Physics-Based Modeling of Power System Components for the Evaluation of Low-Frequency Radiated Electromagnetic Fields

The low-frequency electromagnetic compatibility (EMC) is an increasingly important aspect in the design of practical systems to ensure the functional safety and reliability of complex products. The opportunities for using numerical techniques to predict and analyze system’s EMC are therefore of considerable interest in many industries. As the first phase of study, a proper model, including all the details of the component, was required. Therefore, the advances in EMC modeling were studied with classifying analytical and numerical models. The selected model was finite element (FE) modeling, coupled with the distributed network method, to generate the model of the converter’s components and obtain the frequency behavioral model of the converter. The method has the ability to reveal the behavior of parasitic elements and higher resonances, which have critical impacts in studying EMI problems. For the EMC and signature studies of the machine drives, the equivalent source modeling was studied. Considering the details of the multi-machine environment, including actual models, some innovation in equivalent source modeling was performed to decrease the simulation time dramatically. Several models were designed in this study and the voltage current cube model and wire model have the best result. The GA-based PSO method is used as the optimization process. Superposition and suppression of the fields in coupling the components were also studied and verified. The simulation time of the equivalent model is 80-100 times lower than the detailed model. All tests were verified experimentally. As the application of EMC and signature study, the fault diagnosis and condition monitoring of an induction motor drive was developed using radiated fields. In addition to experimental tests, the 3DFE analysis was coupled with circuit-based software to implement the incipient fault cases. The identification was implemented using ANN for seventy various faulty cases. The simulation results were verified experimentally. Finally, the identification of the types of power components were implemented. The results show that it is possible to identify the type of components, as well as the faulty components, by comparing the amplitudes of their stray field harmonics. The identification using the stray fields is nondestructive and can be used for the setups that cannot go offline and be dismantled

Analysis of Transmission System Adequacy Considering the Constrained Fuzzy Power Flow

Power flow calculations are one of the most important tools for power system planning and operation. The need to account for uncertainties when performing power flow studies led, among others methods, to the development of the fuzzy power flow (FPF). This kind of models is especially interesting when a scarcity of information exists, which is a common situation in liberalized power systems (where generation and commercialization of electricity are market activities). In this framework, the symmetric/constrained fuzzy power flow (SFPF/CFPF) was proposed in order to avoid some of the problems of the original FPF model. The SFPF/CFPF models are suitable to quantify the adequacy of transmission network to satisfy “reasonable demands for the transmission of electricity” as defined, for instance, in the European Directive 2009/72/EC. In this work it is illustrated how the SFPF/CFPF may be used to evaluate the impact on the adequacy of a transmission system originated by specific investments on new network elements

Safe operation of transmission system considering EV at distribution level

In this paper, the IEEE 14 bus test system is used in order to perform adequacy assessment of a transmission system when large scale integration of electric vehicles is considered at distribution levels. In this framework, the symmetric/constr ained fuzzy power flow (SFPF/CFPF) was proposed. The SFPF/CFPF models are suitable to quantify the adequacy of transmission network to satisfy “reasonable demands for the transmission of electricity” as defined, for instance, in the European Directive 2009/72/EC. In this framework, electric vehicles of different types will be treated as fuzzy loads configuring part of the “reasonable demands”. With this study, it is also intended to show how to evaluate the amount of EVs that can be safely accommodated to the grid meeting a certain adequacy level.

Diageo's 'Stop Out of Control Drinking' campaign in Ireland: an analysis

Background: It has been argued that the alcohol industry uses corporate social responsibility activities to influence policy and undermine public health, and that every opportunity should be taken to scrutinise such activities. This study analyses a controversial Diageo-funded ‘responsible drinking’ campaign (“Stop out of Control Drinking”, or SOOCD) in Ireland. The study aims to identify how the campaign and its advisory board members frame and define (i) alcohol-related harms, and their causes, and (ii) possible solutions. Methods: Documentary analysis of SOOCD campaign material. This includes newspaper articles (n = 9), media interviews (n = 11), Facebook posts (n = 92), and Tweets (n = 340) produced by the campaign and by board members. All material was coded inductively, and a thematic analysis undertaken, with codes aggregated into sub-themes. Results: The SOOCD campaign utilises vague or self-defined concepts of ‘out of control’ and ‘moderate’ drinking, tending to present alcohol problems as behavioural rather than health issues. These are also unquantified with respect to actual drinking levels. It emphasises alcohol-related antisocial behaviour among young people, particularly young women. In discussing solutions to alcohol-related problems, it focuses on public opinion rather than on scientific evidence, and on educational approaches and information provision, misrepresenting these as effective. “Moderate drinking” is presented as a behavioural issue (“negative drinking behaviours”), rather than as a health issue. Conclusions: The ‘Stop Out of Control Drinking’ campaign frames alcohol problems and solutions in ways unfavourable to public health, and closely reflects other Diageo Corporate Social Responsibility (CSR) activity, as well as alcohol and tobacco industry strategies more generally. This framing, and in particular the framing of alcohol harms as a behavioural issue, with the implication that consumption should be guided only by self-defined limits, may not have been recognised by all board members. It suggests a need for awareness-raising efforts among the public, third sector and policymakers about alcohol industry strategies

Efficacy and safety of out-of-hospital intravenous metoprolol administration in anterior ST-segment elevation acute myocardial infarction: insights from the METOCARD-CNIC trial

We seek to examine the efficacy and safety of prereperfusion emergency medical services (EMS)–administered intravenous metoprolol in anterior ST-segment elevation myocardial infarction patients undergoing eventual primary angioplasty. This is a prespecified subgroup analysis of the Effect of Metoprolol in Cardioprotection During an Acute Myocardial Infarction trial population, who all eventually received oral metoprolol within 12 to 24 hours. We studied patients receiving intravenous metoprolol by EMS and compared them with others treated by EMS but not receiving intravenous metoprolol. Outcomes included infarct size and left ventricular ejection fraction on cardiac magnetic resonance imaging at 1 week, and safety by measuring the incidence of the predefined combined endpoint (composite of death, malignant ventricular arrhythmias, advanced atrioventricular block, cardiogenic shock, or reinfarction) within the first 24 hours. From the total population of the trial (N=270), 147 patients (54%) were recruited during out-of-hospital assistance and transferred to the primary angioplasty center (74 intravenous metoprolol and 73 controls). Infarct size was smaller in patients receiving intravenous metoprolol compared with controls (23.4 [SD 15.0] versus 34.0 [SD 23.7] g; adjusted difference –11.4; 95% confidence interval [CI] –18.6 to –4.3). Left ventricular ejection fraction was higher in the intravenous metoprolol group (48.1% [SD 8.4%] versus 43.1% [SD 10.2%]; adjusted difference 5.0; 95% CI 1.6 to 8.4). Metoprolol administration did not increase the incidence of the prespecified safety combined endpoint: 6.8% versus 17.8% in controls (risk difference –11.1; 95% CI –21.5 to –0.6). Out-of-hospital administration of intravenous metoprolol by EMS within 4.5 hours of symptom onset in our subjects reduced infarct size and improved left ventricular ejection fraction with no excess of adverse events during the first 24 hours.

Can birds play a role as High Nature Value indicators of montado system?

Montados form a heterogeneous landscape of wooded matrix dominated by cork and/or holm oak with open areas characterized by fuzzy boundaries. Montado supports a high biological diversity associated to low intensity management and a landscape diversity provided by a continuous gradient of land cover. Among other features this permits the classification of montados as a High Nature Value (HNV) system. We assessed the role of birds as HNV indicators for montado, and tested several bird groups—farmland, edge, forest generalists and forest specialists species; and some universal indicators such as species conservation status, Shannon’s diversity index and species richness. Our study areas covered the North–South distribution of cork oak in Portugal, and we surveyed the breeding bird communities across 117 sampling sites. In addition to variables related to management and sanitary status, we considered variables that characterize the landscape heterogeneity inside the montado—trees and shrub density and richness of woody vegetation. Our results suggest that specific bird guilds can be used as HNV indicators of particular typologies of montado, and highlight the need to develop an indicator that could be transversally applied to all types of montado.

Chemical characteristics of the clusters and production of 'BRS Clara' grapevine under protected cultivation during out of season crop.

2011

Analysis of the Variability of Carbonate System Parameters in the North-East Atlantic.

The purpose of this thesis is to analyse the spatial and temporal variability of the aragonite saturation state (ΩAR), commonly used as an indicator of ocean acidification, in the North-East Atlantic. When the aragonite saturation state decreases below a certain threshold, ΩAR <1, calcifying organisms (i.e. molluscs, pteropods, foraminifera, crabs, etc.) are subject to dissolution of shells and aragonite structures. This objective agrees with the challenge 'Ocean, climate change and acidification' of the EU COST Ocean Governance for Sustainability project, which aims to combine the information collected on the state of health of the oceans. Two open-sources data products, EMODnet and GLODAPv2, have been integrated and analysed for the first time in the North-East Atlantic region. The integrated dataset contains 1038 ΩAR vertical profiles whose time distribution spans from 1970 to 2014. The ΩAR has been computed from CO2SYS software considering different combinations of input parameters, pH, Total Alkalinity (TAlk) and Dissolved Inorganic Carbon (DIC), associated with Temperature, Salinity and Pressure at in situ conditions. A sensitivity analysis has been performed to better understand the data consistency of ΩAR computed from the different combinations of pH, Talk and DIC and to verify the difference among observed TAlk and DIC parameters and their output values from the CO2SYS tool. Maps of ΩAR have been computed with the best data coverage obtained from the two datasets, at different levels of depth in the area of investigation and they have been compared to the work of Jiang et al. (2015). The results are consistent and show similar horizontal and vertical patterns. The study highlights some aragonite undersaturated values (ΩAR <1) below 500 meters depth, suggesting a potential effect of acidification in the considered time period. This thesis aims to be a preliminary work for future studies that will be able to design the ΩAR variability on a decadal distribution based on the extended time-series acquired in this work.

Processi ed innovazioni nel settore delle tecnologie out of autoclave per materiali compositi

Visto il crescente interesse nei confronti dei materiali compositi, per le numerose applicazioni e i vantaggi che offrono, stanno conoscendo notevole sviluppo le tecnologie Out of Autoclave (OoA). Esse sono alternative all'autoclave, che richiede tempi, costi e risorse maggiori, nonché ha una minore flessibilità. Le tecnologie OoA, invece, sono più rapide e meno costose, e stanno raggiungendo livelli di qualità e prestazioni molto vicini a quelli dell'autoclave. Questo elaborato presenta alcune delle innovazioni di maggior interesse, raggruppate per settori: processi, materiali e strutture dei laminati.

Teknisen kaupan lisäarvopalveluiden vaikutus toimitusvarmuuteen

Työn tarkoituksena oli selvittää toimitusvarmuuteen vaikuttavia tekijöitä sekä tuoda esille toimintaprosessia parantavia ehdotuksia. Selvitys pohjautui pääosin myöhästyneiden toimitusten ja tilausrivien tarkasteluun. Myöhästyneistä riveistä eroteltiin myöhästymisen aiheuttajat, joiden pohjalta kartoitettiin erilaisin menetelmin tilausten myöhästymisen syy. Toimitusvarmuuteen vaikuttavat tekijät löydettiin pääasiassa tuotannon ja myynnin yhteistyöhön liittyvistä tekijöistä. Tuotannon osalta ongelmiksi nousivat riittävän tarkkojen tuotannonohjaustietojen saanti ja runsaat vuorovaikutus- ja riippuvuussuhteet eri työvaiheiden välillä. Heikkojen tuotannonohjaustietojen johdosta tuotannon säätö ja ohjaus muuttuvissa olosuhteissa on hankalaa. Tämä ilmeni poissaolojen ja ruuhkien vaikutuksena toimitusvarmuuteen. Myynnin osalta ongelmat ilmenivät väärinä ja epärealistisina vahvistuksina. Tuotannon ja myynnin yhteistoiminnan lisäksi myyntikäyttäytymistä ohjaa ostokäyttäytyminen. Tämä voidaan johtaa yrityksen pyrkimyksestä palvella asiakkaitaan. Kehitysehdotukseksi rakennettiin koontivarastomalli, jonka avulla saadaan eri työpajojen välisiä riippuvuussuhteita vähennettyä. Lisäksi ko. malli mahdollistaa yksinkertaisemman ja helpomman tuotannon hallinnan ja tietojärjestelmän asianmukaisen käytön. Koontivarastomallin avulla on tarkoitus myös parantaa edellytyksiä ennakointikyvyn kehittämiseen sekä tuottaa tietoa toimitusaikojen määrityksen tueksi.

EU:n päästökaupan historia ja nykytila

Tässä työssä selvitetään, miten Euroopan Unionin päästökauppajärjestelmä on toiminut sen alusta vuodesta 2005 sen nykytilaan vuonna 2014. Erityisesti huomiota kiinnitetään päästöoikeuksien hintakehitykseen sekä käyttämättömien päästöoikeuksien kertymiseen. Työssä havaitaan, että ylimääräiset jaetut päästöoikeudet ovat aiheuttaneet päästöoikeuksien hinnan laskemista. Liian matalan hinnan seurauksena päästökauppa ei kannusta yrityksiä tekemään investointeja vihreään teknologiaan, vaikka se on yksi päästökauppajärjestelmän päätarkoitus YK:n ilmastosopimuksen täyttymisen varmistamisen ohella. Suurin syy käyttämättömien päästöoikeuksien kertymiseen on vuoden 2008 talouskriisi. Tätä ongelmaa korjataan väliaikaisesti siirtämällä päästöoikeuksia myöhemmin jaettavaksi. Lisää ratkaisuja odotetaan neljännelle päästökauppakaudelle.

Sistemas de produção de grãos e incidência de plantas daninhas

O sistema de semeadura direta e os diferentes sistemas de produção nele adotados podem contribuir para a supressão de plantas infestantes. em razão disso, o objetivo do presente trabalho foi avaliar o controle de plantas daninhas em função de diferentes sistemas de produção de grãos. Os tratamentos utilizados foram: I. Sistema safra-pousio - soja/ pousio/milho/pousio/arroz/pousio/soja; II. Sistema safra-adubo verde - soja/milheto/ milho/guandu/arroz/crotalária/soja; III. Sistema safra-safrinha - soja/aveia-branca/milho/ feijão-da-seca/arroz/mamona/soja; IV. Sistema safra - forrageira- soja + braquiária/milho + braquiária/arroz + braquiária/soja. em novembro de 2009 (após três safras agrícolas), foi realizado o levantamento de plantas daninhas infestantes. Para isso, foi utilizado um quadro (0,3 x 0,3 m), lançado aleatoriamente quatro vezes dentro de cada parcela. As plantas foram identificadas, bem como feita a determinação do número total das espécies invasoras, da massa seca e da porcentagem de controle das espécies de acordo com o sistema de produção. Foi realizada ainda a análise fitossociológica da comunidade de plantas daninhas infestantes. Os sistemas safra-adubo verde, safra-safrinha e safra-forrageira apresentaram bom controle de plantas infestantes quando comparados ao sistema safra-pousio. Portanto, a presença de algum tipo de cobertura é importante para manter as características do solo favorável e um bom controle de plantas invasoras.

An electric discharge as a trap for diffusion pump vacuum systems /

An electrical discharge is used as a trap for a diffusion pump using DC-704 silicone pump fluid. The discharge cracks the pump fluid vapor thus taking it out of the system. In the process much hydrogen and some other lighter gases are evolved.

A new ambulatory system for comparative evaluation of the three-dimensional knee kinematics, applied to anterior cruciate ligament injuries

The aim of this study was to develop an ambulatory system for the three-dimensional (3D) knee kinematics evaluation, which can be used outside a laboratory during long-term monitoring. In order to show the efficacy of this ambulatory system, knee function was analysed using this system, after an anterior cruciate ligament (ACL) lesion, and after reconstructive surgery. The proposed system was composed of two 3D gyroscopes, fixed on the shank and on the thigh, and a portable data logger for signal recording. The measured parameters were the 3D mean range of motion (ROM) and the healthy knee was used as control. The precision of this system was first assessed using an ultrasound reference system. The repeatability was also estimated. A clinical study was then performed on five unilateral ACL-deficient men (range: 19-36 years) prior to, and a year after the surgery. The patients were evaluated with the IKDC score and the kinematics measurements were carried out on a 30 m walking trial. The precision in comparison with the reference system was 4.4 degrees , 2.7 degrees and 4.2 degrees for flexion-extension, internal-external rotation, and abduction-adduction, respectively. The repeatability of the results for the three directions was 0.8 degrees , 0.7 degrees and 1.8 degrees . The averaged ROM of the five patients' healthy knee were 70.1 degrees (standard deviation (SD) 5.8 degrees), 24.0 degrees (SD 3.0 degrees) and 12.0 degrees (SD 6.3 degrees for flexion-extension, internal-external rotation and abduction-adduction before surgery, and 76.5 degrees (SD 4.1 degrees), 21.7 degrees (SD 4.9 degrees) and 10.2 degrees (SD 4.6 degrees) 1 year following the reconstruction. The results for the pathologic knee were 64.5 degrees (SD 6.9 degrees), 20.6 degrees (SD 4.0 degrees) and 19.7 degrees (8.2 degrees) during the first evaluation, and 72.3 degrees (SD 2.4 degrees), 25.8 degrees (SD 6.4 degrees) and 12.4 degrees (SD 2.3 degrees) during the second one. The performance of the system enabled us to detect knee function modifications in the sagittal and transverse plane. Prior to the reconstruction, the ROM of the injured knee was lower in flexion-extension and internal-external rotation in comparison with the controlateral knee. One year after the surgery, four patients were classified normal (A) and one almost normal (B), according to the IKDC score, and changes in the kinematics of the five patients remained: lower flexion-extension ROM and higher internal-external rotation ROM in comparison with the controlateral knee. The 3D kinematics was changed after an ACL lesion and remained altered one year after the surgery