Electrochemical stability of SnO2-based coated Ti electrodes

The electrochemical behavior of SnO2-SbOx, based electrodes, with and without the addition of RuO2, was studied by cyclic voltammetry, service life measurements and electrochemical impedance spectroscopy in 0.5 M H2SO4 the physical characteristics of these materials were investigated using SEM, EDX and XRD. The resulting cyclic voltammograms obtained using SnO2-SbOx, and SnO2-SbOx-RuO2(x), x = 30, 5, 1 and 0.4 % showed that the OER overpotential decreased with the addition of RuO2. In the repetitive triangular potential voltammetry applied to the SnO2 electrode without and with RuO2 (1%), a higher anodic current is observed during the first potential scan; it is explained in terms of the oxidation of the Ti substrate. The addition of 1% RuO2 increased the service life from 8 to 20 hours at 10 mAcm(-2), while at 50 mAcm(-2) this increase was from 1 to 8 hours. AC Impedance diagrams obtained for the Ti/SnO2-SbOx and Ti/SnO2-SbOx-RuO2 electrodes at the rest potential and at a potential in the OER region can be explained by a single equivalent circuit containing two elements in series. The results showed that the charge transfer resistance and the resistance of the oxide film are lower in the oxide film containing RuO2. Surface analysis of Ti/SnO2-SbOx, revealed that it is relatively porous and formed by clusters of small particles. The Ti/SnO2-SbOx-RuO2 (1%) film is more compact, though. XRD analysis showed that a Sn1-xTixO2 oxide is formed on the Ti/SnO2-SbOx with 1% and without RuO2 electrodes.

Analytical procedure for total mercury determination in fishes and shrimps by chronopotentiometric stripping analysis at gold film electrodes after microwave digestion

A method for the total mercury determination in fish and shrimps employing chronopotentiometric stripping analysis on gold film electrodes is described. Fish and shrimp tissues were digested using a microwave oven equipped with closed vessels. We developed a microwave heating program which decomposed all the samples employing diluted nitric acid and hydrogen peroxide. The proposed method was validated by analyzing a certified reference material and then applied for different fish species from fresh water and seawater acquired in local markets of São Paulo city, Brazil. The Brazilian legislation establishes 0.5 and 1 mg per kilogram of fish as upper limit of mercury for omnivorous and predator species, respectively. Except for blue shark tissues, the mercury content was situated below 0.5 mu g g(-1) for all the analyzed samples. The detection limit of the proposed method was calculated as 5 ng g(-1) of sample utilizing 5 minutes of electrodeposition (+300 mV vs. Ag/AgCl) on the gold electrode. (c) 2006 Elsevier Ltd. All rights reserved.

Use of sugar cane bagasse as solid phase extractor for cadmium determination by FAAS

The present paper describes the use of sugar cane bagasse as solid phase extractor for cadmium determination after complexation of the analyte with ammonium diethyldithiophosphate (ADDP) and sorption of the Cd-DDP complexes on the solid support. The concomitants were separated using a flow injection analysis (FIA) system coupled to flame atomic absorption spectrometry (FAAS) for determination. The main parameters such as ADDP concentration, acid medium, flow rate, reaction coil length, and reaction time were investigated.The results obtained with HNO3 showed good accuracy and precision. The enhancement factor was 20.5 times for a 120-second preconcentration time, and the analytical frequency was 25 determinations per hour. The calibration curve was linear over the concentration range of 1-40 mu g L-1 Cd with a LOD of 0.697 mu g L-1 Cd and a relative standard deviation of 0.96% after 12 successive measurements of 30 mu g L-1 Cd.The proposed method was evaluated for the FIA-FAAS analysis of certified reference materials (tomato leaves, spinach leaves, and bovine liver) and Cd-spiked foods (shrimp, sardine, tuna, chicken liver and bovine liver). Good recoveries (80.0-97.1%) for the Cd-spiked samples and certified reference materials were obtained. The results of bagasse-packed minicolumns were compared with Si-C,8 packed minicolumns. The F-test was applied between Si-C-18/Bagasse minicolumns, Si-C-18/certified values, and bagasse/certified values. It was found that the results were in agreement with the certified values at a 95% confidence level.

Weight width carapace relationship in the crab hepatus-pudibundus (herbst, 1785) (crustacea, decapoda, calappidae) of the Ubatuba region, SP, Brazil

In populational studies, the weight/width carapace relationship analysis, can furnish indications about the individual physiological variations as a function of the environment, and it can indicate sexual dimorphism. The goal of this research is to find the mathematical expressions of weight/width carapace relationship in the crab Hepatus pudibundus. This study was accomplished by analysing the crabs that were sampled monthly with a shrimp fishing boat equipped with 2 otter-trawl nets, during the period from november/1988 to october/1989. A total of 624 specimens were obtained composed of 244 males and 380 females. In each group the sex, the weight (PE) and the carapace width (LC) were determined. The obtained values agree with the studied range, showing variations during male and female development, represented by the potential function of the equation Y = aX(b). Such variations are probably related to reproductive strategies.

Coating residual stress effects on fatigue performance of 7050-T7451 aluminum alloy

The tendency of the aircraft industry is to enhance customer value by improving performance and reducing environmental impact. In view of availability, aluminum alloys have a historically tendency to faster insertion due to their lower manufacturing and operated production infrastructure. In landing gear components, wear and corrosion control of many components is accomplished by surface treatments of chrome electroplating on steel or anodizing of aluminum. One of the most interesting environmentally safer and cleaner alternatives for the replacement of hard chrome plating or anodizing is tungsten carbide thermal spray coating, applied by the high velocity oxy fuel (HVOF) process. However, it was observed that residual stresses originating from these coatings reduce the fatigue strength of a component.An effective process as shot peening treatment, considered to improve the fatigue strength, pushes the crack sources beneath the surface in most of medium and high cycle cases, due to the compressive residual stress field induced. The objective of this research is to evaluate a tungsten carbide cobalt (WC-Co) coating applied by the high velocity oxy fuel (HVOF) process, used to replace anodizing. Anodic films were grown on 7050-T7451 aluminum alloy by sulfuric acid anodizing, chromic acid anodizing and hard anodizing. The influence on axial fatigue strength of anodic films grown on the aluminum alloy surface is to degrade the stress-life performance of the base material. Three groups of specimens were prepared and tested in axial fatigue to obtain S-N curves: base material, base material coated by HVOF and base material shot peened and coated.Experimental results revealed increase in the fatigue strength of Al 7050-T7451 alloy associated with the WC 17% Co coating. on the other hand, a reduction in fatigue life occurred in the shot peened and coated condition. Scanning electron microscopy technique and optical microscopy were used to observe crack origin sites, thickness and coating/substrate adhesion. (c) 2007 Elsevier B.V. All rights reserved.

Postembryonic development of Macrobrachium petronioi (Caridea : Palaemonidae) in the laboratory

Macrobrachium petronioi, a native Brazilian fresh-water shrimp, was captured along the coast of Rio Branco, Cananeia, São Paulo State, Brazil. The eggs were green-black in early development and the average size was 1.21 mm by 0.98 mm. Macrobrachium petronioi has no free-swimming larval phase. However, newly hatched larvae possessed several zoea I characters. Therefore, they were clearly more developed than newly hatched larvae of other species of Macrobrachium with prolonged larval development. The average duration of larval development in M. petronioi was 5.5 days. During early development, the larvae subsisted on stored yolk. After the third molt, the postlarvae accepted food. The three zoeal stages prior to the postlarval stage were described and characterized, with detailed morphological analyses. This species has a partially abbreviated type of development. The larval development of M. petronioi is distinguished from that of M. potiuna.

Composition and abundance of marine shrimps (Crustacea, Decapoda, Penaeidea) in Ubatuba bay, Ubatuba (SP), Brazil

This work aims to analyse the composition, abundance and distribution of the Penaeidea species which occur in the Ubatuba Bay (23 degrees 26'S and 45 degrees 02'W). The samples were monthly collected from October/1992 to September/1993. Each collect was composed of two parallel radials: the first (radial ''A'') was carried out in the mid region of the bay and the second one (radial ''B'') in the bay mouth. The trawls took one hour in a boat equipped with one otter-trawl (10 mm of mesh). The registered environmental factors were depth, bottom water temperature, granulometric composition and organic content of the sediment. After the trawls, the shrimp were separated from other marine organisms and counted. Eight species of shrimp were obtained: Xiphopenaeus kroyeri; Artemesia longinaris; Penaeus (L.) schmitti; P. (F.) brasiliensis; Trachypenaeus; constrictus; Sicyonia typica; S. dorsalis and Pleoticus muelleri. The most abundant species were X. kroyeri, A. longinaris, P. muelleri and T. constrictus. It was verified a very strong seasonality among the species. The X. kroyeri species occurred in both radials along the months but its abundance decreased from a November to March. Such fact is attributed to the temperature which reached a minimum value of 20 degrees C during this period. The species A. longinaris and P. muelleri were more frequent in the radial B which was caracterized by 14 +/- 1.3 m of depth, low organic content in the sediment (2.97%) and granulometric composition of medium sand. The distribution and abundance of these shrimps in the bay, beyond the hydrological features can be related to biotic factors as food availability, migration, inter and intra specific relations (competition, predation, etc.).

Life-cycle inventory for hydroelectric generation: a Brazilian case study

Representative Life-Cycle Inventories (LCIs) are essential for Life-Cycle Assessments (LCAs) quality and readiness. Because energy is such an important element of LCAs, appropriate LCIs on energy are crucial, and due to the prevalence of hydropower on Brazilian electricity mix, the frequently used LCIs are not representative of the Brazilian conditions. The present study developed a LCI of the Itaipu Hydropower Plant, the major hydropower plant in the world, responsible for producing 23.8% of Brazil's electricity consumption. Focused on the capital investments to construct and operate the dam, the LCI was designed to serve as a database for the LCAs of Brazilian hydroelectricity production. The life-cycle boundaries encompass the construction and operation of the dam, as well as the life-cycles of the most important material and energy consumptions (cement, steel, copper, diesel oil, lubricant oil), as well as construction site operation, emissions from reservoir flooding, material and workers transportation, and earthworks. As a result, besides the presented inventory, it was possible to determine the following processes, and respective environmental burdens as the most important life-cycle hotspots: reservoir filling (CO(2) and CH(4) emission: land use); steel life-cycle (water and energy consumption; CO, particulates, SO(x) and NO(x) emissions); cement life-cycle (water and energy consumption; CO(2) and particulate emissions); and operation of civil construction machines (diesel consumption; NO(x) emissions). Compared with another hydropower studies, the LCI showed magnitude adequacy, with better results than small hydropower, which reveals a scale economy for material and energy exchanges in the case of ltaipu Power Plant. (C) 2009 Elsevier Ltd. All rights reserved.

Development and energy balance of sugarcane in the norte fluminense, Brazil

The growing concern for renewable and cleaner energy sources has increased the demand for biofuels, pointing out the ethanol from sugarcane. The aim of this study was quantify the partition of energy balance components and monitor the physiological development indexes of the sugarcane, relating them to water availability conditions of climate and soil in Campos dos Goytacazes, Norte Fluminense, Brazil. To this end, a micrometeorological station was settled in an area of 13 ha in commercial cultivation. The culture was regularly monitored at 85, 102, 128, 149, 174, 194, 215, 235, 255 and 280 days after cutting (DAC). The variations in water availability directly influenced the rates of crop growth and energy balance. Under the conditions studied most of the available energy (53%) was consumed by the latent heat flux.

Greenhouse gas balance due to the conversion of sugarcane areas from burned to green harvest, considering other conservationist management practices

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of tungsten carbide thermal spray coating by HP/HVOF and hard chromium electroplating on AISI 4340 high strength steel

In cases of decorative and functional applications, chromium results in protection against wear and corrosion combined with chemical resistance and good lubricity. However, pressure to identify alternatives or to improve conventional chromium electroplating mechanical characteristics has increased in recent years, related to the reduction in the fatigue strength of the base material and to environmental requirements. The high efficiency and fluoride-free hard chromium electroplating is an improvement to the conventional process, considering chemical and physical final properties. One of the most interesting, environmentally safer and cleaner alternatives for the replacement of hard chrome plating is tungsten carbide thermal spray coating, applied by the high velocity oxy-fuel (HVOF) process. The aim of this study was to analyse the effects of the tungsten carbide thermal spray coating applied by the HP/HVOF process and of the high efficiency and fluoride-free hard chromium electroplating (in the present paper called 'accelerated'), in comparison to the conventional hard chromium electroplating on the AISI 4340 high strength steel behaviour in fatigue, corrosion, and abrasive wear tests. The results showed that the coatings were damaging to the AISI 4340 steel behaviour when submitted to fatigue testing, with the tungsten carbide thermal spray coatings showing the better performance. Experimental data from abrasive wear tests were conclusive, indicating better results from the WC coating. Regarding corrosion by salt spray test, both coatings were completely corroded after 72 h exposure. Scanning electron microscopy technique (SEM) and optical microscopy were used to observe crack origin sites, thickness and adhesion in all the coatings and microcrack density in hard chromium electroplatings, to aid in the results analysis. © 2001 Elsevier Science B.V. All rights reserved.

Chemistry and bioactivity of Raulinoa echinata Cowan, an endemic Brazilian rutaceae species

The hexane extract of the stems of Raulinoa echinata afforded the sesquiterpenes germacrene D (6), 1β,6α-dihydroxy-4-(15)-eudesmene (4) and oplopanone (5); the triterpenes squalene, isomultiflorenol (7), isobauerenol (8) and friedelin (9); the protolimonoids melianone (2) and melianodiol (3); and the pyranocoumarin 3-(1′-1′-dimethylallyl)-lomatin (1), which has not been reported previously as a natural product; together with β-sitosterol. The hexane extract and some of these compounds were assayed in vitro against trypomastigote forms of Trypanosoma cruzi. Brine shrimp lethality and antimicrobial activities of the crude extract and pure compounds were also evaluated.

Fluorescent amplified fragment length polymorphism (fAFLP) analyses and genetic diversity in Litopenaeus vannamei (Penaeidae)

The Pacific white shrimp, Litopenaeus vannamei (Penaeidae), represents about 95% of all Brazilian shrimp production. The Brazilian L. vannamei foundation broodstock was made up of specimens collected from different American Pacific sites, but little information was collected on the genetic structure of the broodstock. We used the fluorescence amplified fragment length polymorphism (fAFLP) method to study the genetic diversity of L. vannamei broodstock lines 03CMF1 and 03CBF1 originally produced by breeder-shrimps imported mainly from Panama and Ecuador, although wild individuals from other localities may also have been used in producing these two lines. Our results showed a total of 93 polymorphic bands ranging from 50 to 500 bp, the mean Nei's genetic diversity calculated for the total sample was 13.4% and identity and genetic distance analyses indicated high genetic homogeneity within and between both the broodstock lineages studied which suggests that they had similar genetic structure. These results may represent an important tool for the appropriate management of L. vannamei broodstocks. Copyright by the Brazilian Society of Genetics.

O impacto da pesca do camarão-rosa Farfantepenaeus paulensis (Perez-Farfante) (Decapoda, Penaeidae) nas assembléias de peixes e siris do Parque Nacional da Lagoa do Peixe, Rio Grande do Sul, Brasil

This work evaluates the impact of the pink shrimp Farfantepenaeus paulensis (Perez-Farfante, 1967) fishery on fish and crab assemblages of Lagoa do Peixe National Park, Brazil. We observed that composition of catches is similar to shrimp fisheries using fyke-net at others estuaries of Rio Grande do Sul State: pink shrimp (53%), accessory catches (24%) and bycatch (23%). However, fishery composition showed distinct differences along the saline gradient of the main park's lagoon. Regarding only fish species, the most impacted species in this fishery were Brevoortia pectinata (Jenyns, 1842), Micropogonias furnieri (Desmarest, 1823), and Jenynsia multidentata (Jenyns, 1842). In others estuaries from Rio Grande do Sul, in contrast, the most impacted species were M. furnieri, Genidens barbus (Lacepède, 1803) and Genidens genidens (Cuvier, 1829). The potential impact of the pink shrimp fishery at Lagoa do Peixe National Park seemed to be weaker when compared to shrimp fisheries elsewhere. We believe that the decision to prohibit this fishery at the Lagoa do Peixe National Park should not be based on its potential damage to the fish and crab assemblages but based on the simple fact that Brazilian laws do not allow fisheries inside National Parks.