Effects of neuromuscular electrical stimulation, laser therapy and LED therapy on the masticatory system and the impact on sleep variables in cerebral palsy patients: a randomized, five arms clinical trial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mechanical and thermal cycling effects on the flexural strength of glass ceramics fused to titanium

This study evaluated the effects of mechanical and thermal cycling on the flexural strength (ISO 9693) of three brands of ceramics fused to commercially pure titanium (cpTi). Metallic frameworks of 25 x 3 x 0.5 mm dimensions (N = 84) were cast in cpTi, followed by 150-mu m aluminum oxide airborne particle abrasion at a designated area of the frameworks (8 x 3 mm). Bonder and opaque ceramic were applied on the frameworks, and then the corresponding ceramic (Triceram, Super Porcelain Ti-22, Vita Titankeramik) was fired onto them (thickness: 1 mm). Half of the specimens from each ceramic-metal combination were randomly tested without aging (only water storage at 37 degrees C for 24 hours), while the other half were mechanically loaded (20,000 cycles under 10 N load, immersion in distilled water at 37 degrees C) and thermocycled (3,000 cycles, between 5-55 degrees C, dwell time of 13 seconds). After the flexural strength test, failure types were noted. Mechanical and thermal cycling decreased the mean flexural strength values significantly (p<0.05) for all the three ceramic-cpTi combinations tested when compared to the control group. In all the three groups, failure type was exclusively adhesive at the opaque ceramic-cpTi interfacial zone with no presence of ceramic on the substrate surface except for a visible oxide layer.

Effects of Nd : YAG and Er : YAG lasers on the sealing of root canal fillings

Objective: the ability of the laser irradiation to promote the cleaning and disinfection of the radicular canal system has become this type of treatment in a viable and real alternative in endodontics. The purpose of this study was to evaluate the apical marginal sealing of root canal fillings after the irradiation with the laser of Nd:YAG or of Er:YAG. Materials and Methods: Forty-two human, extracted single-rooted teeth had their crowns sectioned and the root canals prepared with a no. 70 K-file. Then, they were dried and divided into three groups according to canal wall treatment: group 1: the canals were filled with EDTA for 3 min, followed by irrigation with 1% sodium hypochlorite solution; group 2: the canal walls were irradiated with Nd:YAG laser; and group 3: the canal walls were irradiated with Er:YAG laser. Afterwards, the root canals were obturated by the lateral condensation technique. The roots were externally waterproof, except in the apical foramen and immerged in 2% methylene blue aqueous solution during 48 hours. Results: the results showed that the largest infiltrations happened in the group 3-Er:YAG (7.3 mm), proceeded by the group 1-EDTA (1.6 mm) and by the group 2-Nd:YAG (0.6 mm). The group Er:YAG differed statistically of the others (p < 0.05). Conclusion: It was concluded that the Er:YAG laser intracanal irradiation previously to the root canal filling must be used with caution until future research is define the best parameters for it's use.

Effects of Surface Hydration and Application Method on the Bond Strength of Self-Etching Adhesives to Dentin

The effect of application methods and dentin hydration on the bond strength of three self-etching adhesives (SEA) were evaluated; 195 extracted bovine incisors were used. The buccal surface was ground in order to expose the dentin, which remained 2-mm minimum thickness, measured by a thickness meter through an opening on the lingual surface. Adper Single Bond 2 (TM) was used for the control group. The SEA were applied following two modes of application: passive or active and two hydration states of the dentin surface-dry and wet. After light-curing, composite buildups were made using Grandio (TM) composite. The specimens were sectioned and tested with a microtensile bond strength test. The application method and the hydration state resulted in statistical differences (p = 0.000) making the values of active application for mu TBS to dentin higher than passive application. The wet surfaces showed higher mu TBS to dentin ratios than dry surfaces. There were no statistical differences in mu TBS among the SEA tested but there were differences regarding to control group.

Effects of Self-Etching Adhesive Systems Used in the Dental Modelling Technique on the Cohesive Strength of Composite Resin

This study evaluated the cohesive strength of composite using self-etching adhesive systems (SE) in the lubrication of instruments between layers of composite. The specimens were made by using a Teflon (R) device. SE were used at the interface to lubricate the instruments: Group 1(G1) - control group, no lubricant was used; Group 2(G2) -Futurabond (R) M; Group 3(G3) - Optibond (R) All-In-One; Group 4(G4) - Clearfil (R) SE Bond; Group 5(G5) - Futurabond (R) NR; Group 6(G6) - Adper (R) SE Plus; Group 7(G7) - One Up Bond (R) F. Specimens were submitted to the tensile test to evaluate the cohesive strength. Data were submitted to the ANOVA and Tukey tests. ANOVA showed a value of p = 0.00. The average means (SD): G2 = 11.33(+/-3.44) a, G3 = 15.36(+/-4.06) ab, G4 = 18.9(+/-4.72) bc, G7 = 19.62(+/-4.46) bc, G5 = 21.02(+/-5.09) bc, G6 = 23.39(+/-4.17) cd, and G1 = 28.49(+/-2.89) d. All SE decreased the cohesive strength of the composite, except for Adper (R) SE Plus.

Effects of Resinous Monomers Used in Restorative Dental Modeling on the Cohesive Strength of Composite Resin

Purpose: The purpose of this study was to evaluate the cohesive strength of the composite using different resinous monomers to lubricate instruments used in the Restorative Dental Modeling Insertion Technique (RDMIT).Materials and Methods: The composite specimens were made by using a prefabricated Teflon device. Different resinous monomers were used at the interface to lubricate the instruments, for a total of 72 specimens divided into 6 groups: 1. control group, no resinous monomer was used; 2. Composite Wetting Resin; 3. C & B Liquid; 4. Scotchbond Multi-Purpose Adhesive; 4. Adper Single Bond Adhesive; 6. Prime & Bond NT. Specimens were submitted to the circular area tensile test to evaluate the cohesive strength at the composite interfaces. Data were analyzed using ANOVA and Tukey's test (alpha = 0.05).Results: ANOVA showed a value of p < 0.0001, which indicated that there were significant differences among the groups. The means (SD) for the different groups were: Adper Single Bond Adhesive: 26 (12) a; control group: 28 (3) ab; Prime & Bond NT: 32 (12) ab; Composite Wetting Resin: 36 (9) abc; C&B Liquid: 38 (7) bc; Scotchbond Multi-Purpose Adhesive: 46 (10) c. Groups denoted with the same letters were not significantly different. Only Scotchbond Multi-Purpose Adhesive, used for direct restorations, had a statistically significantly higher bond strength than the control group, Adper Single Bond Adhesive, and Prime & Bond NT. Adper Single Bond with Adhesive showed a statistically significantly lower mean value than C & B Liquid.Conclusion: The results of this study indicate that the resinous monomers used for lubricating the instruments in the RDMIT did not alter the mechanical properties of the composite, and therefore did not reduce the cohesive bond strength at the composite interfaces.

Effects of Surface Hydration State and Application Method on the Bond Strength of Self-etching Adhesives to Cut Enamel

Purpose: To evaluate the effect of surface hydration state and application method on the microtensile bond strength of one-step self-etching adhesives systems to cut enamel.Materials and Methods: One hundred ninety-five bovine teeth were used. The enamel on the buccal side was flattened with 600-grit SiC paper. For the control group, 15 teeth received Adper Single Bond 2, applied according to manufacturer's recommendations. The other specimens were divided into three groups according to the adhesive system used: Futura Bond M (FM; Voco), Clearfil S-3 Bond (CS; Kuraray), and Optibond All in One (OA; Kerr). For each group, two hydration states were tested: D: blown dry with air; W: the excess of water was removed with absorbent paper. Two application methods were tested: P (passive): the adhesive was simply left on the surface; A (active): the adhesive was rubbed with an applicator point. A coat of Grandio composite resin (Voco) was applied on the surface. The teeth were sectioned to obtain enamel-resin sticks (1 x 1 mm), which underwent microtensile bond testing. The data in MPa were submitted to a three-way ANOVA and Tukey's test (alpha = 5%).Results: The ANOVA showed significant differences for application method and the type of adhesive, but not for hydration state. For the application method, the results of Tukey's test were: P: 31.46 (+/-7.09)a; A: 34.04 (+/-7.19)b. For the type of adhesive, the results were: OA: 31.29 (+/-7.05)a; CS: 32.28 (+/-7.14)a; FM: 34.68 (+/-7.17)b; different lower-case letters indicate statistically significant differences.Conclusion: Active application improved the bond strength to cut enamel. The adhesive Futurabond M showed the highest bond strength to cut enamel.

Burnt sugarcane harvesting: Particulate matter exposure and the effects on lung function, oxidative stress, and urinary 1-hydroxypyrene

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of losartan on ventricular remodeling in experimental infarction in rats

OBJECTIVE: To evaluate the effects of losartan on ventricular remodeling and on survival after myocardial infarction in rats. METHODS: After surgical occlusion of left coronary artery, 84 surviving male Wistar rats were divided into two groups: LO treated with losartan (20mg/kg/day, n=33) and NT (n=51), without medication. After 3 months, we analyzed mortality; ventricular to body mass ratio (VM /BM); myocardial hydroxyproline concentration (HOP); isovolumetric pressure, +dp/dt, -dp/dt, and diastolic volume/left ventricle mass ratio (VO/LV). RESULTS: Mortality was: LO = 22%, and NT = 47% (p<0.05). Ventricular mass,(VM/BM, mg/g) was 4.14 ± 0.76 and 3.54±0.48, in the NT and LO groups, respectively (p<0.05). HOP (median) was 4.92 upsilong/mg in the LO and 5.54 upsilong/g in the NT group (p>0.05). The V0/LV values (median) were 0.24 mL/g in group LO and 0.31 mL/g in group NT (p<0.05) compared to NT group. There were no differences between the groups for +dp/dt and -dp/dt parameters. CONCLUSION: 1- The use of losartan myocardial infarction causes an attenuation of ventricular remodeling, bringing about an increased survival, an attenuation of ventricular hypertrophy and dilation, and an improvement of the isovolumetric pressure; 2- the treatment does not modify the myocardial collagen concentration.

Immunologic aspects of West syndrome and evidence of plasma inhibitory effects on T cell function

OBJETIVO: O objetivo deste estudo foi determinar o perfil da deficiência imune em um grupo bem definido de epilepsia: crianças com síndrome de West (SW) e seus padrões EEG de evolução, idade-dependentes, como os complexos onda-aguda- onda lenta generalizadas da síndrome de Lenox-Gastaut (SLG) e as pontas multifocais independentes (PMI). MÉTODO: Um grupo de 50 crianças, 33 com SW, 10 com SLG, 7 com PMI e 20 crianças sadias (controle) foram avaliadas em relação aos seguintes parâmetros:determinação de subpopulações de linfócitos T (CD1, CD3, CD4 e CD8), relação CD4/CD8 e resposta proliferativa de linfócitos frente a fitohemaglutinina (PHA), na presença de plasma autólogo ou de plasma AB (homólogo). A prova cutânea de sensibilização ao Dinitroclorobenzeno (DNCB) foi realizada apenas nos pacientes. Os níveis séricos de IgG, IgA e IgM foram comparados aos valores normais em crianças Brasileiras, em diferentes faixas etárias. RESULTADOS: A resposta ao DNCB foi ausente ou fracamente reativa em 76% dos pacientes. Níveis séricos elevados de IgG (45,7%) e de IgM (61,4%) e baixos de IgA (23,9%) foram detectados nos pacientes. A determinação das subpopulações de linfócitos T em sangue periférico mostrou: deficiência nas proporções de células CD3+ (p<0,05) e de CD4+ (p<0,05), aumento de CD8+ (p<0,01) e diminuição da relação CD4 / CD8 (p<0,001). A proporção de células CD1+ no grupo controle manteve-se menor que 3%, enquanto que em 18% dos pacientes esses níveis variaram entre 3 e 11%. A resposta proliferativa de linfócitos frente a PHA revelou índices blastogênicos significativamente mais baixos apenas quando células dos pacientes foram cultivadas na presença do próprio plasma (plasma autólogo). Quando estas células foram cultivadas na presença de plasma AB, não se evidenciou diferença significativa em relação ao grupo controle. CONCLUSÃO: A imunodeficiência na SW caracterizou-se por: anergia, alteração de imunidade mediada por células e dos níveis de imunoglobulinas, presença de timócitos imaturos na circulação periférica e deficiência funcional de linfócitos T induzida por fatores plasmáticos inibidores. Discutem-se as principais evidências de disfunção imune como imunodeficiência e autoimunidade.

Fighting by sleep-deprived rats as a possible manifestation of panic: effects of sodium lactate

Increased fighting is an effect of desynchronized sleep deprivation (DSD) in rats, and recently this behavior has been suggested to be spontaneous panic and equivalent to panic disorder. In the present study we tested this hypothesis by evaluating the effect of sodium lactate on this aggressiveness, because this substance is recognized to induce spontaneous panic attacks in patients. A total of 186 male albino Wistar rats, 250-350 g, 90-120 days of age, were submitted to DSD (multiple platform method) for 0, 4, or 5 days. At the end of the deprivation period the rats were divided into subgroups respectively injected intraperitoneally with 1.86, 2.98 and 3.72 g/kg of 1 M sodium lactate, or 1.86 and 3.72 g/kg of 2 M sodium lactate. The control animals were submitted to the same procedures but received equivalent injections of sodium chloride. Regardless of DSD time, sleep-deprived animals that received sodium lactate presented a significantly higher mean number of fights (0.13 ± 0.02 fights/min) and a longer mean time spent in confrontation (2.43 ± 0.66 s/min) than the controls (0.01 ± 0.006 fights/min and 0.12 ± 0.07 s/min, respectively; P<0.01, Student t-test). For the sodium lactate group, concentration of the solution and time of deprivation increased the number of fights, with the mean number of fights and mean duration of fighting episodes being greater with the 2.98 g/kg dose using 1 M lactate concentration. These results support the hypothesis that fighting induced by DSD is probably a spontaneous panic manifestation. However, additional investigations are necessary in order to accept this as a promising animal model for studies on panic disorder.

Effects of lidocaine on lipopolysaccharide-induced synovitis in horses

Injetou-se lidocaína (100mg 2%) na articulação do carpo para avaliar a resposta inflamatória induzida pela injeção (1,5ng) intra-articular de lipopolissacarídeo (LPS) de E. coli. Utilizaram-se 17 cavalos Mangalarga não castrados, entre dois e três anos, divididos em três grupos. No carpo esquerdo (CE) administrou-se solução fisiológica a 0,9% (SAL) e no carpo direito (CD) uma das seguintes combinações: grupo A (n=6) LPS mais SAL, grupo B (n=6) LPS mais lidocaína e grupo C (n=5) lidocaína mais SAL. Amostras do líquido sinovial e de sangue foram colhidas imediatamente antes da injeção de LPS (T0) e às 1,30 (T1), 3 (T2), 6 (T3), 12 (T4) e 36 horas (T5) após a injeção. Variáveis clínicas e físicas, e características bioquímicas e celulares do líquido sinovial foram avaliadas nos mesmos tempos. A resposta inflamatória local e sistêmica foi mensurada pela concentração do TNF-alfa no soro e líquido sinovial. Observou-se aumento da concentração do TNF-alfa nas articulações injetadas com LPS às 3h no grupo A e de 1,30 às 3h no grupo B. Concluiu-se que o LPS induziu o processo inflamatório e que a lidocaína não inibiu nem atenuou a sinovite induzida pelo LPS, nem a síntese e liberação de TNF-alfa .

Effects of nitrous oxide on minimum alveolar concentration of desflurane in dogs

Estudaram-se os efeitos do óxido nitroso (N2O) sobre a concentração alveolar mínima (CAM) do desfluorano. Trinta cães foram distribuídos em dois grupos: desfluorano (GD) e N2O e desfluorano (GDN). Os do GD receberam propofol (8,9±1,65mg/kg) para intubação orotraqueal e após, 11,5V% de desfluorano em 100% de O2. Após 30 minutos, os animais receberam estímulo elétrico e não havendo reação do animal, reduziu-se a concentração em 1,5V%. Repetiu-se o protocolo a cada 15 minutos, cessando-se os estímulos quando observada reação voluntária. Os GDN foram submetidos ao mesmo protocolo, substituindo-se o fluxo diluente por 30% O2 e 70% N2O. Mensuraram-se freqüências cardíaca (FC) e respiratória (FR), pressões arteriais sistólica, diastólica e média (PAS, PAD e PAM), concentração de dióxido de carbono ao final da expiração (ETCO2), saturação de oxihemoglobina (SpO2), temperatura corpórea (TC) e a CAM do desfluorano. Observou-se aumento da FC, ETCO2 e SpO2, e redução da FR e da TC concomitantemente à administração da maior dose de desfluorano, além de redução da CAM do desfluorano. As pressões arteriais diminuíram em M30 aumentando posteriormente. Concluiu-se que o N2O associado ao desfluorano reduz em 16% a CAM do anestésico volátil. Além disso, essa associação promoveu aumento da FC e depressão respiratória.

Effects of experimental amitraz intoxication in cats

Este trabalho estudou os efeitos da intoxicação experimental por amitraz em 16 gatos, distribuídos, aleatoriamente, em dois grupos: grupo amitraz - animais receberam amitraz a 1,5% na dose de 1,0 mg/kg IV; e grupo controle - animais sem amitraz. Parâmetros fisiológicos sangüíneos, do sistema cardiorespiratório e de sedação foram aferidos até 360min. Perfil sangüíneo, uréia, creatinina, alanina aminotransferase e aspartato aminotransferase não foram afetados pelo amitraz. Sedação, perda de reflexos, hipotermia, bradicardia, bradiarritmias, hipotensão, bradipnéia, midríase, além de transitória hiperglicemia, hipoinsulinemia e diminuição dos níveis de cortisol, foram observados nos gatos experimentalmente expostos ao amitraz. Os efeitos alfa 2-adrenérgicos induzidos pela intoxicação por amitraz em gatos são muito similares aos mesmos efeitos relatados em outras espécies, contribuindo com mais informações dessa intoxicação para a toxicologia veterinária.

Dimethyl sulfoxide effects on the febrile response to lipopolysaccharide injection in rabbits

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)