Release of potassium from rock powder by the yeast Torulaspora globosa

The alteration of minerals in rocks and the availability of elements for plant nutrition require long periods of time, and microorganisms are thought to induce the release of potassium and phosphate from rocks. In this context, this work evaluates the role of the yeast Torulaspora globosa, isolated from the sugar cane rhizosphere, in the solubilization of potassium from alkaline ultramafic rock powder. The experiments were performed in liquid medium, with or without agitation, at 30°C with the following treatments: culture medium + alkaline ultramafic; culture medium + yeast suspension; and culture medium + yeast suspension + alkaline ultramafic. The results showed that as much as 38% of the total potassium in the rock was released in the medium with the yeast during a 15-day period of incubation. Acid production may be the mechanism by which the yeast solubilizes potassium because the total acidity increased during the sampling period. Agitation (which increased oxygen availability) resulted in approximately 20% more biosolubilization of the alkaline ultramafic rock than with the static culture. These data indicate the potential for this yeast in biosolubilization processes and biofertilizer production.

Fruit quality of 'Tahiti' lime (Citrus latifolia Tanak) grafted on twelve different rootstocks

No presente trabalho, avaliou-se a influência de doze porta-enxertos sobre a qualidade dos frutos da lima-ácida 'Tahiti' (Citrus latifolia Tanaka), clone 'IAC-5', amostrados em duas posições nas plantas, em experimento conduzido na Estação de Citricultura de Bebedouro, em um pomar de três anos. O espaçamento utilizado foi de 8.0 x 5.0m. Os porta-enxertos utilizados foram: citrangeiro 'Carrizo' (C. sinensis (L.) Osbeck x Poncirus trifoliata (L.) Raf.); os híbridos 'Cravo' x 'Swingle' (C. limonia Osbeck x P. trifoliata (L.) Raf. x C. paradisi Macf.) e 'Changsha' x 'English Small' (C. sunki Hort. ex Tan. x P. trifoliata Raf.); as tangerineiras 'Sun Chu Sha Kat' (C. reticulata Blanco) e 'Sunki' (C. sunki Hort. ex Tanaka); os limoeiros 'Cravo Limeira' e 'Cravo FCAV' (C. limonia Osbeck); o citrumeleiro 'Swingle' (P. trifoliata Raf. x C. paradisi Macf.), o tangeleiro 'Orlando' (C. reticulata Blanco x C. paradisi Macf.) e os trifoliateiros 'Rubidoux', 'FCAV' e 'Flying Dragon' (Poncirus trifoliata Raf.). Foi utilizado um delineamento em blocos casualizados, com doze tratamentos e seis repetições. Os distintos porta-enxertos induziram diferenças na qualidade dos frutos, entretanto todas as características de qualidade foram consideradas aceitáveis para a variedade, sendo bons substitutos para o limão 'Cravo'.

Comparison between freeze and spray drying to obtain powder Rubrivivax gelatinosus biomass

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cultivar affects browning susceptibility of freshly cut star fruit slices

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of Ca-PZT powder obtained by the Pechini and partial oxalate methods

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Water adsorption isotherms and isosteric sorption heat of spray-dried and freeze-dried dehydrated passion fruit pulp with additives and skimmed milk

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On Ti-18Si-6B and Ti-7.5Si-22.5B powder alloys prepared by high-energy ball milling and sintering

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of ball-milled low purity boron powder on the superconductivity of MgB2

MgB2 samples were prepared using as-supplied commercial 96% boron with strong crystalline phase and the same 96% boron (B) after ball milling. The effects of the properties of the starting B powder on the superconductivity were evaluated. We observed that samples using ball-milled 96% B, in comparison with the one made from the as-supplied 96% B, were character- ized by small grain size, broadened full width at half maximum (FWHM), and enhanced magnetic critical current density (J(c)). J(c) reached 2 x 10(3) Acm(-2) at 5 K and 8 T. The improved pinning of these samples seems to be caused by enhanced grain boundary pinning at high field.

Activity of pectinmethylesterase, pectin content and vitamin C in acerola fruit at various stages of fruit development

In order to know which stage of fruit development is better for acerola industrialization, we studied the PME specific activity, pectin content and vitamin C at various stages of development. The acerola fruits were classified according to colour and weight in five stages: immature green (2.62-3.21 g), green (4.04-4.83 g), mature green/yellow (5.03-5.88 g), pale-red (6.16-6.77 g) and ripe mature (6.92-8.37 g). The results showed that the highest content of pectin and vitamin C occurred at the immature green stage, 4.51 +/- 0.1% yield, 2424 mg/100 g of pulp and decreased as fruit ripened, 2.99 +/- 0.03% yield, 957 +/- 0.0 mg/100 g of pulp, respectively. However, at the same stages, the values of PME specific activity were lowest, 0.61 +/- 0.01 and 0.55 +/- 0.0 units g(-1)/g of pulp, respectively. The highest value of PME activity was 2.08 +/- 0.01 units g(-1)/g of pulp in the green stage. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

Synthesis and sintering of ZrO2-CeO2 powder by use of polymeric precursor based on Pechini process

Nanocrystalline ZrO2-12 mol % CeO2 powders were synthesized using a polymeric precursor method based on the Pechini process. X-ray diffraction (XRD) patterns showed that the method was effective to synthesize tetragonal zirconia single-phase. The mean crystallite size attained ranges from 6 to 15 nm. The BET surface areas were relatively high reaching 97 m(2)/g. Studies by nitrogen adsorption/desorption on powders, dilatometry of the compacts, and transmission electron microscopy (TEM) of the powders, were also developed to verify the particles agglomeration state. Both citric acid : ethylene glycol ratio and calcination temperature affected the powder morphology, which influenced the sinterability and microstructure of the sintered material, as showed by scanning electron microscopy (SEM). (C) 2001 Kluwer Academic Publishers.

Metallic powder injection molding using low pressure

The demand by high performance materials that have to support severe service conditions at a reasonable cost has been forcing the powder metallurgy to improve constantly. The most recent and more important innovation in the area is the process of powder injection.Powder injection molding (PIM) is a technology capable of producing a new range of components from powders. This advanced technology overcomes the existent limitations in the forming of products with complex geometry. The process presents countless variations which are used in the industry today. Invariably, it consists of mixing the powders and a thermo-plastic binder, injecting the mass in the mold in the wanted form, debinding, sintering and making optional secondary operations, as for example, machinery.The purpose of this work is to review the metal injection molding techniques and apply the low pressure injection molding process to family of parts using metallic powder with 10 mum particle size. This work also comments the design and construction of a low pressure injection machine and injection molds. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Effects of powder preparation and sintering procedure on microstructure and dielectric properties of PLZT ceramics

PLZT ceramics belong to one of the very important groups of functional materials that make a basis for the production of a large range of electronic devices. The microstructure and properties of ceramics depend on the powder preparation and thermal processing conditions. Various techniques have been used to obtain chemically homogeneous and fine starting powders. PLZT powders have been prepared by two different production routes: by a modified Pechini method, using a polymeric precursor method (PMM) and by a partial oxalate method. A two-step sintering process, including a hot pressing, was carried out at 1100 and 1200degreesC Distinct phases obtained during the sintering process have been investigated by SEM and EDS techniques and dielectric properties such as permittivity and dielectric loss were measured in a frequency range from 1 to 20 kHz.. A significant difference in microstructure and dielectric properties, depending on powder origin and sintering procedure, has been noticed.

SYNTHESIS OF ULTRA-FINE CRYSTALLINE ZRXTI1-XO4 POWDER BY POLYMERIC PRECURSOR METHOD

Reactive ZrxTi1-xO4 (x=0.65, 0.50 and 0.35) powder was prepared by the polymeric precursor method. Studies by X-ray diffraction (XRD), nitrogen adsorption/desorption, and thermogravimetric analysis (TG) showed that powders with high crystallinity (>90%) and high surface areas (>40 m(2)/g) are obtained after calcination at 700 degrees C for 3 h. Infrared spectroscopy and XRD results showed that these titanates nucleate from the amorphous phase with no intermediate phases, at low temperature (450 degrees C).

Visible PL phenomenon at room temperature in disordered structure of SrWO4 powder

The SrWO4 (SWO) powders were synthesized by the polymeric precursor method and annealed at different temperatures. The SWO structure was obtained by X-ray diffraction and the corresponding photoluminescence (PL) spectra was measured. The PL results reveal that the structural order-disorder degree in the SWO lattice influences in the PL emission intensity. Only the structurally order-disordered samples present broad and intense PL band in the visible range. To understand the origin of this phenomenon, we performed quantum-mechanical calculations with crystalline and order-disordered SWO periodic models. Their electronic structures were analyzed in terms of band structure. The appearance of localized levels in the band gap of the order-disordered structure was evidenced and is a favorable condition for the intense PL to occur.