Efeito de Pseudomonas chlororaphis sobre a podridão radicular (Pythium aphanidermatum)e o crescimento vegetal em pimentão hidropônico.

A podridão radicular causada por Pythium spp. é uma das principais doenças em cultivos hidropônicos. O objetivo do trabalho foi avaliar o efeito de Pseudomonas chlororaphis (63-28) sobre a podridão radicular e o crescimento vegetal em pimentão hidropônico. Plantas de pimentão cv. 35-206 RZ foram cultivadas em unidades hidropônicas, e infestadas com P. chlororaphis sete dias antes da inoculação com o patógeno. Os tratamentos foram: testemunha, testemunha inoculada com o patógeno, P. chlororaphis, P. chlororaphis com a adição do patógeno. As variáveis avaliadas foram: severidade da doença, expansão foliar, clorofila foliar e incidência do patógeno. A severidade da doença decresceu em 51% nas plantas inoculadas com a bactéria aos 12 dias após a inoculação, em comparação com a testemunha inoculada. O conteúdo de clorofila decresceu em 12% nas plantas inoculadas com Pythium, em comparação com a testemunha. Plantas tratadas com P. chlororaphis sem a presença do patógeno tiveram maior taxa de expansão foliar. Conclui-se que P. chlororaphis é um promissor agente de controle biológico da podridão radicular e promotor de crescimento de pimentão hidropônico.

Avaliação da espécie vegetal Croton cajucara Benth como inibidor de biocorrosão em aço carbono Aisi 1020

Actually in the oil industry biotechnological approaches represent a challenge. In that, attention to metal structures affected by electrochemical corrosive processes, as well as by the interference of microorganisms (biocorrosion) which affect the kinetics of the environment / metal interface. Regarding to economical and environmental impacts reduction let to the use of natural products as an alternative to toxic synthetic inhibitors. This study aims the employment of green chemistry by evaluating the stem bark extracts (EHC, hydroalcoholic extract) and leaves (ECF, chloroform extract) of plant species Croton cajucara Benth as a corrosion inhibitor. In addition the effectiveness of corrosion inhibition of bioactive trans-clerodane dehydrocrotonin (DCTN) isolated from the stem bark of this Croton was also evaluated. For this purpose, carbon steel AISI 1020 was immersed in saline media (3,5 % NaCl) in the presence and absence of a microorganism recovered from a pipeline oil sample. Corrosion inhibition efficiency and its mechanisms were investigated by linear sweep voltammetry and electrochemical impedance. Culture-dependent and molecular biology techniques were used to characterize and identify bacterial species present in oil samples. The tested natural products EHC, ECF and DCTN (DMSO as solvent) in abiotic environment presented respectively, corrosion inhibition efficiencies of 57.6% (500 ppm), 86.1% (500 ppm) and 54.5% (62.5 ppm). Adsorption phenomena showed that EHC best fit Frumkin isotherm and ECF to Temkin isotherm. EHC extract (250 ppm) dissolved in a polar microemulsion system (MES-EHC) showed significant maximum inhibition efficiency (93.8%) fitting Langmuir isotherm. In the presence of the isolated Pseudomonas sp, EHC and ECF were able to form eco-compatible organic films with anti-corrosive properties

Nonlinear combining and compression in multicore fibers

We demonstrate numerically light-pulse combining and pulse compression using wave-collapse (self-focusing) energy-localization dynamics in a continuous-discrete nonlinear system, as implemented in a multicore fiber (MCF) using one-dimensional (1D) and 2D core distribution designs. Large-scale numerical simulations were performed to determine the conditions of the most efficient coherent combining and compression of pulses injected into the considered MCFs. We demonstrate the possibility of combining in a single core 90% of the total energy of pulses initially injected into all cores of a 7-core MCF with a hexagonal lattice. A pulse compression factor of about 720 can be obtained with a 19-core ring MCF.

Knowledge and attitudes towards dietary fibers - romania vs other european countries

Aim: The aim of our study was to evaluate the Romanian’s knowledge and attitudes regarding dietary fibers compared with other European countries. Materials and methods: We made a cross-sectional survey (part of multinational project from CI&DETS Research Centre, Instituto Politecnico Viseu, Portugal, with reference PROJ/CI&DETS/2014/0001) based on a questionnaire applied in 2015, over 670 Romanian consumers, focused on the attitudes and knowledge towards ingestion of foods rich in fibers. We used the software SPSS for statistics. Results: Our results showed that the knowledge about dietary fibers and also the ingestion of food products rich in fibers were low. The female participants ate more whole grains and fruits than males and pay more attention to food labelling, the Romanian people prefer to stay and eat home than at restaurants especially in rural areas, and the knowledge about fiber’s benefits was significantly related to high education and urban location. Comparing to other European countries, Romania had the highest level of knowledge about dietary fibers definition followed by Portugal, Turkey and Hungary, but the lowest regarding the fibers importance for health after Macedonia, Turkey and Latvia. Conclusion: We sustain the needs for more efficient community interventions and proper information about the importance of dietary fibers for our health and also for the dissemination of the nutritional standards among Romanian population.

Romanian Knowledge and Attitudes regarding Dietary Fibers

Presently, the scientists recognize the health benefits of food fibers in the menu and also plant food sources are at high interest both for general population and food companies. The food companies are responsible for a clear nutrition labelling that will assist consumers to make informed and healthy choices and health providers has to inform the population about the benefits of fibers.The aim of our study was to evaluate the Romanian knowledge and attitudes regarding dietary fibers from food products. We made a qualitative survey based on a questionnaire applied in 2015, over a period of 6 months, over 670 Romanian consumers. It was focused on testing the attitudes and knowledge towards ingestion of foods rich in fibers. For all data analysis we used the software SPSS, from IBM Inc. Our results showed that the knowledge about dietary fibers and also the ingestion of food products rich in fibers were low, and most of the subjects didn’t have any interest to read the nutritional information from food labels. The female participants ate more whole grains and fruits than males and pay more attention to food labelling. Romanian people prefer to stay and eat home than at restaurants especially in rural areas, and the knowledge about fibers benefits was significantly related to education and urban location. We underline the needs for more efficient community interventions and proper information about the importance of dietary fibers for our health and also to improve and disseminate nutritional standards and diet recommendation among population.

Acervo vegetal da botica do Mosteiro de Alcobaça – Espaço, proveniências e uso – notas preliminares

A Ordem de Cister, implantada em Portugal com o beneplácito de D. Afonso Henriques, cujo objetivo era proceder ao povoamento de grandes parcelas de território recentemente conquistado aos Mouros, surgiu quando em 8 de Abril de 1153, este doou ao Abade do Mosteiro de Claraval, S. Bernardo, com o privilégio de couto, o lugar de Alcobaça, estabelecendo assim a fundação de Abadia de Alcobaça que se tornou a Casa-Mãe da Ordem em Portugal. Esta ordem religiosa deixou, desde a sua fundação, marcas muito expressivas em áreas diversificadas, que vão desde a implantação de um número considerável de casas religiosas, à construção de edifícios de grande qualidade arquitetónica, ao povoamento e consolidação do território, ao ensino a vários níveis, incluindo o da agricultura com a introdução de práticas mais desenvolvidas e eficazes, à criação de boticas nos seus mosteiros para prestar auxílio não apenas às comunidades residentes, mas também à população em geral que acorria em busca de auxílio.

Extrato vegetal de cipó d'alho no controle in vitro de Thielaviopsis sp.

2016

Coleção de DNA vegetal da Embrapa Amazônia Oriental: inventário atual.

Várias estratégias de conservação de germoplasma estão disponíveis e devem ser conduzidas em conjunto para serem mais representativas e eficientes. Dentre elas tem-se a conservação de DNA, valiosa fonte de informações para subsidiar o manejo de Bancos Ativos de Germoplasma. Mas, para cumprir esse papel necessita ser inventariada e organizada. Assim, realizou-se o inventário das amostras de DNA vegetal conservadas na coleção da Embrapa Amazônia Oriental. No período de maio a julho/2016 foi realizado inventário com 100% de cobertura das amostras de DNA vegetal que compõem a coleção de DNA da Embrapa Amazônia Oriental para serem organizadas por família, espécie e documentadas para viabilizar seu manejo. A coleção apresentou 9.574 amostras de DNA, sendo grande parte deles representantes de acessos dos BAG?s conservados em nível de campo. As amostras agregaram 8 famílias, 12 gêneros e 21 espécies, com a família Arecaceae sendo a melhor representada seguida da Euphorbiaceae. Portanto, essa coleção apresenta possibilidade de fornecer subsídios para o manejo dos BAG?s bem representados, além de fornecer políticas relacionadas à sua coleta, conservação, documentação e melhoramento genéticos das espécies.

Caracterização molecular de bactérias promotoras do crescimento vegetal isoladas de milho por meio da amplificação do Gene nifH perfis de ARDRA.

Há poucas informações a respeito da diversidade e do potencial biotecnológico dos micro-organismos do solo no Semiárido, em especial daqueles envolvidos com processo de fixação biológica de nitrogênio. O objetivo deste trabalho foi determinar a diversidade de uma coleção de bactérias associadas ao milho (Zea mays L.) em solos do Semiárido. As bactérias foram avaliadas quanto à amplificação de um fragmento do gene nifH por meio de PCR e pela técnica de ARDRA. Dentre as 72 bactérias testadas, 47 foram considerados nifH positivos e a análise dos perfis de ARDRA mostrou que o local de origem dos isolados foi fator determinante para o agrupamento das bactérias.

Esgotamento dos recursos finitos - o caso do extrativismo vegetal na Amazônia.

1983

Intocabilidade, exploração econômica e depredação dos recursos naturais: o caso do extrativismo vegetal na Amazônia.

1985

Evaluation of recycled carbon fibers as PLA reinforcement for additive manufacturing applications

The increased exploitation of carbon fiber reinforced polymers (CFRP) is inevitably bringing about an increase in production scraps and end-of-life components, resulting in a sharp increase in CFRP waste. Therefore, it is of paramount importance to find efficient ways to reintroduce waste into the manufacturing cycle. At present, several recycling methods for treating CFRPs are available, even if all of them still have to be optimized. The step after CFRP recycling, and also the key to build a solid and sustainable CFRP recycling market, is represented by the utilization of Re-CFs. The smartest way to utilize recovered carbon fibers is through the manufacturing of recycled CFRPs, that can be done by re-impregnating the recovered fibers with a new polymeric matrix. Fused Filament Fabrication (FFF) is one of the most widely used additive manufacturing (3D printing) techniques that fabricates parts with a polymeric filament deposition process that allows to produce parts adding material layer-by-layer, only where it is needed, saving energy, raw material cost, and waste. The filament can also contain fillers or reinforcements such as recycled short carbon fibers and this makes it perfectly compliant with the re-application of the shortened recycled CF. Therefore, in this thesis work recycled and virgin carbon fiber reinforced PLA filaments have been initially produced using 5% and 10% of CFs load. Properties and characteristics of the filaments have been determined conducting different analysis (TGA, DMA, DSC). Subsequently the 5%wt. Re-CFs filament has been used to 3D print specimens for mechanical characterization (DMA, tensile test and CTE), in order to evaluate properties of printed PLA composites containing Re-CFs and evaluate the feasibility of Re-CFs in 3D printing application.

Hyperspectral imaging and other optical techniques for (in-field/in-lab) physico-chemical attributes estimation of agri-food vegetal products

In the agri-food sector, measurement and monitoring activities contribute to high quality end products. In particular, considering food of plant origin, several product quality attributes can be monitored. Among the non-destructive measurement techniques, a large variety of optical techniques are available, including hyperspectral imaging (HSI) in the visible/near-infrared (Vis/NIR) range, which, due to the capacity to integrate image analysis and spectroscopy, proved particularly useful in agronomy and food science. Many published studies regarding HSI systems were carried out under controlled laboratory conditions. In contrast, few studies describe the application of HSI technology directly in the field, in particular for high-resolution proximal measurements carried out on the ground. Based on this background, the activities of the present PhD project were aimed at exploring and deepening knowledge in the application of optical techniques for the estimation of quality attributes of agri-food plant products. First, research activities on laboratory trials carried out on apricots and kiwis for the estimation of soluble solids content (SSC) and flesh firmness (FF) through HSI were reported; subsequently, FF was estimated on kiwis using a NIR-sensitive device; finally, the procyanidin content of red wine was estimated through a device based on the pulsed spectral sensitive photometry technique. In the second part, trials were carried out directly in the field to assess the degree of ripeness of red wine grapes by estimating SSC through HSI, and finally a method for the automatic selection of regions of interest in hyperspectral images of the vineyard was developed. The activities described above have revealed the potential of the optical techniques for sorting-line application; moreover, the application of the HSI technique directly in the field has proved particularly interesting, suggesting further investigations to solve a variety of problems arising from the many environmental variables that may affect the results of the analyses.

Biopolyester fibers for sustainable and biocompatible applications

The rising of concerns around the scarcity of non-renewable resources has raised curiosity around new frontiers in the polymer science field. Biopolymers is a general term describing different kind of polymers that are linked with the biological world because of either monomer derivation, end of life degradation or both. The current work is aimed at studying one example of both biopolymers types. Polyhydroxibutyrate (P3HB) is a biodegradable microbial-produced polymer which holds massive potentiality as a substitute of polyolefins such as polypropylene. Though, its highly crystalline nature and stereoregularity of structure make it difficult to work with. The project P3HB-Mono take advantage of polarized Raman spectroscopy to see how annealing of chains with different weights influence the crystallinity and molecular structure of the polymer, eventually reflecting on its mechanical properties. The technique employed is also optimal in order to see how mesophase, a particular conformation of chains different from crystalline and amorphous phase, develops in the polymer structure and changes depending on temperature and mechanical stress applied to the fiber. Polycaprolactone (PCL) on the other hand is a biodegradable fossil-fuel polymer which has biocompatibility and bio-resorbability features. As a consequence this material is very appealing for medical industry and can be used for different applications in this field. One interesting option is to produce narrow and long liquid filled fibers for drug delivery inside human body, using a traditional technique in an innovative way. The project BioLiCoF investigates the feasability of producing liquid filled fibers using melt-spinning techniques and will examine the role that melt-spinning parameters and liquids employed as a core solution have on the final fiber. The physical analysis of the fibers is also interpreted and idea on future developments of the trials are suggested.

An Isoflavone From Dipteryx Alata Vogel Is Active Against The In Vitro Neuromuscular Paralysis Of Bothrops Jararacussu Snake Venom And Bothropstoxin I, And Prevents Venom-induced Myonecrosis.

Snakebite is a neglected disease and serious health problem in Brazil, with most bites being caused by snakes of the genus Bothrops. Although serum therapy is the primary treatment for systemic envenomation, it is generally ineffective in neutralizing the local effects of these venoms. In this work, we examined the ability of 7,8,3'-trihydroxy-4'-methoxyisoflavone (TM), an isoflavone from Dipteryx alata, to neutralize the neurotoxicity (in mouse phrenic nerve-diaphragm preparations) and myotoxicity (assessed by light microscopy) of Bothrops jararacussu snake venom in vitro. The toxicity of TM was assessed using the Salmonella microsome assay (Ames test). Incubation with TM alone (200 μg/mL) did not alter the muscle twitch tension whereas incubation with venom (40 μg/mL) caused irreversible paralysis. Preincubation of TM (200 μg/mL) with venom attenuated the venom-induced neuromuscular blockade by 84% ± 5% (mean ± SEM; n = 4). The neuromuscular blockade caused by bothropstoxin-I (BthTX-I), the major myotoxic PLA2 of this venom, was also attenuated by TM. Histological analysis of diaphragm muscle incubated with TM showed that most fibers were preserved (only 9.2% ± 1.7% were damaged; n = 4) compared to venom alone (50.3% ± 5.4% of fibers damaged; n = 3), and preincubation of TM with venom significantly attenuated the venom-induced damage (only 17% ± 3.4% of fibers damaged; n = 3; p < 0.05 compared to venom alone). TM showed no mutagenicity in the Ames test using Salmonella strains TA98 and TA97a with (+S9) and without (-S9) metabolic activation. These findings indicate that TM is a potentially useful compound for antagonizing the neuromuscular effects (neurotoxicity and myotoxicity) of B. jararacussu venom.