Structural changes and dynamic behaviour of vanadium oxide-based catalysts for gas-phase selective oxidations

Selective oxidation is one of the simplest functionalization methods and essentially all monomers used in manufacturing artificial fibers and plastics are obtained by catalytic oxidation processes. Formally, oxidation is considered as an increase in the oxidation number of the carbon atoms, then reactions such as dehydrogenation, ammoxidation, cyclization or chlorination are all oxidation reactions. In this field, most of processes for the synthesis of important chemicals used vanadium oxide-based catalysts. These catalytic systems are used either in the form of multicomponent mixed oxides and oxysalts, e.g., in the oxidation of n-butane (V/P/O) and of benzene (supported V/Mo/O) to maleic anhydride, or in the form of supported metal oxide, e.g., in the manufacture of phthalic anhydride by o-xylene oxidation, of sulphuric acid by oxidation of SO2, in the reduction of NOx with ammonia and in the ammoxidation of alkyl aromatics. In addition, supported vanadia catalysts have also been investigated for the oxidative dehydrogenation of alkanes to olefins , oxidation of pentane to maleic anhydride and the selective oxidation of methanol to formaldehyde or methyl formate [1]. During my PhD I focused my work on two gas phase selective oxidation reactions. The work was done at the Department of Industrial Chemistry and Materials (University of Bologna) in collaboration with Polynt SpA. Polynt is a leader company in the development, production and marketing of catalysts for gas-phase oxidation. In particular, I studied the catalytic system for n-butane oxidation to maleic anhydride (fluid bed technology) and for o-xylene oxidation to phthalic anhydride. Both reactions are catalyzed by systems based on vanadium, but catalysts are completely different. Part A is dedicated to the study of V/P/O catalyst for n-butane selective oxidation, while in the Part B the results of an investigation on TiO2-supported V2O5, catalyst for o-xylene oxidation are showed. In Part A, a general introduction about the importance of maleic anhydride, its uses, the industrial processes and the catalytic system are reported. The reaction is the only industrial direct oxidation of paraffins to a chemical intermediate. It is produced by n-butane oxidation either using fixed bed and fluid bed technology; in both cases the catalyst is the vanadyl pyrophosphate (VPP). Notwithstanding the good performances, the yield value didn’t exceed 60% and the system is continuously studied to improve activity and selectivity. The main open problem is the understanding of the real active phase working under reaction conditions. Several articles deal with the role of different crystalline and/or amorphous vanadium/phosphorous (VPO) compounds. In all cases, bulk VPP is assumed to constitute the core of the active phase, while two different hypotheses have been formulated concerning the catalytic surface. In one case the development of surface amorphous layers that play a direct role in the reaction is described, in the second case specific planes of crystalline VPP are assumed to contribute to the reaction pattern, and the redox process occurs reversibly between VPP and VOPO4. Both hypotheses are supported also by in-situ characterization techniques, but the experiments were performed with different catalysts and probably under slightly different working conditions. Due to complexity of the system, these differences could be the cause of the contradictions present in literature. Supposing that a key role could be played by P/V ratio, I prepared, characterized and tested two samples with different P/V ratio. Transformation occurring on catalytic surfaces under different conditions of temperature and gas-phase composition were studied by means of in-situ Raman spectroscopy, trying to investigate the changes that VPP undergoes during reaction. The goal is to understand which kind of compound constituting the catalyst surface is the most active and selective for butane oxidation reaction, and also which features the catalyst should possess to ensure the development of this surface (e.g. catalyst composition). On the basis of results from this study, it could be possible to project a new catalyst more active and selective with respect to the present ones. In fact, the second topic investigated is the possibility to reproduce the surface active layer of VPP onto a support. In general, supportation is a way to improve mechanical features of the catalysts and to overcome problems such as possible development of local hot spot temperatures, which could cause a decrease of selectivity at high conversion, and high costs of catalyst. In literature it is possible to find different works dealing with the development of supported catalysts, but in general intrinsic characteristics of VPP are worsened due to the chemical interaction between active phase and support. Moreover all these works deal with the supportation of VPP; on the contrary, my work is an attempt to build-up a V/P/O active layer on the surface of a zirconia support by thermal treatment of a precursor obtained by impregnation of a V5+ salt and of H3PO4. In-situ Raman analysis during the thermal treatment, as well as reactivity tests are used to investigate the parameters that may influence the generation of the active phase. Part B is devoted to the study of o-xylene oxidation of phthalic anhydride; industrially, the reaction is carried out in gas-phase using as catalysts a supported system formed by V2O5 on TiO2. The V/Ti/O system is quite complex; different vanadium species could be present on the titania surface, as a function of the vanadium content and of the titania surface area: (i) V species which is chemically bound to the support via oxo bridges (isolated V in octahedral or tetrahedral coordination, depending on the hydration degree), (ii) a polymeric species spread over titania, and (iii) bulk vanadium oxide, either amorphous or crystalline. The different species could have different catalytic properties therefore changing the relative amount of V species can be a way to optimize the catalytic performances of the system. For this reason, samples containing increasing amount of vanadium were prepared and tested in the oxidation of o-xylene, with the aim of find a correlations between V/Ti/O catalytic activity and the amount of the different vanadium species. The second part deals with the role of a gas-phase promoter. Catalytic surface can change under working conditions; the high temperatures and a different gas-phase composition could have an effect also on the formation of different V species. Furthermore, in the industrial practice, the vanadium oxide-based catalysts need the addition of gas-phase promoters in the feed stream, that although do not have a direct role in the reaction stoichiometry, when present leads to considerable improvement of catalytic performance. Starting point of my investigation is the possibility that steam, a component always present in oxidation reactions environment, could cause changes in the nature of catalytic surface under reaction conditions. For this reason, the dynamic phenomena occurring at the surface of a 7wt% V2O5 on TiO2 catalyst in the presence of steam is investigated by means of Raman spectroscopy. Moreover a correlation between the amount of the different vanadium species and catalytic performances have been searched. Finally, the role of dopants has been studied. The industrial V/Ti/O system contains several dopants; the nature and the relative amount of promoters may vary depending on catalyst supplier and on the technology employed for the process, either a single-bed or a multi-layer catalytic fixed-bed. Promoters have a quite remarkable effect on both activity and selectivity to phthalic anhydride. Their role is crucial, and the proper control of the relative amount of each component is fundamental for the process performance. Furthermore, it can not be excluded that the same promoter may play different role depending on reaction conditions (T, composition of gas phase..). The reaction network of phthalic anhydride formation is very complex and includes several parallel and consecutive reactions; for this reason a proper understanding of the role of each dopant cannot be separated from the analysis of the reaction scheme. One of the most important promoters at industrial level, which is always present in the catalytic formulations is Cs. It is known that Cs plays an important role on selectivity to phthalic anhydride, but the reasons of this phenomenon are not really clear. Therefore the effect of Cs on the reaction scheme has been investigated at two different temperature with the aim of evidencing in which step of the reaction network this promoter plays its role.

Dynamic identification of structures: experimental assessment of modal parameteres through methods in frequency domain, in time-frequency domain and model updating

Among the experimental methods commonly used to define the behaviour of a full scale system, dynamic tests are the most complete and efficient procedures. A dynamic test is an experimental process, which would define a set of characteristic parameters of the dynamic behaviour of the system, such as natural frequencies of the structure, mode shapes and the corresponding modal damping values associated. An assessment of these modal characteristics can be used both to verify the theoretical assumptions of the project, to monitor the performance of the structural system during its operational use. The thesis is structured in the following chapters: The first introductive chapter recalls some basic notions of dynamics of structure, focusing the discussion on the problem of systems with multiply degrees of freedom (MDOF), which can represent a generic real system under study, when it is excited with harmonic force or in free vibration. The second chapter is entirely centred on to the problem of dynamic identification process of a structure, if it is subjected to an experimental test in forced vibrations. It first describes the construction of FRF through classical FFT of the recorded signal. A different method, also in the frequency domain, is subsequently introduced; it allows accurately to compute the FRF using the geometric characteristics of the ellipse that represents the direct input-output comparison. The two methods are compared and then the attention is focused on some advantages of the proposed methodology. The third chapter focuses on the study of real structures when they are subjected to experimental test, where the force is not known, like in an ambient or impact test. In this analysis we decided to use the CWT, which allows a simultaneous investigation in the time and frequency domain of a generic signal x(t). The CWT is first introduced to process free oscillations, with excellent results both in terms of frequencies, dampings and vibration modes. The application in the case of ambient vibrations defines accurate modal parameters of the system, although on the damping some important observations should be made. The fourth chapter is still on the problem of post processing data acquired after a vibration test, but this time through the application of discrete wavelet transform (DWT). In the first part the results obtained by the DWT are compared with those obtained by the application of CWT. Particular attention is given to the use of DWT as a tool for filtering the recorded signal, in fact in case of ambient vibrations the signals are often affected by the presence of a significant level of noise. The fifth chapter focuses on another important aspect of the identification process: the model updating. In this chapter, starting from the modal parameters obtained from some environmental vibration tests, performed by the University of Porto in 2008 and the University of Sheffild on the Humber Bridge in England, a FE model of the bridge is defined, in order to define what type of model is able to capture more accurately the real dynamic behaviour of the bridge. The sixth chapter outlines the necessary conclusions of the presented research. They concern the application of a method in the frequency domain in order to evaluate the modal parameters of a structure and its advantages, the advantages in applying a procedure based on the use of wavelet transforms in the process of identification in tests with unknown input and finally the problem of 3D modeling of systems with many degrees of freedom and with different types of uncertainty.

Genetic and morphological variation and differentiation of Raja clavata populations in the European seas: marker development and preliminary data

In this study the population structure and connectivity of the Mediterranean and Atlantic Raja clavata (L., 1758) were investigated by analyzing the genetic variation of six population samples (N = 144) at seven nuclear microsatellite loci. The genetic dataset was generated by selecting population samples available in the tissue databases of the GenoDREAM laboratory (University of Bologna) and of the Department of Life Sciences and Environment (University of Cagliari), all collected during past scientific surveys (MEDITS, GRUND) from different geographical locations in the Mediterranean basin and North-east Atlantic sea, as North Sea, Sardinian coasts, Tuscany coasts and Cyprus Island. This thesis deals with to estimate the genetic diversity and differentiation among 6 geographical samples, in particular, to assess the presence of any barrier (geographic, hydrogeological or biological) to gene flow evaluating both the genetic diversity (nucleotide diversity, observed and expected heterozygosity, Hardy- Weinberg equilibrium analysis) and population differentiation (Fst estimates, population structure analysis). In addition to molecular analysis, quantitative representation and statistical analysis of morphological individuals shape are performed using geometric morphometrics methods and statistical tests. Geometric coordinates call landmarks are fixed in 158 individuals belonging to two population samples of Raja clavata and in population samples of closely related species, Raja straeleni (cryptic sibling) and Raja asterias, to assess significant morphological differences at multiple taxonomic levels. The results obtained from the analysis of the microsatellite dataset suggested a geographic and genetic separation between populations from Central-Western and Eastern Mediterranean basins. Furthermore, the analysis also showed that there was no separation between geographic samples from North Atlantic Ocean and central-Western Mediterranean, grouping them to a panmictic population. The Landmark-based geometric morphometry method results showed significant differences of body shape able to discriminate taxa at tested levels (from species to populations).

Microfluidic microbial fuel cell fabrication and rapid screening of electrochemically microbes

The demand for novel renewable energy sources, together with the new findings on bacterial electron transport mechanisms and the progress in microbial fuel cell design, have raised a noticeable interest in microbial power generation. Microbial fuel cell (MFC) is an electrochemical device that converts organic substrates into electricity via catalytic conversion by microorganism. It has represented a continuously growing research field during the past few years. The great advantage of this device is the direct conversion of the substrate into electricity and in the future, MFC may be linked to municipal waste streams or sources of agricultural and animal waste, providing a sustainable system for waste treatment and energy production. However, these novel green technologies have not yet been used for practical applications due to their low power outputs and challenges associated with scale-up, so in-depth studies are highly necessary to significantly improve and optimize the device working conditions. For the time being, the micro-scale MFCs show great potential in the rapid screening of electrochemically active microbes. This thesis presents how it will be possible to optimize the properties and design of the micro-size microbial fuel cell for maximum efficiency by understanding the MFC system. So it will involve designing, building and testing a miniature microbial fuel cell using a new species of microorganisms that promises high efficiency and long lifetime. The new device offer unique advantages of fast start-up, high sensitivity and superior microfluidic control over the measured microenvironment, which makes them good candidates for rapid screening of electrode materials, bacterial strains and growth media. It will be made in the Centre of Hybrid Biodevices (Faculty of Physical Sciences and Engineering, University of Southampton) from polymer materials like PDMS. The eventual aim is to develop a system with the optimum combination of microorganism, ion exchange membrane and growth medium. After fabricating the cell, different bacteria and plankton species will be grown in the device and the microbial fuel cell characterized for open circuit voltage and power. It will also use photo-sensitive organisms and characterize the power produced by the device in response to optical illumination.

Application and optimization of a thermal energy storage on a cruise ship

The thesis, developed in collaboration between the team Systems and Equipment for Energy and Environment of Bologna University and Chalmers University of Technology in Goteborg, aims to study the benefits resulting from the adoption of a thermal storage system for marine application. To that purpose a chruis ship has been considered. To reach the purpose has been used the software EGO (Energy Greed Optimization) developed by University of Bologna.

Mountains and Climate Change: A Global Concern

Editor's note: The text of this article originally appeared as the final chapter of a brochure entitled Mountains and Climate Change—From Understanding to Action, prepared at the Centre for Development and Environment, University of Bern, Switzerland, for presentation by the Swiss Agency for Development and Cooperation (SDC) at a side event at the United Nations Climate Change Conference in Copenhagen on 12 December 2009. Chapters of the brochure deal with various aspects of climate change and its impact in mountain regions. In light of the significance of the Copenhagen COP 15 conference, the editors of this publication believe MRD's readers will be interested in reading this summary written from the perspective of Swiss researchers and development experts. The full brochure may be viewed and downloaded at www.cde.unibe.ch/Research/MA_Re.asp

Women's Athletics at Mansfield University in Historical Perspective

Mansfield University, founded on January 7, 1857 as Mansfield Classical Seminary, has an overwhelming history of persistence. Along with the institution, the women’s athletic programs also have a strong past. This paper outlines the history of women’s athletics at Mansfield from the establishment of the school in 1857, to the first women’s athletic program starting in 1900, and through the present day. It is organized according to the eras the institution went through and the athletic opportunities given to the women at that time. The focus of each chapter reflects the major accomplishments of both the institution and the women’s athletic programs, events, and issues that transpired during each time period. Research was conducted by reviewing yearbooks, memorandums, and reports in the Mansfield University archives, school newspaper articles, and the university website, along with several other supplemental materials. Personal interviews also accompanied the documentary research to give a first-hand historical viewpoint of several eras. It was concluded that the women at Mansfield University have fought for, and created athletic opportunities for over 100 years. In comparison to other Pennsylvania state universities, women’s athletics at Mansfield are under-funded and on the low end of receiving athletic scholarship monies. The future of women’s athletics at Mansfield is uncertain due to budgetary factors that are unknown at this time.

Youth and Young Adult Homelessness in Worcester, Massachusetts:

Supporting Worcester’s ongoing effort to understand and address youth and young adult homelessness, the Community Roundtable on Youth Homelessness in conjunction with the Compass Project and Clark University conducted the fourth annual Point-in-Time Survey during October of 2012. Young people were surveyed at city shelters, youth programs, outside of schools, in parks, and on the streets of Worcester. Out of the 753 young people (ages 13to 25) surveyed, 120 (16%) dentified as homeless. We define homeless to include young people in shelters, staying with others temporarily (i.e. couch surfing) or on the streets. In addition to these 120 young people, another 220 youth who were housed reported that they had a friend who was homeless. As in prior years, when compared to their housed counterparts in the study, homeless youth: Have experienced more residential instability and family conflict; Have more precarious income situations; Are more likely to have children; Are more likely to have had involvement with the foster care and/or juvenile justice systems; and Have faced more barriers accessing services.

The Swiss Childhood Cancer Registry: rationale, organisation and results for the years 2001-2005

QUESTIONS UNDER STUDY: Childhood cancer is a rare but severe disease. Therefore central registration of all cases is essential for surveillance and management. This paper describes the methodology and basic results of the Swiss Childhood Cancer Registry (SCCR). METHODS: The SCCR was established in 1976, originally as a national hospital-based registry of childhood malignancies. All 9 paediatric oncology-haematology clinics in Switzerland provide baseline and follow-up information on all children diagnosed with cancer. These data are registered centrally and diagnoses are coded according to the International Classification of Childhood Cancer. RESULTS: From 2001-2005, 887 cases of childhood cancer in Swiss residents under the age of 15 years were registered in the SCCR. Of these, 281 (31.7%) were leukaemias, 223 (24.0%) were CNS tumours, and 116 (13.1%) were lymphomas. The age-standardised annual incidence per 1 Million person-years (age below 15 years; world standardisation) was 154.0 (95% CI 143.7-164.3; N = 887). The incidence was higher for boys (170.2, 155.0-185.4; N = 501) than for girls (136.9, 123.0-150.8; N = 386). CONCLUSION: The close collaboration between all paediatric oncologists-haematologists in Switzerland and a university department allowed the creation of a national population-based cancer registry with detailed clinical information. The SCCR produces cancer type specific incidence and survival estimates and allows the development of nested research projects on childhood cancer aetiology, management and outcome, both on a national and on an international level.

A retrospective analysis of patients referred for implant placement to a specialty clinic: indications, surgical procedures, and early failures

Purpose: This retrospective study analyzed the pool of patients referred for treatment with dental implants over a 3-year period in a referral specialty clinic. Materials and Methods: All patients receiving dental implants between 2002 and 2004 in the Department of Oral Surgery and Stomatology, University of Bern, were included in this retrospective study. Patients were analyzed according to age, gender, indications for implant therapy, location of implants, and type and length of implants placed. A cumulative logistic regression analysis was performed to identify and analyze potential risk factors for complications or failures. Results: A total of 1,206 patients received 1,817 dental implants. The group comprised 573 men and 633 women with a mean age of 55.2 years. Almost 60% of patients were age 50 or older. The most frequent indication for implant therapy was single-tooth replacement in the maxilla (522 implants or 28.7%). A total of 726 implants (40%) were inserted in the esthetically demanding region of the anterior maxilla. For 939 implants (51.7%), additional bone-augmentation procedures were required. Of these, ridge augmentation with guided bone regeneration was performed more frequently than sinus grafting. Thirteen complications leading to early failures were recorded, resulting in an early failure rate of 0.7%. The regression analysis failed to identify statistically significant failure etiologies for the variables assessed. Conclusions: From this study it can be concluded that patients referred to a specialty clinic for implant placement were more likely to be partially edentulous and over 50 years old. Single-tooth replacement was the most frequent indication (> 50%). Similarly, additional bone augmentation was indicated in more than 50% of cases. Adhering to strict patient selection criteria and a standardized surgical protocol, an early failure rate of 0.7% was experienced in this study population

Development and simultaneous application of multiple care protocols in critical care: a multicenter feasibility study

OBJECTIVE: To test the feasibility of and interactions among three software-driven critical care protocols. DESIGN: Prospective cohort study. SETTING: Intensive care units in six European and American university hospitals. PATIENTS: 174 cardiac surgery and 41 septic patients. INTERVENTIONS: Application of software-driven protocols for cardiovascular management, sedation, and weaning during the first 7 days of intensive care. MEASUREMENTS AND RESULTS: All protocols were used simultaneously in 85% of the cardiac surgery and 44% of the septic patients, and any one of the protocols was used for 73 and 44% of study duration, respectively. Protocol use was discontinued in 12% of patients by the treating clinician and in 6% for technical/administrative reasons. The number of protocol steps per unit of time was similar in the two diagnostic groups (n.s. for all protocols). Initial hemodynamic stability (a protocol target) was achieved in 26+/-18 min (mean+/-SD) in cardiac surgery and in 24+/-18 min in septic patients. Sedation targets were reached in 2.4+/-0.2h in cardiac surgery and in 3.6 +/-0.2h in septic patients. Weaning protocol was started in 164 (94%; 154 extubated) cardiac surgery and in 25 (60%; 9 extubated) septic patients. The median (interquartile range) time from starting weaning to extubation (a protocol target) was 89 min (range 44-154 min) for the cardiac surgery patients and 96 min (range 56-205 min) for the septic patients. CONCLUSIONS: Multiple software-driven treatment protocols can be simultaneously applied with high acceptance and rapid achievement of primary treatment goals. Time to reach these primary goals may provide a performance indicator.

Technology, Transportation, and Scale in the Koyokuk Placer Mining District 1890s - 1930s

The Koyukuk Mining District was one of several northern, turn of the century, gold rush regions. Miners focused their efforts in this region on the Middle Fork of the Koyukuk River and on several of its tributaries. Mining in the Koyukuk began in the 1880s and the first rush occurred in 1898. Continued mining throughout the early decades of the 1900s has resulted in an historic mining landscape consisting of structures, equipment, mining shafts, waste rock, trash scatters, and prospect pits. Modern work continues in the region alongside these historic resources. An archaeological survey was completed in 2012 as part of an Abandoned Mine Lands survey undergone with the Bureau of Land Management, Michigan Technological University, and the University of Alaska Anchorage. This thesis examines the discrepancy between the size of mining operations and their respective successes in the region while also providing an historical background on the region and reports on the historical resources present.

Executive Reorganization: Building a State Government That Worked for People -- Tom Harrison, Diana Dowling & Sheena Wilson “In the Crucible of Change”

One of the primary accomplishments of Governor Forrest Anderson in 1969-71 was the reorganization of the Executive Branch of Montana government, something that had been attempted six different times between 1919 and 1962 as state government had grown from twenty agencies to almost 200 uncontrolled boards, bureaus and commissions. The chaotic structure of the executive branch disempowered governors of both parties and empowered the private corporations and organizations that were the power structure of Montana. With remarkable political acumen, Governor Anderson figured out how to get that near impossible job done. Central to his efforts was the creation of an Executive Reorganization Commission, including eight legislators and the Governor, the adoption of a Constitutional Amendment that limited the executive branch to no more than twenty departments under the Governor, and the timely completion of a massive research effort to delineate the actual structure of the twenty departments. That story is told in this episode by three major players in the effort, all involved directly with the Executive Reorganization Commission: Tom Harrison, Diana Dowling and Sheena Wilson. Their recollections reflect an insider’s perspective of this significant accomplishment that helped change Montana “In the Crucible of Change.” Tom Harrison is a former Republican State Representative and State Senator from Helena, who was a member of the Executive Reorganization Commission. As Majority Leader in the Montana House of Representatives in 1971, he was the primary sponsor of the House’s executive reorganization bill and helped shepherd the Senate’s version to passage. Harrison was the Republican candidate for Attorney General in 1976 after which he practiced private law for 3 more decades. He served in the Montana Army National Guard for almost 34 years, rising to the rank of Colonel in the position of Judge Advocate General. He was a founding Director of Federal Defenders of Montana (legal representation for indigents accused within the Federal Judicial System); appointed Chairman of the original Montana State Fund (workers' compensation insurance) by Gov. Stephens; served as President of the Montana Trial Lawyers Association, Helena Kiwanis Club and St. Peter's Community Hospital Foundation, as well as Chairman and Director of AAA MountainWest; and was a founder, first Chairman and Director of the Valley Bank of Helena for over 25 years. Diana Dowling was an attorney for the Executive Reorganization Commission and helped draft the legislation that was passed. She also worked for Governor Forrest Anderson and for the 1972 Constitutional Convention where she prepared and directed publication of official explanation of the new Constitution that was mailed to all Montana voters. Diana was Executive Director of the Montana Bar Association and for 20 years held various legal positions with the Montana Legislative Council. For 12 years she was a commissioner on the National Conference of Commissioners on Uniform State Laws and for 7 years was a member of Montana State Board of Bar Examiners. Diana was the first director of the Montana Lottery, an adjunct professor at both Carroll College and the UM Law School, and an administrative officer for Falcon Press Publishing Co. Diana is currently - and intends to continue being - a perpetual college student. Sheena Wilson came fresh out of the University of Montana to become a Research Assistant for the Executive Reorganization Commission. Later she worked for seven years as a field representative in Idaho and Montana for the Mountain Plains Family Education Program, for thirteen years with Congressman Pat Williams as Executive Assistant in Washington and Field Assistant here in Montana, owned and managed a Helena restaurant for seven years, worked as Executive Assistant for State Auditor John Morrison and was Deputy Chief of Staff for Governor Brian Schweitzer his full 8 years in the Governorship. Though currently “retired”, Sheena serves on the Montana Board of Investments, the Public Employees Retirement Board and the Capitol Complex Advisory Council and is a partner in a dry-land wheat farm in Teton County that was homesteaded by her great uncle.