Blast response and sensitivity analysis of segmental tunnel

This research treated the response of underground transportation tunnels to surface blast loads using advanced computer simulation techniques. The influences of important parameters, such as tunnel material, geometrical configuration of segments and surrounding soil were investigated. The findings of this research offer significant new information on the blast performance of underground tunnels and will contribute towards future civil engineering applications.

Building the safety case for UAS operations in support of natural disaster response

A framework supporting the systematic development of safety cases for Unmanned Aircraft System (UAS) operations in a broad range of civil and commercial applications is presented. The case study application is the use of UAS for disaster response. In those States where regulations do not preclude UAS operations altogether, approvals for UAS operations can be granted on a case-by-case basis contingent on the provision of a safety case acceptable to the relevant National Airworthiness Authority (NAA). A safety case for UAS operations must show how the risks associated with the hazards have been managed to an acceptable level. The foundational components necessary for structuring and assessing these safety cases have not yet been proposed. Barrier-bow-tie models are used in this paper to structure the safety case for the two primary hazards of 1) a ground impact, and 2) a Mid-Air Collision (MAC). The models establish the set of Risk Control Variables (RCVs) available to reduce the risk. For the ground-impact risk model, seven RCVs are identified which in combination govern the probability of an accident. Similarly, ten RCVs are identified within the MAC model. The effectiveness of the RCVs and how they can implemented in terms of processes, policies, devices, practices, or other actions for each of the case-study applications are discussed. The framework presented can provide for the more systematic and consistent regulation of UAS through a "safety target" approach.

A constitutive model for mechanical response characterization of pumpkin peel and flesh tissues under tensile and compressive loadings

Enhancing quality of food products and reducing volume of waste during mechanical operations of food industry requires a comprehensive knowledge of material response under loadings. While research has focused on mechanical response of food material, the volume of waste after harvesting and during processing stages is still considerably high in both developing and developed countries. This research aims to develop and evaluate a constitutive model of mechanical response of tough skinned vegetables under postharvest and processing operations. The model focuses on both tensile and compressive properties of pumpkin flesh and peel tissues where the behaviours of these tissues vary depending on various factors such as rheological response and cellular structure. Both elastic and plastic response of tissue were considered in the modelling process and finite elasticity combined with pseudo elasticity theory was applied to generate the model. The outcomes were then validated using the published results of experimental work on pumpkin flesh and peel under uniaxial tensile and compression. The constitutive coefficients for peel under tensile test was α = 25.66 and β = −18.48 Mpa and for flesh α = −5.29 and β = 5.27 Mpa. under compression the constitutive coefficients were α = 4.74 and β = −1.71 Mpa for peel and α = 0.76 and β = −1.86 Mpa for flesh samples. Constitutive curves predicted the values of force precisely and close to the experimental values. The curves were fit for whole stress versus strain curve as well as a section of curve up to bio yield point. The modelling outputs had presented good agreement with the empirical values and the constructive curves exhibited a very similar pattern to the experimental curves. The presented constitutive model can be applied next to other agricultural materials under loading in future.

Heartbeat and economic decisions : observing mental stress among proposers and responders in the ultimatum bargaining game

The ultimatum bargaining game (UBG), a widely used method in experimental economics, clearly demonstrates that motives other than pure monetary reward play a role in human economic decision making. In this study, we explore the behaviour and physiological reactions of both responders and proposers in an ultimatum bargaining game using heart rate variability (HRV), a small and nonintrusive technology that allows observation of both sides of an interaction in a normal experimental economics laboratory environment. We find that low offers by a proposer cause signs of mental stress in both the proposer and the responder; that is, both exhibit high ratios of low to high frequency activity in the HRV spectrum.

Differential effects of refractive blur on day and night-time driving performance

Purpose To investigate the effect of different levels of refractive blur on real-world driving performance measured under day and nighttime conditions. Methods Participants included 12 visually normal, young adults (mean age = 25.8 ± 5.2 years) who drove an instrumented research vehicle around a 4 km closed road circuit with three different levels of binocular spherical refractive blur (+0.50 diopter sphere [DS], +1.00 DS, +2.00 DS) compared with a baseline condition. The subjects wore optimal spherocylinder correction and the additional blur lenses were mounted in modified full-field goggles; the order of testing of the blur conditions was randomized. Driving performance was assessed in two different sessions under day and nighttime conditions and included measures of road signs recognized, hazard detection and avoidance, gap detection, lane-keeping, sign recognition distance, speed, and time to complete the course. Results Refractive blur and time of day had significant effects on driving performance (P < 0.05), where increasing blur and nighttime driving reduced performance on all driving tasks except gap judgment and lane keeping. There was also a significant interaction between blur and time of day (P < 0.05), such that the effects of blur were exacerbated under nighttime driving conditions; performance differences were evident even for +0.50 DS blur relative to baseline for some measures. Conclusions The effects of blur were greatest under nighttime conditions, even for levels of binocular refractive blur as low as +0.50 DS. These results emphasize the importance of accurate and up-to-date refractive correction of even low levels of refractive error when driving at night.

Spatially varying ground motion effects on seismic response of adjacent structures considering soil-structure interaction

Spatial variation of seismic ground motions is caused by incoherence effect, wave passage, and local site conditions. This study focuses on the effects of spatial variation of earthquake ground motion on the responses of adjacent reinforced concrete (RC) frame structures. The adjacent buildings are modeled considering soil-structure interaction (SSI) so that the buildings can be interacted with each other under uniform and non-uniform ground motions. Three different site classes are used to model the soil layers of SSI system. Based on fast Fourier transformation (FFT), spatially correlated non-uniform ground motions are generated compatible with known power spectrum density function (PSDF) at different locations. Numerical analyses are carried out to investigate the displacement responses and the absolute maximum base shear forces of adjacent structures subjected to spatially varying ground motions. The results are presented in terms of related parameters affecting the structural response using three different types of soil site classes. The responses of adjacent structures have changed remarkably due to spatial variation of ground motions. The effect can be significant on rock site rather than clay site.

Quantification of gammaH2AX foci in response to ionising radiation

DNA double-strand breaks (DSBs), which are induced by either endogenous metabolic processes or by exogenous sources, are one of the most critical DNA lesions with respect to survival and preservation of genomic integrity. An early response to the induction of DSBs is phosphorylation of the H2A histone variant, H2AX, at the serine-139 residue, in the highly conserved C-terminal SQEY motif, forming gammaH2AX(1). Following induction of DSBs, H2AX is rapidly phosphorylated by the phosphatidyl-inosito 3-kinase (PIKK) family of proteins, ataxia telangiectasia mutated (ATM), DNA-protein kinase catalytic subunit and ATM and RAD3-related (ATR)(2). Typically, only a few base-pairs (bp) are implicated in a DSB, however, there is significant signal amplification, given the importance of chromatin modifications in DNA damage signalling and repair. Phosphorylation of H2AX mediated predominantly by ATM spreads to adjacent areas of chromatin, affecting approximately 0.03% of total cellular H2AX per DSB(2,3). This corresponds to phosphorylation of approximately 2000 H2AX molecules spanning approximately 2 Mbp regions of chromatin surrounding the site of the DSB and results in the formation of discrete gammaH2AX foci which can be easily visualized and quantitated by immunofluorescence microscopy(2). The loss of gammaH2AX at DSB reflects repair, however, there is some controversy as to what defines complete repair of DSBs; it has been proposed that rejoining of both strands of DNA is adequate however, it has also been suggested that re-instatement of the original chromatin state of compaction is necessary(4-8). The disappearence of gammaH2AX involves at least in part, dephosphorylation by phosphatases, phosphatase 2A and phosphatase 4C(5,6). Further, removal of gammaH2AX by redistribution involving histone exchange with H2A.Z has been implicated(7,8). Importantly, the quantitative analysis of gammaH2AX foci has led to a wide range of applications in medical and nuclear research. Here, we demonstrate the most commonly used immunofluorescence method for evaluation of initial DNA damage by detection and quantitation of gammaH2AX foci in gamma-irradiated adherent human keratinocytes(9)

Observing privacy, modesty and hospitality in the home domain : three case studies of Muslim homes in Brisbane, Australia

A home embodies a sensorial space that is layered with personal memories and traces of history. The success of a home in providing a strong sense of place depends on various factors such as geographical location, climatic conditions, and occupants’ world-views and perceptions. This paper explores Muslims’ perceptions of privacy, modesty and hospitality within their homes through their lived experiences. This case study focuses on three Muslim families living in Australian designed homes within the same suburb of Brisbane, Australia. The study provides prefatory insight into the ways in which these families perform their daily activities and entertain their guests without jeopardizing their privacy needs. The study examines the significance of modesty in the design of Muslim homes as a means by which family members are able to achieve optimum privacy while simultaneously extending hospitality to guests inside and outside their homes. The findings of this study provide opportunities too, for expanding research into culturally adaptable housing systems to help meet the changing needs of Australian multicultural society.

Old mastheads and new media : newspapers striving to adapt in Australia and South-east Asia

As a key element in their response to new media forcing transformations in mass media and media use, newspapers have deployed various strategies to not only establish online and mobile products, and develop healthy business plans, but to set out to be dominant portals. Their response to change was the subject of an early investigation by one of the present authors (Keshvani 2000). That was part of a set of short studies inquiring into what impact new software applications and digital convergence might have on journalism practice (Tickle and Keshvani 2000), and also looking for demonstrations of the way that innovations, technologies and protocols then under development might produce a “wireless, streamlined electronic news production process (Tickle and Keshvani 2001).” The newspaper study compared the online products of The Age in Melbourne and the Straits Times in Singapore. It provided an audit of the Singapore and Australia Information and Communications Technology (ICT) climate concentrating on the state of development of carrier networks, as a determining factor in the potential strength of the two services with their respective markets. In the outcome, contrary to initial expectations, the early cable roll-out and extensive ‘wiring’ of the city in Singapore had not produced a level of uptake of Internet services as strong as that achieved in Melbourne by more ad hoc and varied strategies. By interpretation, while news websites and online content were at an early stage of development everywhere, and much the same as one another, no determining structural imbalance existed to separate these leading media participants in Australia and South-east Asia. The present research revisits that situation, by again studying the online editions of the two large newspapers in the original study, and one other, The Courier Mail, (recognising the diversification of types of product in this field, by including it as a representative of Newscorp, now a major participant). The inquiry works through the principle of comparison. It is an exercise in qualitative, empirical research that establishes a comparison between the situation in 2000 as described in the earlier work, and the situation in 2014, after a decade of intense development in digital technology affecting the media industries. It is in that sense a follow-up study on the earlier work, although this time giving emphasis to content and style of the actual products as experienced by their users. It compares the online and print editions of each of these three newspapers; then the three mastheads as print and online entities, among themselves; and finally it compares one against the other two, as representing a South-east Asian model and Australian models. This exercise is accompanied by a review of literature on the developments in ICT affecting media production and media organisations, to establish the changed context. The new study of the online editions is conducted as a systematic appraisal of the first level, or principal screens, of the three publications, over the course of six days (10-15.2.14 inclusive). For this, categories for analysis were made, through conducting a preliminary examination of the products over three days in the week before. That process identified significant elements of media production, such as: variegated sourcing of materials; randomness in the presentation of items; differential production values among media platforms considered, whether text, video or stills images; the occasional repurposing and repackaging of top news stories of the day and the presence of standard news values – once again drawn out of the trial ‘bundle’ of journalistic items. Reduced in this way the online artefacts become comparable with the companion print editions from the same days. The categories devised and then used in the appraisal of the online products have been adapted to print, to give the closest match of sets of variables. This device, to study the two sets of publications on like standards -- essentially production values and news values—has enabled the comparisons to be made. This comparing of the online and print editions of each of the three publications was set up as up the first step in the investigation. In recognition of the nature of the artefacts, as ones that carry very diverse information by subject and level of depth, and involve heavy creative investment in the formulation and presentation of the information; the assessment also includes an open section for interpreting and commenting on main points of comparison. This takes the form of a field for text, for the insertion of notes, in the table employed for summarising the features of each product, for each day. When the sets of comparisons as outlined above are noted, the process then becomes interpretative, guided by the notion of change. In the context of changing media technology and publication processes, what substantive alterations have taken place, in the overall effort of news organisations in the print and online fields since 2001; and in their print and online products separately? Have they diverged or continued along similar lines? The remaining task is to begin to make inferences from that. Will the examination of findings enforce the proposition that a review of the earlier study, and a forensic review of new models, does provide evidence of the character and content of change --especially change in journalistic products and practice? Will it permit an authoritative description on of the essentials of such change in products and practice? Will it permit generalisation, and provide a reliable base for discussion of the implications of change, and future prospects? Preliminary observations suggest a more dynamic and diversified product has been developed in Singapore, well themed, obviously sustained by public commitment and habituation to diversified online and mobile media services. The Australian products suggest a concentrated corporate and journalistic effort and deployment of resources, with a strong market focus, but less settled and ordered, and showing signs of limitations imposed by the delay in establishing a uniform, large broadband network. The scope of the study is limited. It is intended to test, and take advantage of the original study as evidentiary material from the early days of newspaper companies’ experimentation with online formats. Both are small studies. The key opportunity for discovery lies in the ‘time capsule’ factor; the availability of well-gathered and processed information on major newspaper company production, at the threshold of a transformational decade of change in their industry. The comparison stands to identify key changes. It should also be useful as a reference for further inquiries of the same kind that might be made, and for monitoring of the situation in regard to newspaper portals on line, into the future.

Characterization of acyl chain position in unsaturated phosphatidylcholines using differential mobility-mass spectrometry

Glycerophospholipids (GPs) that differ in the relative position of the two fatty acyl chains on the glycerol backbone (i.e., sn-positional isomers) can have distinct physicochemical properties. The unambiguous assignment of acyl chain position to an individual GP represents a significant analytical challenge. Here we describe a workflow where phosphatidylcholines (PCs) are subjected to ESI for characterization by a combination of differential mobility spectrometry and MS (DMS-MS). When infused as a mixture, ions formed from silver adduction of each phospholipid isomer {e.g., [PC (16:0/18:1) + Ag]+ and [PC (18:1/16:0) + Ag]+} are transmitted through the DMS device at discrete compensation voltages. Varying their relative amounts allows facile and unambiguous assignment of the sn-positions of the fatty acyl chains for each isomer. Integration of the well-resolved ion populations provides a rapid method (< 3 min) for relative quantification of these lipid isomers. The DMS-MS results show excellent agreement with established, but time-consuming, enzymatic approaches and also provide superior accuracy to methods that rely on MS alone. The advantages of this DMS-MS method in identification and quantification of GP isomer populations is demonstrated by direct analysis of complex biological extracts without any prior fractionation.

Natural convection due to differential heating of inclined walls and heat source placed on bottom wall of an attic shaped space

Numerical investigation of free convection heat transfer in an attic shaped enclosure with differentially heated two inclined walls and filled with air is performed in this study. The left inclined surface is uniformly heated whereas the right inclined surface is uniformly cooled. There is a heat source placed on the right side of the bottom surface. Rest of the bottom surface is kept as adiabatic. Finite volume based commercial software ANSYS 15 (Fluent) is used to solve the governing equations. Dependency of various flow parameters of fluid flow and heat transfer is analyzed including Rayleigh number, Ra ranging from 103 to 106, heater size from 0.2 to 0.6, heater position from 0.3 to 0.7 and aspect ratio from 0.2 to 1.0 with a fixed Prandtl number of 0.72. Outcomes have been reported in terms of temperature and stream function contours and local Nusselt number for various Ra, heater size, heater position, and aspect ratio. Grid sensitivity analysis is performed and numerically obtained results have been compared with those results available in the literature and found good agreement.

The use of a Riesz fractional differential-based approach for texture enhancement in image processing

Texture enhancement is an important component of image processing that finds extensive application in science and engineering. The quality of medical images, quantified using the imaging texture, plays a significant role in the routine diagnosis performed by medical practitioners. Most image texture enhancement is performed using classical integral order differential mask operators. Recently, first order fractional differential operators were used to enhance images. Experimentation with these methods led to the conclusion that fractional differential operators not only maintain the low frequency contour features in the smooth areas of the image, but they also nonlinearly enhance edges and textures corresponding to high frequency image components. However, whilst these methods perform well in particular cases, they are not routinely useful across all applications. To this end, we apply the second order Riesz fractional differential operator to improve upon existing approaches of texture enhancement. Compared with the classical integral order differential mask operators and other first order fractional differential operators, we find that our new algorithms provide higher signal to noise values and superior image quality.

A novel tuning method for advanced line drop compensator and its application to response coordination of distributed generation with voltage regulating devices

Nowadays, integration of small-scale electricity generators, known as Distributed Generation (DG), into distribution networks has become increasingly popular. This tendency together with the falling price of DG units has a great potential in giving the DG a better chance to participate in voltage regulation process, in parallel with other regulating devices already available in the distribution systems. The voltage control issue turns out to be a very challenging problem for distribution engineers, since existing control coordination schemes need to be reconsidered to take into account the DG operation. In this paper, a control coordination approach is proposed, which is able to utilize the ability of the DG as a voltage regulator, and at the same time minimize the interaction of DG with another DG or other active devices, such as On-load Tap Changing Transformer (OLTC). The proposed technique has been developed based on the concepts of protection principles (magnitude grading and time grading) for response coordination of DG and other regulating devices and uses Advanced Line Drop Compensators (ALDCs) for implementation. A distribution feeder with tap changing transformer and DG units has been extracted from a practical system to test the proposed control technique. The results show that the proposed method provides an effective solution for coordination of DG with another DG or voltage regulating devices and the integration of protection principles has considerably reduced the control interaction to achieve the desired voltage correction.

Community wide interventions for increasing physical activity

Background Multi-strategic community wide interventions for physical activity are increasingly popular but their ability to achieve population level improvements is unknown. Objectives To evaluate the effects of community wide, multi-strategic interventions upon population levels of physical activity. Search methods We searched the Cochrane Public Health Group Segment of the Cochrane Register of Studies,The Cochrane Library, MEDLINE, MEDLINE in Process, EMBASE, CINAHL, LILACS, PsycINFO, ASSIA, the British Nursing Index, Chinese CNKI databases, EPPI Centre (DoPHER, TRoPHI), ERIC, HMIC, Sociological Abstracts, SPORTDiscus, Transport Database and Web of Science (Science Citation Index, Social Sciences Citation Index, Conference Proceedings Citation Index). We also scanned websites of the EU Platform on Diet, Physical Activity and Health; Health-Evidence.org; the International Union for Health Promotion and Education; the NIHR Coordinating Centre for Health Technology (NCCHTA); the US Centre for Disease Control and Prevention (CDC) and NICE and SIGN guidelines. Reference lists of all relevant systematic reviews, guidelines and primary studies were searched and we contacted experts in the field. The searches were updated to 16 January 2014, unrestricted by language or publication status. Selection criteria Cluster randomised controlled trials, randomised controlled trials, quasi-experimental designs which used a control population for comparison, interrupted time-series studies, and prospective controlled cohort studies were included. Only studies with a minimum six-month follow up from the start of the intervention to measurement of outcomes were included. Community wide interventions had to comprise at least two broad strategies aimed at physical activity for the whole population. Studies which randomised individuals from the same community were excluded. Data collection and analysis At least two review authors independently extracted the data and assessed the risk of bias. Each study was assessed for the setting, the number of included components and their intensity. The primary outcome measures were grouped according to whether they were dichotomous (per cent physically active, per cent physically active during leisure time, and per cent physically inactive) or continuous (leisure time physical activity time (time spent)), walking (time spent), energy expenditure (as metabolic equivalents or METS)). For dichotomous measures we calculated the unadjusted and adjusted risk difference, and the unadjusted and adjusted relative risk. For continuous measures we calculated percentage change from baseline, unadjusted and adjusted. Main results After the selection process had been completed, 33 studies were included. A total of 267 communities were included in the review (populations between 500 and 1.9 million). Of the included studies, 25 were set in high income countries and eight were in low income countries. The interventions varied by the number of strategies included and their intensity. Almost all of the interventions included a component of building partnerships with local governments or non-governmental organisations (NGOs) (29 studies). None of the studies provided results by socio-economic disadvantage or other markers of equity. However, of those included studies undertaken in high income countries, 14 studies were described as being provided to deprived, disadvantaged or low socio-economic communities. Nineteen studies were identified as having a high risk of bias, 10 studies were unclear, and four studies had a low risk of bias. Selection bias was a major concern with these studies, with only five studies using randomisation to allocate communities. Four studies were judged as being at low risk of selection bias although 19 studies were considered to have an unclear risk of bias. Twelve studies had a high risk of detection bias, 13 an unclear risk and four a low risk of bias. Generally, the better designed studies showed no improvement in the primary outcome measure of physical activity at a population level. All four of the newly included, and judged to be at low risk of bias, studies (conducted in Japan, United Kingdom and USA) used randomisation to allocate the intervention to the communities. Three studies used a cluster randomised design and one study used a stepped wedge design. The approach to measuring the primary outcome of physical activity was better in these four studies than in many of the earlier studies. One study obtained objective population representative measurements of physical activity by accelerometers, while the remaining three low-risk studies used validated self-reported measures. The study using accelerometry, conducted in low income, high crime communities of USA, emphasised social marketing, partnership with police and environmental improvements. No change in the seven-day average daily minutes of moderate to vigorous physical activity was observed during the two years of operation. Some program level effect was observed with more people walking in the intervention community, however this result was not evident in the whole community. Similarly, the two studies conducted in the United Kingdom (one in rural villages and the other in urban London; both using communication, partnership and environmental strategies) found no improvement in the mean levels of energy expenditure per person per week, measured from one to four years from baseline. None of the three low risk studies reporting a dichotomous outcome of physical activity found improvements associated with the intervention. Overall, there was a noticeable absence of reporting of benefit in physical activity for community wide interventions in the included studies. However, as a group, the interventions undertaken in China appeared to have the greatest possibility of success with high participation rates reported. Reporting bias was evident with two studies failing to report physical activity measured at follow up. No adverse events were reported.The data pertaining to cost and sustainability of the interventions were limited and varied. Authors' conclusions Although numerous studies have been undertaken, there is a noticeable inconsistency of the findings in the available studies and this is confounded by serious methodological issues within the included studies. The body of evidence in this review does not support the hypothesis that the multi-component community wide interventions studied effectively increased physical activity for the population, although some studies with environmental components observed more people walking. Plain language summary Community wide interventions for increasing physical activity Not having enough physical activity leads to poorer health. Regular physical activity can reduce the risk of chronic disease and improve one's health and wellbeing. The lack of physical activity is a common and in some cases a growing health problem. To address this, 33 studies have used improvement activities directed at communities, using more than one approach in a single program. When we first looked at the available research in 2011 we observed that there was a lack of good studies which could show whether this approach was beneficial or not. Some studies claimed that community wide programs improved physical activities and other studies did not. In this update we found four new studies that were of good quality; however none of these four studies increased physical activity levels for the population. Some studies reported program level effects such as observing more people walking, however the population level of physical activity had not increased. This review found that community wide interventions are very difficult to undertake, and it appears that they usually fail to provide a measurable benefit in physical activity for a population. It is apparent that many of the interventions failed to reach a substantial portion of the community, and we speculate that some single strategies included in the combination may lack individual effectiveness. Laički sažetak Intervencije u zajednici za povećanje tjelesne aktivnosti Nedostatna tjelesna aktivnost povezana je s lošijim zdravljem.Redovita tjelesna aktivnost može umanjiti rizik od kroničnih bolesti te poboljšati zdravlje i kvalitetu života pojedinca.Manjak tjelesne aktivnosti čest je problem, a učestalost tog problema se povećava.Cochrane sustavni pregled je analizirao 33 studije koje su istražile programe za povećanje tjelesne aktivnosti u zajednici, u kojima se koristilo više od jednog pristupa.Kad su prvi put pregledani dokazi iz istraživanja koja su bila dostupna 2011. godine, utvrđeno je da nema dovoljno dobrih studija koje bi mogle pokazati je li takav pristup koristan ili ne.Primjerice, neke studije tvrde da programi za povećanje tjelesne aktivnosti u zajednici poboljšavaju tjelesnu aktivnost pojedinaca u zajednici, a druge studije tvrde suprotno.U ovom obnovljenom sustavnom pregledu pronađene su 4 nove studije koje su bile visoke kvalitete, ail nijedna od tih studija nije pokazala da je istraživana intervencija dovela do povećanja tjelesne aktivnosti u zajednici.Neke su studije opisale učinak na način da je opisano da je uočeno da više ljudi u zajednici hoda, međutim, ukupna razina tjelesne aktivnosti u promatranoj populaciji nije se povećala.Ovaj sustavni pregled je utvrdio da je intervencije za povećanje tjelesne aktivnosti u zajednici teško provesti i čini se da one obično ne uspijevaju u svojoj namjeri da na mjerljiv način povećaju tjelesnu aktivnost u populaciji.Čini se da mnoge intervencije nisu uspjele doseći veći broj stanovnika u zajednici pa se može smatrati da neke od strategija uključene u analizirane kombinacije nisu zasebno učinkovite.

Battery energy storage systems to improve power system frequency response

Battery energy storage systems (BESS) are becoming feasible to provide system frequency support due to recent developments in technologies and plummeting cost. Adequate response of these devices becomes critical as the penetration of the renewable energy sources increases in the power system. This paper proposes effective use of BESS to improve system frequency performance. The optimal capacity and the operation scheme of BESS for frequency regulation are obtained using two staged optimization process. Furthermore, the effectiveness of BESS for improving the system frequency response is verified using dynamic simulations.