Chemical composition of ultrabasites and composing minerals from the Tonga Trench

A petrologic-geochemical study (petrochemistry, contents of siderophile and certain lithophile elements, composition of rock-forming silicates and accessory chrome spinels) of ultrabasic rocks dredged from the arc side in the northern end of the Tonga deep-sea trench has been carried out. The ultrabasites included harzburgites and dunites. Peridotites show clearly manifested material characteristics of ultrabasic relicts strongly depleted in low-temperature basaltic components. It is suggested that they have arose in the high degree of partial melting (about 30%) of a matrix mantle source of the lherzolite type. Great similarity of the rocks studied with ultrabasites of many ophiolites that are widespread in folded belts indicates that young island arcs are among the most likely geodynamic environments of ophiolite generation.

Geochemistry of subducted volcaniclastic sediments from Mariana arc magmas

The phase relations of natural volcaniclastic sediments from the west Pacific Ocean were investigated experimentally at conditions of 3-6 GPa and 800-900 °C with 10 wt.% added H2O (in addition to ~ 10 wt.% structurally-bound H2O) to induce hydrous melting. Volcaniclastic sediments are shown to produce a sub-solidus assemblage of garnet, clinopyroxene, biotite, quartz/coesite and the accessory phases rutile ± Fe-Ti oxide ± apatite ± monazite ± zircon. Hydrous melt appears at temperatures exceeding 800-850 °C, irrespective of pressure. The melt-producing reaction consumes clinopyroxene, biotite and quartz/coesite and produces orthopyroxene. These phase relations differ from those of pelagic clays and K-bearing mid ocean ridge basalts (e.g. altered oceanic crust) that contain phengite, rather than biotite, as a sub-solidus phase. Despite their relatively high melt productivity, the wet solidus for volcaniclastic sediments is found to be higher (825-850 °C) than other marine sediments (700-750 °C) at 3 GPa. This trend is reversed at high-pressure conditions (6 GPa) where the biotite melting reaction occurs at lower temperatures (800-850 °C) than the phengite melting reaction (900-1000 °C). Trace element data was obtained from the 3 GPa run products, showing that partial melts are depleted in heavy rare earth elements (REE) and high field strength elements (HFSE), due to the presence of residual garnet and rutile, and are enriched in large ion lithophile elements (LILE), except for Sr and Ba. This is in contrast to previous experimental studies on pelagic sediments at sub-arc depths, where Sr and Ba are among the most enriched trace elements in glasses. This behavior can be partly attributed to the presence of residual apatite, which also host some light REE in our supra-solidus residues. Our new experimental results account for a wide range of trace element and U-series geochemical features of the sedimentary component of the Mariana arc magmas, including imparting a substantial Nb anomaly to melts from an anomaly-free protolith.

Geochemistry of samples from Valtournenche, Western Italian Alps

Slices of polycyclic metasediments (marbles and meta-cherts) are tectonically amalgamated with the polydeformed basement of the Dent Blanche tectonic system along a major Alpine shear zone in the Western Alps (Becca di Salé area, Valtournenche Valley). A combination of techniques (structural analysis at various scales, metamorphic petrology, geochronology and trace element geochemistry) was applied to determine the age and composition of accessory phases (titanite, allanite and zircon) and their relation to major minerals. The results are used to reconstruct the polyphase structural and metamorphic history, comprising both pre-Alpine and Alpine cycles. The pre-Alpine evolution is associated with low-pressure high-temperature metamorphism related to Permo-Triassic lithospheric thinning. In meta-cherts, microtextural relations indicate coeval growth of allanite and garnet during this stage, at ~ 300 Ma. Textures of zircon also indicate crystallization at HT conditions; ages scatter from 263-294 Ma, with a major cluster of data at ~ 276 Ma. In impure marble, U-Pb analyses of titanite domains (with variable Al and F contents) yield apparent 206Pb/238U dates range from Permian to Jurassic. Chemical and isotopic data suggest that titanite formed at Permian times and was then affected by (extension-related?) fluid circulation during the Triassic and Jurassic, which redistributed major elements (Al and F) and partially opened the U-Pb system. The Alpine cycle lead to early blueschist facies assemblages, which were partly overprinted under greenschist facies conditions. The strong Alpine compressional overprint disrupted the pre-Alpine structural imprint and/or reactivated earlier structures. The pre-Alpine metamorphic record, preserved in these slices of metasediments, reflects the onset of the Permo-Triassic lithospheric extension to Jurassic rifting.

Phycoerythrin concentration during POLARSTERN cruises ANT-XXIV/4, ANT-XXV/1, and ANT-XXVI/4

Phycobiliproteins are a family of water-soluble pigment proteins that play an important role as accessory or antenna pigments and absorb in the green part of the light spectrum poorly used by chlorophyll a. The phycoerythrins (PEs) are one of four types of phycobiliproteins that are generally distinguished based on their absorption properties. As PEs are water soluble, they are generally not captured with conventional pigment analysis. Here we present a statistical model based on in situ measurements of three transatlantic cruises which allows us to derive relative PE concentration from standardized hyperspectral underwater radiance measurements (Lu). The model relies on Empirical Orthogonal Function (EOF) analysis of Lu spectra and, subsequently, a Generalized Linear Model with measured PE concentrations as the response variable and EOF loadings as predictor variables. The method is used to predict relative PE concentrations throughout the water column and to calculate integrated PE estimates based on those profiles.

Geochemistry of vein rocks of ODP Hole 118-735B

Rock samples from Hole 735B, Southwest Indian Ridge, were examined to determine the principal vein-related types of alteration that occurred, the nature of fluids that were present, and the temperatures and pressures of these fluids. Samples studied included veined metagabbro, veined mylonitic metagabbro, felsic trondhjemite, and late-stage leucocratic diopside-bearing veins. The methods used were standard petrographic analysis, mineral chemical analysis by electron microprobe, fluid inclusion petrography and analysis by heating/freezing techniques and laser Raman microspectroscopy, and oxygen isotopic analyses of mineral separates. Alteration in lithologic Units I and II (above the level of Core 118-735B-3OR; approximately 140 meters below the seafloor) is dominated by hydration by seawater-derived fluids at high temperature, up to about 700°C, and low water/rock ratio, during and immediately after pervasive ductile deformation. Below Core 118-735B-30R, pervasive deformation is less common, and brittle veining and brecciation are the major alteration styles. Leucocratic centimeter-scale veins, often containing diopside and plagioclase, were produced by interaction of hot (about 500°C) seawater-derived fluid and gabbro. The water/rock ratio was locally high at the veins and breccia zones, but the integrated water/rock ratio for the lower part of the hole is probably low. Accessory hydrous magmatic or deuteric phases formed from magmatic volatiles in some gabbro and in trondhjemite. Most subsequent alteration was affected by fluids that were seawater-derived, based on isotopic and chemical analyses of minerals and analyses of fluid inclusions. Many early-generation fluid inclusions, associated with high-temperature veining, contain appreciable methane as well as saline water. The source of methane is unclear, but it may have formed as seawater was reduced during low water/rock interaction with ultramafic upper mantle or ultramafic and mafic layer 3. Temperatures of alteration were calculated on the basis of coexisting mineral chemistry and isotopic values. Hydrothermal metamorphism commenced at about 720°C and continued to about 550°C. Leucocratic veining took place at about 500°C. Alteration within brecciated horizons was also at about 500° to less than 400°C, and the trondhjemite was altered at about 550° to below 490°C. Pressures calculated from a diopside-bearing vein, based on a combination of fluid inclusion and isotopic analysis, were 90 to 100 MPa. This pressure places the sample, from Core 118-735B-70R in Unit V, at about 2 km below the seafloor.

Mineralogical and geochemical analyses of serpentines from ODP Hole 125-778A

Thirty-five samples from Hole 778A were prepared for X-ray diffraction (XRD) mineralogical analyses and for chemical analyses of major and trace elements. Most of the selected samples were silt- and sand-sized sedimentary serpentinites or microbreccias except for a soft clast of mafic rock, a hard clast of massive serpentinized peridotite, and a pebble of consolidated, undeformed serpentine microbreccia that contained planktonic foraminifers. Both mineralogical and geochemical analyses allow discrimination of three groups among the analyzed samples. These groups correspond to three stratigraphic intervals present along the drilled section. Group A contains the upper samples (lithologic Unit I). These consist of poorly consolidated serpentine muds carrying hard-rock clasts (serpentinized peridotites, metabasalts). They are characterized by the following mineralogical assemblage: serpentine, Fe-oxides and hydroxides, aragonite, and halite. They exhibit variable SiO2, MgO contents, but are characterized by a SiO2/MgO ratio near 1. CaO content is high in relation to development of aragonite. Al2O3 content is low. Relatively high K2O, Na2O, and Sr contents are present, presumably in relation to interactions with seawater. Group B (30-77 mbsf) contains samples exhibiting very homogeneous chemical and mineralogical compositions. They consist of serpentinite microbreccias exhibiting frequent shear structures. Hard-rock clasts are also present (serpentinized peridotites, metabasalts, one possible chert fragment). The mineralogy of the Group B samples is characterized by the presence of serpentine and authigenic minerals: hydroxycarbonates and hydrogrossular. Calcite and chlorite are also present, but all the samples lack aragonite. Their chemical compositions are remarkably similar to compositions of their parent rocks. Group C contains silt- and sand-sized serpentine and serpentine microbreccias, which are locally rich in red clasts, probably strongly altered (oxidized?) mafic fragments. Intervals having clasts of more diverse origin than those higher in the section were recovered. Clast lithology includes serpentinized peridotites, metabasalts, metavolcaniclastite, meta-olivine gabbro, and amphibolite sandstone. Mineralogy and geochemistry reflect these compositions. Serpentine content of the samples is less than in previous groups. Correlatively, sepiolite, palygorskite, and chlorite-smectite are mineral phases present in the analyzed samples. Accessory igneous minerals (amphiboles, pyroxenes, hematite) also were found. The chemical compositions of most of Group C samples differ from that of massive serpentinized peridotites. The main differences are (1) higher SiO2, CaO, TiO2 and Al2O3 contents, (2) a SiO2/MgO ratio greater than 1, and (3) a negative correlation between Al2O3, and MgO, Cr, and Ni. These characteristics suggest new constraints relative to the flow structure of the flank of Conical Seamount.

Upper Cretaceous sediments of ODP Hole 122-762C

Well-developed Campanian to Maestrichtian pelagic cyclic sediments were recovered from Hole 762C on the Exmouth Plateau, off northwest Australia, during Ocean Drilling Program Leg 122. The cycles consist of nannofossil chalk (light beds) and clayey nannofossil chalk (dark beds). Both light and dark beds are strongly to moderately bioturbated, alternate on a decimeter scale, and exhibit gradual boundaries. Bioturbation introduces materials from a bed of one color into an underlying bed of another color, indicating that diagenesis is not responsible for the cyclicity. Differences in composition between the light and dark beds, revealed by calcium carbonate measurement and X-ray diffraction analysis, together with trace fossil evidence, indicate that the cycles in the sediments are a depositional feature. Diagenetic processes may have intensified the appearance of the cycles. Spectral analysis was applied to the upper Campanian to lower Maestrichtian cyclic sediments to examine the regularity of the cycles. Power spectra were calculated from time series using Walsh spectral analysis. The most predominant wavelengths of the color cycles are 34-41 cm and 71-84 cm. With an average sedimentation rate of 1.82 cm/k.y. in this interval, we found the time durations of the cycles to be around 41 k.y. and 21 k.y., respectively, comparable to the obliquity and precession periods of the Earth's rotation, which strongly suggests an orbital origin for the cycles. On the basis of sedimentological evidence and plate tectonic reconstruction, we propose the following mechanism for the formation of the cyclic sediments from Hole 762C. During the Late Cretaceous, when there was no large-scale continental glaciation, the cyclic variations in insolation, in response to cyclic orbital changes, controlled the alternation of two prevailing climates in the area. During the wetter, equable, and warmer climatic phases under high insolation, more clay minerals and other terrestrial materials were produced on land and supplied by higher runoff to a low bioproductivity ocean, and the dark clayey beds were deposited. During the drier and colder climatic phases under low insolation, fewer clay minerals were produced and put into the ocean, where bioproductivity was increased and the light beds were deposited.

Hydrochemistry, phytoplankton pigment concentration and phytoplankton abundance in water samples obtained in the Kuroshio Extension Front in October 2009

This data was collected during a cruise to the Kuroshio Extension Front in October 2009. Several chemical and biological parameters were measured: dissolved nutrients, picophytoplankton (by flow cytometry), microphytoplankton (by light microscopy) and phytoplankton pigments (HPLC).

Specific skills assessment learned by students of building engineering and technical architecture in topics relating to durability and control of concrete structures

In many university courses such as Building Engineering or Technical Architectural, the high density of the contents included in the curriculum, make the student, after graduation, unable to develop the skills already acquired and evaluated in the disciplines of the first courses. From the Group of Educational Innovation at the Polytechnic University of Madrid (UPM) "Teaching of Structural Concrete" (GIEHE) we have conducted a study in which are valued specific skills acquired by students after the first courses of career. We have worked with students from UPM fourth-year career and with Technical Architecture students who have completed their studies and also have completed the Adaptation Course of Technical Architecture to the Building Engineer. The work is part of the Educational Innovation Project funded by the UPM "Integration of training and assessment of generic and specific skills in structural concrete" We have evaluated specific skills learned in the areas of durability and control of structural concrete structures. The results show that overall, students are not able to fully develop the skills already acquired earlier, even being these essential to their professional development. Possibly, the large amount of content taught in these degrees together with a teaching and assessment of "flat profile", ie, which are presented and evaluated with the same intensity as the fundamental and the accessory, are causes enough to cause these results.

Discovery of ferromanganese hydrocarbon-related nodules associated with the Meknes mud volcano (Western Moroccan margin)

A suite of ferromanganese nodules were sampled during the MVSEIS-2008 cruise aboard of the R/V Hespérides in the flanks of Meknes mud volcano (Moroccan margin, NE Central Atlantic). The nodules were collected at water depths between 750-850 m within a seabed area characterized by high acoustic backscatter values. Debris of cold water corals and hydrocarbon-derived authigenic carbonate crusts were sampled at same time. The nodules show tabular morphology, up to 20 cm in maximum diameter and 2 kg of weight, brown-reddish external color and they are internally composed by a concentric to complex arrangement of laminae. The results of X-ray diffraction analysis show that these ferromanganese nodules are essentially composed of goethite and lepidocrocite, being Mn-oxides, silicates (quartz and clay minerals) and carbonates (calcite, dolomite and siderite) accessory to occasional minerals. All the samples display micritic to micro-sparitic mosaic under the petrographic microscope which forms massive, laminated or dendritic-mottled textures. The nodules show a high abundance of Fe, minor Mn and low contents of trace metals and REEs. Mature hydrocarbons, as n-alkanes derived from marine bacterial activity, and phenanthrene have been detected in all the ferromanganese nodules analyzed. These nodules display analogous characteristics (textural, mineralogical and geochemical) to the nodules studied by González et al (2009) in the carbonate mud-mounds in the Gulf of Cadiz, offshore Iberian margin. In this way, the same preliminary genetic model proposed for these nodules might be applicable to those find in the Meknes mud volcano. Therefore, the anaerobic oxidation of hydrocarbon-rich fluids within the mud-breccia sediments in the flanks of Meknes mud volcano would induce the formation of early diagenetic Fe-(Mn) carbonate nodules. Thus, the nodules were later exhumed by the erosive action of sea bottom currents generating the replacement of ferromanganese carbonates by Fe-Mn oxy-hydroxides. Thus, the hydrocarbon-rich fluid venting from deep seated reservoirs and erosive action of bottom currents must have been essential actors, as mineralization controls, for ferromanganese nodules generation and evolution. These findings imply that this type of nodules must be considered as new product as derived from the anaerobic/aerobic oxidation of hydrocarbons in areas of active seepages.

Computational Study of the Fe(CN)(2)CO Cofactor and Its Binding to HypC Protein.

In the intricate maturation process of [NiFe]-hydrogenases, the Fe(CN)2CO cofactor is first assembled in a HypCD complex with iron coordinated by cysteines from both proteins and CO is added after ligation of cyanides. The small accessory protein HypC is known to play a role in delivering the cofactor needed for assembling the hydrogenase active site. However, the chemical nature of the Fe(CN)2CO moiety and the stability of the cofactor–HypC complex are open questions. In this work, we address geometries, properties, and the nature of bonding of all chemical species involved in formation and binding of the cofactor by means of quantum calculations. We also study the influence of environmental effects and binding to cysteines on vibrational frequencies of stretching modes of CO and CN used to detect the presence of Fe(CN)2CO. Carbon monoxide is found to be much more sensitive to sulfur binding and the polarity of the medium than cyanides. The stability of the HypC–cofactor complex is analyzed by means of molecular dynamics simulation of cofactor-free and cofactor-bound forms of HypC. The results show that HypC is stable enough to carry the cofactor, but since its binding cysteine is located at the N-terminal unstructured tail, it presents large motions in solution, which suggests the need for a guiding interaction to achieve delivery of the cofactor.

Evolución de la vegetación en el sector biogeográfico Castellano Cantábrico durante el Cuaternario Final, a través del registro tobáceo

En esta memoria de Tesis Doctoral se aborda el estudio paleobotánico de seis yacimientos tobáceos situados en las localidades burgalesas de Tubilla del Agua, Sedano, Herrán, Tobera y Frías, y en la alavesa de Ocio. El registro fósil encontrado en estos afloramientos se analiza de forma conjunta con el objetivo de conocer la evolución de la vegetación en el sector biogeográfico Castellano Cantábrico. Este sector se considera el territorio para el cual los hallazgos paleobotánicos son representativos y extrapolables, en tanto que constituye una región homogénea desde el punto de vista florístico, que abarca todos los yacimientos prospectados. El contexto temporal en el que se enmarca este estudio es el final del Cuaternario, desde el Pleistoceno Medio hasta la actualidad. Este intervalo se ha establecido a partir de la edad de los depósitos estudiados, la cual ha sido determinada —para los yacimientos de los que no se disponía de edades fiables— mediante la datación de muestras extraídas de las diferentes unidades litológicas identificadas. Para ello han sido empleadas las técnicas de carbono-14, desequilibrio de las series del uranio y racemización de aminoácidos. Los resultados geocronológicos obtenidos junto con el análisis geomorfológico de los yacimientos han permitido vincular la génesis de las 13 unidades litológicas identificadas con diferentes estadíos climáticos. Estos abarcan un amplio rango de condiciones ambientales, desde las más extremas del Último Máximo Glacial, hasta las más benignas de los Estadíos Isotópicos Marinos interglaciares 1 y 5. Como resultado de la prospección de los depósitos de toba fueron recuperados 1.820 fósiles, la mayoría impresiones foliares, pero también moldes de estróbilos femeninos, ramas y corteza, así como 42 carbones y restos subfósiles de Pinus sp. La identificación taxonómica de estos restos se ha realizado fundamentalmente a partir del análisis de caracteres diagnósticos morfológicos. Como resultado de ello, han sido descritos 28 taxones pertenecientes a las subclases Bryidae, Polypodiidae, Pinidae y Magnoliidae. La flora de los yacimientos estudiados se puede clasificar en tres grupos en función de sus requerimientos ecológicos: (i) uno formado por dos especies de alta tolerancia a la continentalidad —Pinus nigra y Quercus faginea—, las cuales aparecen bien representadas en la mayoría de los depósitos; (ii) otro constituido fundamentalmente por un conjunto de árboles y arbustos que habitualmente tienen el papel de especies acompañantes en los bosques ibéricos submediterráneos y eurosiberianos; y (iii) un tercer grupo compuesto por taxones hidrófitos o edafohigrófilos asociados al ecosistema del fitohermo activo y la vegetación de ribera. En el capítulo de Discusión se propone y analiza la hipótesis de que P. nigra y Q. faginea habrían sido las especies protagonistas de la vegetación zonal del sector Castellano Cantábrico durante el Cuaternario Final. Estas podrían haber persistido como tal incluso durante las épocas más frías, debido a su amplia valencia ecológica y a la capacidad de reproducirse vegetativamente en el caso del quejigo. Por el contrario, los taxones mesofíticos y eurosiberianos pudieron haber sufrido la expansión y retracción de sus poblaciones al ritmo de las oscilaciones climáticas. Sin embargo, la orografía diversa del sector Castellano Cantábrico proporciona emplazamientos en los que se combinan las diversas variables fisiográficas, de tal forma que pudieron haber existido microrrefugios en los que encontraron cobijo algunos taxones mesotérmicos y eurosiberianos durante los periodos glaciales. Por último, la historia evolutiva reciente de la vegetación de este territorio ha estado marcada por la acción antrópica, la cual empezó a ser manifiesta a partir del Neolítico. Esta se tradujo en la degradación y reducción de la cubierta forestal, así como en la extinción del pino laricio del Sector Castellano Cantábrico en los dos últimos milenios. ABSTRACT This PhD Dissertation focuses in the study of six tufa formations located nearby the villages of Tubilla del Agua, Sedano, Herrán, Tobera y Frías, all of them in the province of Burgos, and Ocio, which belongs to the province of Álava. We analyze the palaeobotanical archives of these sites with the purpose of unveiling and understanding the evolution of the vegetation of the Castilian Cantabrian biogeographical sector. This area is considered to be the territory that is represented in the palaeobotanical sample of the studied tufa archives. It is the homogeneous phitogeographical area with the lowest rank that include all the sites. The time frame of this study is the last part of the Quaternary, since the Middle Pleistocene to the present time. This interval is defined by the age of the tufa deposits, which were dated —for the ones that there were not available datings— throughout the analysis of 20 tufa samples taken from the 13 identified lithostratigraphic units. The age of the samples has been determined by using the methods of radiocarbon, U-Th dating and amino acid racemization. Chronological results, along with the chronostratigraphic study of the sites has allowed us to relate the build-up of the 13 identified lithostratigraphic units with different climatic stages. These structures were deposited in a wide range of climatic conditions, from the most extreme ones of the Last Glacial Maximum, to the warmer ones of the Marine Isotopic Stages 1 and 5. A total of 1,820 fossils were recovered from the tufa deposits, most of them were leaf impressions, but also pine cones, branches and bark moulds, along with charcoal and Pinus nigra macro remains. The taxonomical identification of these remains has been done mainly through the analysis of morphological traits. As a result of this process, 28 taxa belonging to the subclass of Bryidae, Polypodiidae, Pinidae and Magnoliidae were identified. The persistency of some taxa can be traced along different climatic stages in this fossil record. This fossil flora can be classified in three different groups: (i) the first one would be composed of two species with high continental climate tolerance —Pinus nigra y Quercus faginea—, which can be found in most of the deposits, (ii) the second group would be mostly formed by trees and shrubs that usually grow in the Iberian forests as an accessory species and (iii) the third one is composed of hydrophytes or hydrophilic taxa associate to the streams, riparian zones or the active tufa ecosystem. In the Discussion chapter we propose and analyse the hypothesis that P.nigra and Q. faginea were the main species of the zonal vegetation of the Castilian Cantabrian biogeographical sector during the last part of the Quaternary. This species could have persisted due to their wide ecological amplitude and also due to the capacity of asexual reproduction in the cases of the oak. On the other hand, mesophitic taxa could have suffered the retraction and expansion of their population following the climate oscillations. However, the diverse orography of the Castilian Cantabrian biogeographical sector provides a variety of combinations of physiographic variables, which could have been suitable refuges for some of the mesophitic taxa. The recent evolutionary history of the vegetation in this territory has been affected by human activities, which started to be relevant since the Neolithic. This led to a reduction of the forests and eventually, to the extinction of P. nigra in the Castilian Cantabrian biogeographical sector in the last two thousands of years.

DETERMINAÇÃO DAS FORMAS DO ARCO DENTÁRIO INFERIOR NA OCLUSÃO NORMAL NATURAL

Com a finalidade de determinar as formas do arco dentário inferior de maior incidência na oclusão normal natural, utilizou-se um método matemático associado ao emprego de uma função polinomial, o qual foi aplicado a 63 modelos de arcadas inferiores selecionados a partir de 6118 adolescentes. Todos os indivíduos eram portadores de dentição permanente, incluindo os segundos molares, e oclusão normal natural. Em cada dente foi fixada uma esfera de vidro, que teve a função de simular o acessório do aparelho ortodôntico, sendo utilizada na medição das distâncias entre o centro da imagem dessas esferas aos eixos x e y. Após a digitalização dos modelos de gesso, as imagens foram plotadas em um programa de computador, a fim de se obterem a função polinomial de sexto grau e o gráfico dessa função para os 126 segmentos de curva, originados das secções das imagens em lado direito e esquerdo. A seguir organizaram-se esses segmentos, de acordo com as características da curvatura anterior dos arcos dentários, em oito grupos diferentes de formas, que receberam as denominações de Forma A, Forma B, Forma C, Forma D, Forma E, Forma F, Forma G, Forma H. Cada grupo foi, então, dividido em três subgrupos, conforme os tamanhos pequeno, médio e grande. Os resultados indicaram 23 formas representativas do arco dentário inferior e uma forma média para a oclusão normal natural.

DETERMINAÇÃO DAS FORMAS DO ARCO DENTÁRIO INFERIOR NA OCLUSÃO NORMAL NATURAL

Com a finalidade de determinar as formas do arco dentário inferior de maior incidência na oclusão normal natural, utilizou-se um método matemático associado ao emprego de uma função polinomial, o qual foi aplicado a 63 modelos de arcadas inferiores selecionados a partir de 6118 adolescentes. Todos os indivíduos eram portadores de dentição permanente, incluindo os segundos molares, e oclusão normal natural. Em cada dente foi fixada uma esfera de vidro, que teve a função de simular o acessório do aparelho ortodôntico, sendo utilizada na medição das distâncias entre o centro da imagem dessas esferas aos eixos x e y. Após a digitalização dos modelos de gesso, as imagens foram plotadas em um programa de computador, a fim de se obterem a função polinomial de sexto grau e o gráfico dessa função para os 126 segmentos de curva, originados das secções das imagens em lado direito e esquerdo. A seguir organizaram-se esses segmentos, de acordo com as características da curvatura anterior dos arcos dentários, em oito grupos diferentes de formas, que receberam as denominações de Forma A, Forma B, Forma C, Forma D, Forma E, Forma F, Forma G, Forma H. Cada grupo foi, então, dividido em três subgrupos, conforme os tamanhos pequeno, médio e grande. Os resultados indicaram 23 formas representativas do arco dentário inferior e uma forma média para a oclusão normal natural.

ESTUDO COMPARATIVO DA POSIÇÃO ÂNTERO POSTERIOR DOS PRIMEIROS MOLARES INFERIORES NO TRATAMENTO ORTODÔNTICO, UTILIZANDO AS TÉCNICAS STRAIGHT-WIRE E EDGEWISE, EM CASOS DE MÁ OCLUSÃO DE CLASSE I DE ANGLE, COM EXTRAÇÃO DE PRIMEIROS PRÉ-MOLARES

Este estudo avaliou o posicionamento ântero posterior dos primeiros molares inferiores, durante o tratamento ortodôntico, utilizando o arco lingual inferior como acessório de ancoragem na técnica Straight-Wire, em comparação aos casos tratados pela técnica Edgewise, sem a utilização do arco lingual. Dois grupos foram selecionados, ambos apresentando má oclusão de Classe I de Angle7, tratados com extração dos primeiros pré-molares superiores e inferiores. Foi utilizada uma amostra de 255 telerradiografias em norma lateral, obtidas de pacientes brasileiros, de ambos os sexos, com média de idade de 13 anos e 6 meses e com diferentes padrões de crescimento facial. Embasado na análise e discussão dos resultados, concluiu-se que: 1) do início do tratamento ao fim da fase de nivelamento, a perda de ancoragem coronária do primeiro molar inferior foi maior nos casos tratados com a técnica Straight-Wire; 2) do fim da fase de nivelamento ao fim do tratamento, a perda de ancoragem coronária e radicular do primeiro molar inferior foi maior na técnica Edgewise; 3) do início ao fim tratamento a perda de ancoragem radicular foi maior nos pacientes tratados com a técnica Edgewise; e 4) o deslocamento ântero-posterior dos incisivos inferiores não apresentou diferença estatisticamente significante para ambas as técnicas, em todas as etapas observadas.(AU)