Influence of historic land use change on the biosphere-atmosphere-exchange of C and N trace gases in the humid, subtropical region of Queensland

Increases in atmospheric concentrations of the greenhouse gases (GHGs) carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O) due to human activities have been linked to climate change. GHG emissions from land use change and agriculture have been identified as significant contributors to both Australia’s and the global GHG budget. This is expected to increase over the coming decades as rates of agriculture intensification and land use change accelerate to support population growth and food production. Limited data exists on CO2, CH4 and N2O trace gas fluxes from subtropical or tropical soils and land uses. To develop effective mitigation strategies a full global warming potential (GWP) accounting methodology is required that includes emissions of the three primary greenhouse gases. Mitigation strategies that focus on one gas only can inadvertently increase emissions of another. For this reason, detailed inventories of GHGs from soils and vegetation under individual land uses are urgently required for subtropical Australia. This study aimed to quantify GHG emissions over two consecutive years from three major land uses; a well-established, unfertilized subtropical grass-legume pasture, a 30 year (lychee) orchard and a remnant subtropical Gallery rainforest, all located near Mooloolah, Queensland. GHG fluxes were measured using a combination of high resolution automated sampling, coarser spatial manual sampling and laboratory incubations. Comparison between the land uses revealed that land use change can have a substantial impact on the GWP on a landscape long after the deforestation event. The conversion of rainforest to agricultural land resulted in as much as a 17 fold increase in GWP, from 251 kg CO2 eq. ha-1 yr-1 in the rainforest to 889 kg CO2 eq. ha-1 yr-1 in the pasture to 2538 kg CO2 eq. ha-1 yr-1 in the lychee plantation. This increase resulted from altered N cycling and a reduction in the aerobic capacity of the soil in the pasture and lychee systems, enhancing denitrification and nitrification events, and reducing atmospheric CH4 uptake in the soil. High infiltration, drainage and subsequent soil aeration under the rainforest limited N2O loss, as well as promoting CH4 uptake of 11.2 g CH4-C ha-1 day-1. This was among the highest reported for rainforest systems, indicating that aerated subtropical rainforests can act as substantial sink of CH4. Interannual climatic variation resulted in significantly higher N2O emission from the pasture during 2008 (5.7 g N2O-N ha day) compared to 2007 (3.9 g N2O-N ha day), despite receiving nearly 500 mm less rainfall. Nitrous oxide emissions from the pasture were highest during the summer months and were highly episodic, related more to the magnitude and distribution of rain events rather than soil moisture alone. Mean N2O emissions from the lychee plantation increased from an average of 4.0 g N2O-N ha-1 day-1, to 19.8 g N2O-N ha-1 day-1 following a split application of N fertilizer (560 kg N ha-1, equivalent to 1 kg N tree-1). The timing of the split application was found to be critical to N2O emissions, with over twice as much lost following an application in spring (emission factor (EF): 1.79%) compared to autumn (EF: 0.91%). This was attributed to the hot and moist climatic conditions and a reduction in plant N uptake during the spring creating conditions conducive to N2O loss. These findings demonstrate that land use change in subtropical Australia can be a significant source of GHGs. Moreover, the study shows that modifying the timing of fertilizer application can be an efficient way of reducing GHG emissions from subtropical horticulture.

Consuming authentic neighborhood : an autoethnography of experiencing a neighborhood's new beginnings and origins within its servicescapes

Purpose - This chapter examines individual and collective quests for authenticity, as experienced through consumption activities within an urban neighbourhood. It investigates the interplay between consumption experiences as authenticating acts and authoritative performances (Arnould and Price 2000), and considers the implications with regard to Zukin’s (2010) theories on urban authenticity, and how it may be experienced as new beginnings and origins. Methodology - The chapter is based on autoethnographic research that explores how interaction and identity definition within servicescapes can work to construct place-based community. Findings - It describes how a servicescape of new beginnings offered opportunities for individual authentication that also enabled personal identification with a specific cultural group. This authentication drew on the cultural capital embedded in such locations, including their association with gentrification. This is contrast with the collective identification offered by a servicescape operating as a place of exposure. This site of origins displayed the social practices of a different demographic, which worked to highlight a relational link between the authentication practices of the broader neighbourhood. These sites also worked cumulatively, to highlight the inauthenticities within my identification practices and offer opportunities for redress. Through this interplay it was possible to establish an authentic sense of neighbourhood that drew on its new beginnings and its origins, and was both individual and collective. Originality - Through the combination of urban and consumption-based perspectives of authenticity, and an autoethnographic methodology, this chapter offers a different insight into the ways identification with, and attachment to, a neighbourhood can develop through consumption experiences.

Colin Marsh (2008) Becoming a Teacher: Knowledge, Skills and Issues. 4th edition, Frenchs Forrest: Pearson Education Australia, 460 pages

Becoming a Teacher is structured in five very readable sections. The introductory section addresses the nature of teaching and the importance of developing a sense of purpose for teaching in a 21st century classroom. It also introduces some key concepts that are explored throughout the volume according to the particular chapter focus of each part. For example, the chapters in Part 2 explore aspects of student learning and the learning environment and focus on how students develop and learn, learner motivation, developing self esteem and learning environments. The concepts developed in this section, such as human development, stages of learning, motivation, and self-concept are contextualised in terms of theories of cognitive development and theories of social, emotional and moral development. The author, Colin Marsh, draws on his extensive experience as an educator to structure the narrative of chapters in this part via checklists for observation, summary tables, sample strategies for teaching at specific stages of student development, and questions under the heading ‘your turn’. Case studies such as ‘How I use Piaget in my teaching’ make that essential link between theory and practice, something which pre-service teachers struggle with in the early phases of their university course. I was pleased to see that Marsh also explores the contentious and debated aspects of these theoretical frameworks to demonstrate that pre-service teachers must engage with and critique the ways in which theories about teaching and learning are applied. Marsh weaves in key quotations and important references into each chapter’s narrative and concludes every chapter with summary comments, reflection activities, lists of important references and useful web sources. As one would expect of a book published in 2008, Becoming a Teacher is informed by the most recent reports of classroom practice, current policy initiatives and research.

New media services : ratings and recommendations websites in the travel and tourism industry

The travel and hospitality industry is one which relies especially crucially on word of mouth, both at the level of overall destinations (Australia, Queensland, Brisbane) and at the level of travellers’ individual choices of hotels, restaurants, sights during their trips. The provision of such word-of-mouth information has been revolutionised over the past decade by the rise of community-based Websites which allow their users to share information about their past and future trips and advise one another on what to do or what to avoid during their travels. Indeed, the impact of such user-generated reviews, ratings, and recommendations sites has been such that established commercial travel advisory publishers such as Lonely Planet have experienced a pronounced downturn in sales ¬– unless they have managed to develop their own ways of incorporating user feedback and contributions into their publications. This report examines the overall significance of ratings and recommendation sites to the travel industry, and explores the community, structural, and business models of a selection of relevant ratings and recommendations sites. We identify a range of approaches which are appropriate to the respective target markets and business aims of these organisations, and conclude that there remain significant opportunities for further operators especially if they aim to cater for communities which are not yet appropriately served by specific existing sites. Additionally, we also point to the increasing importance of connecting stand-alone ratings and recommendations sites with general social media spaces like Facebook, Twitter, and LinkedIn, and of providing mobile interfaces which enable users to provide updates and ratings directly from the locations they happen to be visiting. In this report, we profile the following sites: * TripAdvisor, the international market leader for travel ratings and recommendations sites, with a membership of some 11 million users; * IgoUgo, the other leading site in this field, which aims to distinguish itself from the market leader by emphasising the quality of its content; * Zagat, a long-established publisher of restaurant guides which has translated its crowdsourcing model from the offline to the online world; * Lonely Planet’s Thorn Tree site, which attempts to respond to the rise of these travel communities by similarly harnessing user-generated content; * Stayz, which attempts to enhance its accommodation search and booking services by incorporating ratings and reviews functionality; and * BigVillage, an Australian-based site attempting to cater for a particularly discerning niche of travellers; * Dopplr, which connects travel and social networking in a bid to pursue the lucrative market of frequent and business travellers; * Foursquare, which builds on its mobile application to generate a steady stream of ‘check-ins’ and recommendations for hospitality and other services around the world; * Suite 101, which uses a revenue-sharing model to encourage freelance writers to contribute travel writing (amongst other genres of writing); * Yelp, the global leader in general user-generated product review and recommendation services. In combination, these profiles provide an overview of current developments in the travel ratings and recommendations space (and beyond), and offer an outlook for further possibilities. While no doubt affected by the global financial downturn and the reduction in travel that it has caused, travel ratings and recommendations remain important – perhaps even more so if a reduction in disposable income has resulted in consumers becoming more critical and discerning. The aggregated word of mouth from many tens of thousands of travellers which these sites provide certainly has a substantial influence on their users. Using these sites to research travel options has now become an activity which has spread well beyond the digirati. The same is true also for many other consumer industries, especially where there is a significant variety of different products available – and so, this report may also be read as a case study whose findings are able to be translated, mutatis mutandis, to purchasing decisions from household goods through consumer electronics to automobiles.

Advanced mathematical modelling and experimental investigation of new torque arms for shaft-mounted drives

Shaft-mounted gearboxes are widely used in industry. The torque arm that holds the reactive torque on the housing of the gearbox, if properly positioned creates the reactive force that lifts the gearbox and unloads the bearings of the output shaft. The shortcoming of these torque arms is that if the gearbox is reversed the direction of the reactive force on the torque arm changes to opposite and added to the weight of the gearbox overloads the bearings shortening their operating life. In this paper, a new patented design of torque arms that develop a controlled lifting force and counteract the weight of the gearbox regardless of the direction of the output shaft rotation is described. Several mathematical models of the conventional and new torque arms were developed and verified experimentally on a specially built test rig that enables modelling of the radial compliance of the gearbox bearings and elastic elements of the torque arms. Comparison showed a good agreement between theoretical and experimental results.

Manifolds, patterns and transitions in a creative life

Using sculpture and drawing as my primary methods of investigation, this research explores ways of shifting the emphasis of my creative visual arts practice from object to process whilst still maintaining a primacy of material outcomes. My motivation was to locate ways of developing a sustained practice shaped as much by new works, as by a creative flow between works. I imagined a practice where a logic of structure within discrete forms and a logic of the broader practice might be developed as mutually informed processes. Using basic structural components of multiple wooden curves and linear modes of deployment – in both sculptures and drawings – I have identified both emergence theory and the image of rhizomic growth (Deleuze and Guattari, 1987) as theoretically integral to this imagining of a creative practice, both in terms of critiquing and developing works. Whilst I adopt a formalist approach for this exegesis, the emergence and rhizome models allow it to work as a critique of movement, of becoming and changing, rather than merely a formalism of static structure. In these models, therefore, I have identified a formal approach that can be applied not only to objects, but to practice over time. The thorough reading and application of these ontological models (emergence and rhizome) to visual arts practice, in terms of processes, objects and changes, is the primary contribution of this thesis. The works that form the major component of the research develop, reflect and embody these notions of movement and change.

Cultural economic geography and global media studies : the rise of asian media capitals?

This paper considers the scope to develop an approach to the spatial dimensions of media and culture that is informed by cultural-economic geography. I refer to cultural-economic geography as that strand of research in the field of geography that has been informed on the one hand by the ‘cultural turn’ in both geographical and economic thought, and which focuses on the relationship between, space, knowledge and identity in the spheres of production and consumption, and on the other to work by geographers that has sought to map the scale and significance of the cultural or creative industries as new drivers of the global economy. The paper considers the extent to which this work enables those engaged with urban cultural policy to get beyond some of the impasses that have arisen with the development of “creative cities” policies derived from the work of authors such as Richard Florida as well as the business management literature on clusters. It will frame these debates in the context of recent work by Michael Curtin on media capitals, and the question of whether cities in East Asia can emerge as media capitals from outside of the US-Europe-dominated transnational cultural axis.

Strengthening and formally verifying privacy in identity management systems

In a digital world, users’ Personally Identifiable Information (PII) is normally managed with a system called an Identity Management System (IMS). There are many types of IMSs. There are situations when two or more IMSs need to communicate with each other (such as when a service provider needs to obtain some identity information about a user from a trusted identity provider). There could be interoperability issues when communicating parties use different types of IMS. To facilitate interoperability between different IMSs, an Identity Meta System (IMetS) is normally used. An IMetS can, at least theoretically, join various types of IMSs to make them interoperable and give users the illusion that they are interacting with just one IMS. However, due to the complexity of an IMS, attempting to join various types of IMSs is a technically challenging task, let alone assessing how well an IMetS manages to integrate these IMSs. The first contribution of this thesis is the development of a generic IMS model called the Layered Identity Infrastructure Model (LIIM). Using this model, we develop a set of properties that an ideal IMetS should provide. This idealized form is then used as a benchmark to evaluate existing IMetSs. Different types of IMS provide varying levels of privacy protection support. Unfortunately, as observed by Jøsang et al (2007), there is insufficient privacy protection in many of the existing IMSs. In this thesis, we study and extend a type of privacy enhancing technology known as an Anonymous Credential System (ACS). In particular, we extend the ACS which is built on the cryptographic primitives proposed by Camenisch, Lysyanskaya, and Shoup. We call this system the Camenisch, Lysyanskaya, Shoup - Anonymous Credential System (CLS-ACS). The goal of CLS-ACS is to let users be as anonymous as possible. Unfortunately, CLS-ACS has problems, including (1) the concentration of power to a single entity - known as the Anonymity Revocation Manager (ARM) - who, if malicious, can trivially reveal a user’s PII (resulting in an illegal revocation of the user’s anonymity), and (2) poor performance due to the resource-intensive cryptographic operations required. The second and third contributions of this thesis are the proposal of two protocols that reduce the trust dependencies on the ARM during users’ anonymity revocation. Both protocols distribute trust from the ARM to a set of n referees (n > 1), resulting in a significant reduction of the probability of an anonymity revocation being performed illegally. The first protocol, called the User Centric Anonymity Revocation Protocol (UCARP), allows a user’s anonymity to be revoked in a user-centric manner (that is, the user is aware that his/her anonymity is about to be revoked). The second protocol, called the Anonymity Revocation Protocol with Re-encryption (ARPR), allows a user’s anonymity to be revoked by a service provider in an accountable manner (that is, there is a clear mechanism to determine which entity who can eventually learn - and possibly misuse - the identity of the user). The fourth contribution of this thesis is the proposal of a protocol called the Private Information Escrow bound to Multiple Conditions Protocol (PIEMCP). This protocol is designed to address the performance issue of CLS-ACS by applying the CLS-ACS in a federated single sign-on (FSSO) environment. Our analysis shows that PIEMCP can both reduce the amount of expensive modular exponentiation operations required and lower the risk of illegal revocation of users’ anonymity. Finally, the protocols proposed in this thesis are complex and need to be formally evaluated to ensure that their required security properties are satisfied. In this thesis, we use Coloured Petri nets (CPNs) and its corresponding state space analysis techniques. All of the protocols proposed in this thesis have been formally modeled and verified using these formal techniques. Therefore, the fifth contribution of this thesis is a demonstration of the applicability of CPN and its corresponding analysis techniques in modeling and verifying privacy enhancing protocols. To our knowledge, this is the first time that CPN has been comprehensively applied to model and verify privacy enhancing protocols. From our experience, we also propose several CPN modeling approaches, including complex cryptographic primitives (such as zero-knowledge proof protocol) modeling, attack parameterization, and others. The proposed approaches can be applied to other security protocols, not just privacy enhancing protocols.

Aesthetic tensions : evaluating outcomes for practice-led research and industry

This paper explores principles of contemporary aesthetics to suggest a basis for determining qualitative outcomes of artistic works in two contexts: the arts industry and the academy setting of practice-led research. Commonly articulated measures of quality—creativity and innovation—are questioned as mere rhetoric if not framed in specific ways in the two discrete settings. The paper also interrogates generally held assumptions that a longer time to develop work and greater periods of self-reflexivity will produce higher calibre artistic outcomes. The unease produced by apparent differences in qualitative outcomes between art works created in an industry setting and those created through practice-led research is analysed through three interconnected framing devices: intention, contextual parameters and criteria for evaluation, in conjunction with the relationships between the art work, the artist and the audience/viewer/listener. Common and differentiated criteria in the two contexts are explored, leading to the conclusion that innovation is more likely to be revealed in the end product in an industry context whereas in practice-led research it may be in the methodological processes of creating the work. While identifying and acknowledging that the two contexts encourage and produce distinctive qualitative artistic outcomes, both of value to the arts and the academy, the paper recommends ways in which closer formal liaison between industry artists and practice-led artists and supervisors might occur in order to ensure ongoing mutual influence and relevance.

What will the Apple iPad deliver for newspapers?

The launch of the Apple iPad in January 2010 was one of the most anticipated and publicised launched of a new technological device in recent history. Positioning itself as between a smart phone and a PC, but with the attributes of both, Apple have sought to develop a new market niche with the iPad for tablet PC devices, and early signs are that market expectations are being met.. The iPad’s launch was potentially fortuitous for the newspaper industry worldwide, as it offered the potential to address its two recurring problems: the slow but inexorable decline of print media circulation, and the inability to satisfactorily monetise online readerships. As a result, the Apple iPad has benefited from an enormous amount of free publicity in newspapers, as they develop their own applications (apps) for the device. This paper reports on findings from work undertaken through Smart Services CRC into potential take-up and likely uses of the iPad, and their implications for the news media industry. It reports on focus group analysis undertaken in the mid-2010 using “customer job mapping” methodologies, that draw attention to current gaps in user behaviour in terms of available devices, in order to anticipate possibilities beyond the current “three screens” of PC, mobile phone and television.

Journalism as social networking : the Australian youdecide project and the 2007 federal election

The increasing prevalence of new media technologies and the rise of citizen journalism has coincided with a crisis in industrial journalism –as the figure of the "journalist as hero" is fading, new media forms have facilitated the production of news content "from below" by citizens and "pro-am" journalists. Participation in an action-research project run during the 2007 Australian Federal Election, youdecide 2007, allowed the authors to gain first-hand insights into the progress of citizen-led news media in Australia, but also allowed us to develop an account of what the work of facilitating citizen journalism involves. These insights are important to understanding the future of professional journalism and journalism education, as more mainstream media organizations move to accommodate and harness user-created content. The paper considers the relevance of citizen journalism projects as forms of R&D for understanding news production and distribution in participatory media cultures, and the importance of grounded case studies for moving beyond normative debates about new media and the future of journalism.

Evaluation of accessibility for knowledge-based cities

Purpose: The purpose of the paper is to develop a framework for evaluation of accessibility for knowledge based cities. ----- ----- Design/methodology/approach: This approach notifies common mistakes and problems in accessibility assessment for knowledge cities. ----- ----- Originality/value: Accessibility plays a key role in transport sustainability and recognizes the crucial links between transport and sustainable goals like air quality, environmental resource consumption & social equity. In knowledge cities, accessibility has significant effects on quality of life and social equity by improving the mobility of people and goods. Accessibility also influences patterns of growth and economic health by providing access to land. Accessibility is not only one of the components of knowledge cities but also affects other elements of knowledge cities directly or indirectly. ----- ----- Practical implications: The outcomes of the application will be helpful for developing particular methodologies for evaluating knowledge cities. On other words, this methodology attempts to develop an assessment procedure for examining accessibility of knowledge-based cities.

Assessing and learning in internships: Reflecting on pedagogy and progress

An elective internship unit as part of a work integrated learning program in a business faculty is presented as a case study. In the unit, students complete a minimum of 120 hours work placement over the course of a 13 week semester. The students are majoring in advertising, marketing, or public relations and are placed in corporations, government agencies, and not for profit organisations. To support and scaffold the students’ learning in the work environment, a range of classroom and online learning activities are part of the unit. Classroom activities include an introductory workshop to prepare students for placement, an industry panel, and interview workshop. These are delivered as three workshops across the semester. Prior to commencing their placement, students complete a suite of online learning modules. The Work Placement Preparation Program assists students in securing obtaining a placement and make a successful transition to the work environment. It provides an opportunity for students to source possible work placement sites, prepare competitive applications, develop and rehearse interview skills, deal with workplace issues, and use a student ePortfolio to reflect on their skills and achievements. Students contribute to a reflective blog throughout their placement, with feedback from academic supervisors throughout the placement. The completion of the online learning modules and contribution to a reflective blog are assessed as part of the unit. Other assessment tools include a internship plan and learning contract between the student, industry supervisor, and academic supervisor; job application including responses to selection criteria; and presentation to peers, academics and industry representatives at a poster session. The paper discusses the development of the internship unit over three years, particularly learning activities and assessment. The reflection and refinement of the unit is informed by a pedagogical framework, and the development of processes to best manage placement for all stakeholders. A model of best practice is proposed, that can be adapted to a variety of discipline areas.

Developing reflective practitioners online: The business of blogs in work integrated learning

Reflective practice is widely considered across discussions around educational psychology, professional identity, employability of graduates, and generic or graduate capabilities. Critical reflection is essential for providing a bridge between the university and the workplace, and for ultimately preparing work ready graduates (Patrick et al, 2008). Work integrated learning, particularly through internships and work placements for students, is viewed as a valuable approach for students developing skills in reflective practice. Reflective journals are one of the tools often used to encourage and develop student reflection. Shifting the reflective journal to an online interface as a reflective blog presents opportunities for more meaningful, frequent and richer interaction between the key players in a work integrated learning experience. This paper examines the adoption, implementation and refinement of the use of reflective blogs in a work integrated learning unit for business students majoring in advertising, marketing and public relations disciplines. The reflective blog is discussed as a learning and assessment tool, including the approaches taken to integrate and scaffold the blog as part of the work integrated learning experience. Graduate capabilities were used as cornerstones for students to frame students’ thinking, experiences and reflection. These capabilities emphasise the value of coherent theoretical and practical knowledge, coupled with critical, creative and analytical thinking, problem solving skills, self reliance and resilience. Underlying these graduate capabilities is a focus on assessment for learning matched with assessment of learning. Using specific triggers and prompts as part of the reflective process, and incorporating ongoing feedback from academic supervisors, students moved from descriptive levels of reflection, to more meaningful and critical reflection. Students’ blogs are analysed to identify key themes, challenges and achievements in the work integrated learning experience. Suggestions for further development and improvement, together with a model of best practice, are proposed.

Support for gold open access publishing strategies at QUT

INTRODUCTION: Since the introduction of its QUT ePrints institutional repository of published research outputs, together with the world’s first mandate for author contributions to an institutional repository, Queensland University of Technology (QUT) has been a leader in support of green road open access. With QUT ePrints providing our mechanism for supporting the green road to open access, QUT has since then also continued to expand its secondary open access strategy supporting gold road open access, which is also designed to assist QUT researchers to maximise the accessibility and so impact of their research. ---------- METHODS: QUT Library has adopted the position of selectively supporting true gold road open access publishing by using the Library Resource Allocation budget to pay the author publication fees for QUT authors wishing to publish in the open access journals of a range of publishers including BioMed Central, Public Library of Science and Hindawi. QUT Library has been careful to support only true open access publishers and not those open access publishers with hybrid models which “double dip” by charging authors publication fees and libraries subscription fees for the same journal content. QUT Library has maintained a watch on the growing number of open access journals available from gold road open access publishers and their increased rate of success as measured by publication impact. ---------- RESULTS: This paper reports on the successes and challenges of QUT’s efforts to support true gold road open access publishers and promote these publishing strategy options to researchers at QUT. The number and spread of QUT papers submitted and published in the journals of each publisher is provided. Citation counts for papers and authors are also presented and analysed, with the intention of identifying the benefits to accessibility and research impact for early career and established researchers.---------- CONCLUSIONS: QUT Library is eager to continue and further develop support for this publishing strategy, and makes a number of recommendations to other research institutions, on how they can best achieve success with this strategy.