Vertical specialisation indicator based on supply-driven input-output model

“Import content of exports”, based on Leontief’s demand-driven input-output model, has been widely used as an indicator to measure a country’s degree of participation in vertical specialisation trade. At a sectoral level, this indicator represents the share of inter-mediates imported by all sectors embodied in a given sector’s exported output. However, this indicator only reflects one aspect of vertical specialisation – the demand side. This paper discusses the possibility of using the input-output model developed by Ghosh to measure the vertical specialisation from the perspective of the supply side. At a sector level, the Ghosh type indicator measures the share of imported intermediates used in a sector’s production that are subsequently embodied in exports by all sectors. We estimate these two indicators of vertical specialisation for 47 selected economies for 1995, 2000, 2005 using the OECD’s harmonized input-output database. In addition, the potential biases of both indicators due to the treatment of net withdrawals in inventories, are also discussed.

Domestic, vertical, and horizontal multinationals : a general equilibrium approach using the "knowledge capital model"

One of the key factors behind the growth in global trade in recent decades is an increase in intermediate input as a result of the development of vertical production networks (Feensta, 1998). It is widely recognized that the formation of production networks is due to the expansion of multinational enterprises' (MNEs) activities. MNEs have been differentiated into two types according to their production structure: horizontal and vertical foreign direct investment (FDI). In this paper, we extend the model presented by Zhang and Markusen (1999) to include horizontal and vertical FDI in a model with traded intermediates, using numerical general equilibrium analysis. The simulation results show that horizontal MNEs are more likely to exist when countries are similar in size and in relative factor endowments. Vertical MNEs are more likely to exist when countries differ in relative factor endowments, and trade costs are positive. From the results of the simulation, lower trade costs of final goods and differences in factor intensity are conditions for attracting vertical MNEs.

Inmovilización de TiO2 sobre polímeros transparentes en el UV-A para la eliminación fotocatalítica de tricloroetileno en aire

El gran desarrollo industrial y demográfico de las últimas décadas ha dado lugar a un consumo crecientemente insostenible de energía y materias primas, que influye negativamente en el ambiente por la gran cantidad de contaminantes generados. Entre las emisiones tienen gran importancia los compuestos orgánicos volátiles (COV), y entre ellos los compuestos halogenados como el tricloroetileno, debido a su elevada toxicidad y resistencia a la degradación. Las tecnologías generalmente empleadas para la degradación de estos compuestos presentan inconvenientes derivados de la generación de productos tóxicos intermedios o su elevado coste. Dentro de los procesos avanzados de oxidación (Advanced Oxidation Processes AOP), la fotocatálisis resulta una técnica atractiva e innovadora de interés creciente en su aplicación para la eliminación de multitud de compuestos orgánicos e inorgánicos, y se ha revelado como una tecnología efectiva en la eliminación de compuestos orgánicos volátiles clorados como el tricloroetileno. Además, al poder aprovechar la luz solar como fuente de radiación UV permite una reducción significativa de costes energéticos y de operación. Los semiconductores más adecuados para su empleo como fotocatalizadores con aprovechamiento de la luz solar son aquellos que tienen una banda de energía comparable a la de los fotones de luz visible o, en su defecto, de luz ultravioleta A (Eg < 3,5 eV), siendo el más empleado el dióxido de titanio (TiO2). El objetivo principal de este trabajo es el estudio de polímeros orgánicos comerciales como soporte para el TiO2 en fotocatálisis heterogénea y su ensayo para la eliminación de tricloroetileno en aire. Para ello, se han evaluado sus propiedades ópticas y su resistencia a la fotodegradación, y se ha optimizado la fijación del fotocatalizador para conseguir un recubrimiento homogéneo, duradero y con elevada actividad fotocatalítica en diversas condiciones de operación. Los materiales plásticos ensayados fueron el polietileno (PE), copolímero de etil vinil acetato con distintos aditivos (EVA, EVA-H y EVA-SH), polipropileno (PP), polimetil (metacrilato) fabricado en colada y extrusión (PMMA-C y PMMA-E), policarbonato compacto y celular (PC-C y PC-Ce), polivinilo rígido y flexible (PVC-R y PVC-F), poliestireno (PS) y poliésteres (PET y PETG). En base a sus propiedades ópticas se seleccionaron el PP, PS, PMMA-C, EVA-SH y PVC-R, los cuales mostraron un valor de transmitancia superior al 80% en el entorno de la región estudiada (λ=365nm). Para la síntesis del fotocatalizador se empleó la tecnología sol-gel y la impregnación multicapa de los polímeros seleccionados por el método de dip-coating con secado intermedio a temperaturas moderadas. Con el fin de evaluar el envejecimiento de los polímeros bajo la radiación UV, y el efecto sobre éste del recubrimiento fotoactivo, se realizó un estudio en una cámara de exposición a la luz solar durante 150 días, evaluándose la resistencia química y la resistencia mecánica. Los resultados de espectroscopía infrarroja y del test de tracción tras el envejecimiento revelaron una mayor resistencia del PMMA y una degradación mayor en el PS, PVC-R y EVA SH, con una apreciable pérdida del recubrimiento en todos los polímeros. Los fotocatalizadores preparados sobre soportes sin tratamiento y con tres capas de óxido de titanio mostraron mejores resultados de actividad con PMMA-C, PET y PS, con buenos resultados de mineralización. Para conseguir una mayor y mejor fijación de la película al soporte se realizaron tratamientos químicos abrasivos con H2SO4 y NaOH y tratamientos de funcionalización superficial por tecnología de plasma a presión atmosférica (APP) y a baja presión (LPP). Con los tratamientos de plasma se consiguió una excelente mojabilidad de los soportes, que dio lugar a una distribución uniforme y más abundante del fotocatalizador, mientras que con los tratamientos químicos no se obtuvo una mejora significativa. Asimismo, se prepararon fotocatalizadores con una capa previa de dióxido de silicio con la intervención de surfactantes (PDDA-SiO2-3TiO2 y SiO2FC-3TiO2), consiguiéndose buenas propiedades de la película en todos los casos. Los mejores resultados de actividad con tratamiento LPP y tres capas de TiO2 se lograron con PMMA-C (91% de conversión a 30 ppm de TCE y caudal 200 ml·min-1) mejorando significativamente también la actividad fotocatalítica en PVC-R y PS. Sin embargo, el material más activo de todos los ensayados fue el PMMA-C con el recubrimiento SiO2FC-3TiO2, logrando el mejor grado de mineralización, del 45%, y una velocidad de 1,89 x 10-6 mol· m-2 · s-1, que dio lugar a la eliminación del 100 % del tricloroetileno en las condiciones anteriormente descritas. A modo comparativo se realizaron ensayos de actividad con otro contaminante orgánico tipo, el formaldehído, cuya degradación fotocatalítica fue también excelente (100% de conversión y 80% de mineralización con 24 ppm de HCHO en un caudal de aire seco de 200 ml·min-1). Los buenos resultados de actividad obtenidos confirman las enormes posibilidades que ofrecen los polímeros transparentes en el UV-A como soportes del dióxido de titanio para la eliminación fotocatalítica de contaminantes en aire. ABSTRACT The great industrial and demographic development of recent decades has led to an unsustainable increase of energy and raw materials consumption that negatively affects the environment due to the large amount of waste and pollutants generated. Between emissions generated organic compounds (VOCs), specially the halogenated ones such as trichloroethylene, are particularly important due to its high toxicity and resistance to degradation. The technologies generally used for the degradation of these compounds have serious inconveniences due to the generation of toxic intermediates turn creating the problem of disposal besides the high cost. Among the advanced oxidation processes (AOP), photocatalysis is an attractive and innovative technique with growing interest in its application for the removal of many organic and inorganic compounds, and has emerged as an effective technology in eliminating chlorinated organic compounds such as trichloroethylene. In addition, as it allows the use of sunlight as a source of UV radiation there is a significant reduction of energy costs and operation. Semiconductors suitable to be used as photocatalyst activated by sunlight are those having an energy band comparable to that of the visible or UV-A light (Eg <3,5 eV), being titanium dioxide (TiO2), the most widely used. The main objective of this study is the test of commercial organic polymers as supports for TiO2 to be applied in heterogeneous photocatalysis and its assay for removing trichloroethylene in air. To accomplish that, its optical properties and resistance to photooxidation have been evaluated, and different operating conditions have been tested in order to optimize the fixation of the photocatalyst to obtain a homogeneous coating, with durable and high photocatalytic activity. The plastic materials tested were: polyethylene (PE), ethyl vinyl acetace copolymers with different additives (EVA, EVA-H and EVA -SH), polypropylene (PP), poly methyl (methacrylate) manufactured by sheet moulding and extrusion (PMMA-C and PMMA-E), compact and cellular polycarbonates (PC-C PC-Ce), rigid and flexible polyvinyl chloride (PVC-R and PVC-F), polystyrene (PS) and polyesters (PET and PETG). On the basis of their optical properties PP, PS, PMMA-C, EVA-SH and PVC-R were selected, as they showed a transmittance value greater than 80% in the range of the studied region (λ = 365nm). For the synthesis of the photocatalyst sol-gel technology was employed with multilayers impregnation of the polymers selected by dip-coating, with intermediate TiO2 drying at moderate temperatures. To evaluate the polymers aging due to UV radiation, and the effect of photoactive coating thereon, a study in an sunlight exposure chamber for 150 days was performed, evaluating the chemical resistance and the mechanical strength. The results of infrared spectroscopy and tensile stress test after aging showed the PMMA is the most resistant sample, but a greater degradation in PS, PVC-R and EVA SH, with a visible loss of the coating in all the polymers tested. The photocatalysts prepared on the untreated substrates with three layers of TiO2 showed better activity results when PMMA-C, PET and PS where used. To achieve greater and better fixation of the film to the support, chemical abrasive treatments, with H2SO4 and NaOH, as well as surface functionalization treatments with atmospheric pressure plasma (APP) and low pressure plasma (LPP) technologies were performed. The plasma treatment showed the best results, with an excellent wettability of the substrates that lead to a better and uniform distribution of the photocatalyst compared to the chemical treatments tested, in which no significant improvement was obtained. Also photocatalysts were prepared with the a silicon dioxide previous layer with the help of surfactants (SiO2- 3TiO2 PDDA-and-3TiO2 SiO2FC), obtaining good properties of the film in all cases. The best activity results for LPP-treated samples with three layers of TiO2 were achieved with PMMA-C (91% conversion, in conditions of 30 ppm of TCE and 200 ml·min-1 air flow rate), with a significant improvement of the photocatalytic activity in PVC-R and PS samples too. However, among all the materials assayed, PMMA-C with SiO2FC-3TiO2 coating was the most active one, achieving the highest mineralization grade (45%) and a reaction rate of 1,89 x 10-6 mol· m-2 · s-1, with total trichloroethylene elimination in the same conditions. As a comparative assay, an activity test was also performed with another typical organic contaminant, formaldehyde, also with good results (100% conversion with 24 ppm of HCHO and 200 ml·min-1 gas flow rate). The good activity results obtained in this study confirm the great potential of organic polymers which are transparent in the UV-A as supports for titanium dioxide for photocatalytic removal of air organic pollutants.

Utilización de bloqueadores metabólicos y optimización de las condiciones de aplicación para la reducción del grado alcohólico en vinos elaborados a partir de uva procedente de zonas cálidas

El presente trabajo de Tesis describe la posibilidad de modular la fermentación alcohólica utilizando bloqueadores metabólicos como furfural, o-vainillina, ácido cinámico, glicolaldehído, p-benzoquinona y cobre; para controlar la producción de etanol. El redireccionamiento de la ruta glicolítica en Saccharomyces cerevisiae favorece el descenso del grado alcohólico gracias al aumento de la producción de metabolitos secundarios de interés enológico. La primera parte de la Tesis presenta una revisión bibliográfica sobre estudios previos en los que se ha evaluado el efecto de los diferentes bloqueadores metabólicos en la producción de etanol durante la fermentación alcohólica. La segunda parte muestra los resultados experimentales de producción de etanol obtenidos con los bloqueadores metabólicos, observándose una amplia variabilidad en su efecto en función de la naturaleza química de cada bloqueador y de la naturaleza del medio fermentativo utilizado. Finalmente, la tercera parte del trabajo muestra el efecto de los bloqueadores metabólicos sobre los parámetros colorimétricos y la producción de metabolitos secundarios, observándose un importante efecto en la producción de glicerina y en algunos de los compuestos volátiles fermentativos. La principal aplicación de esta tecnología basada en la utilización de bloqueadores metabólicos sería la elaboración de vinos con una menor graduación alcohólica a partir de uva procedente de zonas cálidas. ABSTRACT This thesis describes the possibility of modulating the alcoholic fermentation using metabolic blockers such as furfural, o-vanillin, cinnamic acid, glycolaldehyde, p-benzoquinone and copper. The controlled production of ethanol by redirecting of the glycolytic pathway in Saccharomyces cerevisiae, is achieved through diverting some of the carbohydrates away from alcohol production into the formation of glycolytic intermediates of interest to the winemaking industry. The first part of this work shows a literature review on previous studies about the effect of different metabolic blockers in order to reduce the ethanol production during alcoholic fermentation. The second part deals about the experimental results of ethanol production obtained with the metabolic blockers, showing a wide variation in the inhibitory effect depending on the chemical nature of each blocker and the nature of the fermentation medium used. Finally, the third part discussed about the effect of the metabolic blockers on colorimetric parameters and production of secondary metabolites, showing a significant effect on the production of glycerol and in some of the volatile fermentative compounds. The main application of this technology based on the use of metabolic blockers could lie in the preparation of reduced-alcohol wines from grapes grown in hot climate regions.

The structure of lean hydrogen-air flame balls

An analysis of the structure of flame balls encountered under microgravity conditions, which are stable due to radiant energy losses from H₂O, is carried out for fuel-lean hydrogen-air mixtures. It is seen that, because of radiation losses, in stable flame balls the maximum flame temperature remains close to the crossover temperature, at which the rate of the branching step H + O₂ -> OH + O equals that of the recombination step H + O₂ + M -> HO₂ + M. Under those conditions, all chemical intermediates have very small concentrations and follow the steady-state approximation, while the main species react according to the overall step 2H₂ + O₂-> 2H₂O; so that a one-step chemical-kinetic description, recently derived by asymptotic analysis for near-limit fuel-lean deflagrations, can be used with excellent accuracy to describe the whole branch of stable flame balls. Besides molecular diffusion in a binary-diffusion approximation, Soret diffusion is included, since this exerts a nonnegligible effect to extend the flammability range. When the large value of the activation energy of the overall reaction is taken into account, the leading-order analysis in the reaction-sheet approximation is seen to determine the flame ball radius as that required for radiant heat losses to remove enough of the heat released by chemical reaction at the flame to keep the flame temperature at a value close to crossover. The results are relevant to burning velocities at lean equivalent ratios and may influence fire-safety issues associated with hydrogen utilization.

Flammability conditions for ultra-lean hydrogen premixed combustion based on flame-ball analyses

It has been reasoned that the structures of strongly cellular flames in very lean mixtures approach an array of flame balls, each burning as if it were isolated, thereby indicating a connection between the critical conditions required for existence of steady flame balls and those necessary for occurrence of self-sustained premixed combustion. This is the starting assumption of the present study, in which structures of near-limit steady sphericosym-metrical flame balls are investigated with the objective of providing analytic expressions for critical combustion conditions in ultra-lean hydrogen-oxygen mixtures diluted with N2 and water vapor. If attention were restricted to planar premixed flames, then the lean-limit mole fraction of H2 would be found to be roughly ten percent, more than twice the observed flammability limits, thereby emphasizing the relevance of the flame-ball phenomena. Numerical integrations using detailed models for chemistry and radiation show that a onestep chemical-kinetic reduced mechanism based on steady-state assumptions for all chemical intermediates, together with a simple, optically thin approximation for water-vapor radiation, can be used to compute near-limit fuel-lean flame balls with excellent accuracy. The previously developed one-step reaction rate includes a crossover temperature that determines in the first approximation a chemical-kinetic lean limit below which combustión cannot occur, with critical conditions achieved when the diffusion-controlled radiation-free peak temperature, computed with account taken of hydrogen Soret diffusion, is equal to the crossover temperature. First-order corrections are found by activation-energy asymptotics in a solution that involves a near-field radiation-free zone surrounding a spherical flame sheet, together with a far-field radiation-conduction balance for the temperature profile. Different scalings are found depending on whether or not the surrounding atmosphere contains wáter vapor, leading to different analytic expressions for the critical conditions for flame-ball existence, which give results in very good agreement with those obtained by detailed numerical computations.

Electronic and optical properties of substitutional V, Cr and Ir impurities in Cu2ZnSnS4

The substitution of cation atoms by V, Cr and It in the natural and synthetic quaternary Cu2ZnSnS4 semiconductor is analyzed using first-principles methods. In most of the substitutions, the electronic structure of these modified CZTS is characterized for intermediate bands with different occupation and position within of the energy band gap. A study of the symmetry and composition of these intermediate bands is carried out for all substitutions. These bands permit additional photon absorption and emission channels depending on their occupation. The optical properties are obtained and analyzed. The absorption coefficients are split into contributions from the different absorption channels and from the inter- and intra-atomic components. The sub bandgap transitions are significant in many cases because the anion states contribute to the valence, conduction and intermediates bands. These properties could therefore be used for novel optoelectronic devices.

Trans arquitectura : imaginación, invención e individuación del objeto técnico arquitectónico : transferencia tecnológica desde la industria del transporte al proyecto arquitectónico (1900-1973)

Se presenta la tesis doctoral, titulada ‘TRANS Arquitectura. Imaginación, Invención e individuación del objeto tecnico arquitectónico. Transferencia tecnológica desde la Industria del Transporte al Proyecto de Arquitectura [1900-1973]'’, que aborda la relación entre la Arquitectura y el Objeto Técnico durante la Modernidad.1 La temática de la tesis gravita en torno a la cultura técnica, la cultura material y la historia de la Tecnología del siglo XX. Hipótesis Se sostiene aquí la existencia de unas arquitecturas que se definen como Objetos Técnicos. Para demostrarlo se estudia si éstas comparten las mismas propiedades ontológicas de los objetos técnicos. Industria y Arquitectura La historia de la Arquitectura Moderna es la historia de la Industria Moderna y sus instalaciones industriales, sus productos y artefactos o sus procedimientos y procesos productivos. Fábricas, talleres, acerías, astilleros, minas, refinerías, laboratorios, automóviles, veleros, aviones, dirigibles, transbordadores, estaciones espaciales, electrodomésticos, ordenadores personales, teléfonos móviles, motores, baterías, turbinas, aparejos, cascos, chassis, carrocerías, fuselajes, composites, materiales sintéticos, la cadena de montaje, la fabricación modular, la cadena de suministros, la ingeniería de procesos, la obsolescencia programada… Todos estos objetos técnicos evolucionan constantemente gracias al inconformismo de la imaginación humana, y como intermediarios que son, cambian nuestra manera de relacionarnos con el mundo. La Arquitectura, al igual que otros objetos técnicos, media entre el hombre y el mundo. Con el objetivo de reducir el ámbito tan vasto de la investigación, éste se ha filtrado a partir de varios parámetros y cualidades de la Industria, estableciendo un marco temporal, vinculado con un determinado modo de hacer, basado en la ciencia. El inicio del desarrollo industrial basado en el conocimiento científico se da desde la Segunda Revolución Industrial, por consenso en el último tercio del siglo XIX. Este marco centra el foco de la tesis en el proceso de industrialización experimentado por la Arquitectura desde entonces, y durante aproximadamente un siglo, recorriendo la Modernidad durante los 75 primeros años del siglo XX. Durante este tiempo, los arquitectos han realizado transferencias de imágenes, técnicas, procesos y materiales desde la Industria, que ha servido como fuente de conocimiento para la Arquitectura, y ha evolucionado como disciplina. Para poder abordar más razonablemente un periodo tan amplio, se ha elegido el sector industrial del transporte, que históricamente ha sido, no sólo fuente de inspiración para los Arquitectos, sino también fuente de transferencia tecnológica para la Arquitectura. Conjuntos técnicos como los astilleros, fábricas de automóviles o hangares de aviones, individuos técnicos como barcos, coches o aviones, y elementos técnicos como las estructuras que les dan forma y soporte, son todos ellos objetos técnicos que comparten propiedades con las arquitecturas que aquí se presentan. La puesta en marcha de la cadena móvil de montaje en 1913, se toma instrumentalmente como primer foco temporal desde el que relatar la evolución de numerosos objetos técnicos en la Primera Era de la Máquina; un segundo foco se sitúa en 19582, año de la creación de la Agencia Espacial norteamericana (NASA), que sirve de referencia para situar la Segunda Era de la Máquina. La mayoría de los objetos técnicos arquitectónicos utilizados para probar la hipótesis planteada, gravitan en torno a estas fechas, con un rango de más menos 25 años, con una clara intención de sincronizar el tiempo de la acción y el tiempo del pensamiento. Arquitectura y objeto técnico Los objetos técnicos han estado siempre relacionados con la Arquitectura. En el pasado, el mismo técnico que proyectaba y supervisaba una estructura, se ocupaba de inventar los ingenios y máquinas para llevarlas a cabo. Los maestros de obra, eran verdaderos ‘agentes de transferencia tecnológica’ de la Industria y su conocimiento relacionaba técnicas de fabricación de diferentes objetos técnicos. Brunelleschi inventó varia grúas para construir la cúpula de Santa Maria dei Fiori (ca.1461), seguramente inspirado por la reedición del tratado de Vitruvio, De Architectura (15 A.C.), cuyo último capítulo estaba dedicado a las máquinas de la arquitectura clásica romana, y citaba a inventores como Archimedes. El arquitecto florentino fue el primero en patentar un invento en 1421: una embarcación anfibia que serviría para transportar mármol de Carrara por el río Arno, para su obra en Florencia. J. Paxton. Crystal Palace. London 1851. Viga-columna. Robert McCormick. Cosechadora 1831. 2ª patente, 1845. La Segunda Revolución Industrial nos dejó un primitivo ejemplo moderno de la relación entre la Arquitectura y el objeto técnico. El mayor edificio industrializado hasta la fecha, el Crystal Palace de Londres, obra de Joseph Paxton, fue montado en Londres con motivo de la Gran Exposición sobre la Industria Mundial de 1851, y siempre estará asociado a la cosechadora McCormick, merecedora del Gran Premio del Jurado. De ambos objetos técnicos, podrían destacarse características similares, como su origen industrial, y ser el complejo resultado de un ensamblaje simple de elementos técnicos. Desde la entonces, el desarrollo tecnológico ha experimentado una aceleración continuada, dando lugar a una creciente especialización y separación del conocimiento sobre las técnicas antes naturalmente unidas. Este proceso se ha dado a expensas del conocimiento integrador y en detrimento de la promiscuidad entre la Industria y la Arquitectura. Este es, sin lugar a dudas, un signo consustancial a nuestro tiempo, que provoca un natural interés de los arquitectos y otros tecnólogos, por las transferencias, trans e inter-disciplinareidades que tratan de re-establecer los canales de relación entre los diferentes campos del conocimiento. La emergencia de objetos técnicos como los vehículos modernos a principios del siglo XX (el automóvil, el trasatlántico, el dirigible o el aeroplano) está relacionada directamente con la Arquitectura de la Primera Era de la Máquina. La fascinación de los arquitectos modernos por aquellas nuevas estructuras habitables, se ha mantenido durante más de un siglo, con diferente intensidad y prestando atención a unos objetos técnicos u otros, oscilando entre el dominio del valor simbólico de los vehículos como objetosimágenes, durante el periodo heroico de la Primera Era de la Máquina, y la mirada más inquisitiva durante la Segunda, que perseguía un conocimiento más profundo de la organización de los mismos y del sistema técnico en el que estaban incluidos. La relación homóloga que existe entre arquitecturas y vehículos, por su condición de estructuras habitables, es algo de sobra conocido desde que Le Corbusier utilizara aquellas imágenes de barcos, coches y aviones para ilustrar su manifiesto Vers une architecture, de 1923. Los vehículos modernos han sido los medios con los que transmitir los conceptos que ansiaban transformar las propiedades tradicionales de la Arquitectura, relativas a su factura, su habitabilidad, su duración, su funcionalidad o su estética. Destaca particularmente el caso del automóvil en las décadas de los años 30 y 50, y los vehículos del programa espacial en las décadas de los 60 y 70. El conocimiento y la documentación previa de estos hechos, fueron un buen indicio para identificar y confirmar que el sector industrial del transporte, era un especialmente trascendente y fértil proveedor de casos de transferencia tecnológica para la Arquitectura. La tradición Moderna inaugurada por Le Corbusier en los años 20, ha sido mantenida y defendida por una multitud de arquitectos modernos como Albert Frey, Richard Neutra, Ralph Soriano, Charles Eames o Craig Ellwood, cuyo trabajo, animado por el legado de anteriores tecnólogos como Bucky Fuller o Jean Prouvé, fue fundamental y referencia obligada para la siguiente generación de arquitectos como Cedric Price, Archigram, Norman Foster, Richard Rogers, Renzo Piano, Jean Kaplicky o Richard Horden, entre otros. Todos ellos han contribuido a engrosar el imaginario del objeto técnico, aportando sus obras arquitectónicas. Estos arquitectos que aparecen repetidamente en el discurrir de la tesis, pertenecen a un mismo linaje, y son agrupados según una estructura ‘genealógica’, que se ha denominado ‘Estirpe Técnica’. Unidos por intereses comunes y similares enfoques o actitudes ante el proyecto de arquitectura, entendida como objeto Técnico, han operado mediante la práctica de la transferencia tecnológica, sin limitarse a las técnicas compositivas propias de la disciplina arquitectónica. Durante la investigación, se ha recopilado una selección de menciones explícitas -hechas por arquitectos- sobre otros objetos técnicos para referirse a la Arquitectura, mostrando las constantes y las variaciones de sus intereses a lo largo del siglo, lo que nos ha llevado a conclusiones como por ejemplo, que los conjuntos técnicos (fábricas de zepelines, aviones, automóviles o trasatlánticos) eran tomados por los arquitectos de la primera Modernidad, como un modelo imaginario, formal y compositivo, mientras que los de la Segunda Era de la Máquina los tomaban como modelo espacial y organizativo para la arquitectura. La mencionada estirpe de tecnólogos incluye líneas de descendencia conocidas, como: EiffelSuchovBehrens GropiusMiesLeCorbusierLodsProuve, en la Europa continental, o una rama británica como: LoudonPaxtonWilliamsStirlingGowan SmithsonsPriceArchigramFosterRogersPiano KaplickyHorden. También podemos encontrar conexiones intercontinentales como Fuller EamesRudolphFosterRogers, o ramificaciones menos previsibles como: LeRicolaisKahn PianoKaplicky, o LeCorbusierFreyLacaton Vassal… Seguramente muchos más merecerían incluirse en esta lista, y de hecho, la tesis asume la imposibilidad de incluirlo todo (por motivos prácticos) aunque contempla la posibilidad de ser ampliada en un futuro. Con lo aquí incluido, se pretende mostrar la continuidad en los enfoques, planteamientos y técnicas de proyectos aplicadas, de los que podemos deducir algunas conclusiones, como por ejemplo, que en los periodos inmediatamente posteriores a las dos Guerras Mundiales, aumentó la intensidad de aportaciones de nuevas imágenes de vehículos, al imaginario del objeto técnico utilizado por los arquitectos, a través de publicaciones y exposiciones. Hoy, cien años después de que Ford pusiera en marcha la cadena móvil de montaje, aún encontramos viva esta tradición en las palabras de un arquitecto, Richard Horden, cuyo trabajo porta consigo –como la información embebida en los elementos técnicos- toda una cultura técnica de una tradición moderna. Horden representa uno de los exponentes de la que he denominado estirpe de tecnólogos. Es por ello que he querido concluir la tesis con una entrevista, realizada en Mayo de 2015, en su estudio de Berkeley Square en Londres (ver Apéndices). Guías Para el desarrollo de la presente tesis, se ha tomado, como principal obra de referencia, otra tesis, titulada El modo de existencia de los objetos técnicos, leída y publicada en 1958 por el filósofo francés Gilbert Simondon [1924-89], dedicada a la ontología del objeto técnico. Esta obra enmarca el enfoque intelectual de la tesis, que entronca con la fenomenología, para movilizar una visión particular de la Arquitectura, a la que sirve como modelo de análisis ontológico para estudiar sus procesos de génesis, invención e individuación. Para el desarrollo de éstos, se ha utilizado como complemento bibliográfico, otra obra del mismo autor, titulada Imaginación e invención 1965-66. En cuanto a las fuentes historiográficas disciplinares, se ha elegido utilizar a Reyner P. Banham [1922-1988] y a Martin E. Pawley [1938-2008] como guías a través de la arquitectura del siglo XX. Sus crónicas sobre la Primera y Segunda Era de la Máquina3 y su obra crítica, han servido como índices desde los que reconstruir el imaginario del objeto técnico moderno, y del que aprovisionarse de proyectos y obras de Arquitectura como casos de estudio para la tesis. Estas obras han servido además como índices de otra bibliografía, que ha sido complementaria a la de éstos. Objetivos de la Tesis El principal objetivo de la tesis es demostrar la hipótesis: si una obra de arquitectura puede ser considerada un objeto técnico y bajo qué condiciones, construyendo un criterio que permita reconocer cuándo una obra de Arquitectura responde a la definición de objeto técnico. Otro objetivo es demostrar la importancia y potencia de la Transferencia tecnológica en el proceso evolutivo de la Arquitectura, y para ello se presentan ejemplos de una metodología de proyecto por ensamblaje, que Martin Pawley denominaba ‘Design by Assembly’. También es un objetivo el de reconstruir un Atlas del Imaginario del objeto técnico moderno, con el fin de conocer mejor las causas, razones y finalidades que llevaron a los arquitectos modernos a perseguir una arquitectura como objeto técnico. Este Atlas permite relacionar panópticamente los distintos objetos técnicos entre sí, revelando la verdadera importancia y trascendencia de aquéllos y las arquitecturas con las que se relacionan. En él, las arquitecturas vuelven a situarse en el contexto más extenso y complejo de la industria y la historia de la tecnología, al que siempre pertenecieron. De este modo, éstas son capaces de desvelar todo el conocimiento -en forma de información- que portan en su propio código ‘genético’, desplegando capítulos completos de cultura tecnológica, tan antigua como la Humanidad y en constante y creciente evolución. Estructura de la tesis Tras una Introducción en la que se presentan algunos de los conceptos principales que se instrumentalizan en la tesis sobre la ontología Simondoniana del objeto técnico y sobre la transferencia tecnológica aplicada al proyecto de Arquitectura, el texto principal de la tesis consta de tres partes: La primera se dedica a la Imaginación, una segunda parte a la Invención y una tercera a Individuación o evolución del objeto técnico. Se termina con una Discusión de la tesis y un apartado de Conclusiones. En la Introducción al objeto técnico, éste se define ontológicamente y se distinguen sus diferentes categorías (conjuntos técnicos, individuos técnicos y elementos técnicos). Se explica el proceso de génesis del objeto técnico y sus fases de imaginación, invención e individuación. También se presentan los conceptos de transducción, tecnicidad y sistema técnico, fundamentales para entender el concepto de transferencia tecnológica que se desarrollará después. La concretización, explica el modo particular de individuación y evolución de los objetos técnicos, un proceso por el que las diferentes partes de un objeto técnico, se integran y tienden hacia la propia convergencia. Aquí se comprueba la efectividad del concepto simondoniano de Transducción, como señal o información transmitida y transformada, y se relaciona con la Transferencia Tecnológica - un proceso sinergético, por el que un sector industrial se beneficia del desarrollo de otro sector- a la que se han referido explícitamente arquitectos e historiadores para explicar sus obras, durante la Segunda Era de la Máquina, y que es determinante para el desarrollo de la Industria. La transferencia tecnológica sería la transmisión del conjunto de conocimientos sobre la técnica, que incluyen su esfera fáctica, pero también la esfera sensible de la experiencia. En su aplicación a la arquitectura, las transferencias se han clasificado según tres tipos: Eidéticas, Tectónicas, Orgánicas. En la primera parte dedicada a la Imaginación del objeto técnico arquitectónico se realiza una reconstrucción ‘arqueológica’ –y parcial- del imaginario del objeto técnico moderno, con la intención de conocer mejor su génesis y la relación con otros objetos técnicos. Las fuentes de ese imaginario se buscan en las instalaciones de la Industria de principios de siglo XX, en particular en las fábricas de vehículos, con la finalidad de comprobar hasta qué punto, esos objetos técnicos fueron importantes para imaginar la Arquitectura moderna. La reconstrucción se continúa hasta la Segunda Era de la Máquina, cuando una nueva mirada más inquisitiva y precisa, se dirige a otras fábricas, vehículos y componentes, interesándose por sus cualidades materiales y organizativas. Transferencias Eidéticas, que operan desde un conocimiento intuitivo y son útiles para transmitir información sobre la esencia de un objeto técnico que sirve de fuente. Conceptos abstractos se transmiten por medio de las imágenes—objeto, para producir una transformación en su equivalente arquitectónico. Fruto de la investigación, se han detectado un grupo de conceptos que han sido objeto de transferencias tecnológicas de naturaleza eidética, provenientes del imaginario del objeto técnico moderno: FABRICADO, HABITABLE, FUNCIONAL, EFICIENTE, OBSOLESCENTE y BELLO. En la segunda parte dedicada a la Invención del objeto técnico arquitectónico, las transferencias también pueden ser Tectónicas, cuando lo que se transmite es una técnica constructiva o estructural aplicada mediante MATERIALES artificiales (como los metales, los composites como el ferrocemento, y el plywood, o las aleaciones como el aluminio) o mediante el ensamblaje de ESTRUCTURAS o partes componentes de otro objeto técnico, (como cascos, fuselajes, carrocerías o aparejos) y tiene como resultado la invención de un nuevo objeto técnico arquitectónico. En la tercera parte dedicada a la individuación, se abordan las transferencias ORGÁNICAS, lo que se transfiere es una técnica organizativa, aplicada a través de PROCEDIMIENTOS que definen la actividad del arquitecto como tecnólogo e inventor de objetos técnicos. Estos procedimientos tienen un efecto transformador en tres instituciones tradicionales para la Arquitectura: la Escuela, el Estudio y la Obra, y sus resultados se resumen en nuevos modelos de organización de la Educación de la Arquitectura, con la aparición de los Talleres de proyectos; nuevos modelos de organización del ejercicio de arquitecto: la Oficina técnica; nuevos modelos de organización del espacio, basados en la organización espacial de la Industria, que da lugar a patrones o Matrices espaciales; un nuevo modelo de organización del proyecto, que utiliza las herramientas gráficas de la industria y el ensamblaje como metodología; y un nuevo modelo de producción arquitectónica, basado en la Industrialización. Tras explicar los conceptos y la génesis del ensamblaje y el montaje, se presenta el proyecto por ensamblaje (Design by assembly) como un método que promueve la invención arquitectónica. Se demuestra utilizando algunos casos analizados en la tesis, en los que se ha realizado alguna transferencia conceptual, constructiva u organizativa. Tras analizar las arquitecturas estudiadas en la tesis, se ha utilizado el método genético propuesto por Simondon para comprender cada evolución particular, reconstruyendo las líneas genealógicas hasta sus ancestros, e identificando una serie de linajes genéticos, que corresponderían con los conjuntos técnicos estudiados en la tesis: el astillero, la fábrica de coches, y la fábrica de aeronaves: los Ancestros de la Modernidad. Los sistemas de organización espacial de estos conjuntos técnicos, están directamente relacionados con el objeto técnico que se produce en él. A partir de ellos se definen una serie de matrices operativas (MILL, SHOP, SHED), que sirven para hacer una taxonomía del objeto técnico arquitectónico. Esto se ejemplifica con algunos proyectos de Norman Foster, Richard Rogers, Renzo Piano, Nicholas Grimshaw, Jean Kaplicky y Richard Horden. Tesis: Comprobación de la hipótesis Simondon definía ontológicamente el Objeto técnico como aquello de lo que existe génesis y que desarrolla una tendencia hacia la solidaridad y unidad. Para que una Arquitectura pueda ser reconocida como un Objeto técnico, se deben dar una serie de condiciones, en las sucesivas fases que intervienen en su modo de existencia: Imaginación. Estas arquitecturas remiten a un imaginario protagonizado por imágenes-objeto de otros objetos técnicos (conjuntos técnicos, individuos técnicos y elementos técnicos). Esas imágenes-objeto vehiculizan una transferencia eidética de los objetos técnicos que simbolizan. Invención. Estas arquitecturas son el resultado de transferencias tectónicas, que se producen durante el proceso de proyecto, mediante el ensamblaje de materiales, componentes o procedimientos, utilizados en la industria para la producción de otros objetos técnicos. Individuación. Estas arquitecturas evolucionan y se individualizan por concretización, un proceso por el que los objetos técnicos se organizan para seguir su tendencia hacia la integración de sus partes, con el fin de alcanzar la convergencia de funciones en una única estructura. Esta integración tiende hacia la naturalización del objeto técnico, mediante la inclusión simbiótica de sus medios naturales asociados. En este caso, veremos cómo se ha producido transferencias orgánicas, o lo que es lo mismo, cómo los objetos técnicos –en el nivel de los conjuntos técnicos- se han tomado como modelo de organización por la arquitectura. Tras comprobar que de ellas existe una génesis, que evoluciona por las fases de imaginación e invención y concretización, se analiza su imaginario, su materialidad, sus estructuras y su organización, con el fin de detectar patrones y principios organizativos comunes a otros objetos técnicos. Interés de la tesis Desde el comienzo del nuevo siglo, diversos autores han demostrado un renovado interés por definir qué es el proyecto, qué lo constituye para qué sirve. Las aproximaciones al tema provienen de la filosofía analítica (Galle, 2008) o de la filosofía de la tecnología (Verbeek, 2005; Vermaas, 2009) y a menudo versan sobre la relación entre diseño y la cultura material (Dorschel 2003, Boradkar 2010 o Preston 2012). Es importante indicar el reciente y también creciente interés suscitado por la obra del filósofo francés, Gilbert Simondon [1924-1989], reconocida por su importante contribución a la filosofía de la técnica y la fenomenología, y por la influencia en el pensamiento de filósofos como Gilles Deleuze, autor presente en multitud de tesis doctorales e investigaciones teóricas llevadas a cabo en las principales escuelas de Arquitectura de todo el mundo desde los años 90 hasta el presente. La reedición y traducción de la obra de Simondon (ing. 1980, esp. 2008) ha recibido la atención de filósofos actuales como Paolo Virno, Bruno Latour o Bernard Stiegler, que siguen recurriendo a su estudio y análisis para avanzar en su pensamiento, estando por tanto presente en el debate contemporáneo sobre la técnica. Tras su reciente traducción al español, el pensamiento de Simondon ha despertado un gran interés en América Latina, como demuestra la organización de varios congresos y simposios, así como la proliferación de publicaciones en torno a su obra y pensamiento. Las futuras traducciones del resto de sus principales obras, asegurarán una introducción cada vez mayor en la comunidad académica. Se ha procurado presentar una mirada alternativa de la Historia de la Arquitectura Moderna, utilizando como guía a un cronista como Reyner Banham. La Era de la Máquina se ha cruzado con la Mecanología y el “vitalismo técnico” de Simondon, obteniendo como resultado una interpretación fresca, renovada y optimista de algunas de las más importantes obras de Arquitectura del siglo XX, que seguro contribuirán al desarrollo de la del siglo XXI, inmerso ya en el cambio de paradigma hacia la sostenibilidad y la ecología. ABSTRACT 'TRANS architecture. Imagination, invention and technical individuation of the architectural technical object. Technology transfer from the Transport Industry to Architectural Design [1900- 1973]' is a thesis dealing with the relationship between Architecture and the Technical Object during Modernity5. The theme of the thesis revolves around the technical culture, material culture and the history of twentieth-century technology. Hypothesis Held here is the existence of some architectures defined as technical objects. A study has been developed to prove if those architectures share the ontological properties of a technical object. Industry and Architecture The history of Modern Architecture is also the history of modern industry and its facilities, its products and devices, its procedures and production processes. Factories, workshops, steel mills, shipyards, mines, refineries, laboratories, cars, yachts, airplanes, airships, shuttles, space stations, home appliances, personal computers, mobile phones, motors, batteries, turbines, rigs, hulls, chassis, bodies, fuselages , composites and synthetic materials, the assembly line, modular manufacturing, the supply chain, process engineering, the planned obsolescence ... All these technical objects are constantly evolving thanks to the inconsistency of the human imagination and, as our intermediates, keep changing our way of relating and being in the world. Architecture, alike other technical objects, mediates between man and the World. In order to frame the vast field of the research, it has been filtered according to various parameters and qualities of Industry, establishing also a time frame which is related to a particular science-based way of making. The start of an industrial development, based on scientific knowledge is given from the Second Industrial Revolution -by consensus on the last third of the nineteenth century. This frame puts the focus of the thesis in the process of industrialization experienced by the Architecture of at least one century, and tours through Modernity during the first 75 years of the twenieth century. During this time, architects have made transfers of images, techniques, processes and materials from Industry, serving as a source of knowledge and thus allowing Architecture to evolve as a discipline. To reasonably address the enormous scope of the thesis, the industrial sector of transportation has ben chosen. It is not only a historical source of inspiration for architects, but also a traditional source of technology transfer for Modern Architecture. Technical sets such as shipyards, automobile factories or aircraft hangars, technical individuals as boats, cars or planes, and technical elements like the structures shaping and supporting them, are all technical objects which share properties with the architectures here presented. The launch of the moving assembly line in 1913, is instrumentally taken as a first time focus, from which to describe the evolution of many technical objects in the First Machine Age; a second focus could be found in 19586, year of the creation of the North American Space Agency (NASA), serving as a reference to the Second Machine Age. Most architectural technical objects used to test the hypothesis, gravitate around this second focus, in a range of plus or minus 25 years, with a clear intention to synchronize the time for action and time of thought. Architecture and Technical Object Technical objects have always been related to Architecture. In the past, the same technician who planned and oversaw a building structure, invented the devices and machines to carry them out. The foremen were the true 'technology transfer agents' from Industry. Their knowledge naturally related different manufacturing techniques to make diverse technical objects. Brunelleschi invented various cranes to build the dome of Santa Maria dei Fiori in Florence (ca.1461). Probably inspired by the reedition of Vitruvius’ treaty De Architectura (15 BC), whose last chapter was dedicated to the machines of classical Roman architecture and quoted inventors as Archimedes, the florentine architect was the first to patent an invention in 1421: an amphibious craft serving as a means of transportation for Carrara marble along the Arno river. At the daw of the Second Industrial Revolution, whose development was based on the scientific knowledge, we find a primitive modern example of the relationship between Architecture and a Technical Object: The Crystal Palace, built in London for the Great Exhibition of 1851 World Industry and designed by Joseph Paxton, was the largest to date industrialized building, and it will be always associated with the McCormick Reaper, worthy of the Grand Jury’s Prize. Similar characteristics could be emphasized of both technical objects, such as their industrial origin and for being be the complex result of a simple assembly of technical elements. Since then, technological development has experienced a continued acceleration, resulting in an increasing specialization and separation of knowledge about techniques which were naturally attached in the past. This process has happened at the expense of an integrative knowledge and against promiscuity between Industry and Architecture. This is, undoubtedly, an inherent sign of our time, which causes the natural and interest of architects and other technicians about transfers, trans-disciplinarity and inter-disciplinarity, as a reaction to reestablish channels of relationships between these different fields of knowledge. The emergence of technical objects as modern vehicles in the early twentieth century (the car, the Ocean liner, the airship or the airplane) is directly related to the Architecture of the First Machine Age. Modern architects’ fascination for those new ‘inhabitable’ structures has been maintained for over a century, with different intensity and paying attention to one and other technical objets, ranging from the domain of the symbolic value of the vehicles as objectsimages, during heroic period of the First Machine Age, to the more inquisitive glance characterizing the Second Machine Age, which sought a deeper understanding of the organization of such objects and the technical system to which they belonged. The periods immediately following both World Wars, showed a concentrated effort to bring new images of vehicles to the imaginary of architects, by means of publications and exhibitions. The homologous relationship between architectures and vehicles, in their capacity as living structures, is something well known since Le Corbusier used the images of cars, boats and airplanes to illustrate his manifesto, Towards an architecture in 1923. Modern vehicles have been the means by which to convey the concepts eager to transform the traditional attributes of Architecture: those relating to its manufacture, habitability, duration, functionality or aesthetics. The automobile stands out during the 30s and 50s, and the new vehicles of the Space Program satnd in the 60s and 70s. The prior knowledge and documentation of these events were a good indication to identify the industrial sector of Transportation as one of especial importance and as a fertile provider of technology transfer cases for Architecture. The Modern tradition, inaugurated by Le Corbusier in the 20s, has been maintained and defended by a host of modern architects like Albert Frey, Richard Neutra, Ralph Soriano, Charles Eames and Craig Ellwood, whose work - inspired by the legacy of previous technologists as Bucky Fuller or Jean Prouvé- was fundamental and a mandatory reference for the next generation of architects like Cedric Price, Archigram, Norman Foster, Richard Rogers, Renzo Piano, Jean and Richard Horden Kaplicky, among others. They have all contributed to increase the imaginary of the technical object, adding to it their architectural works. In the passage of the thesis, we repeatedly find a number of architects, who have been grouped according to a 'genealogical' structure, which has been called 'Technical Lineage'. Gathered by common interests and similar views or attitudes to the architectural design, understood as a technical object, they have operated through the practice of technology transfer, without limiting itself to specific compositional techniques of the architectural discipline. During the investigation, a selection of explicit references made by those architects, about other technical objects referring to their Architecture, has been compiled, showing constants and variations in their interests throughout the century, which has led to conclusions such as, having technicians sets (zeppelins factories, airships factories, car factories and shipyards) been taken by the architects of the first Modernity, as their main formal, compositional and imaginary models, while the Second Machine Age had taken them as a spatial and organizational model for their architecture. The above mentioned lineage of technologists includes weel-known ‘seed lines’ as: Eiffel- Suchov-Behrens, Gropius-Mies-LeCorbusier- Lods-Prouve, in continental Europe; British branches as Loudon-Paxton-Williams-Stirling- Gowan-Smithsons-Price-Archigram-Foster- Rogers-Piano-Kaplicky-Horden. And we could also find intercontinental connections as Fuller- Eames-Rudolph-Foster-Rogers, or other less predictable ramifications as LeRicolais-Kahn Piano-Kaplicky, or LeCorbusier-Frey-Lacaton & Vassal... Many more would surely deserve to be included in this list, and indeed, the thesis assumes the impossibility of including them all (for practical reasons) and even contemplates possible future extensions. The material included herein is to demonstrate the continuity in the approaches, statements and in the applied architectural design techniques, from which we can draw some conclusions. Today, one hundred years after Ford put up the moving assembly line, we still find this tradition alive in the words of the architect Richard Horden, whose work carries with it –as with the information embedded in every technical element- the whole techncial culture of a modern tradition. Horden is represented here as one of the exponents of what I have called the lineage of technologists. That is why I wanted to conclude the thesis with an interview to Richard Horden, held in May 2015 in his studio in London's Berkeley Square (see Appendices). Guides For the development of this thesis, another thesis, entitled: The mode of existence of technical objects, is taken as the main reference work. Read and published in 1958 by the French philosopher Gilbert Simondon [1924- 1989], it was dedicated to the ontology of the technical object. This work frames the intellectual approach of the thesis, which connects with phenomenology to mobilize a particular vision of Architecture. It is used as a model of ontological analysis to study its genesis, invention and evolutionary processes. To develop these, another work by the same author, titled Imagination and Invention (1965- 1966) has been used as a bibliographical complement. As for the disciplinary historical sources, Reyner P. Banham [1922-1988] and Martin E. Pawley [1938-2008] have been chosen as guides through the modern Architecture of the twentieth century. Their cronical reports on the First and Second Machine Age and their critical works have served as an index from which to reconstruct the imaginary of the modern technical object in the Machine Age7, and to stock up on projects and works of architecture, used as case studies for the thesis. These works have also been used as triggers for other literatures, which has been complementary to the former. Objectives of the Thesis The main objective of the thesis is to prove its hypothesis: if a work of architecture can be considered a technical object and under what conditions, building then a criterion for recognizing when a work of architecture meets the definition of a technical object. Another aim is to demonstrate the importance and power of Technology Transfer in the evolutionary process of Architecture, and to do it, some examples of a methodology for architectural design that Martin Pawley called 'Design by Assembly' are presented. It is also an objective to reconstruct an Atlas of the imaginary of the modern technical object, in order to better understand the causes, reasons and purposes that led modern architects to pursue architecture as a technical object. This Atlas allows to panoptically relate the various technical objects, revealing the true importance and significance of those and the architecture with whom they interact. Architectures are again at the largest and most complex industrial context and the history of technology, which always belonged. Thus, they are able to reveal all the knowledge-in the shape of information-carried in their own 'genetic' code, displaying full chapters of technological culture as old as mankind and constantly growing and evolving. Thesis: Proving the Hypothesis Simondon ontologically defined the technical object as ‘that of which genesis exists’ and that develops ‘a tendency towards solidarity and unity’. For an architecture to be recognized as a technical object, a number of conditions should be given, in the successive phases involved in their mode of existence: Imagination. These architectures refer to an imaginary featuring images-object other technical objects (technical sets, technical individuals and technical elements). These images are the means to an eidetic transfer of the technical objects which they symbolize. Invention. These architectures are the result of tectonic transfers, which occur during the architectural design process, by assembling materials, components or procedures used in industry for the production of other technical objects. Individuation. These architectures evolve and are individualized by ‘concretization’, a process leading to the full integration of its parts and aiming the full convergence of its functions into a single structure. This integration tends towards the naturalization of the technical object, by means of a symbiotic incorporation of their associated milieus. After checking if there is a genesis of them, which evolves through the phases of imagination and invention and concretization, their imaginary, materiality, structure and organization are analyzed in order to detect patterns and common organizational principles to other technical objects counterparts. Structure The main text of the thesis consists of three parts. Before there is an Introduction to the main concepts that are exploited in the thesis on ontology Simondonian technical object, and technology transfer applied to Architecture. Then a first part covers the Imaginary of the modern technical object, a second part is dedicated to the Invention and a third part to the individuation process The thesis ends with a section for the Discussion and the Conclusions. The Introduction to the technical object, this is ontologically defined and its different categories are distinguished. The process of genesis of the technical object and the phases of imagination, invention and indivuation are explained. Concepts as Transduction, Technicality and Technical system are presented for being fundamental to understand the concept of Technology Transfer that will take place later. The concretization is explained as the particular mode of individuation and evolution of technical objects, a process by which the different parts of a technical object, are integrated and begin a tendency towards a convergence in itself. The first part, dedicated to the Imagination of the architectural technical object presents a parcial "archaeological" reconstruction the imaginary of the modern technical object, intended to better understand its genesis and the relationship with other technical objects. The imaginary sources are searched in the premises of the Industry of the early twentieth century, and particularly in the factories of modern vehicles, in order to see, to what extent these technical objects were important to imagine modern architecture. The reconstruction is continued until the Second Machine Age, when a new, more inquisitive and precise gaze turns to other factories, other vehicles and other components and materials, inquiring now about their organizational qualities. The second part is devoted to the Invention of the architectural technical object. The effectiveness of the simondonian concept of Transduction is checked: a transmitted and transformed sign or information, which relates to Technology Transfer, a synergetic process by which an industrial sector benefits from the development of another sector, to which some architects and historians have explicitly referred to explain their works during Machine Age, and which is crucial for the development of the industry. Technology transfer would be the transmission of a set of information or knowledge about technique, including the factual sphere of technique, but also the sensitive sphere of experience. In their application to Architecture, these transfers have been classified according to three types: Eidetic, Tectonic and Organic. Eidetic Transfers operate from an intuitive knowledge and are useful for transmitting information about the essence of the technical object serving as a source. Abstract concepts are transmitted through the object-images to produce an equivalent transformation in Architecture. A group of concepts that have been the subject of technology transfers of eidetic nature, and have been originated in the imaginary of the modern technical object, have been detected as a result of the research: FABRICATED, INHABITABLE, FUNCTIONAL, EFFICIENT, OBSOLESCENT, and BEAUTIFUL. The transfers can also be Tectonic when, that which is transferred is a constructive or structural technique, applied through artificial MATERIALS such as metals, composites as the ferrocement, or plywood, or alloys such as aluminum; or by means of the assembly of STRUCTURES or parts of other technical objects such as hulls, fuselages, car bodies or rigs, resulting in the invention of a new architectural technical object. In the case of ORGANIC transfers, what is transferred is an organizational technique, applied by means of a set of PROCEDURES defining the activity of the architect as a technologist and inventor of technical objects. These procedures have a transformative effect on three traditional institutions for Architecture: the School, the Atelier and the Work, and the results are summarized in new models of organization of the Education of Architecture, with the onset of the Architectural Design Studios or workshops; new models of organization of the practice of architect: the technical office; and new models of space organization, based on the spatial organization of the industry, resulting in spatial patterns or spatial matrices; a new model of organization of the project, which uses graphical tools and industrail protocols as the assembly as a methodology; a new model of architectural production based on the industrialization. After explaining the concepts and the genesis of assembly and montage, Design by assembly is presented as a method that promotes architectural invention, and is shown using some case studies analyzed in the thesis, in which there has been made some conceptual, constructive or organizational transfer. After analyzing the architectures studied in the thesis, genetic method proposed by Simondon was used to understand every particular evolution, reconstructing their genealogical lines up to their ancestors, identifying a series of genetic lineages, which correspond to the technical sets studied in the thesis : the shipyard, the car factory, and aircraft factory. The real ancestors of Modernity. The spatial organization systems of these technical sets are directly related to the technical object that is fabricated within them. From that point, a number of operational matrices are defined (MILL, SHOP, SHED) and used to make a taxonomy of the architectural technical object. This is exemplified by some projects by architects as Norman Foster, Richard Rogers, Renzo Piano, Nicholas Grimshaw, Jean and Richard Horden Kaplicky. Interest of the thesis Since the beginning of the new century, several authors have shown a renewed interest in defining what a project is, how it is constituted and what it is for. The approaches to the subject are brought from analytic philosophy (Galle, 2008) or from the philosophy of technology (Verbeek, 2005; Vermaas, 2009) and they often speak about the relationship between design and material culture (Dorschel 2003, 2010 or Preston Boradkar 2012). It is also important to note the recent and growing interest in the work of French philosopher Gilbert Simondon [1924-1989], mainly known for its important contribution to the philosophy of technology and phenomenology of the technical object, and the influence on the thinking of contemporary philosophers as Paolo Virno, Bruno Latour or Gilles Deleuze, being the latter a author present in many doctoral theses and theoretical research conducted at major architecture schools around the world since the 90s to the present. The republication and translation of the work of Simondon (eng. 1980, spn. 2008) has received the attention from current philosophers such as Bernard Stiegler who continues to use its study and analysis to advance his thinking, thus being present in the contemporary debate about the technique. After its recent translation into Spanish, the thought of Simondon has aroused great interest in Latin America, as evidenced by the organization of various conferences and symposia, as well as the proliferation of publications about his work and thought8. Future translations of the rest of his major works, will ensure increased introduction in the academic community. Efforts have been made to present an alternative view of the History of Modern Architecture, using a reporter as Reyner P.Banham as a guide. The Machine Age intersects Simondon’s mechanology and his "technical vitalism", resulting in a fresh, renewed and optimistic interpretation of some of the most important works of Architecture of the twentieth century, which will surely contribute to the development of this century’s Architecture, already immersed in the paradigm shift towards sustainability and ecology.

Uncoupling of transfer of the presequence and unfolding of the mature domain in precursor translocation across the mitochondrial outer membrane

Translocation of mitochondrial precursor proteins across the mitochondrial outer membrane is facilitated by the translocase of the outer membrane (TOM) complex. By using site-specific photocrosslinking, we have mapped interactions between TOM proteins and a mitochondrial precursor protein arrested at two distinct stages, stage A (accumulated at 0°C) and stage B (accumulated at 30°C), in the translocation across the outer membrane at high resolution not achieved previously. Although the stage A and stage B intermediates were assigned previously to the forms bound to the cis site and the trans site of the TOM complex, respectively, the results of crosslinking indicate that the presequence of the intermediates at both stage A and stage B is already on the trans side of the outer membrane. The mature domain is unfolded and bound to Tom40 at stage B whereas it remains folded at stage A. After dissociation from the TOM complex, translocation of the stage B intermediate, but not of the stage A intermediate, across the inner membrane was promoted by the intermembrane-space domain of Tom22. We propose a new model for protein translocation across the outer membrane, where translocation of the presequence and unfolding of the mature domain are not necessarily coupled.

Role of a critical water in scytalone dehydratase-catalyzed reaction

Scytalone dehydratase (EC 4.2.1.94) catalyzes the dehydration of two important intermediates in the biosynthesis of melanin, and it functions without metal ions or any cofactors. Using molecular orbital theory, we have examined the role of a critical water molecule in the mechanism of scytalone dehydratase. The water, together with an internal hydrogen bonding, contributes significantly to the stabilization of the transition state (or the enolate intermediate). The role of two active site tyrosines (Tyr-50 and Tyr-30) is (i) to hold the critical water in place so that it may stabilize the transition state without much structural rearrangement during the catalytic reaction, and (ii) to polarize the water, making it a better general acid. The stereochemistry of the scytalone dehydratase-catalyzed dehydration is also discussed.

Mass spectrometric and capillary electrophoretic investigation of the enzymatic degradation of heparin-like glycosaminoglycans

Difficulties in determining composition and sequence of glycosaminoglycans, such as those related to heparin, have limited the investigation of these biologically important molecules. Here, we report methodology, based on matrix-assisted laser desorption ionization MS and capillary electrophoresis, to follow the time course of the enzymatic degradation of heparin-like glycosaminoglycans through the intermediate stages to the end products. MS allows the determination of the molecular weights of the sulfated carbohydrate intermediates and their approximate relative abundances at different time points of the experiment. Capillary electrophoresis subsequently is used to follow more accurately the abundance of the components and also to measure sulfated disaccharides for which MS is not well applicable. For those substrates that produce identical or isomeric intermediates, the reducing end of the carbohydrate chain was converted to the semicarbazone. This conversion increases the molecular weight of all products retaining the reducing terminus by the “mass tag” (in this case 56 Da) and thus distinguishes them from other products. A few picomoles of heparin-derived, sulfated hexa- to decasaccharides of known structure were subjected to heparinase I digestion and analyzed. The results indicate that the enzyme acts primarily exolytically and in a processive mode. The methodology described should be equally useful for other enzymes, including those modified by site-directed mutagenesis, and may lead to the development of an approach to the sequencing of complex glycosaminoglycans.

The role of enzyme distortion in the single displacement mechanism of family 19 chitinases

By using molecular dynamics simulations, we have examined the binding of a hexaNAG substrate and two potential hydrolysis intermediates (an oxazoline ion and an oxocarbenium ion) to a family 19 barley chitinase. We find the hexaNAG substrate binds with all sugars in a chair conformation, unlike the family 18 chitinase which causes substrate distortion. Glu 67 is in a position to protonate the anomeric oxygen linking sugar residues D and E whereas Asn 199 serves to hydrogen bond with the C2′ N-acetyl group of sugar D, thus preventing the formation of an oxazoline ion intermediate. In addition, Glu 89 is part of a flexible loop region allowing a conformational change to occur within the active site to bring the oxocarbenium ion intermediate and Glu 89 closer by 4–5 Å. A hydrolysis product with inversion of the anomeric configuration occurs because of nucleophilic attack by a water molecule that is coordinated by Glu 89 and Ser 120. Issues important for the design of inhibitors specific to family 19 chitinases over family 18 chitinases also are discussed.

Purification and characterization of sortase, the transpeptidase that cleaves surface proteins of Staphylococcus aureus at the LPXTG motif

Surface proteins of Staphylococcus aureus are linked to the bacterial cell wall by sortase, an enzyme that cleaves polypeptides at the threonine of the LPXTG motif. Surface proteins can be released from staphylococci by treatment with hydroxylamine, resulting in the formation of threonine hydroxamate. Staphylococcal extracts, as well as purified sortase, catalyze the hydroxylaminolysis of peptides bearing an LPXTG motif, a reaction that can be inhibited with sulfhydryl-modifying reagents. Replacement of the single conserved cysteine at position 184 of sortase with alanine abolishes enzyme activity. Thus, sortase appears to catalyze surface-protein anchoring by means of a transpeptidation reaction that captures cleaved polypeptides as thioester enzyme intermediates.

A role for TFIIH in controlling the activity of early RNA polymerase II elongation complexes

TFIIH is a multifunctional RNA polymerase II transcription factor that possesses DNA-dependent ATPase, DNA helicase, and protein kinase activities. Previous studies have established that TFIIH enters the preinitiation complex and fulfills a critical role in initiation by catalyzing ATP-dependent formation of the open complex prior to synthesis of the first phosphodiester bond of nascent transcripts. In this report, we present direct evidence that TFIIH also controls RNA polymerase II activity at a postinitiation stage of transcription, by preventing premature arrest by very early elongation complexes just prior to their transition to stably elongating complexes. Unexpectedly, we observe that TFIIH is capable of entering the transcription cycle not only during assembly of the preinitiation complex but also after initiation and synthesis of as many as four to six phosphodiester bonds. These findings shed new light on the role of TFIIH in initiation and promoter escape and reveal an unanticipated flexibility in the ability of TFIIH to interact with RNA polymerase II transcription intermediates prior to, during, and immediately after initiation.

Chromophore structural changes in rhodopsin from nanoseconds to microseconds following pigment photolysis

Rhodopsin is a prototypical G protein-coupled receptor that is activated by photoisomerization of its 11-cis-retinal chromophore. Mutant forms of rhodopsin were prepared in which the carboxylic acid counterion was moved relative to the positively charged chromophore Schiff base. Nanosecond time-resolved laser photolysis measurements of wild-type recombinant rhodopsin and two mutant pigments then were used to determine reaction schemes and spectra of their early photolysis intermediates. These results, together with linear dichroism data, yielded detailed structural information concerning chromophore movements during the first microsecond after photolysis. These chromophore structural changes provide a basis for understanding the relative movement of rhodopsin’s transmembrane helices 3 and 6 required for activation of rhodopsin. Thus, early structural changes following isomerization of retinal are linked to the activation of this G protein-coupled receptor. Such rapid structural changes lie at the heart of the pharmacologically important signal transduction mechanisms in a large variety of receptors, which use extrinsic activators, but are impossible to study in receptors using diffusible agonist ligands.