three-chamber box-trap and extended soak times (48-72 hr), may be an appropriate technique for small-scale deep-water fisheries along forereef slopes of Indo-Pacific archipelagoes.

Distribution and Apparent Abundance of the Basking Shark, Cetorhinus maximus, off the Central and Southern California Coast, 1962-85

Basking sharks, Cetorhinus maximus, are frequently observed along the central and northwestern southern California coast during the winter and spring months. These large plankton feeding elasmobranchs, second in size only to the whale shark, Rhineodon typus, had been the subject of a small commercial fishery off California in the late 1940's and early 1950's for their liver oil, rich in vitamin A, and in later years for reduction into fish meal and oil (Roedel and Ripley, 1950). These fisheries were sporadic and did not take basking sharks in large numbers.

Quantificação de metais e arsênio em aerossóis grossos, finos, ultrafinos e nanoparticulados por ICP-OES em ar ambiente e emissões veiculares de motores operando com diesel/biodiesel

Na frota automotiva nacional, veículos movidos a diesel e biodiesel são utilizados em larga e pequena escala, respectivamente, fazendo com que haja uma preocupação com os gases da exaustão provenientes destes motores. Ao ser fabricado, o veículo passa por testes rigorosos das emissões gasosas, segundo as regras do PROCONVE. Porém, estes testes regulam apenas as substâncias químicas contidas na legislação vigente, cujos riscos à saúde humana e ao meio ambiente são conhecidos. Portanto, conhecer o maior número de componentes ainda não contemplados pela legislação, em especial metais no material particulado, é de suma importância para subsidiar futuras alterações e inclusões na lista de componentes regulados. De acordo com o tamanho das partículas do material particulado, podendo chegar a escalas nanométricas, a inalação deste material pode causar lesões graves no organismo, pois têm a capacidade de atingir órgãos internos. O estudo é baseado na amostragem do material particulado proveniente dos gases de motores alimentados com diesel e/ou biodiesel em diferentes proporções de combustível e ar ambiente com impactador em cascata; determinando metais e arsênio na atmosfera de diferentes localidades do estado do Rio de Janeiro e no material particulado dos gases de escape de motores de ônibus/caminhão (EURO III), por intermédio de abertura ácida do material coletado e da técnica analítica ICP-OES. Os resultados obtidos para motor EURO III variaram de 100 a 10000 ng m-3, com a redução de emissão conforme adição de biodiesel no diesel sendo comprovada. Porém, em todas as proporções de combustíveis empregadas, houve grande incidência de emissão de partículas em escala manométrica, sendo esse comportamento também observado nas amostragens em ar ambiente. Neste caso, teores de 1,0 a 45,0 ng m-3 evidenciaram Caxias e Madureira como locais mais poluídos dos amostrados. Ni é o metal que possui situação mais alarmante, pois em todos os tamanhos de partícula e locais amostrados, os teores deste elemento foram superiores ao permitido pela legislação internacional. A análise estatística multivariada propôs que os combustíveis B10 e B15 são quimicamente semelhantes, enquanto B5 e B20 sofrem fortes alterações no decorrer de sua combustão e a correlação de Pearson mostrou em ar ambiente, que locais com níveis próximos de poluição apresentaram similaridade nos resultados, a qualidade do ar de Madureira é afetado predominantemente pela construção civil e tráfego, a presença da Baía de Guanabara ao redor da Cidade Universitária influencia nas emissões, a refinaria em Caxias é responsável por emissões importantes de metais e no Parque Nacional de Itatiaia , ao contrário de que se supunha, não está totalmente livre de poluição