Fibre-optic strain sensor system with temperature compensation for arch bridge condition monitoring

This paper presents an innovative sensor system, created specifically for new civil engineering structural monitoring applications, allowing specially packaged fiber grating-based sensors to be used in harsh, in-the-field measurement conditions for accurate strain measurement with full temperature compensation. The sensor consists of two fiber Bragg gratings that are protected within a polypropylene package, with one of the fiber gratings isolated from the influence of strain and thus responding only to temperature variations, while the other is sensitive to both strain and temperature. To achieve this, the temperature-monitoring fiber grating is slightly bent and enclosed in a metal envelope to isolate it effectively from the strain. Through an appropriate calibration process, both the strain and temperature coefficients of each individual grating component when incorporated in the sensor system can be thus obtained. By using these calibrated coefficients in the operation of the sensor, both strain and temperature can be accurately determined. The specific application for which these sensors have been designed is seen when installed on an innovative small-scale flexi-arch bridge where they are used for real-time strain measurements during the critical installation stage (lifting) and loading. These sensors have demonstrated enhanced resilience when embedded in or surface-mounted on such concrete structures, providing accurate and consistent strain measurements not only during installation but subsequently during use. This offers an inexpensive and highly effective monitoring system tailored for the new, rapid method of the installation of small-scale bridges for a variety of civil engineering applications.

Improvement of the Performance of Hysteresis Compensation in SMA Actuators by Using Inverse Preisach Model in Closed – Loop Control System

The aim of this paper is to increase the performance of hysteresis compensation for Shape Memory Alloy (SMA) actuators by using inverse Preisach model in closed — loop control system. This is used to reduce hysteresis effects and improve accuracy for the displacement of SMA actuators. Firstly, hysteresis is identified by numerical Preisach model implementation. The geometrical interpretation from first order transition curves is used for hysteresis modeling. Secondly, the inverse Preisach model is formulated and incorporated in closed-loop PID control system in order to obtain desired current-to-displacement relationship with hysteresis reducing. The experimental results for hysteresis compensation by using this method are also shown in this paper.

Excluding Coexistence of GMOs? The Impact of the EU Commission's 2010 Recommendation on Coexistence

In the midst of the European Union (EU) genetically modified organisms (GMOs) regime, coexistence of GM and non-GM crops alongside each other remains technically within the competence of the Member States. Post EU authorization of a GM crop, Member States may legally take appropriate measures to limit or prevent the presence of GMOs within non-GM crops. In July 2010, as part of a Cultivation Package, the Commission created a new Coexistence Recommendation that supports a flexible approach to more stringent coexistence measures by the States, while attempting to maintain control over the legitimate objectives justifying the measures. This article analyzes the impact of the 2010 Recommendation upon coexistence in the context of the existing practices and the previous 2003 Recommendation, taking into account its status as a soft law document and the ‘domino effect’. It is argued that the 2010 Recommendation may have greater practical and legal ramifications for coexistence than might first be thought. In attempting to create guidelines that allow a more flexible and inclusive approach towards national measures, the 2010 Recommendation may act as a catalyst to eventually exclude GM cultivation within Member States.

A 64-point fourier transform chip for video motion compensation using phase correlation

Details of a new low power fast Fourier transform (FFT) processor for use in digital television applications are presented. This has been fabricated using a 0.6-µm CMOS technology and can perform a 64 point complex forward or inverse FFT on real-time video at up to 18 Megasamples per second. It comprises 0.5 million transistors in a die area of 7.8 × 8 mm and dissipates 1 W. The chip design is based on a novel VLSI architecture which has been derived from a first principles factorization of the discrete Fourier transform (DFT) matrix and tailored to a direct silicon implementation.

New FFT architecture and chip design for motion compensation based on phase correlation

Details of a new low power FFT processor for use in digital television applications are presented. This has been fabricated using a 0.6 µm CMOS technology and can perform a 64 point complex forward or inverse FFT on real-rime video at up to 18 Megasamples per second. It comprises 0.5 million transistors in a die area of 7.8×8 mm and dissipates 1 W. Its performance, in terms of computational rate per area per watt, is significantly higher than previously reported devices, leading to a cost-effective silicon solution for high quality video processing applications. This is the result of using a novel VLSI architecture which has been derived from a first principles factorisation of the DFT matrix and tailored to a direct silicon implementation.

Does Job Search Monitoring Intensity Affect Unemployment? Evidence from Northern Ireland

Because unemployment benefit reforms typically package together a number of changes, few existing evaluations have been able to isolate the effects of changes in job search monitoring intensity on benefit recipient stocks or flows. Those few studies that do so draw mixed conclusions. This paper provides new estimates of monitoring impacts by exploiting plausibly exogenous periods where search monitoring has been temporarily withdrawn - with the regime otherwise unchanged - during a series of benefit office refurbishments in Northern Ireland. As we would expect from search theory, withdrawal of monitoring significantly increases the stock of unemployment benefit recipients via reduced outflows. © The London School of Economics and Political Science 2008.

Job search monitoring intensity, unemployment exit and job entry: Quasi-experimental evidence from the UK

Because unemployment benefit reforms tend to package together changes to job search requirements, monitoring and assistance, few existing studies have been able to empirically isolate the effects of job search monitoring intensity on the behaviour of unemployment benefit claimants. This paper exploits periods where monitoring has been temporarily withdrawn during a series of Benefit Office refurbishments - with the regime otherwise unchanged - to allow such identification. During these periods of zero monitoring the hazard rates for exits from claimant unemployment and for job entry both fall. © 2008 Elsevier B.V. All rights reserved.

Autonomy and regulation of state agencies:Reinforcement, indifference or compensation?

This paper analyses the relationships between the autonomy and regulation of state agencies in Norway, Ireland and Flanders (Belgium). The empirical basis is provided by broad surveys of public sector organizations carried out in 2002-2004. Three hypotheses on these relationships are formulated and examined, indicating different patterns. The reinforcement hypothesis, stating a negative relationship does not get any support. On the other hand, the compensation hypothesis, stating a positive relationship gets some support. In general, however, the indifference hypothesis, stating low or no correlations seems to be the most adequate. The hypotheses are also linked to prevalent administrative doctrines, and the empirical findings indicate how relevant they are. © Springer Science+Business Media, LLC 2008.

Rewarding Merit in Judicial Appointments?: A research project undertaken by the School of Law, Queen’s University Belfast for the Northern Ireland Judicial Appointments Commission

This research involved carrying out an online survey using a number of vignettes/scenarios to explore understandings and attitudes to judicial appointments. This sort of survey is relatively novel in this context and provided a useful way of understanding how a range of factors such as merit and seniority, career paths and connections, as well as gender and visibility, are perceived as operating within the appointments system. The research also involved a series of focus group interviews with a number of individuals with various professional backgrounds and at different levels of seniority. These, and a limited number of individual interviews, afforded an opportunity to explore more closely some of the themes arising from the scenarios as well as a chance to look in some depth at some of the views and concerns of a range of members of the legal professions.

Building upon the previous research project, this work was less concerned with revisiting earlier themes and more interested in exploring how the idea of “merit” as a governing factor in judicial appointment is seen as working in practice, and whether it is perceived as being most likely to be found within particular career profiles. We also investigated issues such as the possible development of formal and informal pathways to a judicial career and practical problems such as how an applicant might become known to the senior judiciary, and the importance of this. Overall our interest was primarily in developing an understanding of how gender is perceived to operate in the appointments process and how any barriers to recruiting women, particularly to the senior judiciary, could be further broken down.