Rare earth elements from the Atlantic Sector

We present a Rare Earth Elements (REE) record at decadal resolution determined in the EPICA ice core drilled in Dronning Maud Land (EDML) in the Atlantic Sector of the East Antarctic Plateau, covering the transition from the last glacial age (LGA) to the early Holocene (26 600-7500 yr BP). Additionally, samples from potential source areas (PSAs) for Antarctic dust were analysed for their REE characteristics. The dust provenance is discussed by comparing the REE fingerprints in the ice core and the PSAs samples. We find a shift in REE composition at 15 200 yr BP in the ice core samples. Before 15 200 yr BP, the dust composition is very uniform and its provenance was likely to be dominated by a South American source. After 15 200 yr BP, multiple sources such as Australia and New Zealand become relatively more important, albeit South America is possibly still an important dust supplier. A similar change in the dust characteristics was observed in the EPICA Dome C ice core at around ~15 000 yr BP. A return to more glacial dust characteristics between ~8300 and ~7500 yr BP, as observed in the EPICA Dome C core, could not be observed in the EDML core. Consequently, the dust provenance at the two sites must have been different at that time.

Strontium isotope dating of ODP Leg 133 sediments

The strontium-isotope dating method, based on the strontium-isotope seawater curve, was used to date stratigraphic events recognized in carbonate sediments drilled during Leg 133 on the Queensland and Marion plateaus. The strontium isotope ages of these events are used to correlate paleoceanographic changes, delineated from oxygen isotope signals, and paleoenvironmental or facies changes recorded in the lithostratigraphy. Results indicate that a strong connection exists between prevailing paleoenvironmental conditions and the developmental style of a carbonate platform. Also, the strontium-isotope ages of discrete dolomite intervals within the sequences were determined, indicating that multiple dolomitization events took place and that a hydrodynamically driven process may be currently active within the modern carbonate platform.

Probability sampling protocol of classification maps from spaceborne/airborne image

To deliver sample estimates provided with the necessary probability foundation to permit generalization from the sample data subset to the whole target population being sampled, probability sampling strategies are required to satisfy three necessary not sufficient conditions: (i) All inclusion probabilities be greater than zero in the target population to be sampled. If some sampling units have an inclusion probability of zero, then a map accuracy assessment does not represent the entire target region depicted in the map to be assessed. (ii) The inclusion probabilities must be: (a) knowable for nonsampled units and (b) known for those units selected in the sample: since the inclusion probability determines the weight attached to each sampling unit in the accuracy estimation formulas, if the inclusion probabilities are unknown, so are the estimation weights. This original work presents a novel (to the best of these authors' knowledge, the first) probability sampling protocol for quality assessment and comparison of thematic maps generated from spaceborne/airborne Very High Resolution (VHR) images, where: (I) an original Categorical Variable Pair Similarity Index (CVPSI, proposed in two different formulations) is estimated as a fuzzy degree of match between a reference and a test semantic vocabulary, which may not coincide, and (II) both symbolic pixel-based thematic quality indicators (TQIs) and sub-symbolic object-based spatial quality indicators (SQIs) are estimated with a degree of uncertainty in measurement in compliance with the well-known Quality Assurance Framework for Earth Observation (QA4EO) guidelines. Like a decision-tree, any protocol (guidelines for best practice) comprises a set of rules, equivalent to structural knowledge, and an order of presentation of the rule set, known as procedural knowledge. The combination of these two levels of knowledge makes an original protocol worth more than the sum of its parts. The several degrees of novelty of the proposed probability sampling protocol are highlighted in this paper, at the levels of understanding of both structural and procedural knowledge, in comparison with related multi-disciplinary works selected from the existing literature. In the experimental session the proposed protocol is tested for accuracy validation of preliminary classification maps automatically generated by the Satellite Image Automatic MapperT (SIAMT) software product from two WorldView-2 images and one QuickBird-2 image provided by DigitalGlobe for testing purposes. In these experiments, collected TQIs and SQIs are statistically valid, statistically significant, consistent across maps and in agreement with theoretical expectations, visual (qualitative) evidence and quantitative quality indexes of operativeness (OQIs) claimed for SIAMT by related papers. As a subsidiary conclusion, the statistically consistent and statistically significant accuracy validation of the SIAMT pre-classification maps proposed in this contribution, together with OQIs claimed for SIAMT by related works, make the operational (automatic, accurate, near real-time, robust, scalable) SIAMT software product eligible for opening up new inter-disciplinary research and market opportunities in accordance with the visionary goal of the Global Earth Observation System of Systems (GEOSS) initiative and the QA4EO international guidelines.

Respiration rate of Themisto libellula determined experimentally

Daily ingestion rates of the pelagic hyperiid amphipod Themisto libellula were studied in the marginal ice zone of the Arctic Fram Strait by feeding experiments, respiration measurements and an allometric approach based on body mass. Amphipods were collected by stratified multiple opening/closing net hauls and Rectangular Midwater Trawl (RMT 8) in August 2000 during the expedition ARK XVI/2 of R/V "Polarstern". T. libellula occurred with abundances of 0.043 and 0.015 ind/m**3 in the upper 30 m of the water column at two RMT 8 stations. Based on respiration data, the daily ingestion necessary to cover metabolic energy demands measured 1.9±0.6% of body carbon per day. Actual prey consumption during feeding experiments with Calanus copepodids as prey was very similar and accounted for 1.9±1.5%/day, indicating that feeding on Calanus can meet the energy demands of T. libellula. In general, experimental results were slightly lower than the maximum potential ingestion (2%/day for an individual of median body dry mass of 32 mg) estimated by an allometric equation based on body mass, but feeding experiments showed a strong variability. Reduced metabolism and low ingestion rates of T. libellula are consistent with low ambient temperature, large body size, slow growth and long life span of this polar species. The effect of the active pelagic life style of T. libellula on metabolism and ingestion rate is discussed in comparison to the sympagic (i.e. ice-associated) amphipod Gammarus wilkitzkii of similar body size living in the same environment. In relation to the mesozooplankton biomass in the investigation area, the predation impact by T. libellula was low. However, high-Arctic conditions also limit the secondary production of principal prey species, such as Calanus glacialis and Calanus hyperboreus, so that even low predation rates may affect the growth of prey populations.

Dynamique des structures. Vulnérabilité aux bâtiments. Construction parasismique

La leçon s'addresse à la comprehension du comportement des bâtiments soumis à l'accéleration séismique, et présente une introduction au comportement dynamique de oscillateurs (un ou plusieurs dégrés de liberté), du comportément hystérétique des structures (selon modes de dissipation) et aux paramètres séismiques relevants à la conception parasismique, notamment aux spectres de réponse et de démande, et sa relation avec la capacité de la structure (courbe de capacité) où on peut identifier les niveaux de dommage -ou les critères de performance- pour des intensités séismique prévues au projet. Elle considère aussi les méthodes de définition et détermination de la vulnérabilité, façe aux séismes, des différentes typologies constructives, avec l'inclusion finale des typologies pour les sistèmes de contreventement et recomandations visées à éviter aux mêmes la concentration de dommage d'origine séismique. Lecture's goal focuses in the understanding of the behaviour of buildings under seismic excitation. It presents an introduction of dynamics (single or multiple degrees of freedom oscillators) and the hysteretic behaviour of ductile structures, introducing the seismic parameters relevant to the structural design, mostly in the context of response and demand spectra and their relations with capacity curves of structures. On the capacity curve obtained in pushover analysis, points representing the design objectives in terms of performance levels can be identified and related with seismic demand. Lecture deals also with methods on vulnerability analysis for building construction typologies and the behaviour (and related recommendations) of seismic resistant structural typologies, having the distribution of dissipative energy and damage in mind.

Contribución al estudio de la incompatibilidad y otras medidas relacionadas en la lógica borrosa

Resumen La investigación descrita en esta memoria se enmarca en el campo de la lógica borro¬sa. Más concretamente, en el estudio de la incompatibilidad, de la compatibilidad y de la suplementaridad en los conjuntos borrosos y en los de Atanassov. En este orden de ideas, en el primer capítulo, se construyen, tanto de forma directa como indirecta, funciones apropiadas para medir la incompatibilidad entre dos conjuntos borro-sos. Se formulan algunos axiomas para modelizar la continuidad de dichas funciones, y se determina si las medidas propuestas, y otras nuevas que se introducen, verifican algún tipo de continuidad. Finalmente, se establece la noción de conjuntos borrosos compatibles, se introducen axiomas para medir esta propiedad y se construyen algunas medidas de compa¬tibilidad. El segundo capítulo se dedica al estudio de la incompatibilidad y de la compatibilidad en el campo de los conjuntos de Atanassov. Así, en primer lugar, se presenta una definición axiomática de medida de incompatibilidad en este contexto. Después, se construyen medidas de incompatibilidad por medio de los mismos métodos usados en el caso borroso. Además, se formulan axiomas de continuidad y se determina el tipo de continuidad de las medidas propuestas. Finalmente, se sigue un camino similar al caso borroso para el estudio de la compatibilidad. En el tercer capítulo, después de abordar la antonimia de conjuntos borrosos y de conjuntos de Atanassov, se formalizan las nociones de conjuntos suplementarios en estos dos entornos y se presenta, en ambos casos, un método para obtener medidas de suplementaridad a partir de medidas de incompatibilidad vía antónimos. The research described in this report pertains to the field of fuzzy logic and specifically studies incompatibility, compatibility and supplementarity in fuzzy sets and Atanassov's fuzzy sets. As such is the case, Chapter 1 describes both the direct and indirect construction of appropriate functions for measuring incompatibility between two fuzzy sets. We formulate some axioms for modelling the continuity of functions and determine whether the proposed and other measures introduced satisfy any type of continuity. Chapter 2 focuses on the study of incompatibility and compatibility in the field of Ata¬nassov's fuzzy sets. First, we present an axiomatic definition of incompatibility measure in this field. Then, we use the same methods to construct incompatibility measures as in the fuzzy case. Additionally, we formulate continuity axioms and determine the type of conti¬nuity of the proposed measures. Finally, we take a similar approach as in the fuzzy case to the study of compatibility. After examining the antonymy of fuzzy sets and Atanassov's sets, Chapter 3 formalizes the notions of supplementary sets in these two domains, and, in both cases, presents a method for obtaining supplementarity measures from incompatibility measures via antonyms.

Models for Internal Quality Fruit Sorting, Based on Time- Domain Laser Reflectance Spectroscopy (TDRS)

Time domain laser reflectance spectroscopy (TDRS) was applied for the first time to evaluate internal fruit quality. This technique, known in medicine-related knowledge areas, has not been used before in agricultural or food research. It allows the simultaneous non-destructive measuring of two optical characteristics of the tissues: light scattering and absorption. Models to measure firmness, sugar & acid contents in kiwifruit, tomato, apple, peach, nectarine and other fruits were built using sequential statistical techniques: principal component analysis, multiple stepwise linear regression, clustering and discriminant analysis. Consistent correlations were established between the two parameters measured with TDRS, i.e. absorption & transport scattering coefficients, with chemical constituents (sugars and acids) and firmness, respectively. Classification models were built to sort fruits into three quality grades, according to their firmness, soluble solids and acidity.

GreenDisc: a HW/SW energy optimization framework in globally distributed computation

In recent future, wireless sensor networks (WSNs) will experience a broad high-scale deployment (millions of nodes in the national area) with multiple information sources per node, and with very specific requirements for signal processing. In parallel, the broad range deployment of WSNs facilitates the definition and execution of ambitious studies, with a large input data set and high computational complexity. These computation resources, very often heterogeneous and driven on-demand, can only be satisfied by high-performance Data Centers (DCs). The high economical and environmental impact of the energy consumption in DCs requires aggressive energy optimization policies. These policies have been already detected but not successfully proposed. In this context, this paper shows the following on-going research lines and obtained results. In the field of WSNs: energy optimization in the processing nodes from different abstraction levels, including reconfigurable application specific architectures, efficient customization of the memory hierarchy, energy-aware management of the wireless interface, and design automation for signal processing applications. In the field of DCs: energy-optimal workload assignment policies in heterogeneous DCs, resource management policies with energy consciousness, and efficient cooling mechanisms that will cooperate in the minimization of the electricity bill of the DCs that process the data provided by the WSNs.

GreenDisc: a HW/SW energy optimization framework in globally distributed computation

In recent future, wireless sensor networks ({WSNs}) will experience a broad high-scale deployment (millions of nodes in the national area) with multiple information sources per node, and with very specific requirements for signal processing. In parallel, the broad range deployment of {WSNs} facilitates the definition and execution of ambitious studies, with a large input data set and high computational complexity. These computation resources, very often heterogeneous and driven on-demand, can only be satisfied by high-performance Data Centers ({DCs}). The high economical and environmental impact of the energy consumption in {DCs} requires aggressive energy optimization policies. These policies have been already detected but not successfully proposed. In this context, this paper shows the following on-going research lines and obtained results. In the field of {WSNs}: energy optimization in the processing nodes from different abstraction levels, including reconfigurable application specific architectures, efficient customization of the memory hierarchy, energy-aware management of the wireless interface, and design automation for signal processing applications. In the field of {DCs}: energy-optimal workload assignment policies in heterogeneous {DCs}, resource management policies with energy consciousness, and efficient cooling mechanisms that will cooperate in the minimization of the electricity bill of the DCs that process the data provided by the WSNs.

Oprimización y paralelización de un algoritmo de sincronización mediante el uso de GPUs y la tecnología CUDA

En el presente documento se hablará acerca del desarrollo de un proyecto para la mejora de un programa de análisis de señales; con ese fin, se hará uso de técnicas de optimización del software y de tecnologías de aceleración, mediante el aprovechamiento del paralelismo del programa. Además se hará un análisis de acerca del uso de dos tecnologías basadas en diferentes paradigmas de programación paralela; una mediante múltiples hilos con memoria compartida y la otra mediante el uso de GPUs como dispositivos de coprocesamiento. This paper will talk about the development of a Project to improve a program that does signals analysis; to that end, it will make use of software optimization techniques and acceleration technologies by exploiting parallelism in the program. In Addition will be done an analysis on the use of two technologies based on two different paradigms; one using multiple threads with shared memory and the other using GPU as co-processing devices.

Approximate Relational Reasoning for Probabilistic Programs

La seguridad verificada es una metodología para demostrar propiedades de seguridad de los sistemas informáticos que se destaca por las altas garantías de corrección que provee. Los sistemas informáticos se modelan como programas probabilísticos y para probar que verifican una determinada propiedad de seguridad se utilizan técnicas rigurosas basadas en modelos matemáticos de los programas. En particular, la seguridad verificada promueve el uso de demostradores de teoremas interactivos o automáticos para construir demostraciones completamente formales cuya corrección es certificada mecánicamente (por ordenador). La seguridad verificada demostró ser una técnica muy efectiva para razonar sobre diversas nociones de seguridad en el área de criptografía. Sin embargo, no ha podido cubrir un importante conjunto de nociones de seguridad “aproximada”. La característica distintiva de estas nociones de seguridad es que se expresan como una condición de “similitud” entre las distribuciones de salida de dos programas probabilísticos y esta similitud se cuantifica usando alguna noción de distancia entre distribuciones de probabilidad. Este conjunto incluye destacadas nociones de seguridad de diversas áreas como la minería de datos privados, el análisis de flujo de información y la criptografía. Ejemplos representativos de estas nociones de seguridad son la indiferenciabilidad, que permite reemplazar un componente idealizado de un sistema por una implementación concreta (sin alterar significativamente sus propiedades de seguridad), o la privacidad diferencial, una noción de privacidad que ha recibido mucha atención en los últimos años y tiene como objetivo evitar la publicación datos confidenciales en la minería de datos. La falta de técnicas rigurosas que permitan verificar formalmente este tipo de propiedades constituye un notable problema abierto que tiene que ser abordado. En esta tesis introducimos varias lógicas de programa quantitativas para razonar sobre esta clase de propiedades de seguridad. Nuestra principal contribución teórica es una versión quantitativa de una lógica de Hoare relacional para programas probabilísticos. Las pruebas de correción de estas lógicas son completamente formalizadas en el asistente de pruebas Coq. Desarrollamos, además, una herramienta para razonar sobre propiedades de programas a través de estas lógicas extendiendo CertiCrypt, un framework para verificar pruebas de criptografía en Coq. Confirmamos la efectividad y aplicabilidad de nuestra metodología construyendo pruebas certificadas por ordendor de varios sistemas cuyo análisis estaba fuera del alcance de la seguridad verificada. Esto incluye, entre otros, una meta-construcción para diseñar funciones de hash “seguras” sobre curvas elípticas y algoritmos diferencialmente privados para varios problemas de optimización combinatoria de la literatura reciente. ABSTRACT The verified security methodology is an emerging approach to build high assurance proofs about security properties of computer systems. Computer systems are modeled as probabilistic programs and one relies on rigorous program semantics techniques to prove that they comply with a given security goal. In particular, it advocates the use of interactive theorem provers or automated provers to build fully formal machine-checked versions of these security proofs. The verified security methodology has proved successful in modeling and reasoning about several standard security notions in the area of cryptography. However, it has fallen short of covering an important class of approximate, quantitative security notions. The distinguishing characteristic of this class of security notions is that they are stated as a “similarity” condition between the output distributions of two probabilistic programs, and this similarity is quantified using some notion of distance between probability distributions. This class comprises prominent security notions from multiple areas such as private data analysis, information flow analysis and cryptography. These include, for instance, indifferentiability, which enables securely replacing an idealized component of system with a concrete implementation, and differential privacy, a notion of privacy-preserving data mining that has received a great deal of attention in the last few years. The lack of rigorous techniques for verifying these properties is thus an important problem that needs to be addressed. In this dissertation we introduce several quantitative program logics to reason about this class of security notions. Our main theoretical contribution is, in particular, a quantitative variant of a full-fledged relational Hoare logic for probabilistic programs. The soundness of these logics is fully formalized in the Coq proof-assistant and tool support is also available through an extension of CertiCrypt, a framework to verify cryptographic proofs in Coq. We validate the applicability of our approach by building fully machine-checked proofs for several systems that were out of the reach of the verified security methodology. These comprise, among others, a construction to build “safe” hash functions into elliptic curves and differentially private algorithms for several combinatorial optimization problems from the recent literature.

MultiPARTES: Multicore Virtualization for Mixed-Criticality Systems

Modern embedded applications typically integrate a multitude of functionalities with potentially different criticality levels into a single system. Without appropriate preconditions, the integration of mixed-criticality subsystems can lead to a significant and potentially unacceptable increase of engineering and certification costs. A promising solution is to incorporate mechanisms that establish multiple partitions with strict temporal and spatial separation between the individual partitions. In this approach, subsystems with different levels of criticality can be placed in different partitions and can be verified and validated in isolation. The MultiPARTES FP7 project aims at supporting mixed- criticality integration for embedded systems based on virtualization techniques for heterogeneous multicore processors. A major outcome of the project is the MultiPARTES XtratuM, an open source hypervisor designed as a generic virtualization layer for heterogeneous multicore. MultiPARTES evaluates the developed technology through selected use cases from the offshore wind power, space, visual surveillance, and automotive domains. The impact of MultiPARTES on the targeted domains will be also discussed. In a number of ongoing research initiatives (e.g., RECOMP, ARAMIS, MultiPARTES, CERTAINTY) mixed-criticality integration is considered in multicore processors. Key challenges are the combination of software virtualization and hardware segregation and the extension of partitioning mechanisms to jointly address significant non-functional requirements (e.g., time, energy and power budgets, adaptivity, reliability, safety, security, volume, weight, etc.) along with development and certification methodology.

Correlación de medidas de diversos sistemas de sensores inalámbricos a través del uso de smartphone

Este Proyecto Fin de Grado se centra en la definición de unos interfaces y el desarrollo de unos módulos que los ofrezcan y que permitan desarrollar un sistema para Smartphone mediante el que se puedan obtener medidas tanto de dispositivos biométricos como de una red inalámbrica de sensores (WSN – Wireless Sensor Network). Estos dos tipos de medidas deben poder ser mostradas de manera que se observe gráficamente su correlación espacio-temporal. Por tanto, estos interfaces ofrecen, principalmente, la posibilidad de gestionar un número indeterminado de dispositivos biométricos y tomar medidas de ellos, además de mecanismos de almacenamiento para dichas medidas. También existe la posibilidad de crear una representación gráfica de dichas medidas. Por último, se desarrolla un interfaz para obtener información proveniente de una red de sensores inalámbricos instalada en un determinado entorno en el cual el usuario estará realizando sus propias medidas. Además, se lleva a cabo la creación de la aplicación comentada, que hace uso de las interfaces especificadas, para realizar la correlación de las medidas. La aplicación permite al usuario mantener una lista de dispositivos, pudiendo consultar los parámetros de configuración de los mismos y tomar las medidas de aquellos que desee. Podrá visualizar en todo momento las medidas que se van realizando, y, por último, podrá representarlas gráficamente en pantalla. Los interfaces están creados de forma que sean flexibles de modo que puedan añadirse nuevas funciones en un futuro y permitan ser utilizados para diferentes aplicaciones. Los módulos que ofrecen estos interfaces están desarrollados para cumplir todas las funcionalidades que esperamos llevar a cabo en la aplicación creada. ABSTRACT. This Final Degree Project is focused on the definition of a set of interfaces, together with the implementation of the modules that comply with them, with the aim of creating a smartphone-based system to obtain measurements from both biometric devices and a wireless sensor network (WSN). These two types of measurements have to be graphically shown in order to observe their spatial and temporal correlation. Thus, the main purpose of the aforementioned interfaces is to manage an indeterminate number of biometric devices in order to obtain and store the measurements provided by them. There is also the possibility of creating a graphical representation of the data. In addition to all this, an interface has been developed for obtaining the information coming from a wireless sensor network deployed in the area where the user is taking his/her measurements. Also as part of the work performed, the smartphone application that utilizes the specified interfaces has been implemented, in order to actually perform the measurements correlation. This application allows the user to maintain the biometric devices list and control their configuration, including the activation of the measurements taking process. These data can be visualized anytime and, moreover, they can be represented graphically in the smartphone screen. The design of the interfaces is flexible in the sense that new functionality may be easily added to them in the future and new applications with different purposes may make use of them. The modules implemented as part of this Final Degree Project have been developed in order to comply with all the requirements of the smartphone system described above.

Nonlinear models for lateral dynamics of railway vehicles on bridges subject to wind action

The study of lateral dynamics of running trains on bridges is of importance mainly for the safety of the traffic, and may be relevant for laterally compliant bridges. These studies require threedimensional coupled vehicle-bridge models, wheree consideration of wheel to rail contact is a key aspect. Furthermore, an adequate evaluation of safety of rail traffic requires nonlinear models. A nonlinear coupled model is proposed here for vehicle-structure vertical and lateral dynamics. Vehicles are considered as fully three-dimensional multibody systems including gyroscopic terms and large rotation effects. The bridge structure is modeled by means of finite elements which may be of beam, shell or continuum type and may include geometric or material nonlinearities. The track geometry includes distributed track alignment irregularities. Both subsystems (bridge and vehicles) are described with coordinates in absolute reference frames, as opposed to alternative approaches which describe the multibody system with coordinates relative to the base bridge motion. The wheelrail contact employed is a semi-Hertzian model based on realistic wheel-rail profiles. It allows a detailed geometrical description of the contact patch under each wheel including multiple-point contact, flange contact and uplift. Normal and tangential stresses in each contact are integrated at each time-step to obtain the resultant contact forces. The models have been implemented within an existing finite element analysis software with multibody capabilities, Abaqus (Simulia Ltd., 2010). Further details of the model are presented in Antolín et al. (2012). Representative applications are presented for railway vehicles under lateral wind action on laterally compliant viaducts, showing the relevance of the nonlinear wheel-rail contact model as well as the interaction between bridge and vehicle.

A computer formulation for the analysis on continuous non prismatic folded plate structures of arbitrary cross-section

A computer solution to analyze nonprismatic folded plate structures is shown. Arbitrary cross-sections (simple and multiple), continuity over intermediate supports and general loading and longitudinal boundary conditions are dealt with. The folded plates are assumed to be straight and long (beam like structures) and some simplifications are introduced in order to reduce the computational effort. The formulation here presented may be very suitable to be used in the bridge deck analysis.