Efeito do fotoperíodo sobre a composição do filé de juvenis de tilápia do Nilo

Com este estudo objetivou-se avaliar o efeito do fotoperíodo sobre a composição centesimal de filés de juvenis de tilápia do Nilo. Utilizou-se um delineamento inteiramente casualizado com cinco tratamentos (0L:24E; 6L:18E; 12L:12E; 18L:6E; 24L:0E) e quatro repetições. Foram utilizados 160 alevinos de tilápia, distribuídos em 20 aquários (20L) em sistema de recirculação, temperatura controlada em 27 ºC e densidade de oito peixes por aquário. Os peixes foram alimentados duas vezes ao dia, com ração comercial extrusada contendo 40% de proteína bruta. Ao final de 75 dias, amostras do filé foram coletadas e armazenadas em freezer (-80 ºC) para posteriores análises da composição bromatológica. Não houve efeito dos diferentes fotoperíodos sobre a umidade e cinzas do filé (P>0,05). Por outro lado, os peixes sob fotoperíodo de 18L:6E apresentaram maior quantidade de proteína e retenção desta no filé, assim como menor quantidade de gordura e retenção de lipídeo (P<0,05). Portanto, pode-se concluir que o fotoperíodo pode alterar a composição corporal de alevinos de tilápia do Nilo, sendo que e o fotoperíodo de 18L:6E contribui para o aumento da concentração de proteína bruta e uma menor deposição de gordura no filé.

DESIGN OF MICROIRRIGATION SYSTEMS IN SLOPING LANDS USING LINEAR PROGRAMMING

Quando a área a ser irrigada apresenta um elevado gradiente de declive na direção das linhas de derivação, uma opção de dimensionamento é o uso de tubulações com vários diâmetros para economizar no custo e também para manter a variação de pressão dentro dos limites desejados. O objetivo deste trabalho foi desenvolver um modelo de programação linear para dimensionar sistemas de irrigação por microaspersão com linhas de derivação com mais de um diâmetro e operando em declive, visando a minimização do custo anualizado da rede hidráulica e do custo anual com energia elétrica, além de assegurar que a máxima variação de carga hidráulica na linha será respeitada. Os dados de entrada são: configuração da rede hidráulica do sistema de irrigação, custo de todos os componentes da rede hidráulica e custo da energia. Os dados de saída são: custo anual total, diâmetro da tubulação em cada linha do sistema, carga hidráulica em cada ponto de derivação e altura manométrica total. Para ilustrar a potencialidade do modelo desenvolvido, ele foi aplicado em um pomar de citros no Estado de São Paulo, Brasil. O modelo demonstrou ser eficiente no dimensionamento do sistema de irrigação quanto à obtenção da uniformidade de emissão desejada. O custo anual com bombeamento deve ser considerado no dimensionamento de sistemas de irrigação por microaspersão porque ele gera menores valores de custo anual total quando comparado com a mesma alternativa que não considera aquele custo.

Design, synthesis and characterization of a hexapeptide bio-inspired by acetylcholinesterase and its interaction with pesticide dichlorvos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Vibration Control Applied in a Semi-Active Suspension using Magneto Rheological Damper and Optimal Linear Control Design

In this paper we study the behavior of a semi-active suspension witch external vibrations. The mathematical model is proposed coupled to a magneto rheological (MR) damper. The goal of this work is stabilize of the external vibration that affect the comfort and durability an vehicle, to control these vibrations we propose the combination of two control strategies, the optimal linear control and the magneto rheological (MR) damper. The optimal linear control is a linear feedback control problem for nonlinear systems, under the optimal control theory viewpoint We also developed the optimal linear control design with the scope in to reducing the external vibrating of the nonlinear systems in a stable point. Here, we discuss the conditions that allow us to the linear optimal control for this kind of non-linear system.

Influence of abutment-to-fixture design on reliability and failure mode of all-ceramic crown systems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Economic design of Shewhart control charts for monitoring autocorrelated data with skip sampling strategies

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Digital controller design considering hardware constraints: application in a paraplegic patient

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Molecular design of new P3HT derivatives: Adjusting electronic energy levels for blends with PCBM

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Double-objective economic statistical design of the VP T-2 control chart: Wald's identity approach

Research has shown that applying the T-2 control chart by using a variable parameters (VP) scheme yields rapid detection of out-of-control states. In this paper, the problem of economic statistical design of the VP T-2 control chart is considered as a double-objective minimization problem with the statistical objective being the adjusted average time to signal and the economic objective being expected cost per hour. We then find the Pareto-optimal designs in which the two objectives are met simultaneously by using a multi-objective genetic algorithm. Through an illustrative example, we show that relatively large benefits can be achieved by applying the VP scheme when compared with usual schemes, and in addition, the multi-objective approach provides the user with designs that are flexible and adaptive.

Optimized design of substrate-integrated hollow waveguides for mid-infrared gas analyzers

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cogeneration design problem Computational complexity analysis and solution through an expert system

Purpose - The purpose of this paper is twofold: to analyze the computational complexity of the cogeneration design problem; to present an expert system to solve the proposed problem, comparing such an approach with the traditional searching methods available.Design/methodology/approach - The complexity of the cogeneration problem is analyzed through the transformation of the well-known knapsack problem. Both problems are formulated as decision problems and it is proven that the cogeneration problem is np-complete. Thus, several searching approaches, such as population heuristics and dynamic programming, could be used to solve the problem. Alternatively, a knowledge-based approach is proposed by presenting an expert system and its knowledge representation scheme.Findings - The expert system is executed considering two case-studies. First, a cogeneration plant should meet power, steam, chilled water and hot water demands. The expert system presented two different solutions based on high complexity thermodynamic cycles. In the second case-study the plant should meet just power and steam demands. The system presents three different solutions, and one of them was never considered before by our consultant expert.Originality/value - The expert system approach is not a "blind" method, i.e. it generates solutions based on actual engineering knowledge instead of the searching strategies from traditional methods. It means that the system is able to explain its choices, making available the design rationale for each solution. This is the main advantage of the expert system approach over the traditional search methods. On the other hand, the expert system quite likely does not provide an actual optimal solution. All it can provide is one or more acceptable solutions.

On Switched Regulator Design of Uncertain Nonlinear Systems Using Takagi-Sugeno Fuzzy Models

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Design and Characterization of Silicone and Surfactant Based Systems for Topical Drug Delivery

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Survival rate, load to fracture, and finite element analysis of incisors and canines restored with ceramic veneers having varied preparation design

Purpose: To evaluate the survival rate, success rate, load to fracture, and finite element analysis (FEA) of maxillary central incisors and canines restored using ceramic veneers and varying preparation designs.Methods and Materials: Thirty human maxillary central incisors and 30 canines were allocated to the following four groups (n=15) based on the preparation design and type of tooth: Gr1 = central incisor with a conservative preparation; Gr2 = central incisor with a conventional preparation with palatal chamfer; Gr3 = canine with a conservative preparation; Gr4 = canine with a conventional preparation with palatal chamfer. Ceramic veneers (lithium disilicate) were fabricated and adhesively cemented (Variolink Veneer). The specimens were subjected to 4 x 106 mechanical cycles and evaluated at every 500,000 cycles to detect failures. Specimens that survived were subjected to a load to fracture test. Bidimensional models were modeled (Rhinoceros 4.0) and evaluated (MSC.Patrans 2005r2 and MSC.Marc 2005r2) on the basis of their maximum principal stress (MPS) values. Survival rate values were analyzed using the Kaplan-Meier test (alpha = 0.05) and load to fracture values were analyzed using the Student t-test (alpha = 0.05).Results: All groups showed 100% survival rates. The Student t-test did not show any difference between the groups for load to fracture. FEA showed higher MPS values in the specimens restored using veneers with conventional preparation design with palatal chamfer.Conclusion: Preparation design did not affect the fracture load of canines and central incisors, but the veneers with conventional preparation design with palatal chamfer exhibited a tendency to generate higher MPS values.

Comportamento ingestivo de cordeiros alimentados com dietas contendo feno de amoreira

The experiment was conducted to evaluate the feeding behavior of lambs fed with diets containing 0, 12.5 and 25.0% of mulberry hay as a substitute for the concentrate. Twenty four Ile de France lambs, non castrated, with 25 kg of body weight and four months old, confined, in a completely randomized design, were used. The feeding daily time (242.01 minutes), rumination (435.48 minutes) and leisure (762.50 minutes), the numbers of cakes ruminated per day (658.36) and the time spent per cake (40.03 sec) were not affected (P>0.05) by different levels of hay in mulberry concentrate. The dry matter voluntary intake (1.258 kg/day) and neutral detergent fiber intake (0.302 kg/day), as well as the efficiency of dry matter intake and rumination (316.24 and 173.54 g/h, respectively) and efficiency of neutral detergent fiber intake and rumination (75.89 and 41.68 g/h, respectively) were similar in all treatments. The ruminating chew expressed in hour/day (11.29) and the number of chews expressed per cake (72.65) and per day (47.638.06), as well as the number and the feeding time (22.02 meals and 11.23 min/meal), rumination (25.95 ruminations and 17.29 min/rumination) and idle (41.81 idle and 18.30 min/idle time), were also not affected (P>0.05). The inclusion of mulberry hay did not change the rumination expressed in g of DM and NDF/cake (1.91 and 0.46, respectively) and min/kg of DM and NDF (361.51 and 1.505.78, respectively), as well as the total chew expressed in min/kg of DM and NDF (563.70 and 2.347.19, respectively). The use of mulberry hay partially replacing the concentrated, does not change the feeding behavior of feedlot lambs.