Desempenho térmico de coberturas: Um estudo comparativo entre as telhas de material reciclado, de fibra e betume, fibrocimento e cerâmica

This study aims to compare the thermal performance of tiles made from recycled material (waste packaging cardboard with aluminized film) with the tiles of fiber and bitumen, fiber cement and red ceramic with the aim of verifying the suitability of tile to be used in hot and humid climate of low latitude. The samples were selected according to the availability from Natal - RN market, as they are sold to the consumers. The methodology was based on studies that used experimental apparatus composed of thermal chambers heated by banks of incandescent bulbs, to analyze the thermal performance of materials. The tiles in the study were submitted to analysis of thermal performance, thermophysical properties and absorptance, using chambers of thermal performance, measuring the thermophysical properties and portable spectrometer, respectively. Comparative analysis of thermal performance between two samples of the recycled material with dimple sizes and different amounts of aluminum were made, in order to verify, if these characteristics had some interference on the thermal performance of them; the results showed no significant performance differences between the samples. The data obtained in chambers of thermal performance and confirmed by statistical analysis, showed, that the tile of recycled material have similar thermal performance to the tile of fiber cement. In addition to these tests was carried out the automatic monitoring of a building covered with tiles of recycled material, to verify its thermal performance in a real situation. The results showed that recycled shingles must be used with technical criteria similar to those used for fiber cement tiles, with regard to the heat gain into the building. Within these criteria should be taken into account local characteristics, especially in regions with hot and humid climate, and its use must be associated, according to the literature, to elements of thermal insulation and use of passive techniques such as vented attics, ceilings and right foot higher

Estudo comparativo de pás para aerogeradores de grande porte fabricadas em materiais compósitos reforçadas com fibra de carbono ou fibra de vidro

The research and development of wind turbine blades are essential to keep pace with worldwide growth in the renewable energy sector. Although currently blades are typically produced using glass fiber reinforced composite materials, the tendency for larger size blades, particularly for offshore applications, has increased the interest on carbon fiber reinforced composites because of the potential for increased stiffness and weight reduction. In this study a model of blade designed for large generators (5 MW) was studied on a small scale. A numerical simulation was performed to determine the aerodynamic loading using a Computational Fluid Dynamics (CFD) software. Two blades were then designed and manufactured using epoxy matrix composites: one reinforced with glass fibers and the other with carbon fibers. For the structural calculations, maximum stress failure criterion was adopted. The blades were manufactured by Vacuum Assisted Resin Transfer Molding (VARTM), typical for this type of component. A weight comparison of the two blades was performed and the weight of the carbon fiber blade was approximately 45% of the weight of the fiberglass reinforced blade. Static bending tests were carried out on the blades for various percentages of the design load and deflections measurements were compared with the values obtained from finite element simulations. A good agreement was observed between the measured and calculated deflections. In summary, the results of this study confirm that the low density combined with high mechanical properties of carbon fibers are particularly attractive for the production of large size wind turbine blades

Estudo da potencialidade da incorporação de resíduo de granito e da queima da casca do café em cerâmica vermelha

The industrial production of ornamental rocks and the burning of coffee husk generate waste that is discarded into the environment. However, with the study of the incorporation of these residues in ceramic products, may be found an alternative to reducing environmental impacts and detrimental effects on human health caused by its indiscriminate disposal of waste in nature. Thus, this work aimed to study the addition of ashes of the coffee husk and granite residue in matrix of red ceramic. The raw materials were dry milled and sieved to mesh 100. To characterize the raw materials were carried out analyzes of X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis (PSA), differential thermal analysis (DTA) and thermogravimetric analysis (TG). Six formulations were prepared where the clay content was kept constant (70%wt) and ashes contents and granite residue varied from 10, 15, 20 and 30%. Dilatometrics analyzes were performed at four selected formulations, containing them: 100% clay (A100); 70% clay and 30% ashes (A70C30); 70% clay and 30% granite residue (A70G30); and 70% clay, 15% granite residue and 15% ashes (A70G15C15). The samples were prepared by uniaxial compaction with pressure of 25 MPa, and fired at temperatures of 800°C, 850ºC, 900ºC, 950ºC, 1000ºC and 1100°C. Assays were performed to determine the linear shrinkage of burning (LSB), water absorption (WA), apparent porosity (AP), density (D) and tensile bending. Also were performed analyzes of X-ray diffraction (XRD) and scanning electron microscopy (SEM) of the samples fired. The formulations incorporating granite residue and/or ashes reached the required limits of water absorption according to NBR 15270-1 and NBR 15310 and tensile bending according to classical literature (SANTOS, 1989) necessary for the production of tiles and ceramic block for masonry sealing

Adição de subprodutos da cinza da casca de café (coffea canephora) em massa cerâmica para porcelanato

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

Efeito da adição do poli(etileno acrilato de metila) (ema) e da fibra de linter de algodão nas propriedades do poli(tereftalato de etileno) reciclado (petrec)

The development of new materials to fill the demand of technological advances is a challenge for many researchers around the world. Strategies such as making blends and composites are promising alternatives to produce materials with different properties from those found in conventional polymers. The objective of this study is to evaluate the effect of adding the copolymer poly(ethylene methyl acrylate) (EMA) and cotton linter fibers (LB) on the properties of recycled poly(ethylene terephthalate) (PETrec) by the development of PETrec/EMA blend and PETrec/EMA/LB blend composite. In order to improve the properties of these materials were added as compatibilizers: Ethylene - methyl acrylate - glycidyl methacrylate terpolymer (EMA-GMA) and maleic anhydride grafted polyethylene (PE-g-MA). The samples were produced using a single screw extruder and then injection molded. The obtained materials were characterized by thermogravimetry (TG), melt flow index (MFI) mensurements, torque rheometry, pycnometry to determinate the density, tensile testing and scanning electron microscopy (SEM). The rheological results showed that the addition of the EMA copolymer increased the viscosity of the blend and LB reduces the viscosity of the blend composite. SEM analysis of the binary blend showed poor interfacial adhesion between the PETrec matrix and the EMA dispersed phase, as well as the blend composite of PETrec/EMA/LB also observed low adhesion with the LB fiber. The tensile tests showed that the increase of EMA percentage decreased the tensile strength and the Young s modulus, also lower EMA percentage samples had increased the elongation at break. The blend composite showed an increase in the tensile strength and in the Young`s modulus, and a decrease in the elongation at break. The blend formulations with lower EMA percentages showed better mechanical properties that agree with the particle size analysis which showed that these formulations presented a smaller diameter of the dispersed phase. The blend composite mechanical tests showed that this material is stronger and stiffer than the blend PETrec/EMA, whose properties have been reduced due to the presence of EMA rubbery phase. The use of EMA-GMA was effective in reducing the particle size of the EMA dispersed phase in the PETrec/EMA blend and PE-g-MA showed evidences of reaction with LB and physical mixture with the EMA

Desenvolvimento e caracterização de compósito a partir da borra da piaçava para construção da parábola de um fogão solar a concentração

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Análisis comparativo entre el concreto simple y el concreto con adición de fibra de acero al 12% y 14%.

55 p.

Análisis de las propiedades mecánicas de un concreto convencional adicionando fibra de cáñamo

84 p.

Rehidratación post-ejercicio con agua de coco: ¿igual o más efectiva que una bebida deportiva?

Objetivo: comparar la efectividad rehidratante del agua de coco fresca, con el agua embotellada y una bebida deportiva.Metodología: once participantes de 22,0 ± 1,9 años y 65,6 ± 13,0 kg de masa corporal (promedio ± D.E), asistieron al laboratorio en tres ocasiones, separadas entre sí por una semana. En cada sesión se deshidrataron por ejercicio en el calor hasta perder 1,84 ± 0,2% de la masa corporal. Luego fueron rehidratados en una hora, con agua comercial embotellada (AE), una bebida deportiva (BD) o agua de coco (AC), utilizando un volumen equivalente al 120% del peso perdido. Se evaluaron las sensaciones percibidas relacionadas con la tolerancia y la aceptación de las bebidas. Se recolectó la orina eliminada durante tres horas post-rehidratación.Resultados: Hubo interacción entre las bebidas y el tiempo sobre la orina excretada (p=0,003), siendo el AE estadísticamente diferente al AC y la BD a los 30 y 60 min post-rehidratación (p<0,05). El volumen total de orina fue mayor con agua embotellada (625 ± 183 mL), en comparación con AC y BD (390 ± 73 mL y 416 ± 200 mL, respectivamente, p<0,002); AC y BD no fueron distintas entre sí (p>0,05). Esto produjo porcentajes de conservación de líquido diferentes para AE (56%), con respecto a BD (71%) y AC (71%) (p<0,001). No hubo interacción entre las bebidas y el tiempo sobre las sensaciones percibidas de tolerancia (p>0,05).La percepción de la dulzura fue menor para AE (p= 0,024). BD obtuvo mejores puntajes de sabor y aceptación general (p<0,05).Conclusiones: el agua de coco fresca resulta tan efectiva como una bebida deportiva para conservar el líquido consumido, teniendo una buena tolerancia y aceptación. Podría ser usada como una bebida rehidratante, cuando la persona la tenga disponible y le agrade su sabor.

Reutilização de solução extratora na determinação de fibra em detergente neutro e fibra em detergente ácido.

2006

Adsorção de cobre e cromo utilizando fibra de sisal visando o tratamento da água produzida pela indústria petrolífera

Currently, the oil industry is the biggest cause of environmental pollution. The objective was to reduce the concentration of copper and chromium in the water produced by the oil industry. It was used as adsorbent natural sisal fiber Agave sp treated with nitric acid and sodium hydroxide. All vegetable fibers have physical and morphological properties that enablies the adsorption of pollutants. The basic composition of sisal is cellulose, hemicellulose and lignin. The features are typically found in the characterization of vegetable fibers, except the surface area that was practically zero. In the first stage of adsorption, it was evaluated the effect of temperature and time skeeking to optimize the execution of the factorial design. The results showed that the most feasible fiber was the one treated with acid in five hours (30°C). The second phase was a factorial design, using acid and five hours, this time was it determined in the first phase. The tests were conducted following the experimental design and the results were analyzed by statistical methods in order to optimize the main parameters that influence the process: pH, concentration (mol / L) and fiber mass/ metal solution volume. The volume / mass ratio factor showed significant interference in the adsorption process of chromium and copper. The results obtained after optimization showed that the highest percentages of extraction (98%) were obtained on the following operating conditions: pH: 5-6, Concentration: 100 ppm and mass/ volume: 1 gram of fiber/50mL solution. The results showed that the adsorption process was efficient to remove chromium and copper using sisal fibers, however, requiring further studies to optimize the process.

Produção agroecológica de mudas de maracujá em substratos a base de húmus de minhoca e casca de arroz carbonizada.

2014

Novas linhagens de algodoeiro herbáceo com coloração na fibra.

No Brasil, o programa de melhoramento visando obtenção de cultivares com fibras coloridas foi iniciado pela Embrapa Algodão em meados da década de 1990 e até o presente momento já foram lançadas seis cultivares. Excetuando-se a BR 200, a primeira a ser desenvolvida e descendente de uma espécie de algodoeiro arbóreo (G. hirsutum L. r. marie galante Hutch.) as demais são de espécies de algodoeiro herbáceo (G. hirsutum L. r. latifolium Hutch.) e descendem do cruzamento de germoplasma de fibra colorida introduzido com germoplasma de fibra branca e adaptado ao cultivo na região Nordeste. Entre as cultivares desenvolvidas, há uma com fibra na cor verde e as demais possuem fibra marrom em diferentes tonalidades. Por outro lado, a espécie G. barbadense L. possui acessos silvestres com cores diferentes daquelas de G. hirsutum L., tais como lilás e marrom púrpura, além de outras. Há alguns anos a Embrapa Algodão vem trabalhando com estes materiais. Assim, o objetivo deste ?documento? é apresentar os resultados obtidos utilizando esta espécie com doadora de cores na fibra. O programa de melhoramento do algodão de fibra colorida da Embrapa objetiva a obtenção de cultivares com novas tonalidades de cores utilizando métodos convencionais de melhoramento.

Lecture by Coco Fusco, given at Florida International University, November 3, 2006

Coco Fusco performs. Her performance includes multimedia and closed circuit tv and focuses on the role of women at Guantanamo Bay and their interactions with detainees.

Atitudes da população portuguesa em relação à fibra alimentar

Introdução: A fibra dietética (FD) tem feito parte da dieta humana desde há milénios, embora os seus benefícios tenham sido reconhecidos, principalmente, nas últimas décadas. Objetivos: Porque a FD é um componente importante de uma dieta saudável, o objetivo deste trabalho foi avaliar os hábitos de consumo dos Portugueses, bem como o seu conhecimento sobre os alimentos ricos em fibras e as suas atitudes em relação à rotulagem dos alimentos. Métodos: Foi realizado um estudo descritivo transversal usando uma amostra não-probabilística de 382 participantes. Resultados: Os resultados mostraram que a ingestão de alimentos ricos em fibras, como frutas, vegetais e cereais, foi muito menor do que a ingestão recomendada. Os resultados também indicaram que a maioria das pessoas não presta a atenção desejada à rotulagem de alimentos ou à informação nutricional. Conclusões: O nível geral de conhecimento sobre FD foi considerado insatisfatório, e, portanto, é necessário mais educação nutricional e desenvolver esforços para informar as pessoas acerca da importância da FD como parte da sua dieta diária.