Teor mineral e capacidade antioxidante em chás e infusões

Mestrado em Engenharia Química – Ramo Optimização Energética na Indústria Química

Modelação estocástica do depósito mineral do Zambujal (Mina de Neves-Corvo): contribuição da densidade como indicador morfológico

Este estudo tem como objetivo construir um modelo estocástico de alta resolução da morfologia e dos teores em metal, do depósito mineral do Zambujal, Mina de Neves-Corvo. O depósito do Zambujal é um corpo vulcanogénico que se localiza no setor Português, na parte mais a Sul da Faixa Piritosa Ibérica, com sulfuretos maciços no topo e fissurais na base. Para construir um modelo estocástico deste depósito, onde os teores em metal evidenciam zonamento, é importante ter em conta a proporção local de sulfuretos na matriz rochosa. Como esta variável não é quantificada em laboratório, propõe-se a utilização da densidade das amostras como um indicador indireto da proporção de minérios na matriz rochosa. Conhecida esta variável, a modelação dos teores em metal pode ser feita para os chamados teores relativos (teores em metal na fração de sulfuretos). As principais etapas da metodologia proposta são: (a) para cada amostra analisada no laboratório, estimação de soluções para a variável proporção de sulfuretos na matriz rochosa ????(????), tendo em conta a paragénese principal do depósito, os teores e a densidade da rocha; (b) construção de um modelo morfológico 3D de baixa resolução com duas regiões, minérios maciços e minérios fissurais, por digitalização de limites em perfis, interpolação de superfícies e conversão para o modelo de blocos do depósito; (c) construção de um modelo morfológico 3D de alta resolução para todo o depósito da variável ????(????) por Simulação Sequencial Direta (SSD), tendo como informação condicionante os histogramas regionais de ????(????) para minérios maciços e minérios fissurais e as soluções obtidas em (a) para ????(????) na localização das sondagens; (d) SSD dos teores relativos em cobre, zinco e prata; (e) discussão dos resultados e quantificação de recursos. Os resultados foram validados por comparação com os equivalentes obtidos numa estimação por krigagem normal dos teores em metal e mostraram ser da mesma ordem de grandeza. O conjunto de imagens simuladas das variáveis ????(????) e teores permite quantificar a incerteza do conhecimento do depósito relativamente à informação disponível.

The micromorphology of Paleoseismic soft sediment deformation structures in glacial deposits from three sample sites in Scotland /

The nature of this research is to investigate paleoseismic deformation of glacial soft sediments from three sampling sites throughout the Scottish Highlands; Arrat's Mills, Meikleour and Glen Roy. The paleoseismic evidence investigated in this research will provide a basis for applying criteria to soft sediment deformation structures, and the trigger mechanisms that create these structures. Micromorphology is the tool used in this to investigate paleoseismic deformation structures in thin section. Thin section analysis, (micromorphology) of glacial sediments from the three sampling sites is used to determine microscale evidence of past earthquakes that can be correlated to modem-day events and possibly lead to a better understanding of the impact of earthquakes throughout a range of sediment types. The significance of the three sampling locations is their proximity to two major active fault zones that cross Scotland. The fault zones are the Highland Boundary Fault and the Great Glen Fault, these two major faults that parallel each other and divide the country in half Sims (1975) used a set of seven criteria that identified soft sediment deformation structures created by a magnitude six earthquake in Cahfomia. Using criteria set forth by Sims (1975), the paleoseismic evidence can be correlated to the magnitude of the deformation structures found in the glacial sediments. This research determined that the microstructures at Arrat's Mill, Meikleour and Glen Roy are consistent with a seismically induced origin. It has also been demonstrated that, even without the presence of macrostructures, the use of micromorphology techniques in detecting such activity within sediments is of immense value.

Structural analysis of interior layered deposits in north and south Coprates Chasma, Mars

Interior layered deposits within an embayment in the northern as well as near the southern wall of Coprates Chasma in the Valles Marineris, Mars are studied using HRSC, CTX, HiRISE and CRISM data. In the northern embayment, layered deposits outcrop in three separate locations (a western deposit, a central deposit and an eastern deposit). The central layered deposit in the north has a stratigraphic thickness of 2 km. The western layered deposit abuts against the chasma wall appearing to have a relatively un-eroded depositional surface. The eastern deposit is near a landslide scar which appears to have exposed basement layering showing downward displacement. This northern embayment is suggested to have been an ancestral basin. The triangular edged deposit near the southern wall of Coprates Chasma has an elongated mound protruding from the central edge and is suggested to be the outer limits of a fault block which is back rotated 6° south. The rotation may be the result of the Valles Marineris opening.

Spectral Reflectance Characteristics of Kimberlite Indicator Minerals and Other Selected Mineral Grains

High chromium content in kimberlite indicator minerals such as pyrope garnet and diopside is often correlated with the presence of diamonds. In this study, kimberlite indicator minerals were examined using visible light reflectance spectroscopy to determine if chromium content can be correlated with spectral absorption features. The depth of absorption features in the visible spectral region were correlated with the molecular percentage of chromium and other first series transition metal elements obtained by electron microprobe data. In the visible part of the spectrum, chromium is evident by 3 absorption features in the pyrope reflectance spectrum; one isolated and narrow feature at the wavelength 689 nm was used to correlate with the chromium mol %. The isolation of this feature in the pyrope spectra is advantageous since it is not directly affected by other proximal absorption bands that could be caused by other transition metals. Analysis of the feature indicates that as grain volume increases the depth of the absorption feature will also increase. Clustering grain volumes into fractions yields better correlation between absorption depth and mol % chromium. Other types of garnet (almandine, grossular, spessartine) and kimberlite indicator minerals (olivine, diopside, chromite, ilmenite) were analyzed to determine if other absorption features could be used to predict the proportion of specific transition metal elements. Diopside in particular illustrates the same isolated chromium absorption feature as pyrope and may indicate mol percent but needs further study with larger sample sets.

Hyperspectral Mineral Identification using SVM and SOM

Remote sensing techniques involving hyperspectral imagery have applications in a number of sciences that study some aspects of the surface of the planet. The analysis of hyperspectral images is complex because of the large amount of information involved and the noise within that data. Investigating images with regard to identify minerals, rocks, vegetation and other materials is an application of hyperspectral remote sensing in the earth sciences. This thesis evaluates the performance of two classification and clustering techniques on hyperspectral images for mineral identification. Support Vector Machines (SVM) and Self-Organizing Maps (SOM) are applied as classification and clustering techniques, respectively. Principal Component Analysis (PCA) is used to prepare the data to be analyzed. The purpose of using PCA is to reduce the amount of data that needs to be processed by identifying the most important components within the data. A well-studied dataset from Cuprite, Nevada and a dataset of more complex data from Baffin Island were used to assess the performance of these techniques. The main goal of this research study is to evaluate the advantage of training a classifier based on a small amount of data compared to an unsupervised method. Determining the effect of feature extraction on the accuracy of the clustering and classification method is another goal of this research. This thesis concludes that using PCA increases the learning accuracy, and especially so in classification. SVM classifies Cuprite data with a high precision and the SOM challenges SVM on datasets with high level of noise (like Baffin Island).

Rooibos tea flavonoids increase mineral content in human osteoblast-like cells

Some cross-sectional and prospective studies have demonstrated a positive correlation between habitual tea consumption and bone mineral density in post-menopausal women. Rooibos tea contains no caffeine and is a rich source of flavonoids such as rutin, orientin, hyperoside and luteolin. These flavonoids have similar structures to estradiol, and therefore may act as estrogen mimics to promote favourable outcomes in bone. The overall objective of this research was to identify flavonoids that could enhance mineral content in human osteoblast Saos2 cells. Mineral was quantified by alizarin red staining and characterized by quantifying alkaline phosphatase (ALP) activity, cell mitochondria activity and toxicity, in addition to changes in regulatory markers of osteoblastic activity. Rutin (≥50μM), hyperoside (≥5.0μM), orientin (0.1μM-1.0μM, 15μM-100μM) and luteolin (5.0μM) enhanced mineral content. This was in part due to elevated ALP and mitochondrial activity, and lower toxicity, pro-inflammatory cytokines, and Wnt inhibitors.

The effect of 17-B estradiol therapy on bone mineral density and structure of alveolar bone in the ovariectomized rat model of postmenopausal osteoporosis

The ovariectomized (OVX) rat, a preclinical model for studying postmenopausal bone loss, may also be used to study differences in alveolar bone (AB). The objectives of this study were to quantify the differences in AB following estrogen replacement therapy (ERT), and to investigate the relationship between AB structure and density, and trabecular bone at the femoral neck (FN) and third lumbar vertebral body (LB3). Estrogen treated rats had a higher bone volume fraction (BV/TV) at the AB region (9.8% P < 0.0001), FN (12% P < 0.0001), and LB3 (11.5% P < 0.0001) compared to the OVX group. BV/TV of the AB was positively correlated with the BV/TV at the FN (r = 0.69 P < 0.0001) and the LB3 (r = 0.75 P < 0.0001). The trabecular number (Tb.N), trabecular separation (Tb.Sp), and structure model index (SMI) were also positively correlated (P < 0.05) between the AB and FN (r = 0.42, 0.49, and 0.73, respectfully) and between the AB and LB3 (r = 0.44, 0.63, and 0.69, respectfully). Given the capacity of AB to respond to ERT, future preclinical drug/nutritional intervention studies aimed at improving skeletal health should include the AB as a region of interest (ROI).

Alelos del gen del receptor de la vitamina D y su relación con la densidad mineral osea.

Tesis (Maestría en Ciencias con Especialidad en Biología Molecular e Ingeniería Genética) UANL

Estudio comparativo de reducción carbotérmica de mineral de hierro utilizando microondas [por] María Idalia del Consuelo Gómez de la Fuente

Tesis (Maestría en Ciencias de la Ingeniería Mecánica con Especialidad en Materiales) U.A.N.L.

Determinación de trazas de elementos en mineral de tungsteno por el metodo de analis por activacion de neutrones

Tesis (Maestria en Ciencias con especialidad de Ingenieria nuclear) U.A.N.L

Sistema productivo del carbón mineral y sus residuos

Tesis (Maestro en Ciencias de la Administración con Especialidad en Sistemas) UANL, 1999.

Asociación de la densidad mineral ósea con el polimorfismo taql del gen del receptor de la vitamina D y el consumo de cafeína en mujeres jóvenes.

Tesis (Maestría en Ciencias en Nutrición) UANL, 2011.