Characterization of a polymer-infiltrated ceramic-network material

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of Post-silanization Heat Treatments of Silanized Feldspathic Ceramic on Adhesion to Resin Cement

Purpose: To evaluate the effect of post-silanization heat treatment of a silane agent and rinsing with hot water of silanized CAD/CAM feldspathic ceramic surfaces on the microtensile bond strength between resin cement and the ceramic, before and after mechanical cycling.Materials and Methods: Blocks measuring 10 x 5.7 x 3.25 mm(3) were produced from feldspathic ceramic cubes (VITA Mark II, VITA Zanhfabrik). Each ceramic block was duplicated in composite resin using a template made of polyvinylsiloxane impression material. Afterwards, ceramic and corresponding resin composite blocks were ultrasonically cleaned and randomly divided according to the 5 strategies used for conditioning the ceramic surface (n = 10): GHF: etching with hydrofluoric acid 10% + rinsing with water at room temperature + silanization at 20 degrees C; G20: silanization; G77: silanization + oven drying at 77 degrees C; G20r: silanization + hot water rinsing; G77r: silanization + oven drying at 77 C + hot water rinsing. The resin and ceramic blocks were cemented using a dual-curing resin cement. Every group was divided in two subgroups: aging condition (mechanical cycling, designated as a) or non-aging (designated as n). All the bonded assemblies were sectioned into microsticks for microtensile bond strength (mu TBS) testing. The failure mode of the tested specimens was assessed and mu TBS data were statistically analyzed in two ways: first 2-way ANOVA (GHF, G20 and G77 in non-aging/aging conditions) and 3-way ANOVA (temperature x rinsing x aging factors, excluding GHF), followed by Tukey's test (p = 0.05).Results: The 2-way ANOVA revealed that the mu TBS was significantly affected by the surface treatment (p < 0.001) but not by aging (p = 0.68), and Tukey's test showed that G77-n/G77-a (18.0 MPa) > GHF-n/GHF-a (12.2 MPa) > G20-n/G20-a (9.1 MPa). The 3-way ANOVA revealed that the mu TBS was significantly affected by the heat treatment and rinsing factors (p < 0.001), but not affected by aging (p = 0.36). The rinsing procedure decreased, while oven drying increased the bond strengths. Group G77, in both non-aging and aging conditions (18.6-17.4 MPa), had the highest bond values. Failure modes were mainly mixed for all groups.Conclusion: Oven drying at 77 degrees C improved the bond strength between the resin cement and feldspathic ceramic, but hot water rinsing reduced the bond strength and should not be recommended.

Retenção de água em dois tipos de latossolos sob diferentes usos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Removable Partial Dentures: Use of Rapid Prototyping

The CAD/CAM technology associated with rapid prototyping (RP) is already widely used in the fabrication of all-ceramic fixed prostheses and in the biomedical area; however, the use of this technology for the manufacture of metal frames for removable dentures is new. This work reports the results of a literature review conducted on the use of CAD/CAM and RP in the manufacture of removable partial dentures.

Projeto de conjunto redutor de velocidade utilizando engrenagem sem-fim

This work is initially based in give a solution to a problem consisting of lifting a load in a warehouse focusing specifically on the solution´s project and comparison of the results obtained following the sequence of the book and comparing these results with the finite elements simulation based on the 3D components modeling. Starting from that was realized the project of the worm gear reducer to solve the problem and makes the work easier. The project consisted basically of the study, project itself and simulation by software of a worm gear reducer and projects steps, starting with the initial problem conditions (to lifting a load up to an specific height at a given time) following all the reducer project sequence, starting by the preliminary draft and electric motor selection using iterative process, material selection, worm gear dimensioning, axles, keyways, bearings and coupling. After that was performed the three dimensional modeling of the components using SolidWorks software and simulating these components using Ansys software. The results show the importance of the CAD in terms of improving project development speed and reducing costs with prototypes

Simplificação de malhas visando representações em multirresolução

The representation of real objects in virtual environments has applications in many areas, such as cartography, mixed reality and reverse engineering. The generation of these objects can be performed through two ways: manually, with CAD (Computer Aided Design) tools, or automatically, by means of surface reconstruction techniques. The simpler the 3D model, the easier it is to process and store it. However, this methods can generate very detailed virtual elements, that can result in some problems when processing the resulting mesh, because it has a lot of edges and polygons that have to be checked at visualization. Considering this context, it can be applied simplification algorithms to eliminate polygons from resulting mesh, without change its topology, generating a lighter mesh with less irrelevant details. The project aimed the study, implementation and comparative tests of simplification algorithms applied to meshes generated through a reconstruction pipeline based on point clouds. This work proposes the realization of the simplification step, like a complement to the pipeline developed by (ONO et al., 2012), that developed reconstruction through cloud points obtained by Microsoft Kinect, and then using Poisson algorithm

Um método para reconstrução de superfícies baseado em nuvem de pontos visando representações em multirresolução

The representation of real objects in virtual environments has applications in many areas, such as cartography, mixed reality and reverse engineering. The generation of these objects can be performed in two ways: manually, with CAD (Computer Aided Design) tools, or automatically, by means of surface reconstruction techniques. The simpler the 3D model, the easier it is to process and store it. Multiresolution reconstruction methods can generate polygonal meshes in different levels of detail and, to improve the response time of a computer program, distant objects can be represented with few details, while more detailed models are used in closer objects. This work presents a new approach to multiresolution surface reconstruction, particularly interesting to noisy and low definition data, for example, point clouds captured with Kinect sensor

Cetoacidose diabética em pequenos animais

Diabetic ketoacidosis (DKA) is one of the most serious complications of Diabetes Mellitus (DM) in small animals (SILVA, 2006). It is an acute metabolic disorder, potentially fatal, both in humans and in dogs and cats with DM (BRUYETTE, 1997), being related, mostly, to insulin-dependent diabetics (CHASTAIN, 1981; HUME et al., 2006). DKA is a medical emergency characterized by extreme metabolic abnormalities, including hyperglycemia, metabolic acidosis, ketonemia, dehydration and electrolyte loss (MACINTIRE, 2006) and its diagnosis may be established basically by the detection of ketonuria and metabolic acidosis (NELSON, 2009). The primary purposes of the treatment of DKA are intravascular volume restoration, dehydration, acid-base and electrolyte’s imbalances correction and blood glucose concentration reduction (BOYSEN, 2008). The treatment’s success depends of the clinical status at the time of diagnosis and of the introduction of an appropriate therapy to the conditions of each patient (CHASTAIN, 1981)

Análise da dinâmica do uso da terra e sua interferência em enchentes na área urbana do município de Americana (SP)

Due to an intense process of population growth and urban density in Americana (SP), mainly due to the development of the local textile industry after 1970, there was, concomitant to the occupation of the margin of rivers and streams, soil sealing that increased the level of superficial runoff, triggering frequent floods. Based on the analysis of these processes we investigate the conditions of one densely urbanized area of the county, the Córrego do Parque, in three time series, 1977, 1996 and 2008. Taking as the starting the characterization and spatial distribution of landscape physiography, we prepared thematic letters and synthetic maps digital scale 1:10,000 from photointerpretation of aeroframes. The thematic maps were produced by scanning with subsequent edition using the software Auto-Cad Map. Checking the data and of geographic coordinates with GPS (Global Positioning System). Regarding land use classes, we used the description of the Soil Conservation Service (1975) which allowed us to get the Curve Number parameter, which will be used in hydrologic modeling for verification of flooding (Tucci, 1989). For the process of hydrologic modeling, we used models based on Methodology Object Oriented Modeling Applied to Water Resource Systems, Viegas Filho (1999), using the computer program called IPHS1, which uses models of the Soil Conservation Service (SCS , 2004), for conversion of rainfall-runoff and the spread of excessive rain. The results indicate that increased waterproofing generated by the change in use and occupation over the past decades promoted the increased surface runoff and drainage system overload, increasing the intensity of floods

Efeito de diferentes espessuras, técnicas de aplicação e protocolos de resfriamento na resistência à fratura da cerâmica de cobertura aplicada sobre infraestrutura de y-tzp

Pós-graduação em Odontologia Restauradora - ICT

Modelagem computacional das túnicas cardíacas para processamento e controle de qualidade

This paper considers a study of the anatomical features of the cardiac system and a three-dimensional model of the different tunics that comprise the heart wall, for processing and quality control of radiological images. The structures are built by the layer overlapping method, where a layer can be understood as a slice of the three-dimensional object. The pericardium, myocardium and endocardium were represented with three-dimensional cylinders and hexagons. The spatial arrangement of the cardiac system is determined by an background image of a real model, which values are defined according to the shape of the region and on the anatomical patients characteristics. The results are significant, considering the anatomical structures details, as well as the representation of the thicknesses of the regions of the heart wall. The validation of the anatomical model was accomplished through comparisons with dimensions obtained from a real model and allows verifying that the model is appropriate. The degree of representation will allow the verification of the influence of radiological parameters, morphometric peculiarities and stage of the diseases on the quality of the images, as well as on the performance of the Computer-Aided Diagnosis (CAD).

Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítio

Pós-graduação em Odontologia Restauradora - ICT

Extrato hidroalcoólico de Punica granatum Linn. sobre Staphylococcus spp. isolado de leite bovino

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da limpeza pós-condicionamento e do tratamento térmico do silano na resistência de união de um cimento resinoso à cerâmica

Pós-graduação em Odontologia - FOA