Influência do acabamento superficial no desempenho de lubrificantes de motor novos e usados em automóveis abastecidos com E22 e E100.

Superfícies anisotrópicas lisas e rugosas foram usadas para avaliar o efeito da rugosidade e da direção de acabamento na formação de MoS2 a partir de MoDTC em ensaios tribologicos lubrificados com óleos de motor completamente formulados. Igualmente foi avaliada a resposta de atrito de lubrificantes de motor usados em carros de passageiros e em testes de dinamômetro abastecidos com etanol (E100) e gasolina (E22). Encontrou-se que tanto a direção de acabamento quanto a rugosidade foram fundamentais na reação MoDTC - MoS2. A direção de acabamento influenciou na medida que carregamentos tangenciais geram respostas diferentes nos ensaios quando são realizados paralelos e perpendiculares às linhas de acabamento, dado que para os últimos apresenta-se maior deformação plástica das asperezas, o qual favorece a obtenção de superfícies livres de óxidos, que tem sido indicada como uma condição necessário para que aconteça a reação MoDTC - MoS2. Por esta razão os valores de coeficiente de atrito próprios da formação de MoS2 foram obtidos somente nas superfícies rugosas ensaiadas perpendiculares às marcas de acabamento. Para superfícies com valores de índice de plasticidade superiores a 1 e nos quais não são formados filmes com boas capacidades redutoras de atrito, como é o caso de ensaios realizados com óleos base (livres de aditivos), o coeficiente de atrito não depende da rugosidade e da direção de acabamento. Nos ensaios lubrificados com óleos usado, encontraram-se valores de coeficiente de atrito similares aos obtidos nas condições de lubrificação com óleo livres de aditivos, devido provavelmente à redução do MoDTC no lubrificante como tem sido identificado por diferentes autores. Quando foram comparados os óleos usados contaminados com etanol com os óleos usados contaminados com gasolina, encontrou-se maior oxidação nestes últimos. Mesmo que estas diferenças de oxidação dos óleos não significaram diferenças em termos de atrito, estas podem ser importantes na medida em que óleos mais oxidados podem favorecer o desgaste oxidativo.

Relative Concerns on Visible Consumption: A Source of Economic Distortions

Do relative concerns on visible consumption give rise to economic distortions? We re-examine the question posited by Arrow and Dasgupta (2009) building upon their general framework but recognizing that relative concerns can only apply to visible goods (e.g., cars, clothing, jewelry) and that households consume both visible and non-visible goods. Contrary to Arrow and Dasgupta (2009), the answer to this question turns to be always affirmative: the competitive equilibrium will always be different than the socially optimal one, since individuals do not take into account the negative externality they exert on others through the consumption of the visible good, while the social planner does. If one invokes separability assumptions, then the steady state competitive equilibrium consumption of non-visible goods will be strictly lower than the socially optimal one.

Philadelphia, Pennsylvania, 1916 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Rand McNally new commercial atlas map of Philadelphia. It was published by Rand McNally & Co. in 1916. Scale [ca. 1:20,300]. Covers also a portion of Camden, New Jersey. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Pennsylvania South State Plane Coordinate System NAD83 (in Feet) (Fipszone 3702). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, subways and elevated street cars, drainage, selected public buildings, cemeteries, parks, wharves, and more. Includes indexes and inset: Philadelphia and vicinity. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

The EU regime on biofuels in transport: Still in search of sustainability. Egmont Paper No. 68, July 2014

Like other regions of the world, the EU is developing biofuels in the transport sector to reduce oil consumption and mitigate climate change. To promote them, it has adopted favourable legislation since the 2000s. In 2009 it even decided to oblige each Member State to ensure that by 2020 the share of energy coming from renewable sources reached at least 10% of their final consumption of energy in the transport sector. Biofuels are considered the main instrument to reach that percentage since the development of other alternatives (such as hydrogen and electricity) will take much longer than expected. Meanwhile, these various legislative initiatives have driven the production and consumption of biofuels in the EU. Biofuels accounted for 4.7% of EU transport fuel consumption in 2011. They have also led to trade and investment in biofuels on a global scale. This large-scale expansion of biofuels has, however, revealed numerous negative impacts. These stem from the fact that first-generation biofuels (i.e., those produced from food crops), of which the most important types are biodiesel and bioethanol, are used almost exclusively to meet the EU’s renewable 10% target in transport. Their negative impacts are: socioeconomic (food price rises), legal (land-grabbing), environmental (for instance, water stress and water pollution; soil erosion; reduction of biodiversity), climatic (direct and indirect land-use effects resulting in more greenhouse gas emissions) and public finance issues (subsidies and tax relief). The extent of such negative impacts depends on how biofuel feedstocks are produced and processed, the scale of production, and in particular, how they influence direct land use change (DLUC) and indirect land use change (ILUC) and the international trade. These negative impacts have thus provoked mounting debates in recent years, with a particular focus on ILUC. They have forced the EU to re-examine how it deals with biofuels and submit amendments to update its legislation. So far, the EU legislation foresees that only sustainable biofuels (produced in the EU or imported) can be used to meet the 10% target and receive public support; and to that end, mandatory sustainability criteria have been defined. Yet they have a huge flaw. Their measurement of greenhouse gas savings from biofuels does not take into account greenhouse gas emissions resulting from ILUC, which represent a major problem. The Energy Council of June 2014 agreed to set a limit on the extent to which firstgeneration biofuels can count towards the 10% target. But this limit appears to be less stringent than the ones made previously by the European Commission and the European Parliament. It also agreed to introduce incentives for the use of advanced (second- and third-generation) biofuels which would be allowed to count double towards the 10% target. But this again appears extremely modest by comparison with what was previously proposed. Finally, the approach chosen to take into account the greenhouse gas emissions due to ILUC appears more than cautious. The Energy Council agreed that the European Commission will carry out a reporting of ILUC emissions by using provisional estimated factors. A review clause will permit the later adjustment of these ILUC factors. With such legislative orientations made by the Energy Council, one cannot consider yet that there is a major shift in the EU biofuels policy. Bolder changes would have probably meant risking the collapse of the high-emission conventional biodiesel industry which currently makes up the majority of Europe’s biofuel production. The interests of EU farmers would have also been affected. There is nevertheless a tension between these legislative orientations and the new Commission’s proposals beyond 2020. In any case, many uncertainties remain on this issue. As long as solutions have not been found to minimize the important collateral damages provoked by the first generation biofuels, more scientific studies and caution are needed. Meanwhile, it would be wise to improve alternative paths towards a sustainable transport sector, i.e., stringent emission and energy standards for all vehicles, better public transport systems, automobiles that run on renewable energy other than biofuels, or other alternatives beyond the present imagination.

TTIP’s Hard Core: Technical barriers to trade and standards. Paper No. 13 in the CEPS-CTR project ‘TTIP in the Balance’ and CEPS Special Report No. 117/August 2015

Michelle Egan and Jacques Pelkmans provide an overview of the TBT chapter in TTIP and the various issues between the US and the EU in this area, which in turn requires extensive expositions of domestic regulation in the US and the EU. TBTs, outside heavily regulated sectors such as chemicals, automobiles or medicines (which have separate chapters in TTIP), can be caused by divergent (voluntary) standards, technical regulations and conformity assessment. Indeed, in all three the US and the EU have long experienced frictions with considerable trading costs. The 1998 Mutual Recognition Agreement about conformity assessment only succeeded in two out of six sectors. The US and European standardisation traditions differ and this paper explains why it is so hard, also economically, to realise convergence. However, the authors reject the unproductive ‘stand-off’ between US and EU negotiators on standardisation and suggest to clarify the enormous economic ‘installed base’ of prominent US standards in the world economy and build a solution from there. As to technical regulation, the prospect of converging regulation (via harmonisation) is often dim, but equivalence (given similar levels of regulatory protection) can be an option.

Quantifying Non-Tariff Measures for TTIP. Paper No. 12 in the CEPS-CTR project ‘TTIP in the Balance’ and CEPS Special Report No. 116/July 2015

This paper provides an overview of methods employed to quantify non-tariff measures (NTMs) and then analyses their differences and looks at what these mean for the Transatlantic Trade and Investment Partnership (TTIP) negotiations. The authors find several similarities in the approaches taken. Because all studies conclude that NTMs matter, they argue that policy-makers are right to focus on ‘regulatory cooperation’ in TTIP. Given the significant differences in NTMs across sectors, policy-makers are urged to dive deep into sector-specific elements of NTMs and focus on those sectors where the largest potential gains can be made (i.e. where NTMs are highest, such as in agriculture, automobiles, steel, textiles and insurance services). An area identified for further research is the fact that unlike trade taxes (i.e. tariffs), regulatory barriers to trade are not generally targeted as the primary policy objective, but rather stem from other strategic policy concerns such as consumer safety and/or social and environmental protection. This element should be further investigated.

Towards an Effective EU Framework for Road Transport and GHG Emissions. CEPS Special Report No. 141 / July 2016

The adoption of the Paris Agreement at the end of 2015 and the EU’s intended nationally determined contribution (INDC) have confirmed the EU’s commitment to achieve decarbonisation by 2050. Transport accounts for about a quarter of EU greenhouse gas (GHG) emissions, representing the second-largest source of GHG emissions in Europe after the energy sector. The transport sector will play a significant role in the EU’s efforts to decarbonise its economy in line with its international commitments. The purpose of this report is to examine different EU policy options to address transport emissions, with a special emphasis on passenger cars. It ‘thinks through’ the options that are currently assessed in the EU and considers how they could be put together in a comprehensive framework. The report concludes with a number of measures to lead EU transport decarbonisation policy. A distinction is made between i) no-regret options and ii) measures for consideration.

Segurança rodoviária infantil : conhecimentos e atitudes dos pais na utilização do sistema de retenção no recém-nascido

Enquadramento: A segurança é um direito da criança, que deve ser assegurado pelos pais e sociedade em geral, pois devido à sua vulnerabilidade estão sujeitas a um maior risco de lesões e morte. O transporte seguro de recém-nascidos/crianças em automóveis é uma preocupação, pois os acidentes de viação são a principal causa de mortalidade e morbilidade nesta faixa etária. Nos acidentes rodoviários, o uso correto de um sistema de retenção para crianças (SRC), desde o nascimento, constitui uma forma eficaz de proteção. Objetivos: Caracterizar os conhecimentos e atitudes dos pais no uso do SRC; analisar a influência do processo de aquisição e de informação dos pais sobre o uso do SRC; identificar a relação entre as variáveis sociodemográficas dos pais e o uso de SRC; determinar se os conhecimentos são mediadores das atitudes dos pais na utilização do SRC. Métodos: Estudo quantitativo, transversal, descritivo e correlacional, realizado numa amostra não probabilística, por conveniência de 112 pais de recém-nascidos, mães com média de idade de 30,37 anos (Dp=5,63) e pai 33,91 (Dp=6,09). Para recolha de informação utilizou-se um questionário, construído para o efeito, que os pais preencheram 24-48h após o parto durante os meses de março a maio de um centro hospitalar da região norte de Portugal. Resultados: Maioritariamente tinham como escolaridade o ensino secundário e entre 1 a 4 filhos. O SRC fazia parte do ―enxoval‖ do bebé em 54,5% dos participantes, destes, 72,3% já o tinha experimentado no automóvel e pretendiam usá-lo na alta desde a maternidade 97,3%. Contudo, apurou-se que apenas 47,3% o faria de forma adequada, apesar de 83% referir conhecer a legislação e todos reconhecerem que previne lesões em caso de acidente e 67% admitir ter conhecimentos adequados sobre SRC. Concluiu-se haver relação entre os conhecimentos e a idade e a escolaridade das mães, e pelos resultados obtidos, inferimos que melhores conhecimentos conduzem a melhores atitudes na utilização do SRC. Conclusões: Os resultados indicam que os conhecimentos dos pais sobre o uso adequado de SRC continuam insuficientes. Este facto justifica o investimento no ensino, treino e preparação dos pais para a alta segura desde a maternidade, momento particularmente sensível, e que será determinante nas atitudes de promoção da segurança rodoviária das crianças e adolescentes. Palavras-chave: Segurança; Recém-nascido; Sistema de retenção; Conhecimentos; Atitudes.

Addressing climate change under preferential trade agreements: Towards alignment of carbon standards under the Transatlantic Trade and Investment Partnership

With its wide coverage of economic spheres and the variety of trade and investment measures currently under negotiation, the Transatlantic Trade and Investment Partnership opens windows of opportunity for advancing action on climate change. We examine possible avenues and international trade law implications for an alignment of carbon-related standards between the EU and the US. We compare EU and US carbon emissions standards for cars and argue that negotiators should strive for a mutual recognition of their equivalence for a transitional period, while pursuing the goal of full harmonization at the level of the highest standards of two parties at some date in the future. This could be a way to balance between economic and environmental interests and harness economic incentives for the benefit of climate.

Putting Up a Big Front: Car Design and Size Affect Road-Crossing Behaviour

Previous research suggests that people tend to see faces in car fronts and that they attribute personality characteristics to car faces. In the present study we investigated whether car design influences pedestrian road-crossing behaviour. An immersive virtual reality environment with a zebra crossing scenario was used to determine a) whether the minimum accepted distance for crossing the street is larger for cars with a dominant appearance than for cars with a friendly appearance and b) whether the speed of dominant-looking cars is overestimated as compared to friendly-looking cars. Participants completed both tasks while either standing on the pavement or on the centre island. We found that people started to cross the road later in front of friendly-looking low-power cars compared to dominant-looking high-power cars, but only if the cars were relatively large in size. For small cars we found no effect of power. The speed of smaller cars was estimated to be higher compared to large cars (size-speed bias). Furthermore, there was an effect of starting position: From the centre island, participants entered the road significantly later (i. e. closer to the approaching car) and left the road later than when starting from the pavement. Similarly, the speed of the cars was estimated significantly lower when standing on the centre island compared to the pavement. To our knowledge, this is the first study to show that car fronts elicit responses on a behavioural level.

Swing Out

Daybook, image #28

Burton Tower from Rackham lobby

Albert Kahn, architect. Built 1936