An Evaluation of 1D Design Methods for the Off-Design Performance Prediction of Automotive Turbocharger Compressors

Several one-dimensional design methods have been used to predict the off-design performance of three modern centrifugal compressors for automotive turbocharging. The three methods used are single-zone, two-zone, and a more recent statistical method. The predicted results from each method are compared against empirical data taken from standard hot gas stand tests for each turbocharger. Each of the automotive turbochargers considered in this study have notably different geometries and are of varying application. Due to the non-adiabatic test conditions, the empirical data has been corrected for the effect of heat transfer to ensure comparability with the 1D models. Each method is evaluated for usability and accuracy in both pressure ratio and efficiency prediction. The paper presents an insight into the limitations of each of these models when applied to one-dimensional automotive turbocharger design, and proposes that a corrected single-zone modelling approach has the greatest potential for further development, whilst the statistical method could be immediately introduced to a design process where design variations are limited.

Investigation of Utilizing Single Surface Depressions in Optimization of NLF Aerofoil Design

An environment has been created for the optimisation of aerofoil profiles with inclusion of small surface features. For TS wave dominated flows, the paper examines the consequences of the addition of a depression on the aerodynamic optimisation of an NLF aerofoil, and describes the geometry definition fidelity and optimisation algorithm employed in the development process. The variables that define the depression for this optimisation investigation have been fixed, however a preliminary study is presented demonstrating the sensitivity of the flow to the depression characteristics. Solutions to the optimisation problem are then presented using both gradient-based and genetic algorithm techniques, and for accurate representation of the inclusion of small surface perturbations it is concluded that a global optimisation method is required for this type of aerofoil optimisation task due to the nature of the response surface generated. When dealing with surface features, changes in the transition onset are likely to be of a non-linear nature so it is highly critical to have an optimisation algorithm that is robust, suggesting that for this framework, gradient-based methods alone are not suited.

A realistic evaluation of track and trigger systems and acute care training for early recognition and treatment of deteriorating ward-based patients: research protocol.

Aim The aim of the study is to evaluate factors that enable or constrain the implementation and service delivery of early warnings systems or acute care training in practice. Background To date there is limited evidence to support the effectiveness of acute care initiatives (early warning systems, acute care training, outreach) in reducing the number of adverse events (cardiac arrest, death, unanticipated Intensive Care admission) through increased recognition and management of deteriorating ward based patients in hospital [1-3]. The reasons posited are that previous research primarily focused on measuring patient outcomes following the implementation of an intervention or programme without considering the social factors (the organisation, the people, external influences) which may have affected the process of implementation and hence measured end-points. Further research which considers the social processes is required in order to understand why a programme works, or does not work, in particular circumstances [4]. Method The design is a multiple case study approach of four general wards in two acute hospitals where Early Warning Systems (EWS) and Acute Life-threatening Events Recognition and Treatment (ALERT) course have been implemented. Various methods are being used to collect data about individual capacities, interpersonal relationships and institutional balance and infrastructures in order to understand the intended and unintended process outcomes of implementing EWS and ALERT in practice. This information will be gathered from individual and focus group interviews with key participants (ALERT facilitators, nursing and medical ALERT instructors, ward managers, doctors, ward nurses and health care assistants from each hospital); non-participant observation of ward organisation and structure; audit of patients' EWS charts and audit of the medical notes of patients who deteriorated during the study period to ascertain whether ALERT principles were followed. Discussion & progress to date This study commenced in January 2007. Ethical approval has been granted and data collection is ongoing with interviews being conducted with key stakeholders. The findings from this study will provide evidence for policy-makers to make informed decisions regarding the direction for strategic and service planning of acute care services to improve the level of care provided to acutely ill patients in hospital. References 1. Esmonde L, McDonnell A, Ball C, Waskett C, Morgan R, Rashidain A et al. Investigating the effectiveness of Critical Care Outreach Services: A systematic review. Intensive Care Medicine 2006; 32: 1713-1721 2. McGaughey J, Alderdice F, Fowler R, Kapila A, Mayhew A, Moutray M. Outreach and Early Warning Systems for the prevention of Intensive Care admission and death of critically ill patients on general hospital wards. Cochrane Database of Systematic Reviews 2007, Issue 3. www.thecochranelibrary.com 3. Winters BD, Pham JC, Hunt EA, Guallar E, Berenholtz S, Pronovost PJ (2007) Rapid Response Systems: A systematic review. Critical Care Medicine 2007; 35 (5): 1238-43 4. Pawson R and Tilley N. Realistic Evaluation. London; Sage: 1997

Cancer dormancy: a model of early dissemination and late cancer recurrence

Cancer dormancy is a stage in tumor progression in which residual disease remains occult and asymptomatic for a prolonged period of time. Dormant tumor cells can be present as one of the earliest stages in tumor development, as well as a stage in micrometastases, and/or minimal residual disease left after an apparently successful treatment of the primary tumor. The general mechanisms that regulate the transition of disseminated tumor cells that have lain dormant into a proliferative state remain largely unknown. However, regulation of the growth from dormant tumor cells may be explained in part through the interaction of the tumor cell with its microenvironment, limitations in the blood supply, or an active immune system. An understanding of the regulatory machinery of these processes is essential for identifying early cancer biomarkers and could provide a rationale for the development of novel agents to target dormant tumor cells. This review focuses on the different signaling models responsible for early cancer dissemination and tumor recurrence that are involved in dormancy pathways.

The application of early contractor involvement and its impact on project performance

Early contractor involvement is a topic that has attracted attention from construction practitioners and researchers in the UK since the 1990s. It has been adopted to introduce construction knowledge and experience to the design process, and to integrate design with construction. In contrast with the limited number of previous studies on early contractor involvement, which used case studies, a questionnaire survey was conducted in this study, to investigate the application of early contractor involvement in current practice and its impact on project performance in terms of time, cost and quality. From an analysis of the questionnaire results, early contractor involvement is found to be increasingly used in the construction industry, and to have a significant impact on cost and time performance. This research provides empirical evidence related to the practice of early contractor involvement. It demonstrates the major influence of early contractor involvement on management processes and working relationships during a project, which contribute to performance improvement and project success.

The prognostic and therapeutic value of EpHA2 in early colorectal cancer (CRC).

Background: EpHA2 is a 130 kD transmembrane glycoprotein belonging to ephrin receptor subfamily and involved in angiogenesis/tumour neovascularisation. High EpHA2 mRNA level has recently been implicated in cetuximab resistance. Previously, we found high EpHA2 levels in a panel of invasive colorectal cancer (CRC) cells, which was associated with high levels of stem-cell marker CD44. Our aim was to investigate the prognostic value of EpHA2 and subsequently correlate expression levels to known clinico-pathological variables in early stage CRC. Methods: Tissue samples from 509 CRC patients were analysed. EpHA2 expression was measured using IHC. Kaplan-Meier graphs were used. Univariate and multivariate analyses employed Cox Proportional Hazards Ratio (HR) method. A backward selection method (Akaike’s information criterion) was used to determine a refined multivariate model. Results: EpHA2 was highly expressed in CRC adenocarcinoma compared to matched normal colon tissue. In support of our preclinical invasive models, strong correlation was found between EpHA2 expression and CD44 and Lgr5 staining (p<0.001). In addition, high EpHA2 expression significantly correlated with vascular invasion (p=0.03).HR for OS for stage II/III patients with high EpHA2 expression was 1.69 (95%CI: 1.164-2.439; p=0.003). When stage II/III was broken down into individual stages, there was significant correlation between high EpHA2 expression and poor 5-years OS in stage II patients (HR: 2.18; 95%CI: 1.28-3.71; p=0.005).HR in the stage III group showed a trend to statistical significance (HR: 1.48; 95%CI=0.87-2.51; p=0.05). In both univariate and multivariate analyses of stage II patients, high EpHA2 expression was the only significant factor and was retained in the final multivariate model. Higher levels of EpHA2 were noted in our RAS and BRAF mutant CRC cells, and silencing EpHA2 resulted in significant decreases in migration/invasion in parental and invasive CRC sublines. Correlation between KRAS/NRAS/BRAFmutational status and EpHA2 expression in clinical samples is ongoing. Conclusions: Taken together, our study is the first to indicate that EpHA2 expression is a predictor of poor clinical outcome and a potential novel target in early stage CRC.

Early assessment of visual acuity after cataract surgery in rural Indonesia.

BACKGROUND: The accuracy and impact on service uptake of early examination after cataract surgery is not known. DESIGN:   Prospective cohort study. PARTICIPANTS: Cataract patients in rural Indonesia. METHODS: Visual acuity was measured preoperatively, 1day, 1-3, 4-6 and >12weeks after surgery, and 6-8months postoperatively at an outreach examination. Acceptance of second-eye surgery and spectacles was evaluated. MAIN OUTCOME MEASURE: Presenting visual acuity in the operated eye. RESULTS: Among 241 subjects (extracapsular surgery 84%), examinations at 1day, 1-3, 4-6 and >12weeks and 6-8months were completed for 100% (241), 90.9% (219), 67.6% (163), 22.0% (53) and 80.0% (193), respectively. Among subjects at the final examination (mean age 65.8±10.6years, 51.8% male), 73.6% had bilateral preoperative presenting visual acuity≤6/60. By 4-6weeks, the proportion with good (≥6/18) or poor (≤6/60) visual acuity did not differ significantly from the final examination. Among 49 persons accepting free second-eye surgery, 69.4% (34) and 16.3% (8) returned to clinic at 4-6 and >12weeks, respectively. Among 131 patients (67.9%) paying US$7 for glasses, 94 (71.8%) and 30 (22.9%) attended 4- to 6- and >12-week examinations, respectively. CONCLUSION: Even with large-incision surgery, early assessment of postoperative vision is representative of final vision, and may help deliver postoperative services to more of those needing them. © 2011 The Authors. Clinical and Experimental Ophthalmology © 2011 Royal Australian and New Zealand College of Ophthalmologists.

The influence of substrate texture on early biological colonization

Biological colonization of stone is a major concern in the preservation and presentation of cultural heritage. Colonization is typically associated with unpleasant soiling, and varying degrees of biodeterioration. A better understanding of why organisms grow where they do, will aid in
developing preventative, and treatment methods for biosoiling of cultural heritage. Sandstone exposure trials were set up at nine different locations across Northern Ireland to investigate the influences of local climate, local environmental,and micro-climatic factors on the early stages (up to 21 months) of biological colonization.
Results showed that, green and yellow soiling occurred on tooled stone surfaces, whereas darkening occurred preferentially on smooth surfaces. It is likely that different populations of organisms occur on these surfaces with green algae occurring on tooled surfaces due to slower drying rates (i.e. prolonged moisture retention), and cyanobacteria and fungi thriving on smooth surfaces due to their ability to withstand moisture fluctuation.

Práticas de gestão do design para o subsetor nacional de cerâmica utilitária e decorativa

O campo de análise do estudo compreende o subsetor de cerâmica utilitária e decorativa (CUD) nacional. Nesse contexto, o estudo analisa o papel atual do designer e propõe novas estratégias de gestão do design, como ferramentas estratégicas potenciadoras de inovação e de valor acrescentado, para o produto e para o desenvolvimento da empresa. A pertinência da investigação justifica-se pela necessidade premente da reestruturação estratégica das empresas do setor face ao cenário da crise atual. Os dados mais recentes disponibilizados do subsetor indicam que, de 2002 para 2008, encerraram 36,6% das empresas, o número de trabalhadores reduziu-se em 36,8% e o volume de negócios decresceu 32%. Acrescenta-se ainda que, do ano de 2008 para 2012, encerraram 15% das empresas da amostra. Pretende-se com este estudo não só definir o estado atual da arte e do subsetor mas, ir mais além, procurando respostas aos problemas detetados, através de ferramentas estratégicas para a gestão do design integrado nas estratégias de imagem, comercialização e produção. O estudo compreendeu as seguintes etapas: pesquisa, análise de dados e desenvolvimento dos resultados. A etapa da pesquisa correspondeu à recolha da documentação disponível para o contexto do subsetor e da gestão do design apresentado no estado da arte; a pesquisa de campo a seleção de empresas da amostra onde se realizaram questionários (em 2008 e 2012) e entrevistas (em 2008) no universo amostra. Na análise de dados, estes foram apresentados e analisados de forma quantitativa e qualitativa (com recurso a lugares estruturais e a palavras-chave) e relacionados com o estado de arte e desenvolvimento de resultados. A última etapa, desenvolvimento dos resultados, traduz-se pela idealização e construção de ferramentas sob a perspetiva da gestão do design nas empresas: em checklists da definição do trabalho do designer e da integração do designer nas estratégias de gestão do design, aplicadas ao subsetor; na definição das estratégias vigentes na amostra; na sugestão de uma estratégia de gestão de design direcionada para o subsetor e de planos de ação concordantes com a estratégia sugerida. A novidade do estudo está presente nas propostas de ferramentas estratégicas, onde se define o trabalho do designer, enuncia estratégias de gestão do design direcionadas ao subsetor, define campos de integração do designer nessas estratégias, caracteriza-se a aplicabilidade de práticas de gestão do design e sugere-se uma estratégia e planos de ação para aplicar ao subsetor de CUD. De modo a facilitar a aplicação da investigação e da análise aqui realizada, redigiu-se um manual de estratégias de gestão do design – Cerâmica design mais – para disponibilizar e apresentar futuramente ao subsetor e a todos os interessados no tema.

Embarcações tradicionais da Ria de Aveiro: uma análise pelo design

Perante o estado de perda de grande parte do património móvel, material e imaterial, lagunar, e da consequente desvalorização identitária da região, nomeadamente, das embarcações tradicionais da Ria de Aveiro, surgiu a necessidade de efectuar um levantamento desse património e de o caracterizar. Para tal, delimitamos o estudo no espaço e no tempo. O território abrange a grande área lagunar do Distrito de Aveiro, denominada de Ria de Aveiro, com uma extensão de cerca de 47km, de norte a sul - de Ovar a Mira - incluindo as lagoas adjacentes: Barrinha de Mira, Lagoa e a Pateira de Fermentelos. No tempo, marcamos como referência, o início do século XIX até à actualidade. A partir do ano de 1808, a laguna adquire uma configuração morfológica, perto da actual e condições de navegabilidade estáveis para as embarcações tradicionais, devido à fixação da Barra do Porto de Aveiro. Após realizar as primeiras pesquisas, apoiados em fontes bibliográficas, iconográficas e videográficas apercebemo-nos da dispersão da informação existente e das poucas obras que abordam o tema. Desta forma, sentiu-se a necessidade de realizar uma pesquisa de campo, que contextualizasse e aportasse informação pertinente ao tema em estudo. Iniciamos a pesquisa de campo, utilizando as técnicas da observação passiva e activa, e do registo de imagem, vídeo, áudio e gráfico. Realizamos entrevistas, assistimos a processos de construção, efectuamos levantamentos e anotações de medidas, elaboramos esquissos de pormenores, apoiados nas ferramentas da Etnografia e do Design e participamos em eventos ligados à temática. Realizamos um levantamento das embarcações existentes, localizando-as e contextualizando-as no território regional. Descrevemo-las, analisamos a sua forma, função, estética, e o processo construtivo, e com base na análise de outros trabalhos, apresentamos uma proposta classificativa, por tipologias, para as embarcações tradicionais da Ria de Aveiro. Com base na comparação dos desenhos das embarcações procuramos alguns marcadores genéticos comuns, caracterizadores e transmissores da identidade do nosso património lagunar. Recolhemos, observámos e procuramos entender a problemática subjacente a este tema. Por fim, elaboramos um ensaio conclusivo sobre essa problemática da perda do património lagunar móvel, na contemporaneidade, classificando-o, e obtendo resultados que nos elucidam sobre a actual situação, e anunciam uma previsão futura de perda total, caso não se registem urgentes intervenções estratégicas para minimizar e travar esta realidade.

Cimentos de fosfato de magnésio: consolidação e caracterização

A reação entre o óxido de magnésio (MgO) e o fosfato de monoamónio (MAP), à temperatura ambiente, origina os cimentos de fosfato de magnésio, materiais caracterizados pela sua presa rápida e pelas excelentes propriedades mecânicas adquiridas precocemente. As propriedades finais são dependentes, essencialmente, da composição do cimento (razão molar magnésia:fosfato e utilização de retardantes de presa) mas também são influenciadas pela reatividade da magnésia utilizada. Neste trabalho, a reação foi caracterizada através do estudo da influência da razão molar MgO:MAP (variando de 1:1 até 8:1), da presença e teor de aditivos retardantes (ácido bórico, ácido cítrico e tripolifosfato de sódio) e da variação da área superficial específica da magnésia (conseguida por calcinação do óxido), no tempo de presa, na temperatura máxima atingida e nas fases cristalinas finais formadas. A reação de presa pode ser comparada à hidratação do cimento Portland, com a existência de 4 estágios (reação inicial, indução, aceleração e desaceleração), com a diferença que estes estágios ocorrem a velocidade muito mais alta nos cimentos de fosfato de magnésio. Este estudo foi realizado utilizando a espetroscopia de impedâncias, acompanhada pela monitorização da evolução de temperatura ao longo do tempo de reação e, por paragem de reação, identificando as fases cristalinas formadas. A investigação do mecanismo de reação foi complementada com a observação da microestrutura dos cimentos formados e permitiu concluir que a origem da magnésia usada não afeta a reação nem as propriedades do cimento final. A metodologia de superfície de resposta foi utilizada para o estudo e otimização das características finais do produto, tendo-se mostrado um método muito eficaz. Para o estudo da variação da área superficial específica da magnésia com as condições de calcinação (temperatura e tempo de patamar) usou-se o planeamento fatorial de experiências tendo sido obtido um modelo matemático que relaciona a resposta da área superficial específica da magnésia com as condições de calcinação. As propriedades finais dos cimentos (resistência mecânica à compressão e absorção de água) foram estudadas utilizando o planeamento simplex de experiências, que permitiu encontrar modelos que relacionam a propriedade em estudo com os valores das variáveis (razão molar MgO:MAP, área superficial específica da magnésia e quantidade de ácido bórico). Estes modelos podem ser usados para formular composições e produzir cimentos com propriedades finais específicas.

Eliciting Security Requirements and Tracing them to Design: An Integration of Common Criteria, Heuristics, and UMLsec

Building secure systems is difficult for many reasons. This paper deals with two of the main challenges: (i) the lack of security expertise in development teams, and (ii) the inadequacy of existing methodologies to support developers who are not security experts. The security standard ISO 14508 (Common Criteria) together with secure design techniques such as UMLsec can provide the security expertise, knowledge, and guidelines that are needed. However, security expertise and guidelines are not stated explicitly in the Common Criteria. They are rather phrased in security domain terminology and difficult to understand for developers. This means that some general security and secure design expertise are required to fully take advantage of the Common Criteria and UMLsec. In addition, there is the problem of tracing security requirements and objectives into solution design,which is needed for proof of requirements fulfilment. This paper describes a security requirements engineering methodology called SecReq. SecReq combines three techniques: the Common Criteria, the heuristic requirements editorHeRA, andUMLsec. SecReqmakes systematic use of the security engineering knowledge contained in the Common Criteria and UMLsec, as well as security-related heuristics in the HeRA tool. The integrated SecReq method supports early detection of security-related issues (HeRA), their systematic refinement guided by the Common Criteria, and the ability to trace security requirements into UML design models. A feedback loop helps reusing experiencewithin SecReq and turns the approach into an iterative process for the secure system life-cycle, also in the presence of system evolution.

Crafting Modern Design in Italy, from Post-War to Postmodernism

The years between 1945 and the early 1980s are the most celebrated in Italy’s design history. From the rhetoric of reconstruction to the postmodern provocations of the Memphis design collective, Italy’s architects played a vital role in shaping the country’s encounter with post-war modernity. Yet as often as this story has been told, it is incomplete. Craft was vital to the realisation of post-war Italian design, and an area of intense creativity in its own right, and yet has been marginalised and excluded in design historiography.

Piñatex, the design development of a new sustainable material

This is a research project by practice, which firstly develops a new material invention derived from natural fibres extracted from waste pineapple leaves; secondly it articulates the contemporary designer’s role in facilitating sustainable solutions through: Insights from my own material invention, PiñatexTM, which integrates the materiality of design with the immateriality of concepts and values Developing a visual model of mapping I began with these questions: ‘What are the challenges in seeking to make a new and sustainable material from the waste products of pineapple agriculture in the Philippines?’ and ‘How can a design practice link elements of materiality (artifacts) with immaterial elements (value systems) in order to improve sustainable social and economic development?’ Significant influences have been the work of Papanek1 (2003), Hawken2 (1999) and Abouleish3 (2008) and in particular the ethical business model initiated by McDonough and Braungart in Cradle to Cradle®4 (2002). My own research project is inspired by the Cradle to Cradle® model. It proposes the development of a new material, PiñatexTM which is derived from natural fibres extracted from waste pineapple leaves and could be used in a wide variety of products that are currently fabricated in leather or petroleum-based materials. The methods have comprised: Contextual reviews; case studies (SEKEM, Cradle to Cradle® and Gawad Kalinga); practical experiments in the field of natural fibres, chemistry, product development, manufacturing and prototyping, leading to an invention and a theoretical model of mapping. In addition, collaboration has taken place across scientific, technological, social, ecological, academic and business fields. The outcome is a new material based on the synchronicity between the pineapple fibres, polymers, resins and coatings specially formulated. The invention of the new material that I developed as a central part of this research by practice has a patent in the national phase (PCT/GB 2011/000802) and is in the first stages of manufacturing, commercial testing and further design input (Summer 2014). The contribution to knowledge is firstly the material, PiñatexTM, which exhibits certain key qualities, namely environmentally non-toxic, biodegradable, income-generating potential and marketability. This is alongside its intrinsic qualities as a textile product: aesthetic potential, durability and stability, which will make it suitable for the accessories, interiors and furnishing markets. The theoretical mapping system Upstream and Downstream forms a secondary contribution.