Surface diffusion of strongly adsorbing vapors in activated carbon by a differential permeation method

Conventional methods to determine surface diffusion of adsorbed molecules are proven to be inadequate for strongly adsorbing vapors on activated carbon. Knudsen diffusion permeability (B-k) for strongly adsorbing vapors cannot be directly estimated from that of inert gases such as helium. In this paper three models are considered to elucidate the mechanism of surface diffusion in activated carbon. The transport mechanism in all three models is a combination of Knudsen diffusion, viscous flow and surface diffusion. The collision reflection factor f (which is the fraction of molecules undergoing collision to the solid surface over reflection from the surface) of the Knudsen diffusivity is assumed to be a function of loading. It was found to be 1.79 in the limit of zero loading, and decreases as loading increases. The surface diffusion permeability increases sharply at very low pressures and then starts to decrease after it has reached a maximum (B(mum)s) at a threshold pressure. The initial rapid increase in the total permeability is mainly attributed to surface diffusion. Interestingly the B(mum)s for all adsorbates appear at the same volumetric adsorbed phase concentration, suggesting that the volume of adsorbed molecules may play an important role in the surface diffusion mechanism in activated carbon. (C) 2003 Elsevier Ltd. All rights reserved.

Influence of shapes of selected vegetable materials on drying kinetics during fluidized bed drying

Three different particular geometrical shapes of parallelepiped, cylinder and sphere were taken from cut green beans (length:diameter = 1:1, 2:1 and 3:1) and potatoes (aspect ratio = 1:1, 2:1 and 3:1) and peas, respectively. Their drying behaviour in a fluidised bed was studied at three different drying temperatures of 30, 40 and 50 degreesC (RH = 15%). Drying curves were constructed using non-dimensional moisture ratio (MR) and time and their behaviour was modelled using exponential (MR = exp(-kt)) and Page (MR = exp(-kt(n))) models. The effective diffusion coefficient of moisture transfer was determined by Fickian method using uni- and three-dimensional moisture movements. The diffusion coefficient was least affected by the size when the moisture movement was considered three-dimensional, whereas the drying temperature had a significative effect on diffusivity as expected. The drying constant and diffusivity coefficients were on the descending order for potato, beans and peas. The Arrhenius activation energy for the peas was also highest, indicating a strong barrier to moisture movement in peas as compared to beans and skinless cut potato pieces. (C) 2003 Elsevier Science Ltd. All rights reserved.

A new wavelet-based adaptive method for solving population balance equations

A new wavelet-based adaptive framework for solving population balance equations (PBEs) is proposed in this work. The technique is general, powerful and efficient without the need for prior assumptions about the characteristics of the processes. Because there are steeply varying number densities across a size range, a new strategy is developed to select the optimal order of resolution and the collocation points based on an interpolating wavelet transform (IWT). The proposed technique has been tested for size-independent agglomeration, agglomeration with a linear summation kernel and agglomeration with a nonlinear kernel. In all cases, the predicted and analytical particle size distributions (PSDs) are in excellent agreement. Further work on the solution of the general population balance equations with nucleation, growth and agglomeration and the solution of steady-state population balance equations will be presented in this framework. (C) 2002 Elsevier Science B.V. All rights reserved.

Method for determining the shear stress in cylindrical systems

We develop a method for determining the elements of the pressure tensor at a radius r in a cylindrically symmetric system, analogous to the so-called method of planes used in planar systems [B. D. Todd, Denis J. Evans, and Peter J. Daivis, Phys. Rev. E 52, 1627 (1995)]. We demonstrate its application in determining the radial shear stress dependence during molecular dynamics simulations of the forced flow of methane in cylindrical silica mesopores. Such expressions are useful for the examination of constitutive relations in the context of transport in confined systems.

Recombinant expression of Munc18c in a baculovirus system and interaction with syntaxin4

Two protein families that are critical for vesicle transport are the Syntaxin and Munc18/Sec1. families of proteins. These two molecules form a high affinity complex and play an essential role in vesicle docking and fusion. Munc18c was expressed as an N-terminally His-tagged fusion protein from recombinant baculovirus in Sf9 insect cells. His-tagged Munc18c was purified to homogeneity using both cobalt-chelating affinity chromatography and gel filtration chromatography. With this simple two-step protocol, 3.5 mg of purified Munc18c was obtained from a 1 L culture. Further, the N-terminal His-tag could be removed by thrombin cleavage while the tagged protein was bound to metal affinity resin. Recombinant Munc18c produced in this way is functional, in that it forms a stable complex with the SNARE interacting partner, syntaxin4. Thus we have developed a method for producing and purifying large amounts of functional Munc18c-both tagged and detagged-from a baculovirus expression system. We have also developed a method to purify the Munc18c:syntaxin4 complex. These methods will be employed for future functional and structural studies. Crown copyright (C) 2003 Published by Elsevier Inc. All rights reserved.

Influência da idade na resistência natural da madeira de Eucalyptus grandis W. Hill ex. Maiden ao ataque de cupim de madeira seca (Cryptotermes brevis)

Este trabalho objetivou testar a resistência natural da madeira de Eucalyptus grandis de quatro diferentes idades (10, 14, 20 e 25 anos) ao ataque de cupins de madeira seca. As amostras foram retiradas da prancha diametral, na região próxima ao cerne mais externo, em número de seis unidades por tora, de cada uma das 16 árvores (quatro de cada idade). Cada par de amostras foi colocado em contato com 40 indivíduos, da espécie Cryptotermes brevis (cupim de madeira seca), avaliando-se cada par comparativamente com corpos-de-prova de madeira altamente suscetível ao ataque de cupins, no caso a madeira de Pinus elliottii, sob idênticas condições laboratoriais, mediante observações em intervalos periódicos. Ao término do ensaio foram registrados a porcentagem de cupins mortos e o número de furos, além do desgaste produzido por esses insetos. Verificou-se que a madeira de 10 anos foi a mais severamente atacada, com desgaste semelhante ao da testemunha. As madeiras de 14, 20 e 25 anos não diferiram estatisticamente entre si, quanto à resistência natural ao ataque de cupim de madeira seca, todas classificadas como de desgaste acentuado. A madeira de todas as idades mostrou-se altamente suscetível ao ataque de cupins, revelando a baixa resistência natural da espécie.

Adapted Gaussian basis sets for atoms from Li through Xe generated with the generator coordinate Hartree-Fock method

Utiliza-se o método coordenada geradora Hartree-Fock para gerar bases Gaussianas adaptadas para os átomos de Li (Z=3) até Xe (Z=54). Neste método, integram-se as equações de Griffin-Hill-Wheeler-Hartree-Fock através da técnica de discretização integral. Comparam-se as funções de ondas geradas neste trabalho com as funções de ondas Roothaan-Hartree-Fock de Clementi e Roetti (1974) e com outros conjuntos de bases relatados na literatura. Para os átomos estudados aqui, os erros em nossas energias totais relativos aos limites numéricos Hartree-Fock são sempre menores que 7,426 milihartree.

Estudo Químico-Biológico de Pyrostegia venusta (Ker Gawl.) Miers (Bignoniaceae)

Este trabalho descreve a investigação química e biológica do extrato bruto e das partições hexano e acetato de etila, das folhas de Pyrostegia venusta (Ker Gawl.) Miers, popularmente conhecida como “cipó de São João”. P. venusta é classificada botanicamente como uma liana de porte mediano, tendo como característica uma exuberante floração vermelha, e por isso, sendo utilizada como planta ornamental. Essa planta possui uma larga utilização na medicina popular, sendo utilizada no tratamento de vitiligo, diarreia, bronquite, resfriado, icterícia e infecções. Os objetivos deste trabalho foram identificar as classes de metabólitos secundários presentes, avaliar o potencial antioxidante das amostras de P. vesnuta (extrato bruto, frações acetato de etila e hexano), quantificar o teor de flavonoides no extrato bruto, verificar a segurança do uso dessa planta, em termos de viabilidade celular (VC) frente à macrófagos murinos (RAW 264.7) (ensaio de imunotoxicidade). Adicionalmente os resultados de viabilidade celular foram comparados com quatro compostos anti-inflamatórios comerciais (ácido acetilsalicílico, indometacina, betametasona e piroxicam), e testar o extrato bruto quanto à inibição de catepsinas K e V. Os testes de identificação fitoquímica confirmaram a presença de flavonoides, cumarinas e esteroides nas amostras. A metodologia cromatográfica associada à análises por espectrometria de massas, levou a identificação dos compostos: fitol (1), sitosterol (2), estigmasterol (3) e campesterol (4). O extrato bruto demonstrou ter atividade inibitória frente as duas catepsinas testadas (K e V). A fração acetato de etila foi a que apresentou maior atividade antioxidante nas metodologias de inibição do radical DPPH (IC50 38,62 μg/mL) e radical ABTS (IC50 27,58 μg/mL). O teor de flavonoides total para o extrato bruto foi de 148,5±7,65 μg/mg (14,85 % (m/m)), o que justifica a observada atividade antioxidante, já que estes possuem atividade antioxidante. As amostras de P. venusta obtiveram valores de VC maiores do que os anti-inflamatórios comerciais, estes apresentaram VC abaixo do controle negativo, assim como o extrato bruto e a fração acetato de etila, a fração hexano obteve valores acima do controle negativo, sendo estes os maiores resultados de VC entre as amostras de P. venusta.

The role of disorder on the AC and DC electrical conductivity of vapour grown carbon nanofibre/epoxy composites

Four dispersion methods were used for the preparation of vapour grown carbon nanofibre (VGCNF)/epoxy composites. It is shown that each method induces certain levels of VGCNF dispersion and distribution within the matrix, and that these have a strong influence on the composite electrical properties. A homogenous VGCNF dispersion does not necessarily imply higher electrical conductivity. In fact, it is concluded that the presence of well distributed clusters, rather than a fine dispersion, is more important for achieving larger conductivities for a given VGCNF concentration. It is also found that the conductivity can be described by a weak disorder regime.

Carbon Nanofiber Type and Content Dependence of the Physical Properties of Carbon Nanofiber Reinforced Polypropylene Composites

The variation of the physical properties of four differ- ent carbon nanofibers (CNFs), based-polymer nano- composites incorporated in the same polypropylene (PP) matrix by twin-screw extrusion process was investigated. Nanocomposites fabricated with CNFs with highly graphitic outer layer revealed electrical isolation-to-conducting behaviors as function of CNF’s content. Nanocomposites fabricated with CNFs with an outer layer consisting on a disordered pyro- litically stripped layer, in contrast, revealed better mechanical performance and enhanced thermal sta- bility. Further, CNF’s incorporation into the polymer increased the thermal stability and the degree of crystallinity of the polymer, independently on the filler content and type. In addition, dispersion of the CNFs’ clusters in PP was analyzed by transmitted light opti- cal microscopy, and grayscale analysis (GSA). The results showed a correlation between the filler concentration and the variance, a parameter which measures quantitatively the dispersion, for all composites. This method indicated a value of 1.4 vol% above which large clusters of CNFs cannot be dispersed effectively and as a consequence only slight changes in mechanical performance are observed. Finally, this study establishes that for tailoring the physical properties of CNF based-polymer nanocomposites, both adequate CNFs structure and content have to be chosen.

Multiple centroid method to evaluate the adaptability of alfalfa genotypes

This study aimed to evaluate the efficiency of multiple centroids to study the adaptability of alfalfa genotypes (Medicago sativa L.). In this method, the genotypes are compared with ideotypes defined by the bissegmented regression model, according to the researcher's interest. Thus, genotype classification is carried out as determined by the objective of the researcher and the proposed recommendation strategy. Despite the great potential of the method, it needs to be evaluated under the biological context (with real data). In this context, we used data on the evaluation of dry matter production of 92 alfalfa cultivars, with 20 cuttings, from an experiment in randomized blocks with two repetitions carried out from November 2004 to June 2006. The multiple centroid method proved efficient for classifying alfalfa genotypes. Moreover, it showed no unambiguous indications and provided that ideotypes were defined according to the researcher's interest, facilitating data interpretation.