A reduced load approximation accounting for link interactions in a loss network

This paper is concerned with evaluating the performance of loss networks. Accurate determination of loss network performance can assist in the design and dimen- sioning of telecommunications networks. However, exact determination can be difficult and generally cannot be done in reasonable time. For these reasons there is much interest in developing fast and accurate approximations. We develop a reduced load approximation that improves on the famous Erlang fixed point approximation (EFPA) in a variety of circumstances. We illustrate our results with reference to a range of networks for which the EFPA may be expected to perform badly.

Mental time travel in animals?

Are humans alone in their ability to reminisce about the past and imagine the future? Recent evidence suggests that food-storing birds (scrub jays) have access to information about what they have stored where and when. This has raised the possibility of mental time travel (MTT) in animals and sparked similar research with other species. Here we caution that such data do not provide convincing evidence for MTT. Examination of characteristics of human MTT (e.g. non-verbal declaration, generativity, developmental prerequisites) points to other avenues as to how a case for animal MTT could be made. In light of the current lack of evidence, however, we maintain that MTT is a uniquely human characteristic.

Effect of time of harvest of budded virus on the selection of baculovirus FP mutants in cell culture

Rapid formation and selection of FP (few polyhedra) mutants occurs during serial passaging of Helicoverpa armigera nucleopolyhedrovirus (HaSNPV) in insect cell culture. The production of HaSNPV for use as biopesticides requires the passaging of the virus over a number of passages to produce enough virus inoculum for large-scale fermentation. During serial passaging in cell culture, FP mutants were rapidly selected, resulting in declined productivity and reduced potency of virus. Budded virus (BV) is usually harvested between 72 and 96 h postinfection (hpi) in order to obtain a high titer virus stock. In this study, the effect of tine of harvest (TOH) for BV on the selection rate of HaSNPV FP mutants during serial passaging was investigated. BV were harvested at different times postinfection, and each series was serially passaged for six passages. The productivity and percentage of FP mutants at each passage were determined. It was found that the selection of FP mutants can he reduced by employing an earlier TOH for BV. Serial passaging with BV harvested at 48 hpi showed a slower accumulation of FP mutants compared to that of BV harvested after 48 hpi. Higher cell specific yields were also maintained when BV were harvested at 48 hpi. When BV that were formed between 48 and 96 hpi were harvested and serially passaged, FP mutants quickly dominated the virus population. This suggests that the V formed and released between 48 and 96 hpi are most likely from FP mutant infected cells.

Dryout phenomena in a three-phase fixed-bed reactor

Understanding the mechanism of liquid-phase evaporation in a three-phase fixed-bed reactor is of practical importance, because the reaction heat is usually 7-10 times the vaporization heat of the liquid components. Evaporation, especially the liquid dryout, can largely influence the reactor performance and even safety. To predict the vanishing condition of the liquid phase, Raoult's law was applied as a preliminary approach, with the liquid vanishing temperature defined based on a liquid flow rate of zero. While providing correct trends, Raoult's law exhibits some limitation in explaining the temperature profile in the reactor. To comprehensively understand the whole process of liquid evaporation, a set of experiments on inlet temperature, catalyst activity, liquid flow rate, gas flow rate, and operation pressure were carried out. A liquid-region length-predicting equation is suggested based on these experiments and the principle of heat balance.

Investigation of the vapor-phase grafting of styrene onto PFA

Poly(tetrafluoroethylene-co-perfluoropropyI vinyl ether), PFA, was grafted with styrene from the vapor phase using a simultaneous radiation grafting method. The graft yields were measured as a function of the dose and dose rate and were found to be initially linearly dependent on the dose and independent of the dose rate up to dose rates of similar to3 kGy/h. However, at a dose rate of 6.2 kGy/h, the slope of the yield-grafting time plot decreased. Raman depth profiles of the grafts showed that the polystyrene concentrations were greatest near the surface of the grafted samples and decreased with depth. The maximum penetration depth of the graft depended on the radiation dose for a fixed dose rate. Fmoc-Rink loading tests showed that the grafts displayed superior loading compared to grafts prepared from bulk styrene or from styrene solutions other than methanol.

O sentido de ser professor de Educação Física pelos “modos de ser sendo junto ao outro no mundo” perverso- fascista e democrático: a vivência real & no filme “Má Educação”

Quais são os “modos de ser sendo junto ao outro no mundo” professores de Educação Física da Prefeitura Municipal da Serra, ES, situados no que se denomina “real” e do professor de Educação Física padre José no filme “Má Educação” de Pedro Almodóvar situado no que se denomina “ficcional”? Que contribuições reflexivas podem trazer tais dados (analisados hermeneuticamente) para a Formação Continuada de professores de Educação Física [3]? OBJETIVO: Descrever os “modos de ser sendo junto ao outro no mundo” de [1] professores de Educação Física que trabalham em escolas públicas da Prefeitura Municipal da Serra, ES & do [2] padre José, personagem ficcional, professor de Educação Física no filme espanhol de 2004 “Má Educação” fazendo-o primeiramente através de uma pesquisa clássica (descritiva e hermenêutica) e depois uma literaturalizada e artística (hermenêutica). MARCO TEÓRICO: Trata-se de uma proposta discursiva (teórica) fenomenológica existencial de tendência marxista criada por Pinel; METODOLOGIA: Tratou-se de uma pesquisa fenomenológica existencial seguindo recomendações de Forghieri (2001) e Pinel (2006; 2012) - dentre outros. Os 29 professores de Educação Física foram provocados a mostrarem os seus “modos de ser sendo junto ao outro no mundo” do ofício professor de Educação Física. Depois essa mesma provocação foi feita ao personagem do filme. RESULTADOS & DISCUSSÃO: Descreveram-se [1] os “modos de ser sendo junto ao outro no mundo” dos professores de Educação Física na dimensão do real e do ficcional (cinema), e não se objetivou comparação por mais que isso tenha ficado evidente. Esses professores, em 2011/2012, experienciando uma democracia (im)perfeita brasileira [que tem até tendências neofascistas], mais ainda assim democracia - foram compreendidos sempre tomando um norte/ rumo/ direção em subjetivação pelos Guias de Sentido (GS – Pinel) democráticos reconhecimento [demanda do grupo em ser valorizado, reconhecido], em (im) potência [impotência e potencia possível de vir a lume sempre; a força e seu outro lado, a fragilidade de ser], afetando [o que se pratica e pensa/sente afeta a si mesmo, o outro e o mundo; o afetar produz mais subjetivações], sonhando [há demanda sempre de realizar projetos de vida; o projeto de ser sempre devir, em construção sempre; é uma precisão imprecisa], saudavelmente insano [o quão perto pode estar a experienciar a sanidade e a loucura e o quanto uma loucura é sã, pois criativa, inventiva, produtiva, opositora ao estabelecido] – eles mesmos junto ao outro no mundo tornando-se sujeitos. [2] Já o professor de Educação Física padre José da película almodovariana é um professor que de imediato pode ser apreendido como sólido e fixo na sua perversão fascista, ele como parte legitimadora do Estado espanhol de Franco, na década de 60, provavelmente em 1964, que é, na ficção, o espaço-tempo de José e suas ações pedagógicas e psicológicas (e de Educação Física). Mas não é apenas o fascismo que torna o fascista um criador de um cotidiano fascista, pois afinal, paralelamente a ele, no concreto e na ficção, haviam pessoas generosas, resistentes e resilientes que atuavam contra essas pressões quase na maioria das vezes advindas do todo (Estado) – eram pessoas democráticas individualmente e em pequenos e grandes grupos; eram exemplo de resistência contra o estabelecido pela ideologia dominante de então. José numa instituição fascista não conseguiu refletir e agir diferentemente, isto é, com mais saúde mental, escolhendo (na liberdade) ser fascista, ser menor (pouco) – optou não ser-mais. Finalmente os mesmos dados são apresentados em outra estética possível e sempre aberta, inconclusa, devir... As artes e a poesia (bem como a literatura) procuram cuidadosamente desvelar os “modos de ser junto ao outro no mundo” professor de Educação Física do mundo real e do imaginário (fílmico) desvelando muitas vezes indissociados. PÓSCRITO: O autor descreve as possíveis implicações do seu estudo para educação física pautado sempre em uma proposta de criar um discursso insubmisso focando na ideia de que uma pesquisa demanda narrar a vida, e literaturalizar a ciência.

Uma contribuição experimental aos fundamentos da propagação de uma frente de combustão em meio poroso

A propagação de uma frente de combustão ocorre numa variedade de situações e para diferentes propósitos industriais. O desempenho desses processos precisa melhorar e ao mesmo tempo reduzir os níveis de emissões para atender às normas de emissões internacionais. Para isso é necessário um certo grau de conhecimento tanto do processo como dos fenômenos da combustão. Em todos as situações envolvendo a combustão, a propagação é iniciada por uma fonte de calor e, após a ignição do combustível, a frente de combustão alcança o combustível adjacente. Estudos anteriores mostraram a ignição e propagação de uma frente de combustão como um fenômeno complexo que depende de processos químicos, térmicos e físicos. O presente trabalho abordou os desafios encontrados durante uma abordagem empírica para análise da propagação de uma frente de combustão em leito fixo. A partir da utilização de combustíveis simulados foram analisados: a influência da composição do combustível no comportamento da ignição do mesmo, as características da propagação da frente de combustão (regime de combustão, retração do leito e estrutura da frente) e a influência da ignição do combustível na propagação da frente de combustão. Foi possível realizar um mapeamento, para diferentes composições, do comportamento da ignição de combustíveis sólidos. A partir dos resultados de propagação da frente verificou-se que ocorrem basicamente três estágios de combustão no leito: ignição, propagação e oxidação do carbono fixo remanescente. Através das análises de gás notou-se a existência de dois regimes de combustão no leito: limitada pela reação e limitada pelo oxigênio. Foi obtido que em leitos com alta porcentagem de material inerte, onde há maior estabilidade, há uma maior influência da ignição na frente de combustão. Assim, mostrou-se como esses conhecimentos são úteis em diversas aplicações e processos industriais.

Contradiction between the average age of retirement at the time of death and the average pension time for men and women in public employment in Portugal

The short article attempts to make some very brief reflections on the effects a lack of public policies positively discriminatory in terms of public employment retirement. In particular, the observation of the absurd contradiction between the average age of retirement at the time of death (for men and women) and the average pension time for men and women in public employment in Portugal.

Collecting system percutaneous access using real-time tracking sensors: first pig model in vivo experience

Purpose: Precise needle puncture of the renal collecting system is an essential but challenging step for successful percutaneous nephrolithotomy. We evaluated the efficiency of a new real-time electromagnetic tracking system for in vivo kidney puncture. Materials and Methods: Six anesthetized female pigs underwent ureterorenoscopy to place a catheter with an electromagnetic tracking sensor into the desired puncture site and ascertain puncture success. A tracked needle with a similar electromagnetic tracking sensor was subsequently navigated into the sensor in the catheter. Four punctures were performed by each of 2 surgeons in each pig, including 1 each in the kidney, middle ureter, and right and left sides. Outcome measurements were the number of attempts and the time needed to evaluate the virtual trajectory and perform percutaneous puncture. Results: A total of 24 punctures were easily performed without complication. Surgeons required more time to evaluate the trajectory during ureteral than kidney puncture (median 15 seconds, range 14 to 18 vs 13, range 11 to 16, p ¼ 0.1). Median renal and ureteral puncture time was 19 (range 14 to 45) and 51 seconds (range 45 to 67), respectively (p ¼ 0.003). Two attempts were needed to achieve a successful ureteral puncture. The technique requires the presence of a renal stone for testing. Conclusions: The proposed electromagnetic tracking solution for renal collecting system puncture proved to be highly accurate, simple and quick. This method might represent a paradigm shift in percutaneous kidney access techniques

Real-time 3D interactive segmentation of echocardiographic data through user-based deformation of B-spline explicit active surfaces

Image segmentation is an ubiquitous task in medical image analysis, which is required to estimate morphological or functional properties of given anatomical targets. While automatic processing is highly desirable, image segmentation remains to date a supervised process in daily clinical practice. Indeed, challenging data often requires user interaction to capture the required level of anatomical detail. To optimize the analysis of 3D images, the user should be able to efficiently interact with the result of any segmentation algorithm to correct any possible disagreement. Building on a previously developed real-time 3D segmentation algorithm, we propose in the present work an extension towards an interactive application where user information can be used online to steer the segmentation result. This enables a synergistic collaboration between the operator and the underlying segmentation algorithm, thus contributing to higher segmentation accuracy, while keeping total analysis time competitive. To this end, we formalize the user interaction paradigm using a geometrical approach, where the user input is mapped to a non-cartesian space while this information is used to drive the boundary towards the position provided by the user. Additionally, we propose a shape regularization term which improves the interaction with the segmented surface, thereby making the interactive segmentation process less cumbersome. The resulting algorithm offers competitive performance both in terms of segmentation accuracy, as well as in terms of total analysis time. This contributes to a more efficient use of the existing segmentation tools in daily clinical practice. Furthermore, it compares favorably to state-of-the-art interactive segmentation software based on a 3D livewire-based algorithm.

Collecting system percutaneous access using real-time tracking sensors: first pig model in vivo experience

Purpose: Precise needle puncture of the renal collecting system is an essential but challenging step for successful percutaneous nephrolithotomy. We evaluated the efficiency of a new real-time electromagnetic tracking system for in vivo kidney puncture. Materials and Methods: Six anesthetized female pigs underwent ureterorenoscopy to place a catheter with an electromagnetic tracking sensor into the desired puncture site and ascertain puncture success. A tracked needle with a similar electromagnetic tracking sensor was subsequently navigated into the sensor in the catheter. Four punctures were performed by each of 2 surgeons in each pig, including 1 each in the kidney, middle ureter, and right and left sides. Outcome measurements were the number of attempts and the time needed to evaluate the virtual trajectory and perform percutaneous puncture. Results: A total of 24 punctures were easily performed without complication. Surgeons required more time to evaluate the trajectory during ureteral than kidney puncture (median 15 seconds, range 14 to 18 vs 13, range 11 to 16, p ¼ 0.1). Median renal and ureteral puncture time was 19 (range 14 to 45) and 51 seconds (range 45 to 67), respectively (p ¼ 0.003). Two attempts were needed to achieve a successful ureteral puncture. The technique requires the presence of a renal stone for testing. Conclusions: The proposed electromagnetic tracking solution for renal collecting system puncture proved to be highly accurate, simple and quick. This method might represent a paradigm shift in percutaneous kidney access techniques.

Preliminary clinical trial in percutaneous nephrolithotomy using a real-time navigation system for percutaneous kidney access

Background: Precise needle puncture of renal calyces is a challenging and essential step for successful percutaneous nephrolithotomy. This work tests and evaluates, through a clinical trial, a real-time navigation system to plan and guide percutaneous kidney puncture. Methods: A novel system, entitled i3DPuncture, was developed to aid surgeons in establishing the desired puncture site and the best virtual puncture trajectory, by gathering and processing data from a tracked needle with optical passive markers. In order to navigate and superimpose the needle to a preoperative volume, the patient, 3D image data and tracker system were previously registered intraoperatively using seven points that were strategically chosen based on rigid bone structures and nearby kidney area. In addition, relevant anatomical structures for surgical navigation were automatically segmented using a multi-organ segmentation algorithm that clusters volumes based on statistical properties and minimum description length criterion. For each cluster, a rendering transfer function enhanced the visualization of different organs and surrounding tissues. Results: One puncture attempt was sufficient to achieve a successful kidney puncture. The puncture took 265 seconds, and 32 seconds were necessary to plan the puncture trajectory. The virtual puncture path was followed correctively until the needle tip reached the desired kidney calyceal. Conclusions: This new solution provided spatial information regarding the needle inside the body and the possibility to visualize surrounding organs. It may offer a promising and innovative solution for percutaneous punctures.

Real-time hand tracking for rehabilitation and character animation

Hand and finger tracking has a major importance in healthcare, for rehabilitation of hand function required due to a neurological disorder, and in virtual environment applications, like characters animation for on-line games or movies. Current solutions consist mostly of motion tracking gloves with embedded resistive bend sensors that most often suffer from signal drift, sensor saturation, sensor displacement and complex calibration procedures. More advanced solutions provide better tracking stability, but at the expense of a higher cost. The proposed solution aims to provide the required precision, stability and feasibility through the combination of eleven inertial measurements units (IMUs). Each unit captures the spatial orientation of the attached body. To fully capture the hand movement, each finger encompasses two units (at the proximal and distal phalanges), plus one unit at the back of the hand. The proposed glove was validated in two distinct steps: a) evaluation of the sensors’ accuracy and stability over time; b) evaluation of the bending trajectories during usual finger flexion tasks based on the intra-class correlation coefficient (ICC). Results revealed that the glove was sensitive mainly to magnetic field distortions and sensors tuning. The inclusion of a hard and soft iron correction algorithm and accelerometer and gyro drift and temperature compensation methods provided increased stability and precision. Finger trajectories evaluation yielded high ICC values with an overall reliability within application’s satisfying limits. The developed low cost system provides a straightforward calibration and usability, qualifying the device for hand and finger tracking in healthcare and animation industries.

Residents’ perceptions on impacts of hosting the “Guimarães 2012 European Capital of Culture”: comparisons of the pre-and post-2012 ECOC

The nomination of Guimarães, a small city located in the northwest of Portugal, as European capital of culture (ECOC) in 2012 raised great expectations in the local community towards its socio-economic and cultural benefits. As noted by various authors, namely Kim and Petrick (2005), Kim, Gursoy and Lee (2006) and Gursoy, Chi, Ai and Chen (2011), residents tend to have high expectations about the benefits of hosting a mega-event, although they tend to recognize that some costs will result from it. Therefore, the present research was designed to examine the Guimarães residents’ perceptions on the impacts of the 2012 European capital of culture (2012 ECOC) on the city and the municipality of Guimarães before and after the mega-event and the differences found between the two time periods.