The effect of density and thermal diffusivity of wood on the rate of burning cribs /

"October, 1961."

Gray's lessons in botany and vegetable physiology, illustrated by over 360 wood engravings, from original drawings,

Issued as an introduction to the Manual, the two works in one volume, lettered: Gray's new lessons & manual of botany.

Proceedings of the convention of the Wood, Wire and Metal Lathers' International Union.

Mode of access: Internet.

The National Committee on Wood Utilization: Its Accomplishments and Aims

Mode of access: Internet.

Brown's stranger's handbook and illustrated guide to Salisbury Cathedral : being a full historical and descriptive account of the building and monuments with eighteen engravings on wood.

Cover title: The illustrated guide to Salisbury Cathedral.

Botany for young people and common schools. How plants grow, a simple introduction to structural botany. With a popular flora, or an arrangement and description of common plants, both wild and cultivated. Illus. by 500 wood engravings.

"Fifth edition."

Botany for young people and common schools. How plants grow, a simple introduction to structural botany. With a popular flora, or an arrangement and description of common plants, both wild and cultivated. Illustrated by 500 wood engravings.

Mode of access: Internet.

Brown's stranger's handbook and illustrated guide to Salisbury cathedral : being a full historical and descriptive account of the building and monuments with eighteen engravings on wood.

Mode of access: Internet.

An investigation of contaminant distribution in subsurface marine wood waste at Mill-A South Terminal, Port of Everett, Washington

This project investigates the correlation between contaminants and the wood waste present in marine sediments off the shore of the Port of Everett in the former Weyerhaeuser Mill-A pulp mill site. The investigation includes the results of two field studies, which tested contaminant levels in 22 boreholes as well as several surface samples. The contaminants include heavy metals and wood waste byproducts. These results, along with 14 other bore logs, provide the framework for a three-dimensional site model, interpolating the full extent of the depositional units and organic and inorganic chemicals found at Mill-A. The sediments of interest are divided into five depositional units defined by the percent wood content and type of wood: native material (<5% wood), intermediate (<30% wood), sawdust (<30% wood), woodchips (<30% wood), and poorly sorted sands with silt (SM-SP) (0% wood). The contaminants include arsenic, 2,4-dimethylphenol, and total organic carbon. Three-dimensional modeling software, RockWorks, interpolated the discrete borehole data of sediment and contaminants assuming horizontal continuity between sampling locations. The sediment distribution was calculated within concentration ranges for each contaminant of concern. The lowest detection limits, the screening levels, and the cleanup levels defined these ranges. Total organic carbon served as a proxy to estimate the quantity of wood waste in the sediment. As a known byproduct of wood decomposition, 2,4-dimethylphenol was expected to be more prevalent in the depositional units with more wood waste. Finally, arsenic was a proxy for other contaminants to determine if contaminants at Mill-A are dominant in sediments with high percentages of wood waste. The volumetric distribution established that high levels of total organic carbon are present in the sediment with higher percentages of wood waste. This correlation was stronger in the decomposing sawdust-rich sediment than the woodchip-rich sediment. The 2,4-dimethylphenol concentrations above cleanup standards were dominant in the sawdust-rich, intermediate and native sediments. Concentrations of 2,4-dimethylphenol below cleanup levels characterized the native sediment. The distribution of arsenic showed no statistically significant correlation to wood content in sediment. These results do not support the hypothesis of contaminant-rich wood waste, as many of the high concentrations of contaminants were not in the wood-rich sediments. This suggests that the contaminants are more distributed among all depositional units at Mill-A rather than focused within sediments with a high percent of wood waste. Understanding the distribution of potentially toxic compounds with wood waste is important for restoring the Puget Sound waterways to a more habitable environment. Future studies should include new data to validate these results and to limit the uncertainty of the extent of contaminants. Future studies may also find motive in looking for a correlation between contaminants and grain size based on previous studies linking these characteristics. These investigations will benefit the current cleanup effort as well as future cleanup efforts at similarly contaminated waterways.

Stem and Branch Diameter Response in Pruned Douglas-fir Plantations (Pseudotsuga menziesii var. menziesii): Implications for Volume and Clear Wood Production in the U.S. Pacific Northwest

Thesis (Master's)--University of Washington, 2016-06

Locally produced wood biochar increases nutrient retention in agricultural soils of the San Juan Islands, WA, USA

Thesis (Master's)--University of Washington, 2016-06

Field trial of a new aeration system for enhancing biodegradation in a biopile

The influence of a new aeration system on the biopile performance was investigated. The purpose was to increase biodegradation efficiency by optimising airflow through the pile. During a 1-month field trial, the performance of a new system using two perforated vertical pipes with wind-driven turbines was compared with that of a standard pile configuration with two horizontal perforated pipes. Both piles were composed of a similar mix of diesel-contaminated soils, woodchips, compost and NPK fertiliser. Hydrocarbons were recovered using solvent extraction, and determined both gravimetrically and by gas chromatography. Total heterotrophs, pH and moisture content were also assessed. Air pressure measurements were made to compare the efficiency of suction in the pipes. Results at the end of the experiment showed that there was no significant difference between the two piles in the total amount of hydrocarbon biodegradation. The normalised degradation rate was, however, considerably higher in the new system than in the standard one, suggesting that the vertical venting method may have improved the efficiency of the biological reactions in the pile. The pressure measurements showed a significant improvement in the suction produced by the new aeration system. However, many factors other than the airflow (oxygen supply) may influence and limit the biodegradation rates, including moisture content, age of contaminants and the climatic conditions. Additional experiments and modelling need to be carried out to explore further the new aeration method and to develop criteria and guidelines for engineering design of optimal aeration schemes in order to achieve maximum biodegradation in biopiles. (C) 2003 Elsevier Ltd. All rights reserved.

Biogeographic analysis of jurassic-early cretaceous wood assemblages from Gondwana

The terrestrial biogeography of Gondwana during Jurassic-Early Cretaceous times is poorly resolved, and the flora is usually considered to have been rather uniform. This is surprising given the size of Gondwana, which extended from the equator to the South Pole. Documenting Gondwanan terrestrial floristic provincialism in the Jurassic-Early Cretaceous times is important because it provides a historical biogeographic context in which to understand the tremendous evolutionary radiations that occurred during the mid-Cretaceous. In this paper, the distribution of Jurassic-Early Cretaceous fossil wood is analysed at generic level across the entire supercontinent. Specifically, wood assemblages are analyzed in terms of five climatic zones (summer wet, desert, winter wet, warm temperate, cool temperate) established on the basis of independent data. Results demonstrate that araucarian-like conifer wood was a dominant, cosmopolitan element, whereas other taxa showed a greater degree of provincialism. Indeed, several narrowly endemic morphogenera are recognizable from the data. Finally, comparisons with Laurasian wood assemblages indicate strong parallelism between the vegetation of both hemispheres. (C) 2004 Elsevier B.V. All rights reserved.

Depolymerisation and biodegradation of a synthetic tanning agent by activated sludges, the bacteria Arthrobacter globiformis and Comamonas testosteroni, and the fungus Cunninghamella polymorpha

Degradation of a synthetic tanning agent CNSF (a condensation product of 2-naphthatenesulfonic acid (2-NSA) and formaldehyde) by four activated sludges, two previously characterised bacterial strains, Arthrobacter sp. 2AC and Comamonas sp. 4BC, and the fungus Cunninghamella polymorpha, was studied in batch culture at 25 degrees C by determining the changes in the concentrations of CNSF and its component monomers and oligomers (n2-n11). The loss of individual oligomers was correlated with the length of the NSA-CH2 chain. Approximately 25% of the total CNSF was degraded (i.e. mineralised) by the microbes contained in the four activated sludges and by the two bacterial isolates but with different lag phases and at different overall rates. The decline in CNSF concentration was due almost entirely to the biodegradation of the monomers (34.3% of CNSF) and, in particular, 2-NSA (27% of CNSF). There was no change in the n2-n 11 components. The growth of C. polymorpha, on the other hand, arose from extracellular depolymerisation of CNSF oligomers and the biodegradation of the lower molecular mass products. Between 38% and 42% of total CNSF was degraded by C. polymorpha at 25 degrees C. The order of oligomer degradation was inversely related to degree of polymerisation. Eighty percent and 90% of the n4 and n5 and 100% oligomers n6-n11 were degraded after 120 h. At a higher temperature (37 degrees C) oligomers n4-n11 were degraded completely after 120 h. A combination of biodegradation (75%) and sorption to fungal biomass (25%) accounted for the measured loss of all oligomers from the solution phase. The CNSF degradation rates and the volume of fungal biomass produced (and therefore the extent of biosorption) were dependent on the presence of a second carbon source (both optimum at glucose 5 g/l). This is the first report that identifies and distinguishes between depolymerisation, sorption and biodegradation processes in the removal of CNSF and its component oligomers. The use of combinations of the depolymerising fungus C. polymorpha, and the monomer-degrading bacteria, Arthrobacter sp. 2AC and Comamonas sp. 4BC, have potential for wastewater treatment.