Sex copiosissimi indices [Texto impreso] : diu multumque hactenus ab omnibus desiderati summae theologicae D. Thomae Aquinatis

Port. con grab. que representa el rostro de Santo Tomas

Barreras para la práctica de actividad física y deportiva en las personas adultas de la Comunidad de Madrid. Desarrollo y validación de un instrumento

El propósito de este estudio fue la construcción y validación de un instrumento de medición de barreras a la práctica de la actividad física y deportiva por parte de las personas adultas desde la teoría ecológico social y analizar la presencia de las diferentes barreras así como las innovaciones y alternativas de conciliación a las barreras relacionadas con el empleo, el cuidado de hijos e hijas y las tareas del hogar, identificando las posibles diferencias existentes en función del género y del tipo de demanda en la población adulta de la Comunidad de Madrid. Se ha realizado un estudio cuantitativo, descriptivo y transversal en una muestra representativa de la población residente en la Comunidad de Madrid entre 30 y 64 años. El tipo de muestreo fue probabilístico, de tipo polietápico según tamaño demográfico de municipio y género, con un margen de error del ± 5,27% y un intervalo de confianza del 95,5%. El tamaño de la muestra final fue de 360 personas (50,3% mujeres, 49,7% hombres), quienes completaron un cuestionario estructurado mediante entrevista personal cara a cara en su domicilio entre octubre y diciembre de 2011, que incluía una escala de barreras específica, así como sub-cuestionarios de innovaciones y alternativas de conciliación vinculados a los tres ítems relacionados con el empleo, cuidado de hijos e hijas y hogar de la escala de barreras. La escala de barreras fue completada por las personas practicantes de actividad física y deportiva que deseaban realizar otra actividad, es decir, por la Demanda Establecida, así como por las personas no practicantes pero deseosas de hacerlo o Demanda Latente, y las personas no practicantes no interesadas en practicar o Demanda Ausente (n=246). Las personas que alcanzaron elevadas puntuaciones en los tres ítems de la escala de barreras vinculados al empleo, cuidado de hijos e hijas y hogar, completaron sub-cuestionarios específicos de innovaciones y alternativas de conciliación vinculados a estas barreras. Para el estudio métrico de los ítems y la dimesionalidad de la escala de barreras se llevaron a cabo análisis descriptivos de los ítems, análisis correlacionales y análisis factoriales exploratorios (AFE). Como resultado se obtuvo una escala de barreras constituida por 13 ítems que explicaron el 59,1% de la variabilidad total de los datos, agrupados en cuatro dimensiones denominadas: Barreras Interpersonales (2 ítems), Barreras Individuales (4 ítems), Barreras Comunidad-Institucionales (4 ítems) y Barreras Obligaciones-Tiempo (3 ítems). Los datos de la escala de barreras y los sub-cuestionarios de innovaciones y alternativas de conciliación fueron analizados con el SPSS v. 18. Para la comparación de variables cuantitativas y ordinales se utilizaron ANOVAS de dos factores (género por tipo de demanda), el tamaño del efecto para esta prueba se cuantificó mediante eta cuadrado. Los resultados se expresaron como porcentajes para las variables nominales y como medias y desviaciones típicas para las variables ordinales y cuantitativas. El nivel de riesgo se fijó en 0,05. El instrumento presentó una fiabilidad aceptable (α=0,58) en consonancia con el modelo ecológico social presentando dimensiones que explicaron los niveles de influencia de las diferentes esferas. Los resultados obtenidos permitieron avalar tanto la adecuación de las propiedades psicométricas de los ítems, así como la validez y fiabilidad de la escala de barreras para la práctica de actividad física y deportiva. Los distintos análisis realizados han aportado evidencia de la validez de una estructura de cuatro dimensiones acorde a los planteamientos teóricos previos de los modelos ecológicos sociales. En la dimensión barreras Individuales se identificaron diferencias según el tipo de demanda (F2,237=40,28; p<0,001; η2=0,25) y el género (F1,237=8,72; p<0,01; η2=0,84). En la dimensión barreras Interpersonales se identificaron diferencias de género (F1,239 =14,9; p<0,01; η2=0,06) pero no entre demandas (F2,239=2,35; p>0,05; 1-β=0,47). En la dimensión Barreras Obligaciones-Tiempo se identificaron diferencias en función del tipo de demanda (F2,239=3,88; p<0,05; η2=0,03) sin presentar diferencias entre hombres y mujeres (F1,239=1,06; p>0,05; 1-β=0,18). Por último, en la dimensión Comunidad Institucionales, se identificaron diferencias en función del tipo de demanda (F2,240=5,69; p<0,01; η2=0,045) y no hubo diferencias en función del género (F1,240=0,65; p>0,05; 1-β=0,13). Las innovaciones y alternativas de conciliación relacionadas con el empleo más valoradas fueron la de flexibilidad en los horarios de trabajo y adecuación de horarios; las más valoradas relacionadas con la barrera cuidado de hijos fueron que en la instalación deportiva se ofertaran actividades físicas conjuntas, en las en las que pudiesen participar madres e hijos y que la instalación deportiva ofreciera, en el mismo horario, actividades para ellos y sus hijos, y, por último, las más valoradas en relación con las tareas del hogar, una mayor implicación de la pareja seguida por una mayor implicación de los hijos. ABSTRACT The objectives of this study were to build and validate an instrument to measure the barriers of adult people to the practice of sport and physical activities from the perspective of the social-ecological theory, analyse the presence of the different barriers, as well as the innovations and alternatives regarding conciliation with work and the care of children and home as barriers, identifying the possible differences that exist based on gender and the type of demand of the adult population within the Community of Madrid. For this, a quantitative, descriptive and transversal study was carried out on a representative sample of the resident population of the Community of Madrid, ages ranging from 30 to 64 years old. Given that is an infinite or very large population, and working with an interval of confidence of the 95,5%, and assuming in the population variance, the worst case of p equal to q, the margin of sampling error was ± 5,27. The sample consisted of 360 people (50,3% women, 49,7% men), who completed a questionnaire during face-to-face personal interviews between October and December 2011. The questionnaire included a scale of specific barriers, as well as sub-questionnaires on the innovations and alternatives linked to the three items regarding work, the care of children and home of the barriers scale. The barriers scale was completed by people who practice physical and sport activities and wanted to do other activities, i.e. by the Established Demand; by people who do not practice these activities but would like to do so, i.e. Latent Demand; and by people who do not practice these activities and have no desire to do so, i.e. Absent Demand (n=246). The people who peaked on the three items of the barriers scale regarding work, the care of children and home, then completed specific sub-questionnaires on the innovations and alternatives for conciliation related to these barriers. The metric study of the items and the dimensionality of the barriers scale was carried out through descriptive analyses of the items, as well as correlation analyses and exploratory factor analyses (EFA). This resulted in a barriers scale composed of 13 items that explained 59,1% of the total variability of the data, grouped in four dimensions as follows: Interpersonal Barriers (2 items), Individual Barriers (4 items), Community-Institutional Barriers (4 items) and Obligations-Time Barriers (3 items). The data obtained from the barriers scale and sub-questionnaires on the innovations and alternatives for conciliation were analyzed using software SPSS v. 18. Two-way ANOVA (gender by type of demand) was used for the comparison of quantitative and ordinal variables, and the effect size for this test was quantified with eta squared. The results were expressed as percentages for nominal variables, and as means and standard deviations for quantitative and ordinal variables. The level of risk was set at 0,05. The instrument showed an acceptable reliability (α=0,58) in line with the social-ecological model, providing dimensions that explained the influence levels of the different spheres. The results obtained establish both the adaptation of the psychometric properties of the items, and the validity and reliability of the barriers scale for the practice of physical and sport activities. The different analyses have supported the validity of a four-dimensional structure consistent with the previous theoretical approaches on the social-ecological models, while showing adequate statistical indices. The differences identified in the Individual Barriers dimension were based on the type of demand (F2,237=40,28; p<0,001; η2=0,25) and gender (F1,237=8,72; p<0,01; η2=0,84). The differences identified in the Interpersonal Barriers dimension were based on gender (F1,239 =14,9; p<0,01; η2=0,06) but not on demand (F2,239=2,35; p>0,05; 1-β=0,47). The differences identified for the Obligations-Time Barriers dimension were based on the type of demand (F2,239=3,88; p<0,05; η2=0,03) and did not show differences between men and women (F1,239=1,06; p>0,05; 1-β=0,18). Finally, the differences identified for the Community-Institutional Barriers dimension were based on the type of demand (F2,240=5,69; p<0,01; η2=0,045) and provided no differences based on gender (F1,240=0,65; p>,05; 1-β=0,13). The most valued innovations and alternatives for conciliation regarding work were the adaptation and flexibility of working hours and timetables; the most valued related to the care of children were the offer of joint activities for adults and children in sport centres, as well as separate activities within the same timetable; and, finally, the most valued regarding the home was a higher degree of participation and involvement on the part of the spouse or partner, followed by a higher degree of participation and involvement on the part of the children.

Método experimental para la caracterización de las diferentes tecnologías de integración arquitectónica de la energía fotovoltaica en condiciones de funcionamiento real = Experimental method for characterization of several building integrated photovoltaic technologies under real working conditions

Hoy en día, el proceso de un proyecto sostenible persigue realizar edificios de elevadas prestaciones que son, energéticamente eficientes, saludables y económicamente viables utilizando sabiamente recursos renovables para minimizar el impacto sobre el medio ambiente reduciendo, en lo posible, la demanda de energía, lo que se ha convertido, en la última década, en una prioridad. La Directiva 2002/91/CE "Eficiencia Energética de los Edificios" (y actualizaciones posteriores) ha establecido el marco regulatorio general para el cálculo de los requerimientos energéticos mínimos. Desde esa fecha, el objetivo de cumplir con las nuevas directivas y protocolos ha conducido las políticas energéticas de los distintos países en la misma dirección, centrándose en la necesidad de aumentar la eficiencia energética en los edificios, la adopción de medidas para reducir el consumo, y el fomento de la generación de energía a través de fuentes renovables. Los edificios de energía nula o casi nula (ZEB, Zero Energy Buildings ó NZEB, Net Zero Energy Buildings) deberán convertirse en un estándar de la construcción en Europa y con el fin de equilibrar el consumo de energía, además de reducirlo al mínimo, los edificios necesariamente deberán ser autoproductores de energía. Por esta razón, la envolvente del edifico y en particular las fachadas son importantes para el logro de estos objetivos y la tecnología fotovoltaica puede tener un papel preponderante en este reto. Para promover el uso de la tecnología fotovoltaica, diferentes programas de investigación internacionales fomentan y apoyan soluciones para favorecer la integración completa de éstos sistemas como elementos arquitectónicos y constructivos, los sistemas BIPV (Building Integrated Photovoltaic), sobre todo considerando el próximo futuro hacia edificios NZEB. Se ha constatado en este estudio que todavía hay una falta de información útil disponible sobre los sistemas BIPV, a pesar de que el mercado ofrece una interesante gama de soluciones, en algunos aspectos comparables a los sistemas tradicionales de construcción. Pero por el momento, la falta estandarización y de una regulación armonizada, además de la falta de información en las hojas de datos técnicos (todavía no comparables con las mismas que están disponibles para los materiales de construcción), hacen difícil evaluar adecuadamente la conveniencia y factibilidad de utilizar los componentes BIPV como parte integrante de la envolvente del edificio. Organizaciones internacionales están trabajando para establecer las normas adecuadas y procedimientos de prueba y ensayo para comprobar la seguridad, viabilidad y fiabilidad estos sistemas. Sin embargo, hoy en día, no hay reglas específicas para la evaluación y caracterización completa de un componente fotovoltaico de integración arquitectónica de acuerdo con el Reglamento Europeo de Productos de la Construcción, CPR 305/2011. Los productos BIPV, como elementos de construcción, deben cumplir con diferentes aspectos prácticos como resistencia mecánica y la estabilidad; integridad estructural; seguridad de utilización; protección contra el clima (lluvia, nieve, viento, granizo), el fuego y el ruido, aspectos que se han convertido en requisitos esenciales, en la perspectiva de obtener productos ambientalmente sostenibles, saludables, eficientes energéticamente y económicamente asequibles. Por lo tanto, el módulo / sistema BIPV se convierte en una parte multifuncional del edificio no sólo para ser física y técnicamente "integrado", además de ser una oportunidad innovadora del diseño. Las normas IEC, de uso común en Europa para certificar módulos fotovoltaicos -IEC 61215 e IEC 61646 cualificación de diseño y homologación del tipo para módulos fotovoltaicos de uso terrestre, respectivamente para módulos fotovoltaicos de silicio cristalino y de lámina delgada- atestan únicamente la potencia del módulo fotovoltaico y dan fe de su fiabilidad por un período de tiempo definido, certificando una disminución de potencia dentro de unos límites. Existe también un estándar, en parte en desarrollo, el IEC 61853 (“Ensayos de rendimiento de módulos fotovoltaicos y evaluación energética") cuyo objetivo es la búsqueda de procedimientos y metodologías de prueba apropiados para calcular el rendimiento energético de los módulos fotovoltaicos en diferentes condiciones climáticas. Sin embargo, no existen ensayos normalizados en las condiciones específicas de la instalación (p. ej. sistemas BIPV de fachada). Eso significa que es imposible conocer las efectivas prestaciones de estos sistemas y las condiciones ambientales que se generan en el interior del edificio. La potencia nominal de pico Wp, de un módulo fotovoltaico identifica la máxima potencia eléctrica que éste puede generar bajo condiciones estándares de medida (STC: irradición 1000 W/m2, 25 °C de temperatura del módulo y distribución espectral, AM 1,5) caracterizando eléctricamente el módulo PV en condiciones específicas con el fin de poder comparar los diferentes módulos y tecnologías. El vatio pico (Wp por su abreviatura en inglés) es la medida de la potencia nominal del módulo PV y no es suficiente para evaluar el comportamiento y producción del panel en términos de vatios hora en las diferentes condiciones de operación, y tampoco permite predecir con convicción la eficiencia y el comportamiento energético de un determinado módulo en condiciones ambientales y de instalación reales. Un adecuado elemento de integración arquitectónica de fachada, por ejemplo, debería tener en cuenta propiedades térmicas y de aislamiento, factores como la transparencia para permitir ganancias solares o un buen control solar si es necesario, aspectos vinculados y dependientes en gran medida de las condiciones climáticas y del nivel de confort requerido en el edificio, lo que implica una necesidad de adaptación a cada contexto específico para obtener el mejor resultado. Sin embargo, la influencia en condiciones reales de operación de las diferentes soluciones fotovoltaicas de integración, en el consumo de energía del edificio no es fácil de evaluar. Los aspectos térmicos del interior del ambiente o de iluminación, al utilizar módulos BIPV semitransparentes por ejemplo, son aún desconocidos. Como se dijo antes, la utilización de componentes de integración arquitectónica fotovoltaicos y el uso de energía renovable ya es un hecho para producir energía limpia, pero también sería importante conocer su posible contribución para mejorar el confort y la salud de los ocupantes del edificio. Aspectos como el confort, la protección o transmisión de luz natural, el aislamiento térmico, el consumo energético o la generación de energía son aspectos que suelen considerarse independientemente, mientras que todos juntos contribuyen, sin embargo, al balance energético global del edificio. Además, la necesidad de dar prioridad a una orientación determinada del edificio, para alcanzar el mayor beneficio de la producción de energía eléctrica o térmica, en el caso de sistemas activos y pasivos, respectivamente, podría hacer estos últimos incompatibles, pero no necesariamente. Se necesita un enfoque holístico que permita arquitectos e ingenieros implementar sistemas tecnológicos que trabajen en sinergia. Se ha planteado por ello un nuevo concepto: "C-BIPV, elemento fotovoltaico consciente integrado", esto significa necesariamente conocer los efectos positivos o negativos (en términos de confort y de energía) en condiciones reales de funcionamiento e instalación. Propósito de la tesis, método y resultados Los sistemas fotovoltaicos integrados en fachada son a menudo soluciones de vidrio fácilmente integrables, ya que por lo general están hechos a medida. Estos componentes BIPV semitransparentes, integrados en el cerramiento proporcionan iluminación natural y también sombra, lo que evita el sobrecalentamiento en los momentos de excesivo calor, aunque como componente estático, asimismo evitan las posibles contribuciones pasivas de ganancias solares en los meses fríos. Además, la temperatura del módulo varía considerablemente en ciertas circunstancias influenciada por la tecnología fotovoltaica instalada, la radiación solar, el sistema de montaje, la tipología de instalación, falta de ventilación, etc. Este factor, puede suponer un aumento adicional de la carga térmica en el edificio, altamente variable y difícil de cuantificar. Se necesitan, en relación con esto, más conocimientos sobre el confort ambiental interior en los edificios que utilizan tecnologías fotovoltaicas integradas, para abrir de ese modo, una nueva perspectiva de la investigación. Con este fin, se ha diseñado, proyectado y construido una instalación de pruebas al aire libre, el BIPV Env-lab "BIPV Test Laboratory", para la caracterización integral de los diferentes módulos semitransparentes BIPV. Se han definido también el método y el protocolo de ensayos de caracterización en el contexto de un edificio y en condiciones climáticas y de funcionamiento reales. Esto ha sido posible una vez evaluado el estado de la técnica y la investigación, los aspectos que influyen en la integración arquitectónica y los diferentes tipos de integración, después de haber examinado los métodos de ensayo para los componentes de construcción y fotovoltaicos, en condiciones de operación utilizadas hasta ahora. El laboratorio de pruebas experimentales, que consiste en dos habitaciones idénticas a escala real, 1:1, ha sido equipado con sensores y todos los sistemas de monitorización gracias a los cuales es posible obtener datos fiables para evaluar las prestaciones térmicas, de iluminación y el rendimiento eléctrico de los módulos fotovoltaicos. Este laboratorio permite el estudio de tres diferentes aspectos que influencian el confort y consumo de energía del edificio: el confort térmico, lumínico, y el rendimiento energético global (demanda/producción de energía) de los módulos BIPV. Conociendo el balance de energía para cada tecnología solar fotovoltaica experimentada, es posible determinar cuál funciona mejor en cada caso específico. Se ha propuesto una metodología teórica para la evaluación de estos parámetros, definidos en esta tesis como índices o indicadores que consideran cuestiones relacionados con el bienestar, la energía y el rendimiento energético global de los componentes BIPV. Esta metodología considera y tiene en cuenta las normas reglamentarias y estándares existentes para cada aspecto, relacionándolos entre sí. Diferentes módulos BIPV de doble vidrio aislante, semitransparentes, representativos de diferentes tecnologías fotovoltaicas (tecnología de silicio monocristalino, m-Si; de capa fina en silicio amorfo unión simple, a-Si y de capa fina en diseleniuro de cobre e indio, CIS) fueron seleccionados para llevar a cabo una serie de pruebas experimentales al objeto de demostrar la validez del método de caracterización propuesto. Como resultado final, se ha desarrollado y generado el Diagrama Caracterización Integral DCI, un sistema gráfico y visual para representar los resultados y gestionar la información, una herramienta operativa útil para la toma de decisiones con respecto a las instalaciones fotovoltaicas. Este diagrama muestra todos los conceptos y parámetros estudiados en relación con los demás y ofrece visualmente toda la información cualitativa y cuantitativa sobre la eficiencia energética de los componentes BIPV, por caracterizarlos de manera integral. ABSTRACT A sustainable design process today is intended to produce high-performance buildings that are energy-efficient, healthy and economically feasible, by wisely using renewable resources to minimize the impact on the environment and to reduce, as much as possible, the energy demand. In the last decade, the reduction of energy needs in buildings has become a top priority. The Directive 2002/91/EC “Energy Performance of Buildings” (and its subsequent updates) established a general regulatory framework’s methodology for calculation of minimum energy requirements. Since then, the aim of fulfilling new directives and protocols has led the energy policies in several countries in a similar direction that is, focusing on the need of increasing energy efficiency in buildings, taking measures to reduce energy consumption, and fostering the use of renewable sources. Zero Energy Buildings or Net Zero Energy Buildings will become a standard in the European building industry and in order to balance energy consumption, buildings, in addition to reduce the end-use consumption should necessarily become selfenergy producers. For this reason, the façade system plays an important role for achieving these energy and environmental goals and Photovoltaic can play a leading role in this challenge. To promote the use of photovoltaic technology in buildings, international research programs encourage and support solutions, which favors the complete integration of photovoltaic devices as an architectural element, the so-called BIPV (Building Integrated Photovoltaic), furthermore facing to next future towards net-zero energy buildings. Therefore, the BIPV module/system becomes a multifunctional building layer, not only physically and functionally “integrated” in the building, but also used as an innovative chance for the building envelope design. It has been found in this study that there is still a lack of useful information about BIPV for architects and designers even though the market is providing more and more interesting solutions, sometimes comparable to the existing traditional building systems. However at the moment, the lack of an harmonized regulation and standardization besides to the non-accuracy in the technical BIPV datasheets (not yet comparable with the same ones available for building materials), makes difficult for a designer to properly evaluate the fesibility of this BIPV components when used as a technological system of the building skin. International organizations are working to establish the most suitable standards and test procedures to check the safety, feasibility and reliability of BIPV systems. Anyway, nowadays, there are no specific rules for a complete characterization and evaluation of a BIPV component according to the European Construction Product Regulation, CPR 305/2011. BIPV products, as building components, must comply with different practical aspects such as mechanical resistance and stability; structural integrity; safety in use; protection against weather (rain, snow, wind, hail); fire and noise: aspects that have become essential requirements in the perspective of more and more environmentally sustainable, healthy, energy efficient and economically affordable products. IEC standards, commonly used in Europe to certify PV modules (IEC 61215 and IEC 61646 respectively crystalline and thin-film ‘Terrestrial PV Modules-Design Qualification and Type Approval’), attest the feasibility and reliability of PV modules for a defined period of time with a limited power decrease. There is also a standard (IEC 61853, ‘Performance Testing and Energy Rating of Terrestrial PV Modules’) still under preparation, whose aim is finding appropriate test procedures and methodologies to calculate the energy yield of PV modules under different climate conditions. Furthermore, the lack of tests in specific conditions of installation (e.g. façade BIPV devices) means that it is difficult knowing the exact effective performance of these systems and the environmental conditions in which the building will operate. The nominal PV power at Standard Test Conditions, STC (1.000 W/m2, 25 °C temperature and AM 1.5) is usually measured in indoor laboratories, and it characterizes the PV module at specific conditions in order to be able to compare different modules and technologies on a first step. The “Watt-peak” is not enough to evaluate the panel performance in terms of Watt-hours of various modules under different operating conditions, and it gives no assurance of being able to predict the energy performance of a certain module at given environmental conditions. A proper BIPV element for façade should take into account thermal and insulation properties, factors as transparency to allow solar gains if possible or a good solar control if necessary, aspects that are linked and high dependent on climate conditions and on the level of comfort to be reached. However, the influence of different façade integrated photovoltaic solutions on the building energy consumption is not easy to assess under real operating conditions. Thermal aspects, indoor temperatures or luminance level that can be expected using building integrated PV (BIPV) modules are not well known. As said before, integrated photovoltaic BIPV components and the use of renewable energy is already a standard for green energy production, but would also be important to know the possible contribution to improve the comfort and health of building occupants. Comfort, light transmission or protection, thermal insulation or thermal/electricity power production are aspects that are usually considered alone, while all together contribute to the building global energy balance. Besides, the need to prioritize a particular building envelope orientation to harvest the most benefit from the electrical or thermal energy production, in the case of active and passive systems respectively might be not compatible, but also not necessary. A holistic approach is needed to enable architects and engineers implementing technological systems working in synergy. A new concept have been suggested: “C-BIPV, conscious integrated BIPV”. BIPV systems have to be “consciously integrated” which means that it is essential to know the positive and negative effects in terms of comfort and energy under real operating conditions. Purpose of the work, method and results The façade-integrated photovoltaic systems are often glass solutions easily integrable, as they usually are custommade. These BIPV semi-transparent components integrated as a window element provides natural lighting and shade that prevents overheating at times of excessive heat, but as static component, likewise avoid the possible solar gains contributions in the cold months. In addition, the temperature of the module varies considerably in certain circumstances influenced by the PV technology installed, solar radiation, mounting system, lack of ventilation, etc. This factor may result in additional heat input in the building highly variable and difficult to quantify. In addition, further insights into the indoor environmental comfort in buildings using integrated photovoltaic technologies are needed to open up thereby, a new research perspective. This research aims to study their behaviour through a series of experiments in order to define the real influence on comfort aspects and on global energy building consumption, as well as, electrical and thermal characteristics of these devices. The final objective was to analyze a whole set of issues that influence the global energy consumption/production in a building using BIPV modules by quantifying the global energy balance and the BIPV system real performances. Other qualitative issues to be studied were comfort aspect (thermal and lighting aspects) and the electrical behaviour of different BIPV technologies for vertical integration, aspects that influence both energy consumption and electricity production. Thus, it will be possible to obtain a comprehensive global characterization of BIPV systems. A specific design of an outdoor test facility, the BIPV Env-lab “BIPV Test Laboratory”, for the integral characterization of different BIPV semi-transparent modules was developed and built. The method and test protocol for the BIPV characterization was also defined in a real building context and weather conditions. This has been possible once assessed the state of the art and research, the aspects that influence the architectural integration and the different possibilities and types of integration for PV and after having examined the test methods for building and photovoltaic components, under operation conditions heretofore used. The test laboratory that consists in two equivalent test rooms (1:1) has a monitoring system in which reliable data of thermal, daylighting and electrical performances can be obtained for the evaluation of PV modules. The experimental set-up facility (testing room) allows studying three different aspects that affect building energy consumption and comfort issues: the thermal indoor comfort, the lighting comfort and the energy performance of BIPV modules tested under real environmental conditions. Knowing the energy balance for each experimented solar technology, it is possible to determine which one performs best. A theoretical methodology has been proposed for evaluating these parameters, as defined in this thesis as indices or indicators, which regard comfort issues, energy and the overall performance of BIPV components. This methodology considers the existing regulatory standards for each aspect, relating them to one another. A set of insulated glass BIPV modules see-through and light-through, representative of different PV technologies (mono-crystalline silicon technology, mc-Si, amorphous silicon thin film single junction, a-Si and copper indium selenide thin film technology CIS) were selected for a series of experimental tests in order to demonstrate the validity of the proposed characterization method. As result, it has been developed and generated the ICD Integral Characterization Diagram, a graphic and visual system to represent the results and manage information, a useful operational tool for decision-making regarding to photovoltaic installations. This diagram shows all concepts and parameters studied in relation to each other and visually provides access to all the results obtained during the experimental phase to make available all the qualitative and quantitative information on the energy performance of the BIPV components by characterizing them in a comprehensive way.

Face, content, and construct validity of the EndoViS training system for objective assessment of psychomotor skills of laparoscopic surgeons

Background The aim of this study is to present face, content, and constructs validity of the endoscopic orthogonal video system (EndoViS) training system and determines its efficiency as a training and objective assessment tool of the surgeons’ psychomotor skills. Methods Thirty-five surgeons and medical students participated in this study: 11 medical students, 19 residents, and 5 experts. All participants performed four basic skill tasks using conventional laparoscopic instruments and EndoViS training system. Subsequently, participants filled out a questionnaire regarding the design, realism, overall functionality, and its capabilities to train hand–eye coordination and depth perception, rated on a 5-point Likert scale. Motion data of the instruments were obtained by means of two webcams built into a laparoscopic physical trainer. To identify the surgical instruments in the images, colored markers were placed in each instrument. Thirteen motion-related metrics were used to assess laparoscopic performance of the participants. Statistical analysis of performance was made between novice, intermediate, and expert groups. Internal consistency of all metrics was analyzed with Cronbach’s α test. Results Overall scores about features of the EndoViS system were positives. Participants agreed with the usefulness of tasks and the training capacities of EndoViS system (score >4). Results presented significant differences in the execution of three skill tasks performed by participants. Seven metrics showed construct validity for assessment of performance with high consistency levels. Conclusions EndoViS training system has been successfully validated. Results showed that EndoViS was able to differentiate between participants of varying laparoscopic experience. This simulator is a useful and effective tool to objectively assess laparoscopic psychomotor skills of the surgeons.

GESTÃO DO CONHECIMENTO: UM ESTUDO SOBRE A RELAÇÃO ENTRE A LIDERANÇA TRANSFORMACIONAL, A CONVERSÃO DO CONHECIMENTO E A EFICÁCIA ORGANIZACIONAL

Este estudo teve como objetivo principal analisar a relação entre a Liderança Transformacional, a Conversão do Conhecimento e a Eficácia Organizacional. Foram considerados como pressupostos teóricos conceitos consolidados sobre os temas desta relação, além de recentes pesquisas já realizadas em outros países e contextos organizacionais. Com base nisto identificou-se potencial estudo de um modelo que relacionasse estes três conceitos. Para tal considera-se que as organizações que buscam atingir Vantagem Competitiva e incorporam a Knowledge-Based View possam conquistar diferenciação frente a seus concorrentes. Nesse contexto o conhecimento ganha maior destaque e papel protagonista nestas organizações. Dessa forma criar conhecimento através de seus colaboradores, passa a ser um dos desafios dessas organizações ao passo que sugere melhoria de seus indicadores Econômicos, Sociais, Sistêmicos e Políticos, o que se define por Eficácia Organizacional. Portanto os modos de conversão do conhecimento nas organizações, demonstram relevância, uma vez que se cria e se converte conhecimentos através da interação entre o conhecimento existente de seus colaboradores. Essa conversão do conhecimento ou modelo SECI possui quatro modos que são a Socialização, Externalização, Combinação e Internalização. Nessa perspectiva a liderança nas organizações apresenta-se como um elemento capaz de influenciar seus colaboradores, propiciando maior dinâmica ao modelo SECI de conversão do conhecimento. Se identifica então na liderança do tipo Transformacional, características que possam influenciar colaboradores e entende-se que esta relação entre a Liderança Transformacional e a Conversão do Conhecimento possa ter influência positiva nos indicadores da Eficácia Organizacional. Dessa forma esta pesquisa buscou analisar um modelo que explorasse essa relação entre a liderança do tipo Transformacional, a Conversão do Conhecimento (SECI) e a Eficácia Organizacional. Esta pesquisa teve o caráter quantitativo com coleta de dados através do método survey, obtendo um total de 230 respondentes válidos de diferentes organizações. O instrumento de coleta de dados foi composto por afirmativas relativas ao modelo de relação pesquisado com um total de 44 itens. O perfil de respondentes concentrou-se entre 30 e 39 anos de idade, com a predominância de organizações privadas e de departamentos de TI/Telecom, Docência e Recursos Humanos respectivamente. O tratamento dos dados foi através da Análise Fatorial Exploratória e Modelagem de Equações Estruturais via Partial Least Square Path Modeling (PLS-PM). Como resultado da análise desta pesquisa, as hipóteses puderam ser confirmadas, concluindo que a Liderança Transformacional apresenta influência positiva nos modos de Conversão do Conhecimento e que; a Conversão do Conhecimento influencia positivamente na Eficácia Organizacional. Ainda, concluiu-se que a percepção entre os respondentes não apresenta resultado diferente sobre o modelo desta pesquisa entre quem possui ou não função de liderança.

Multi-component assessment of chronic obstructive pulmonary disease : an evaluation of the ADO and DOSE indices and the global obstructive lung disease categories in international primary care data sets

Funding The International Primary Care Respiratory Group (IPCRG) provided funding for this research project as an UNLOCK group study for which the funding was obtained through an unrestricted grant by Novartis AG, Basel, Switzerland. The latter funders had no role in study design, data collection and analysis, decision to publish or preparation of the manuscript. Database access for the OPCRD was provided by the Respiratory Effectiveness Group (REG) and Research in Real Life; the OPCRD statistical analysis was funded by REG. The Bocholtz Study was funded by PICASSO for COPD, an initiative of Boehringer Ingelheim, Pfizer and the Caphri Research Institute, Maastricht University, The Netherlands.

The TIGR Gene Indices: analysis of gene transcript sequences in highly sampled eukaryotic species

While genome sequencing projects are advancing rapidly, EST sequencing and analysis remains a primary research tool for the identification and categorization of gene sequences in a wide variety of species and an important resource for annotation of genomic sequence. The TIGR Gene Indices (http://www.tigr.org/tdb/tgi.shtml) are a collection of species-specific databases that use a highly refined protocol to analyze EST sequences in an attempt to identify the genes represented by that data and to provide additional information regarding those genes. Gene Indices are constructed by first clustering, then assembling EST and annotated gene sequences from GenBank for the targeted species. This process produces a set of unique, high-fidelity virtual transcripts, or Tentative Consensus (TC) sequences. The TC sequences can be used to provide putative genes with functional annotation, to link the transcripts to mapping and genomic sequence data, to provide links between orthologous and paralogous genes and as a resource for comparative sequence analysis.

The 12-Item General Health Questionnaire (GHQ-12): Reliability,external validity and factor structure in the Spanish population

The purpose of this study was to analyze the internal consistency and the external and structure validity of the 12-Item General Health Questionnaire (GHQ-12) in the Spanish general population. A stratified sample of 1001 subjects, ages between 25 and 65 years, taken from the general Spanish population was employed. The GHQ-12 and the Inventory of Situations and Responses of Anxiety-ISRA were administered. A Cronbach’s alpha of .76 (Standardized Alpha: .78) and a 3-factor structure (with oblique rotation and maximum likelihood procedure) were obtained. External validity of Factor I (Successful Coping) with the ISRA is very robust (.82; Factor II, .70; Factor III, .75). The GHQ-12 shows adequate reliability and validity in the Spanish population. Therefore, the GHQ-12 can be used with efficacy to assess people’s overall psychological well-being and to detect non-psychotic psychiatric problems. Additionally, our results confirm that the GHQ-12 can best be thought of as a multidimensional scale that assesses several distinct aspects of distress, rather than just a unitary screening measure.

Histoire et archéologie de la transition en al‐Andalus: les indices matériels de l’islamisation à Tudmīr

El objetivo de este trabajo es el reconocimiento material de la islamización en la Cora o provincia de Tudmīr, a partir de la investigación arqueológica. Se realiza un balance crítico de una década de investigaciones individuales y colectivas, presentando las últimas novedades sobre el poblamiento y las formas de implantación territorial en el sudeste de al-Andalus. La arqueología, entendida como una de las fuentes históricas más innovadoras en la discusión sobre la formación de al-Andalus, se convierte en un valioso instrumento de caracterización material de la sociedad islámica y permite reconocer los indicadores sociales (urbanismo y espacios domésticos), culturales (islamización religiosa y arabización lingüística) y cronológicos (moneda, cerámica, etc.) del proceso de islamización.

A methodology for applying Taxonomic Sufficiency and benthic biotic indices in two Mediterranean areas

Biotic indices have been developed to summarise information provided by benthic macroinvertebrates, but their use can require specialized taxonomic expertise as well as a time-consuming operation. Using high taxonomic level in biotic indices reduces sampling processing time but should be considered with caution, since assigning tolerance level to high taxonomic levels may cause uncertainty. A methodology for family level tolerance categorization based on the affinity of each family with disturbed or undisturbed conditions was employed. This family tolerance classification approach was tested in two different areas from Mediterranean Sea affected by sewage discharges. Biotic indices employed at family level responded correctly to sewage presence. However, in areas with different communities among stations and high diversity of species within each family, assigning the same tolerance level to a whole family could imply mistakes. Thus, use of high taxonomic level in biotic indices should be only restricted to areas where homogeneous community is presented and families across sites have similar species composition.

Diagnostic validity of clinical signs associated with a large exophoria at near

Purpose. To analyze the diagnostic validity of accommodative and binocular tests in a sample of patients with a large near exophoria with moderate to severe symptoms. Methods. Two groups of patients between 19 and 35 years were recruited from a university clinic: 33 subjects with large exophoria at near vision and moderate or high visual discomfort and 33 patients with normal heterophoria and low visual discomfort. Visual discomfort was defined using the Conlon survey. A refractive exam and an exhaustive evaluation of accommodation and vergence were assessed. Diagnostic validity by means of receiver operator characteristic (ROC) curves, sensitivity (S), specificity (Sp), and positive and negative likelihood ratios (LR+, LR−) were assessed. This analysis was also carried out considering multiple tests as serial testing strategy. Results. ROC analysis showed the best diagnostic accuracy for receded near point of convergence (NPC) recovery (area = 0.929) and binocular accommodative facility (BAF) (area = 0.886). Using the cut-offs obtained with ROC analysis, the best diagnostic validity was obtained for the combination of NPC recovery and BAF (S  =  0.77, Sp = 1, LR+ = value tending to infinity, LR− = 0.23) and the combination of NPC break and recovery with BAF (S  =  0.73, Sp = 1, LR+ = tending to infinity, LR− = 0.27). Conclusions. NPC and BAF tests were the tests with the best diagnostic accuracy for subjects with large near exophoria and moderate to severe symptoms.