Cryogenic Silicon Optical Reference Cavities

Thermodynamical fluctuations in temperature and position exist in every physical system, and show up as a fundamental noise limit whenever we choose to measure some quantity in a laboratory environment. Thermodynamical fluctuations in the position of the atoms in the dielectric coatings on the mirrors for optical cavities at the forefront of precision metrology (e.g., LIGO, the cavities which probe atomic transitions to define the second) are a current limiting noise source for these experiments, and anything which involves locking a laser to an optical cavity. These thermodynamic noise sources scale physical geometry of experiment, material properties (such as mechanical loss in our dielectric coatings), and temperature. The temperature scaling provides a natural motivation to move to lower temperatures, with a potential huge benefit for redesigning a room temperature experiment which is limited by thermal noise for cryogenic operation.

We design, build, and characterize a pair of linear Fabry-Perot cavities to explore limitations to ultra low noise laser stabilization experiments at cryogenic temperatures. We use silicon as the primary material for the cavity and mirrors, due to a zero crossing in its linear coefficient of thermal expansion (CTE) at 123 K, and other desirable material properties. We use silica tantala coatings, which are currently the best for making high finesse low noise cavities at room temperature. The material properties of these coating materials (which set the thermal noise levels) are relatively unknown at cryogenic temperatures, which motivates us to study them at these temperatures. We were not able to measure any thermal noise source with our experiment due to excess noise. In this work we analyze the design and performance of the cavities, and recommend a design shift from mid length cavities to short cavities in order to facilitate a direct measurement of cryogenic coating noise.

In addition, we measure the cavities (frequency dependent) photo-thermal response. This can help characterize thermooptic noise in the coatings, which is poorly understood at cryogenic temperatures. We also explore the feasibility of using the cavity to do macroscopic quantum optomechanics such as ground state cooling.

Theoretical investigations of experimental gravitation

This thesis has two basic themes: the investigation of new experiments which can be used to test relativistic gravity, and the investigation of new technologies and new experimental techniques which can be applied to make gravitational wave astronomy a reality.

Advancing technology will soon make possible a new class of gravitation experiments: pure laboratory experiments with laboratory sources of non-Newtonian gravity and laboratory detectors. The key advance in techno1ogy is the development of resonant sensing systems with very low levels of dissipation. Chapter 1 considers three such systems (torque balances, dielectric monocrystals, and superconducting microwave resonators), and it proposes eight laboratory experiments which use these systems as detectors. For each experiment it describes the dominant sources of noise and the technology required.

The coupled electro-mechanical system consisting of a microwave cavity and its walls can serve as a gravitational radiation detector. A gravitational wave interacts with the walls, and the resulting motion induces transitions from a highly excited cavity mode to a nearly unexcited mode. Chapter 2 describes briefly a formalism for analyzing such a detector, and it proposes a particular design.

The monitoring of a quantum mechanical harmonic oscillator on which a classical force acts is important in a variety of high-precision experiments, such as the attempt to detect gravitational radiation. Chapter 3 reviews the standard techniques for monitoring the oscillator; and it introduces a new technique which, in principle, can determine the details of the force with arbitrary accuracy, despite the quantum properties of the oscillator.

The standard method for monitoring the oscillator is the "amplitude- and-phase" method (position or momentum transducer with output fed through a linear amplifier). The accuracy obtainable by this method is limited by the uncertainty principle. To do better requires a measurement of the type which Braginsky has called "quantum nondemolition." A well-known quantum nondemolition technique is "quantum counting," which can detect an arbitrarily weak force, but which cannot provide good accuracy in determining its precise time-dependence. Chapter 3 considers extensively a new type of quantum nondemolition measurement - a "back-action-evading" measurement of the real part X₁ (or the imaginary part X₂) of the oscillator's complex amplitude. In principle X₁ can be measured arbitrarily quickly and arbitrarily accurately, and a sequence of such measurements can lead to an arbitrarily accurate monitoring of the classical force.

Chapter 3 describes explicit gedanken experiments which demonstrate that X₁ can be measured arbitrarily quickly and arbitrarily accurately, it considers approximate back-action-evading measurements, and it develops a theory of quantum nondemolition measurement for arbitrary quantum mechanical systems.

In Rosen's "bimetric" theory of gravity the (local) speed of gravitational radiation v_g is determined by the combined effects of cosmological boundary values and nearby concentrations of matter. It is possible for v_g to be less than the speed of light. Chapter 4 shows that emission of gravitational radiation prevents particles of nonzero rest mass from exceeding the speed of gravitational radiation. Observations of relativistic particles place limits on v_g and the cosmological boundary values today, and observations of synchrotron radiation from compact radio sources place limits on the cosmological boundary values in the past.

The structure of liquid argon as determined by x-ray diffraction

X-ray diffraction measurements and subsequent data analyses have been carried out on liquid argon at five states in the density range of 0.91 to 1.135 gm/cc and temperature range of 127 to 143°K. Duplicate measurements were made on all states. These data yielded radial distribution and direct correlation functions which were then used to compute the pair potential using the Percus-Yevick equation. The potential minima are in the range of -105 to -120°K and appear to substantiate current theoretical estimates of the effective pair potential in the presence of a weak three-body force.

The data analysis procedure used was new and does not distinguish between the coherent and incoherent absorption factors for the cell scattering which were essentially equal. With this simplification, the argon scattering estimate was compared to the gas scattering estimate on the laboratory frame of reference and the two estimates coincided, indicating the data normalized. The argon scattering on the laboratory frame of reference was examined for the existence of the peaks in the structure factor and the existence of an observable third peak was considered doubtful.

Numerical studies of the effect of truncation, normalization, the subsidiary peak phenomenon in the radial distribution function, uncertainties in the low angle data relative to errors in the direct correlation function and the distortion phenomenon are presented.

The distortion phenomenon for this experiment explains why the Mikolaj-Pings argon data yielded pair potential well depths from the Percus-Yevick equation that were too shallow and an apparent slope with respect to density that was too steep compared to theoretical estimates.

The data presented for each measurement are: empty cell and cell plus argon intensity, absorption factors, argon intensity, smoothed argon intensity, smoothed argon intensity corrected for distortion, structure factor, radial distribution function, direct correlation function and the pair potential from the Percus-Yevick equation.

Efeitos da suplementação oral com L-arginina e L-glutamina sobre a próstata ventral de ratos submetidos à irradiação

O objetivo deste trabalho foi verificar o possível efeito protetor da L-glutamina e da L-arginina sobre a próstata ventral de ratos quando administradas por gavagem. Procurou-se simular as condições clinicas de pacientes submetidos à radioterapia pélvica tendo como órgão alvo outro órgão pélvico que não a próstata. Foram analisados os efeitos desta irradiação sobre a próstata considerando este órgão como normal. Foram utilizados ratos Wistar divididos em quatro grupos: Controle, animais não submetidos à irradiação (n= 10); Irradiado, submetidos à irradiação abdominal e sem suplementação adicional de aminoácido por 21 dias (n= 10); Irradiado + Lglutamina, submetidos à irradiação abdominal e com suplementação adicional de L- glutamina por 21 dias (n= 10); e Irradiado + L-arginina, submetidos à irradiação abdominal e com suplementação adicional de L- arginina por 21 dias (n= 9). Os grupos foram mantidos em condições padrão de laboratório durante todas as etapas do experimento. Os animais submetidos à irradiação abdominal receberam uma dose única de 1000 cGy no dia 8 da experimentação. A Lglutamina e a L-arginina foram dissolvidas em água destilada e administrada por gavagem através da agulha IC-810. As próstatas foram removidas e processadas para inclusão em parafina. Foram estudados os seguintes parâmetros: estrutura acinar (área dos ácinos e altura do epitélio) e colágeno analisados por métodos morfométricos e peso corporal. O ganho de peso nos grupos suplementados foi significativamente maior se comparado ao grupo irradiado. Houve redução da altura do epitélio no grupo irradiado quando comparado ao controle. A altura do epitélio no grupo suplementado com L-arginina foi significativamente maior do que nos grupos irradiado e suplementado com L-glutamina. Houve diminuição, de aproximadamente 18%, da área dos ácinos no grupo suplementado com L-glutamina. Já no grupo suplementado com Larginina o valor foi similar ao do controle. O efeito da L-glutamina sobre o parênquima prostático foi o de manter proporcionalmente o colágeno, preservando a integridade da matriz extracelular. No grupo suplementado com L-arginina, apesar da discreta redução na distribuição proporcional de colágeno este também manteve índices semelhantes ao do controle. A radiação abdominal promoveu algumas modificações estruturais na próstata ventral de ratos. Essas modificações podem ser parcialmente prevenidas pela suplementação oral com L-glutamina e de L-arginina.

Fibroblastos gengivais humanos em co-cultura com Aggregatibacter actinomycetemcomitans lisogênico induzem a liberação de fago

A relação entre bacteriófagos e virulência bacteriana é um modelo muito intrigante e pouco estudado na patogênese periodontal, uma vez que um patógeno periodontal pode ser lisogênico. O objetivo do nosso estudo é determinar a capacidade de fibroblastos gengivais humanos de induzir as cepas lisogênicas de Aggregatibacter actinomycetemcomitans. Dois experimentos foram realizados seguidos da titulação de fago. Os experimentos consistiram da co-cultura com fibroblastos gengivais humanos e três cepas de Aa [Aa29524, Aa2112, Aa29524(Ø2112)], não lisogênica, lisogênica e lisogênica induzida em laboratório, respectivamente. Em três momentos distintos (no experimento 1: 0, 2 e 4 horas; e no experimento 2: 2, 4 e 6 horas), o sobrenadante da co-cultura foi filtrado e cultivado overnight com a bactéria indicadora (Aa29524) e analisado para a capacidade de lisar a célula indicadora. Em ambos os experimentos, o sobrenadante da co-cultura de fibroblastos gengivais humanos com Aa lisogênico e Aa lisogênico induzido em laboratório, ao ser cultivado com a bactéria indicadora, promoveu lise da mesma, resultando no aumento da produção de fago. Pode-se concluir que, nesse estudo os fibroblastos gengivais humanos foram capazes de induzir cepas lisogênicas de Aggregatibacter actinomycetemcomitans.