Control of dc capacitor voltages in diode-clamped multilevel inverter using bidirectional buck-boost choppers

The dc capacitors voltage unbalancing is the main technical drawback of a diode-clamped multilevel inverter (DCMLI), with more than three levels. A voltage-balancing circuit based on buck–boost chopper connected to the dc link of DCMLI is a reliable and robust solution to this problem. This study presents four different schemes for controlling the chopper circuit to achieve the capacitor voltages equalisation. These can be broadly categorised as single-pulse, multi-pulse and hysteresis band current control schemes. The single-pulse scheme does not involve faster switching actions but need the chopper devices to be rated for higher current. The chopper devices current rating can be kept limited by using the multi-pulse scheme but it involves faster switching actions and slower response. The hysteresis band current control scheme offers faster dynamics, lower current rating of the chopper devices and can nullify the initial voltage imbalance as well. However, it involves much faster switching actions which may not be feasible for some of its applications. Therefore depending on the system requirements and ratings, one of these schemes may be used. The performance and validity of the proposed schemes are confirmed through both simulation and experimental investigations on a prototype five-level diode-clamped inverter.

Developing a sustainability impact assessment framework for local urban planning

In order to meet the land use and infrastructure needs of the community with the additional challenges posed by climate change and a global recession, it is essential that Queensland local governments test their proposed integrated land use and infrastructure plans to ensure the maximum achievement of triple-bottom line sus-tainability goals. Extensive regulatory impact assessment systems are in place at the Australian and state government levels to substantiate and test policy and legislative proposals, however no such requirement has been extended to the local government level. This paper contends that with the devolution of responsibility to local government and growing impacts of local government planning and development assessment activities, impact assessment of regulatory planning instruments is appropriate and overdue. This is particularly so in the Queensland context where local governments manage metropolitan and regional scale responsibilities and their planning schemes under the Sustainable Planning Act 2009 integrate land use and infrastructure planning to direct development rights, the spatial allocation of land, and infrastructure investment. It is critical that urban planners have access to fit-for-purpose impact assessment frameworks which support this challenging task and address the important relationship between local planning and sustainable urban development. This paper uses two examples of sustainability impact assessment and a case study from the Queensland local urban planning context to build an argument and potential starting point for impact assessment in local planning processes.

Outsourcing data storage without outsourcing trust in cloud computing

The main theme of this thesis is to allow the users of cloud services to outsource their data without the need to trust the cloud provider. The method is based on combining existing proof-of-storage schemes with distance-bounding protocols. Specifically, cloud customers will be able to verify the confidentiality, integrity, availability, fairness (or mutual non-repudiation), data freshness, geographic assurance and replication of their stored data directly, without having to rely on the word of the cloud provider.

Attribute-based functional encryption on lattices

We introduce a broad lattice manipulation technique for expressive cryptography, and use it to realize functional encryption for access structures from post-quantum hardness assumptions. Specifically, we build an efficient key-policy attribute-based encryption scheme, and prove its security in the selective sense from learning-with-errors intractability in the standard model.

Predicate encryption for multi-inner-products

Predicate encryption is a new primitive that supports flexible control over access to encrypted data. We study predicate encryption systems, evaluating a wide class of predicates. Our systems are more expressive than the existing attribute-hiding systems in the sense that the proposed constructions support not only all existing predicate evaluations but also arbitrary conjunctions and disjunctions of comparison and subset queries. Toward our goal, we propose encryption schemes supporting multi-inner-product predicate and provide formal security analysis. We show how to apply the proposed schemes to achieve all those predicate evaluations.

If you build it... film studios and the transformative effects of migrating media production

In the years since the release of the film Field of Dreams, the phrase “If you build it, they will come” has become a cliché beloved by journalists, boosters of speculative land developments or remediations and misty-eyed enthusiasts of a host of unlikely schemes. It is one of the articles of faith of the location interest, the coalition of actors motivated to work to attract film business to a particular place. The phrase is full of optimism and potential. It seeks to instill confidence that the construction of production infrastructure like studios and the nourishment of conditions for local service providers will drive the (economic) locomotive and open the (celebrity) stargate. Unfortunately sometimes, it is just a crazy dream.

Fraud risk and the visibility of carbon

In recent years, carbon has been increasingly rendered ‘visible’ both discursively and through political processes that have imbued it with economic value. Greenhouse gas (GHG) emissions have been constructed as social and environmental costs and their reduction or avoidance as social and economic gain. The ‘marketisation’ of carbon, which has been facilitated through various compliance schemes such as the European Union Emissions Trading Scheme (EU ETS), the Kyoto Protocol, the proposed Australian Emissions Reduction Scheme and through the voluntary carbon credit market, have attempted to bring carbon into the ‘foreground’ as an economic liability and/or opportunity. Accompanying the increasing economic visibility of carbon are reports of frauds and scams – the ‘gaming of carbon markets’(Chan 2010). As Lohmann (2010: 21) points out, ‘what are conventionally classed as scams or frauds are an inevitable feature of carbon offset markets, not something that could be eliminated by regulation targeting the specific businesses or state agencies involved’. This paper critiques the disparate discourses of fraud risk in carbon markets and examines cases of fraud within emerging landscapes of green criminology.

The evolution and biogeography of the austral horse fly tribe Scionini (Diptera: Tabanidae: Pangoniinae) inferred from multiple mitochondrial and nuclear genes

Phylogenetic relationships within the Tabanidae are largely unknown, despite their considerable medical and ecological importance. The first robust phylogenetic hypothesis for the horse fly tribe Scionini is provided, completing the systematic placement of all tribes in the subfamily Pangoniinae. The Scionini consists of seven mostly southern hemisphere genera distributed in Australia, New Guinea, New Zealand and South America. A 5757. bp alignment of 6 genes, including mitochondrial (COI and COII), ribosomal (28S) and nuclear (AATS and CAD regions 1, 3 and 4) genes, was analysed for 176 taxa using both Bayesian and maximum likelihood approaches. Results indicate the Scionini are strongly monophyletic, with the exclusion of the only northern hemisphere genus Goniops. The South American genera Fidena, Pityocera and Scione were strongly monophyletic, corresponding to current morphology-based classification schemes. The most widespread genus Scaptia was paraphyletic and formed nine strongly supported monophyletic clades, each corresponding to either the current subgenera or several previously synonymised genera that should be formally resurrected. Molecular results also reveal a newly recognised genus endemic to New Zealand, formerly placed within Scaptia. Divergence time estimation was employed to assess the global biogeographical patterns in the Pangoniinae. These analyses demonstrated that the Scionini are a typical Gondwanan group whose diversification was influenced by the fragmentation of that ancient land mass. Furthermore, results indicate that the Scionini most likely originated in Australia and subsequently radiated to New Zealand and South American by both long distance dispersal and vicariance. The phylogenetic framework of the Scionini provided herein will be valuable for taxonomic revisions of the Tabanidae.

Creative entrepreneurship education for graduate employability in the creative arts

The higher education sector in Australia is under increasing pressure to prove quality and efficacy of education provision, including graduate outcomes. One of the central tasks of higher education has become to prepare nascent professionals as far as possible for initial employment and future working lives beyond this (Boden & Nedeva, 2010). Tertiary educators in the creative arts face significant and distinctive challenges in demonstrating graduate employability, and creative graduates consistently have the poorest outcomes of any subject grouping. In part, this is because the national graduate destinations survey (Graduate Careers Council of Australia, 2012) does not cater to the distinctive ‘portfolio’ nature of creative careers, or take account of the fact that creative careers can take concerted effort over several years to establish (e.g., McCowan & Wyganowska, 2010). However, it is worth asking whether we as tertiary arts educators are doing enough to prepare creative arts students for the world of work, particularly given that the majority of them will be self-employed to some degree (Bureau of Labour Statistics, 2011, Throsby & Zednik, 2010), and will be challenged to build their own careers without recourse to the support of HR departments or intra-firm promotion schemes. It has been demonstrated empirically that career management and creative enterprise skills are among the most important graduate capabilities in determining early creative career success (Bridgstock, 2011), although these skills do not appear in the Learning and Teaching Academic Standards for the Creative and Performing Arts (2010). This paper explores the nature and development of enterprise capabilities for creative arts students (as distinct from students of the business school), examines best practice in the field internationally, and proposes a theoretically-driven creative arts-specific enterprise curriculum model which commences in first year, for demonstrable impact on student enterprise behaviours (such as grant seeking, professional networking and intention to start an enterprise) and employability.

BoP and MNCs: where is the market and where the source of innovation?

ln 2004 Prahalad made managers aware of the great economic opportunity that the population at the BoP (Base of the Pyramid) could represent for business in the tom of new potential consumers. However, MNCs (Multi-National Corporations) have continued to fail in penetrating low income markets, arguably because applied strategies are often the same adopted at the top of the pyramid. Even in those few cases where products get re-envisioned, theie introduction in contexts of extreme poverty only induces new needs and develops new dependencies. At best the rearrangement of business models by MNCs has meant the realization of CSR (Corporate Social Responsibly) schemes that have validity from a marketing perspective, but still lack the crucial element of social embeddedness (London & Hart, 2004). Today the challenge is lo reach the lowest population tier with reinvented business models based on principles of value co-creation. Starting from a view of the potential consumer at the BoP as a ring of continuity in the value chain process – a resource that can itself produce value - this paper concludes proposing an alternative innovative approach to operate in developing markets that overturns the roles of MNCs and the BoP. The proposed perspective of ‘reversed' source of innovation and primary target market builds on two fundamental tenets: traditional knowledge is rich and greatly unexploded, and markets at the lop of the pyramid are saturated with unnecessary products / practices that have lost contact with the natural environment.

BoP and MNCs: where is the market and where the source of innovation?

ln 2004 Prahalad made managers aware of the great economic opportunity that the population at the BoP (Base of the Pyramid) could represent for business in the tom of new potential consumers. However, MNCs (Multi-National Corporations) have continued to fail in penetrating low income markets, arguably because applied strategies are often the same adopted at the top of the pyramid. Even in those few cases where products get re-envisioned, theie introduction in contexts of extreme poverty only induces new needs and develops new dependencies. At best the rearrangement of business models by MNCs has meant the realization of CSR (Corporate Social Responsibly) schemes that have validity from a marketing perspective, but still lack the crucial element of social embeddedness (London & Hart, 2004). Today the challenge is lo reach the lowest population tier with reinvented business models based on principles of value co-creation. Starting from a view of the potential consumer at the BoP as a ring of continuity in the value chain process – a resource that can itself produce value - this paper concludes proposing an alternative innovative approach to operate in developing markets that overturns the roles of MNCs and the BoP. The proposed perspective of ‘reversed' source of innovation and primary target market builds on two fundamental tenets: traditional knowledge is rich and greatly unexploded, and markets at the lop of the pyramid are saturated with unnecessary products / practices that have lost contact with the natural environment.

Sequential decision fusion of multibiometrics applied to text-dependent speaker verification for controlled errors

Reliability of the performance of biometric identity verification systems remains a significant challenge. Individual biometric samples of the same person (identity class) are not identical at each presentation and performance degradation arises from intra-class variability and inter-class similarity. These limitations lead to false accepts and false rejects that are dependent. It is therefore difficult to reduce the rate of one type of error without increasing the other. The focus of this dissertation is to investigate a method based on classifier fusion techniques to better control the trade-off between the verification errors using text-dependent speaker verification as the test platform. A sequential classifier fusion architecture that integrates multi-instance and multisample fusion schemes is proposed. This fusion method enables a controlled trade-off between false alarms and false rejects. For statistically independent classifier decisions, analytical expressions for each type of verification error are derived using base classifier performances. As this assumption may not be always valid, these expressions are modified to incorporate the correlation between statistically dependent decisions from clients and impostors. The architecture is empirically evaluated by applying the proposed architecture for text dependent speaker verification using the Hidden Markov Model based digit dependent speaker models in each stage with multiple attempts for each digit utterance. The trade-off between the verification errors is controlled using the parameters, number of decision stages (instances) and the number of attempts at each decision stage (samples), fine-tuned on evaluation/tune set. The statistical validation of the derived expressions for error estimates is evaluated on test data. The performance of the sequential method is further demonstrated to depend on the order of the combination of digits (instances) and the nature of repetitive attempts (samples). The false rejection and false acceptance rates for proposed fusion are estimated using the base classifier performances, the variance in correlation between classifier decisions and the sequence of classifiers with favourable dependence selected using the 'Sequential Error Ratio' criteria. The error rates are better estimated by incorporating user-dependent (such as speaker-dependent thresholds and speaker-specific digit combinations) and class-dependent (such as clientimpostor dependent favourable combinations and class-error based threshold estimation) information. The proposed architecture is desirable in most of the speaker verification applications such as remote authentication, telephone and internet shopping applications. The tuning of parameters - the number of instances and samples - serve both the security and user convenience requirements of speaker-specific verification. The architecture investigated here is applicable to verification using other biometric modalities such as handwriting, fingerprints and key strokes.

Migrating to a sustainable energy system : distributed generation and storage, fuel cells and hypercars

This paper examines a number of issues in sustainable energy generation and distribution, and explores avenues that are available for integration of our society’s energy supplies. In particular, the paper presents a way in which transport vehicle energy supplies could be integrated with distributed generation schemes to achieve synergistic and beneficial outcomes. The worldwide energy system contains fundamental problems that result directly from the use of unsustainable fuels and a lack of energy system integration. There is a need to adopt an integrated, sustainable energy system for our society. The adoption of distributed generation could result in beneficial restructuring of the energy trade, and a change in the role of energy providers. Inherent benefits in distributed generation schemes would directly combat barriers to installation of renewable generation facilities, which might prove distributed renewable energy sources to be more feasible. The presence of fuel cells, batteries, power electronic inverters and intelligent controls in vehicles of the future provides many opportunities for the integration of vehicle energy supplies into a distributed generation scheme. In such a system, vehicles could play a major role in power generation and storage.

Migrating to a sustainable energy system : distributed generation and storage, fuel cells and hypercars

This paper examines a number of issues in sustainable energy generation and distribution, and explores avenues that are available for integration of our society’s energy supplies. In particular, the paper presents a way in which transport vehicle energy supplies could be integrated with distributed generation schemes to achieve synergistic and beneficial outcomes. The worldwide energy system contains fundamental problems that result directly from the use of unsustainable fuels and a lack of energy system integration. There is a need to adopt an integrated, sustainable energy system for our society. The adoption of distributed generation could result in beneficial restructuring of the energy trade, and a change in the role of energy providers. Inherent benefits in distributed generation schemes would directly combat barriers to installation of renewable generation facilities, which might prove distributed renewable energy sources to be more feasible. The presence of fuel cells, batteries, power electronic inverters and intelligent controls in vehicles of the future provides many opportunities for the integration of vehicle energy supplies into a distributed generation scheme. In such a system, vehicles could play a major role in power generation and storage.

Decision making guidelines for sustainable construction of industrialised building systems

The construction industry has an obligation to respond to sustainability expectations of our society. Solutions that integrate innovative, intelligent and sustainability deliverables are vital for us to meet new and emerging challenges. Industrialised Building Systems (IBS), or known otherwise as prefabrication, employs a combination of ready-made components in the construction of buildings. They promote quality of production, enhance simplification of construction processes and minimise waste. The unique characteristics of this construction method respond well to sustainability. Despite the promises however, IBS has yet to be effectively implemented in Malaysia. There are often misconceptions among key stakeholders about IBS applications. The existing rating schemes fail to assess IBS against sustainability measures. To ensure the capture of full sustainability potential in buildings developed, the critical factors and action plans agreeable to all participants in the development processes need to be identified. Through questionnaire survey, eighteen critical factors relevant to IBS sustainability were identified and encapsulated into a conceptual framework to coordinate a systematic IBS decision making approach. Five categories were used to separate the critical factors into: ecological performance; economic value; social equity and culture; technical quality; and implementation and enforcement. This categorisation extends the "Triple Bottom Lines" to include social, economic, environmental and institutional dimensions. Semi-structured interviews help identify strategies of actions and solutions of potential problems through a SWOT analysis framework. These tools help the decision-makers maximise the opportunities by using available strengths, avoid weaknesses, and diagnose possible threats in the examined issues. The recommendations formed an integrated action plan to present information on what and how to improve sustainability through tackling each critical factor during IBS development. It can be used as part of the project briefing documents for IBS designers. For validation and finalisation the research deliverables, three case studies were conducted. The research fills a current gap by responding to IBS project scenarios in developing countries. It also provides a balanced view for designers to better understand sustainability potential and prioritize attentions to manage sustainability issues in IBS applications.