Designing in caves: using immersive visualisations in design practice

This paper describes a study of the use of immersive Virtual reality technologies in the design of a new hospital. It uses Schön’s concept of reflective practice and video-based methods to analyse the ways design teams approach and employ a full scale 3D immersive environment – a CAVE – in collaborative design work. The analysis describes four themes relating to reflective practice occurring in the setting: orienting to the CAVE technology itself, orienting to the representation of the specific design within the CAVE, activities accounting for, or exploring alternatives within the design for the use and users of the space, and more strategic interactions around how to best represent the design and model to the client within the CAVE setting. The analysis also reveals some unique aspects of design work in this environment. Perhaps most significantly, rather than enhancing or adding to an existing understanding of design through paper based or non-immersive digital representations, it is often acting to challenge or surprise the participants as they experience the immersive, full scale version of their own design.

Future, Fortune, and the graphic design of information

This is a study of graphic information designed for Future Books/Future magazine (UK) and Fortune magazine (USA) in the years immediately after the Second World War. It highlights work made by the Isotype Institute for Future, which is then situated against contributions by Abram Games and F. H. K. Henrion. Similar work in Fortune under the art editorship of Will Burtin is discussed in a parallel account, drawing on examples by him and by others including György Kepes, Matthew Liebowitz, Alex Steinweiss and Ladislav Sutnar. Attention is drawn to links and relationships between to the two periodicals and the graphic information published in both. Further comparisons are made between underlying editorial and design strategies pursued by Otto Neurath (Isotype Institute) and Will Burtin. An argument is made for recognising the little-known innovations of Future alongside the long-acknowledged innovations of Fortune.

Design (provisional chapter title)

The move of parts of OUP's publishing operation from London to Oxford in the 1970s allowed the creation of a centralised art and design department. Drawing on material in the OUP archives this chapter traces the kinds of work that this department undertook and the subsequent devolution of design activities to publishing divisions. Book design at Oxford is considered both stylistically and in response to technological changes. The relationship with the Printing House and its design standards, the search for standardisation and the need for economy, and the specialist design skills demanded by OUP's publications are recurring themes. Innovations in using overseas suppliers and in the introduction of desktop publishing technology are located in relation the the organization of the design function at OUP and its relationship to editorial policies.The chapter concludes with a consideration of the corporate identity system introduced in 1998, and its relationship to previous manifestations of 'Oxford style'.

Categories & order systems: Claude Parent and The Serving Library intersections of architecture, art and editorial design

This paper discusses the work of Claude Parent and The Serving Library, considering the critiques generated by their intersecting of architecture, art and editorial design. Through focus on the ways in which hosting environment, architecture and forms of expanded publishing can serve to dissolve disciplinary boundaries and activities of production, spectatorship and reception, it draws on the lineage of 1960s/70s Conceptual Art in considering these practices as a means through which to escape medium specificity and spatial confinement. Relationships between actual and virtual space are then read against this broadening of aesthetic ideas and the theory of critical modernity.

Task design and interaction in collaborative writing: the students’ story

This article investigates student behaviour on collaborative assignments, looking at the relationship between task type and interaction, and considers the implications for task design. Students reported on interactions in a year-long workplace-focussed group communication project, comparing these with interactions on other academy based group assignments. Differences were seen in the amount of brainstorming, the criteria for dividing up work, the intensity of editing, and how conflict was managed. Contributing factors to these differences included the presence or absence of a creative element, the instrumental nature of the task, and the need for a collective approach inherent in the task design.

Aligning IS programs with industry: linking business analysis curricula design with the professional body

Aligning information systems (IS) solutions with business goals and needs are crucial for IS activities. IS professionals who are able to work closely with both the business and technical staff are key enablers of business and IT alignment. IS programs in higher education (HE) institutions have a long tradition of enabling graduates to develop the appropriate skills needed for their future careers. Yet, organizations are still having difficulty finding graduates who possess both the knowledge and skills that are best suited to their specific requirements. Prior studies suggest that IS curricula are often ill-matched with industry/business needs. This study reports on the business analysis curricula (re) design which was undertaken to align it with a key professional body for the IS industry. This study presents the approaches taken in the (re) design of the module, and provides a discussion of the wider implications for IS curricula design. The results show a positive outcome for the HE and professional body partnership.

Design Management för Remote Control Sweden AB

This Degree Project is a cooperativ work with the advertising agency PAX in Falun and the industrial companyRemote Control, who constructs and sells actuators for the global market.The assignment concerns bringing out a graphic profile, or with another expression a Design Management, forRemote Control AB graphic materials. Remote Control AB has a quality certification ISO 9000 and is workingwith, when this report was wrote, an environment certification ISO 14001.The Company has been paid attention to Internet and other media.The supervisors are familiar to that Design Management is a soon coming competition element, like quality andenvironment management.This Degree project contains research, analysis and the construction of graphic material. The research has beencommitted most of the time to trace the customer, the market and the competitor, because its the most importantphase. It’s also important looking at competitor’s way of working with marketing management, so you can separatethem from the own company.

Corporate identity through graphic design

The degree project has been implemented abroad in Brisbane, Australia. A literature study has beenperformed parallel to the practical work within the subject »Corporate identity through graphicaldesign«. In this study deeper research has been made concerning the establishment and manifestationof a corporate identity and its program. The knowledge given from this study has been put into practicethrough two larger projects.The first project was carried out at De Pasquale, advertising agency in Brisbane, where a corporateidentity program was designed for a new company. The company is a fitness centre, called KnockoutFitness, which specializes in different types of boxing training sessions such as Boxing, Thai Bow andBoxercise but also Aqua aerobics. They needed a full corporate identity program including a logotype,business card, letter paper-paper and address labels.The second project was carried out at Queensland University of Technology in Brisbane. A promotioncampaign was designed for the Department of Visual Arts, which included two information folders andone advertisement. The purpose of the campaign was to promote both the undergraduate and postgraduatecourses offered within the department.

Acoustic Design in Urban Development : analysis of urban soundscapes and acoustic ecology research in New York City

The world is urbanizing rapidly with more than half of the global population now living in cities. Improving urban environments for the well-being of the increasing number of urban citizens is becoming one of the most important challenges of the 21st century. Even though it is common that city planners have visions of a ’good urban milieu’, those visions are concerning visual aesthetics or practical matters. The qualitative perspective of sound, such as sonic diversity and acoustic ecology are neglected aspects in architectural design. Urban planners and politicians are therefore largely unaware of the importance of sounds for the intrinsic quality of a place. Whenever environmental acoustics is on the agenda, the topic is noise abatement or noise legislation – a quantitative attenuation of sounds. Some architects may involve acoustical aspects in their work but sound design or acoustic design has yet to develop to a distinct discipline and be incorporated in urban planning.My aim was to investigate to what extent the urban soundscape is likely to improve if modern architectural techniques merge with principles of acoustics. This is an important, yet unexplored, research area. My study explores and analyses the acoustical aspects in urban development and includes interviews with practitioners in the field of urban acoustics, situated in New York City. My conclusion is that to achieve a better understanding of the human living conditions in mega-cities, there is a need to include sonic components into the holistic sense of urban development.

Energy Analysis within Industrial Hydraulics and Correspondent Solar PV System Design

Energy efficiency and renewable energy use are two main priorities leading to industrial sustainability nowadays according to European Steel Technology Platform (ESTP). Modernization efforts can be done by industries to improve energy consumptions of the production lines. These days, steel making industrial applications are energy and emission intensive. It was estimated that over the past years, energy consumption and corresponding CO2 generation has increased steadily reaching approximately 338.15 parts per million in august 2010 [1]. These kinds of facts and statistics have introduced a lot of room for improvement in energy efficiency for industrial applications through modernization and use of renewable energy sources such as solar Photovoltaic Systems (PV).The purpose of this thesis work is to make a preliminary design and simulation of the solar photovoltaic system which would attempt to cover the energy demand of the initial part of the pickling line hydraulic system at the SSAB steel plant. For this purpose, the energy consumptions of this hydraulic system would be studied and evaluated and a general analysis of the hydraulic and control components performance would be done which would yield a proper set of guidelines contributing towards future energy savings. The results of the energy efficiency analysis showed that the initial part of the pickling line hydraulic system worked with a low efficiency of 3.3%. Results of general analysis showed that hydraulic accumulators of 650 liter size should be used by the initial part pickling line system in combination with a one pump delivery of 100 l/min. Based on this, one PV system can deliver energy to an AC motor-pump set covering 17.6% of total energy and another PV system can supply a DC hydraulic pump substituting 26.7% of the demand. The first system used 290 m2 area of the roof and was sized as 40 kWp, the second used 109 m2 and was sized as 15.2 kWp. It was concluded that the reason for the low efficiency was the oversized design of the system. Incremental modernization efforts could help to improve the hydraulic system energy efficiency and make the design of the solar photovoltaic system realistically possible. Two types of PV systems where analyzed in the thesis work. A method was found calculating the load simulation sequence based on the energy efficiency studies to help in the PV system simulations. Hydraulic accumulators integrated into the pickling line worked as energy storage when being charged by the PV system as well.

Equal Couples in Equal Houses : Cultural perspectives on Swedish solar and bio-pellet heating design

Knowing how to design a heating system that will work mechanically is quite different from knowling how to design a system that users perceive as responsive to their domestic practices and values. In this chapter, social anthropologist Henning argues that the challenge for designers involved in the development or marketing of green buildings with heating systems that are based on renewable sources of energy is to see things from the perspective of those who are supposed to live in these buildings. The chapter focuses on three culture-specific aspects of Swedish households and single-family houses: perceptions of house and home, of private and public space, and of male and female space. Through these three angles, some clues are given as to how design, performance and location of solar and bio-pellet heating systems could be made to resonate with predominant experiences, habits and ways of thinking among both men and women.

Variation of System Performance with Design and Climate for Combisystems in Sweden

In Sweden, 90% of the solar heating systems are solar domestic hot water and heating systems (SDHW&H), so called combisystems. These generally supply most of the domestic hot water needs during the summer and have enough capacity to supply some energy to the heating system during spring and autumn. This paper describes a standard Swedish combisystem and how the output from it varies with heating load, climate within Sweden, and how it can be increased with improved system design. A base case is defined using the standard combi- system, a modern Swedish single family house and the climate of Stockholm. Using the simulation program Trnsys, parametric studies have been performed on the base case and improved system designs. The solar fraction could be increased from 17.1% for the base case to 22.6% for the best system design, given the same system size, collector type and load. A short analysis of the costs of changed system design is given, showing that payback times for additional investment are from 5-8 years. Measurements on system components in the laboratory have been used to verify the simulation models used. More work is being carried out in order to find even better system designs, and further improvements in system performance are expected.

What do they expect? : A case study on the work expectations of the working German Generation Y

Purpose – The purpose of this paper is to identify the expectations of the workingGerman Generation Y regarding its current work and employer. As a result, the mainelements which could be considered by companies to retain the Generation Y inGermany will be pointed out and discussed.Design/methodology/approach – Semi-structured interviews were used in order toexplore the work expectations of this young generation within a German company. Anon-probability and purposive sample was used and six respondents part of theGeneration Y and working in the same company were interviewed. Furthermore, aseventh interview was conducted with the HMR of the company.Findings – Several findings are consistent with previous results of Gen Y from othernationalities than Germany such as the importance of varied tasks, opportunities forself-development, responsibilities and a pleasant working atmosphere. However,differences were found in particular regarding the importance of the work-life balanceand new expectations such as trust, autonomy and internationality have been broughtto light. Furthermore, several findings are also consistent with other studies aboutemployee retention, commitment and job satisfaction.Originality/value – This research extended previous studies of the expectations of theGeneration Y by providing firstly findings for Germany, a country where such studieshave not been conducted yet and secondly by focusing on the Generation Y who isalready working and therefore not studying anymore.

Primitive art as it relates to contemporary design

For the most part, my project has been of an individually rewarding nature due to an extensive amount of reading and studio work. My paper functions as the major means of communication of my own experiences and findings. It is an attempt to share with others the ideas which I have found particularly stimulating and worthwhile during the course of the year. In other words, the written portion does not intend to summarize all of the phases of primitive art which I have studied during the past year; rather, it is indicative of the type of pursuit with which I became involved. It is neither a historical survey nor a specific and thorough study of one area of primitive art. Instead, my paper is a series of essays focusing upon primitive art in general, and upon some of the aspects of primitive art with which I became concerned in particular.

Using Multi-Objective Optimization To Maximize Multiple Benefits For Sustainable Drainage Design

For many years, drainage design was mainly about providing sufficient network capacity. This traditional approach had been successful with the aid of computer software and technical guidance. However, the drainage design criteria had been evolving due to rapid population growth, urbanisation, climate change and increasing sustainability awareness. Sustainable drainage systems that bring benefits in addition to water management have been recommended as better alternatives to conventional pipes and storages. Although the concepts and good practice guidance had already been communicated to decision makers and public for years, network capacity still remains a key design focus in many circumstances while the additional benefits are generally considered secondary only. Yet, the picture is changing. The industry begins to realise that delivering multiple benefits should be given the top priority while the drainage service can be considered a secondary benefit instead. The shift in focus means the industry has to adapt to new design challenges. New guidance and computer software are needed to assist decision makers. For this purpose, we developed a new decision support system. The system consists of two main components – a multi-criteria evaluation framework for drainage systems and a multi-objective optimisation tool. Users can systematically quantify the performance, life-cycle costs and benefits of different drainage systems using the evaluation framework. The optimisation tool can assist users to determine combinations of design parameters such as the sizes, order and type of drainage components that maximise multiple benefits. In this paper, we will focus on the optimisation component of the decision support framework. The optimisation problem formation, parameters and general configuration will be discussed. We will also look at the sensitivity of individual variables and the benchmark results obtained using common multi-objective optimisation algorithms. The work described here is the output of an EngD project funded by EPSRC and XP Solutions.