Automatic layout generation of static CMOS circuits targeting delay and power

The evolution of integrated circuits technologies demands the development of new CAD tools. The traditional development of digital circuits at physical level is based in library of cells. These libraries of cells offer certain predictability of the electrical behavior of the design due to the previous characterization of the cells. Besides, different versions of each cell are required in such a way that delay and power consumption characteristics are taken into account, increasing the number of cells in a library. The automatic full custom layout generation is an alternative each time more important to cell based generation approaches. This strategy implements transistors and connections according patterns defined by algorithms. So, it is possible to implement any logic function avoiding the limitations of the library of cells. Tools of analysis and estimate must offer the predictability in automatic full custom layouts. These tools must be able to work with layout estimates and to generate information related to delay, power consumption and area occupation. This work includes the research of new methods of physical synthesis and the implementation of an automatic layout generation in which the cells are generated at the moment of the layout synthesis. The research investigates different strategies of elements disposition (transistors, contacts and connections) in a layout and their effects in the area occupation and circuit delay. The presented layout strategy applies delay optimization by the integration with a gate sizing technique. This is performed in such a way the folding method allows individual discrete sizing to transistors. The main characteristics of the proposed strategy are: power supply lines between rows, over the layout routing (channel routing is not used), circuit routing performed before layout generation and layout generation targeting delay reduction by the application of the sizing technique. The possibility to implement any logic function, without restrictions imposed by a library of cells, allows the circuit synthesis with optimization in the number of the transistors. This reduction in the number of transistors decreases the delay and power consumption, mainly the static power consumption in submicrometer circuits. Comparisons between the proposed strategy and other well-known methods are presented in such a way the proposed method is validated.

Unit roots and the welfare gains of cycle smoothing

li consumption is log-Normal and is decomposed into a linear deterministic trend and a stationary cycle, a surprising result in business-cycle research is that the welfare gains of eliminating uncertainty are relatively small. A possible problem with such calculations is the dichotomy between the trend and the cyclical components of consumption. In this paper, we abandon this dichotomy in two ways. First, we decompose consumption into a deterministic trend, a stochastic trend, and a stationary cyclical component, calculating the welfare gains of cycle smoothing. Calculations are carried forward only after a careful discussion of the limitations of macroeconomic policy. Second, still under the stochastic-trend model, we incorporate a variable slope for consumption depending negatively on the overall volatility in the economy. Results are obtained for a variety of preference parameterizations, parameter values, and different macroeconomic-policy goals. They show that, once the dichotomy in the decomposition in consumption is abandoned, the welfare gains of cycle smoothing may be substantial, especially due to the volatility effect.

Rational expectations and the service of public debt: a recursive approach

This paper uses dynamic programming to study the time consistency of optimal macroeconomic policy in economies with recurring public deficits. To this end, a general equilibrium recursive model introduced in Chang (1998) is extended to include govemment bonds and production. The original mode! presents a Sidrauski economy with money and transfers only, implying that the need for govemment fmancing through the inflation tax is minimal. The extended model introduces govemment expenditures and a deficit-financing scheme, analyzing the SargentWallace (1981) problem: recurring deficits may lead the govemment to default on part of its public debt through inflation. The methodology allows for the computation of the set of alI sustainable stabilization plans even when the govemment cannot pre-commit to an optimal inflation path. This is done through value function iterations, which can be done on a computeI. The parameters of the extended model are calibrated with Brazilian data, using as case study three Brazilian stabilization attempts: the Cruzado (1986), Collor (1990) and the Real (1994) plans. The calibration of the parameters of the extended model is straightforward, but its numerical solution proves unfeasible due to a dimensionality problem in the algorithm arising from limitations of available computer technology. However, a numerical solution using the original algorithm and some calibrated parameters is obtained. Results indicate that in the absence of govemment bonds or production only the Real Plan is sustainable in the long run. The numerical solution of the extended algorithm is left for future research.

Franchisor-franchisee relationship and performance: influence of personality traits, entrepreneurial drive, and time of relationship

A literatura em franchising tem virtualmente ignorado o papel de aspectos psicologicos nos resultados interorganizacionais das empresas, a despeito de sua influencia nos resultados das organizações e da qualidade de relacionamento. Este estudo, portanto, tem por objetivo analisar a influência da personalidade e do potencial empreendedor na qualidade de relacionamento e desempenho financeiro na relação franqueador-franqueado, ao longo do tempo, sob a perspectiva dos franqueados. Este estudo analisa também o papel do tempo de relacionamento sobre a qualidade de relacionamento e o desempenho financeiro. Foi utilizado neste estudo um questionário de auto-preenchimento, enviado por e-mail, com o objetivo de recolher dados de uma amostra de 342 franqueados de 3 redes de franquias. A personalidade foi mensurada por meio dos “Cinco Grandes” traços de personalidade (escalas IPIP-B5): extroversão, agradabilidade, consciencia, estabilidade emocional e imaginação. O potencial empreendedor foi mensurado por meio do índice CEI (Carland Entrepreneurship Index). A qualidade do relacionamento foi estruturada como um constructo de segunda ordem, composto por 23 itens (incorporando confiança, comprometimento e satisfação com o relacionamento), e o desempenho financeiro foi representado por meio de uma escala de mensuração de crescimento de vendas e de rentabilidade. O tempo de relacionamento foi medido por meio dos meses de relacionamento entre franqueado e franqueador. As hipoteses foram testadas por meio de modelagem por equações estruturais, com a utilização do método de mínimos quadrados parciais (PLS), análise de regressão e análise de médias. Três das cinco dimensões da personalidade apresentaram o efeito previsto sobre as variáveis qualidade do relacionamento – agradabilidade (positivamente), estabilidade emocional (positivamente), e imaginação (positivamente). O desempenho financeiro foi influenciado, como previsto por consciência (positivamente), estabilidade emocional (positivamente), e imaginação (positivamente). Como esperado, a qualidade do relacionamento apresentou efeito positivo e significativo em relação ao desempenho financeiro. O potencial empreendedor apresentou o efeito positivo previsto apenas sobre desempenho. O tempo de relacionamento teve o efeito positivo esperado sobre o relacionamento franqueador-franqueado, em relação à qualidade do relacionamento e o desempenho financeiro, mas as diferenças entre as fases de relacionamento propostas foram apenas parcialmente confirmadas, uma vez que em somente duas fases (rotina e estabilização) a análise de médias mostrou diferenças significativas. Os resultados indicam que a personalidade influencia a qualidade de relacionamento e o desempenho, mas a meneira pela qual isso ocorre é diferente no contexto brasileiro, onde esta pesquisa foi realizada, dos achados da pesquisa conduzida na Austrália, sugerindo que fatores como cultura e estabilidade de mercado podem ter influencia sobre a relação entre traços de personalidade e qualidade de relacionamento, e traços de personalidade e desempenho financeiro. O potencial empreendedor parece influenciar positivamente o desempenho do franqueado, mas a sua influência não foi significativa em relação à qualidade do relacionamento. Os resultados também indicam a importância do tempo no desenvolvimento da qualidade de relacionamento e desempenho. Além disso, os relacionamentos de longo prazo estão relacionados a melhores avaliações de qualidade de relacionamento e desempenho financeiros por parte dos franqueados. As limitações do trabalho e sugestões para estudos futuros também são discutidos.

The influence of macroeconomic factors on primary issues in the Brazilian market

This research analyses the influence of the macroeconomic factors on the primary issue of stocks and debentures in the Brazilian market. Previous studies have agreed on the importance of aspects of the economic situation on a company’s capital structure, but have not established a relationship between the macroeconomic variables and the level of aggregate debt; we can mention Procianoy and Caselani (1997) and Terra (2003) as examples of this. According to Leal (2000), the limitations of the Brazilian capital market suggest that management takes advantage of moments of euphoria in the market - whether caused by a reduction in the rate of interest or by the return being offered by the equity market - to raise funds at rates that are more advantageous to the company. This characterizes the first evidence we have of opportunistic behavior influencing a company’s financing decisions. Eid Jr. (1996) provides us with the first evidence of this opportunistic behavior in his research in which 47% of those interviewed said that they chose fund sources that are economically more advantageous.

Knowledge of the patients regarding leprosy and adherence to treatment

Leprosy is a chronic infectious disease caused by Mycobacterium leprae. It is known for its great disfiguring capacity and is considered an extremely serious disease to public health worldwide. The state of Ceará ranks 13th in number of cases of leprosy in Brazil, and fourth in Northeastern region, with an average of 2,149 new cases diagnosed every year. This study aimed to evaluate the knowledge of leprosy patients regarding treatment, and to assess the level of treatment adherence and its possible barriers. The study was conducted in the reference center for dermatology, from September 2010 to October 2010, in Fortaleza, Ceará. The study data were collected by means of a structured interview, along with the Morisky-Green test, in order to assess treatment adherence and barriers to adherence. A total of 70 patients were interviewed, out of whom 66 were new cases. The majority of patients were between 42 and 50 years old, and 37 (52.9%) were male. Most patients were clinically classified as presentingmultibacillary leprosy (80%), and 78.6% of them were from Fortaleza, Brazil. The Morisky-Green test indicated that 62.9% of patients presented a low level of adherence (p < 0.005), despite claiming to aware of the disease risks. However, it was observed that 57.1% of the patients had no difficulty adhering to treatment, while 38.6% reported little difficulty. This study shows that despite the patients claiming to be familiar with leprosy and its treatment, the Morisky-Green test clearly demonstrated that they actually were not aware of the principles of therapy, which is evidenced by the low degree of treatment adherence

Toxicity of the therapeutic potassium permanganate to tilapia Oreochromis niloticus and to non-target organisms Ceriodaphnia dubia (microcrustacean cladocera) and Pseudokirchneriella subcapitata (green microalgae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fast dynamics in the optical storage with Langmuir-Blodgett films of a diazocrown ether molecule

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of respiratory biofeedback associated to re-expansive ventilation patterns in individuals with functional mouth breathing

Objectives: Assess the effect of re-expansive respiratory patterns associated to respiratory biofeedback (RBF) on pulmonary function, respiratory muscle strength and habits in individuals with functional mouth breathing (FMB).Methods: Sixty children with FMB were divided into experimental and control groups. The experimental group was submitted to 15 sessions of re-expansive respiratory patterns associated to RBF (biofeedback pletsmovent; MICROHARD (R) V1.0), which provided biofeedback of the thoracic and abdominal movements. The control group was submitted to 15 sessions using biofeedback alone. Spirometry, maximum static respiratory pressure measurements and questions regarding habits (answered by parents/guardians) were carried out before and after therapy. The Student's t-test for paired data and non-parametric tests were employed for statistical analysis at a 5% Level of significance.Results: Significant changes were found in forced vital. capacity, Tiffeneau index scores, maximum expiratory pressure, maximum inspiratory pressure and habits assessed in FMB with the use of RBF associated to the re-expansive patterns. No significant differences were found comparing the experimental and control groups.Conclusions: The results allow the conclusion that RBF associated to re-expansive patterns improves forced vital capacity, Tiffeneau index scores, respiratory muscle strength and habits in FMB and can therefore be used as a form of therapy for such individuals. (C) 2008 Elsevier B.V. All rights reserved.

Heterodyne Interferometry Applied to the Characterization of Acousto-Electro-Optic Light Modulators

When the electro-optic and acousto-optic effects are combined into a single device, the resulting acousto-electro-optic (AEO) modulator shows improved flexibility to overcome some limitations of the individual modulators or their cascade combinations. By using optical interferometry, it is possible to investigate the AEO modulator behavior as a function of this applied voltage. By this way, a lithium niobate AEO modulator is positioned in one of the arms of a Mach-Zehnder interferometer and operates at 62 MHz frequency, which constitutes the intermediate frequency of the heterodyne interferometer. Operating the AEO modulator in the acousto-optic small diffraction efficiency regime, the photodetected signal amplitude and phase are analyzed, and the induced phase shift, transmission curve and linearity response are obtained. The experimental results show good agreement with that expected from the coupled-mode theory. The possibility of linear control of the optical phase shift by the external voltage, from 0 to 2 p radians, is demonstrated.

Clinical and Histological Effects of the Intrathecal Administration of Methylprednisolone in Dogs

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Adjuvant therapy with GnRH agonists/tamoxifen in breast cancer should be a good council for patients with hormone receptor-positive tumours and wish to preserve fertility

Infertility represents one of the main long-term consequences of the chemotherapy used for the adjuvant treatment of breast cancer. Approximately 60-65% of breast cancers express the nuclear hormone receptor in premenopausal women. Adjuvant endocrine therapy is an integral component of care for patients with hormone receptor-positive (HR+) tumours. The GnRH agonist (GnRHa) alone or in combination with tamoxifen produces results at least similar to those obtained with the different chemotherapy protocols in patients with HR+ breast cancer with respect to recurrence-free survival and overall survival. It is time to indicate adjuvant therapy with GnRHa associated with tamoxifen for patients with breast cancer (HR+ tumours) if they want to preserve their reproductive function. The evaluation of ovarian reserve tests: follicle stimulating hormone (FSH), anti-Mullerian hormone (AMH), inhibin B, antral follicle count (AFC) and ovarian volume 6 months, and 1 year after the end of therapy with GnRHa/tamoxifen must be realised. The recurrence-free survival and overall survival should be analysed. The major implication of this hypothesis will be to avoid adjuvant chemotherapy for patients with breast cancer (HR+ tumours) that request fertility preservation. It is expected that ovarian function should not be altered in almost all cases and subsequent pregnancy a real possibility. (C) 2012 Elsevier Ltd. All rights reserved.

Hematoporphyrin-based photodynamic therapy for cutaneous squamous cell carcinoma in cats

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analysis in vitro of direct bonding system with cyanoacrylate ester and orthodontic wires

The aim of this study was to evaluate the tensile strength of orthodontic wires bonded onto the enamel with cyanoacrylate ester. To obtain the specimens, 120 human premolars (extracted for orthodontic or periodontal reasons) were included in acrylic blocks of rapid polymerization with three teeth each. Four groups were formed with ten specimens each. In the specimens, a dental splint model was made with cyanoacrylate ester and round stainless steel wire. In groups I, II and III, cyanoacrylate ester was used with round steel wires, with variation in diameter: 0.014 inches; 0.016 inches and 0.018 inches, respectively. In group IV, round steel wire 0.018 inches was used with photo polymerizing resin composite with previous acid etching. The adhesive force of the materials was measured in two points under the action of the tensiometer (ETM-USA). The number of loose wires was counted along with those that remained fixed according to the different levels of force applied because of the direction of the tensile force (vertical or horizontal) and the diameter of the wire used. The data obtained were first submitted to a descriptive analysis and then submitted to a statistical analysis (Friedman's Test and Dunn's Test of Multiple Comparison - Epi-info 3.2). Within the limitations of the experimental conditions presented, the cyanoacrylate ester or 'Super Bonder (R)' maintained bonded to enamel and steel wires (0.016 and 0.018 inches) during the tensile strength tests under different levels of applied forces.

Effect of Flasking and Polymerization Techniques on Tooth Movement in Complete Denture Processing

Purpose: The purpose of this study was to compare the artificial tooth positional changes following the flasking and polymerization of complete dentures by a combination of two flasking methods and two polymerization techniques using computer graphic measurements.Materials and Methods: Four groups of waxed complete dentures (n = 10) were invested and polymerized using the following techniques: (1) adding a second investment layer of gypsum and conventional water bath polymerization (Control), (2) adding a second investment layer of gypsum and polymerization with microwave energy (Gyp-micro), (3) adding a second investment layer of silicone (Zetalabor) and conventional polymerization (Silwater), and (4) adding a second investment layer of silicone and polymerization with microwave energy (Silmicro). For each specimen, six segments of interdental distances (A to F) were measured to determine the artificial tooth positions in the waxed and polymerized stages using software program AutoCad R14. The mean values of the changes were statistically compared by univariate ANOVA with Tukey post-hoc test at 5% significance.Results: There were no significant differences among the four groups, except for segment D of the Silmicro group (-0.004 +/- 0.032 cm) in relation to the Gypwater group (0.044 +/- 0.031 cm) (p < 0.05), which presented, repectively, expansion and shrinkage after polymerization.Conclusions: Within the limitations of this study, it was concluded that although the differences were not statistically significant, the use of a silicone investment layer when flasking complete dentures resulted in the least positional changes of the artificial teeth regardless of the polymerization technique.