MERCOSUL: avanços e desafios da integração

Incluye Bibliografía

Influência da contaminação da dentina por cimentos temporários na resistência da união de sistemas adesivos

Objective: The aim of this study was to assess the bond strength of adhesive systems to dentin contaminated by temporary cements with or without eugenol. Method: Flat dentin surfaces were obtained from twenty-four human third molars. With exception of the control group (n=8), the surfaces were covered with Interim Restorative Material (Caulk Dentsplay, Milford, DE, USA) or Cavit (3M ESPE, St. Paul, MN, USA) and kept in an oven at 37°C for seven days. After removing the cements, the adhesive systems Adper Single Bond (3M ESPE, St. Paul, MN, USA) or Clearfil SE Bond (Kuraray Co. Ltd., Osaka, Japan) were applied in accordance with the manufacturers' recommendations, and then the crowns were constructed in of resin composite. The teeth were sectioned into specimens with a cross-sectional bond area of 0.81mm2, which were submitted to microtensile testing in a mechanical test machine at an actuator speed of 0.5mm/min. The data were analyzed by t- and ANOVA tests, complemented by Tukey tests (α=0.05). Results: For Adper Single Bond (3M ESPE, St. Paul, MN, USA), bond strength did not differ statistically (p>0.05) for all the experimental conditions. For Clearfil SE Bond (Kuraray Co. Ltd., Osaka, Japan), only the Interim Restorative Material (Caulk Dentsplay, Milford, DE, USA) Group showed significantly lower bond strength (30.1 ± 13.8 MPa) in comparison with the other groups; control (38.9 ± 13.5 MPa) and Cavit (3M ESPE, St. Paul, MN, USA) (42.1 ± 11.0 MPa), which showed no significant difference between them. Conclusion: It was concluded that the previous covering of dentin with temporary cement containing eugenol had a deleterious effect on the adhesive performance of the self-etching system only.

Espaços ibero-americanos: comércio e investimento

Incluye Bibliografía

Recursos naturais na União das Nações Sul-americanas (UNASUL): Situação e tendências para uma agenda de desenvolvimento regional

Incluye Bibliografía

O novo cenário laboral latino-americano: regulaçao, proteçao e políticas ativas nos mercados de trabalho

Prólogo de Alicia Bárcena

Compras governamentais: políticas e procedimentos na Organização Mundial de Comércio, União Européia, NAFTA, Estados Unidos e Brasil

Incluye Bibliografía

Influência de diferentes sistemas adesivos na resistência de união de pinos de fibra à dentina intrarradicular

Objective: To evaluate the influence of three adhesive systems on the bond strength of fiber post luted to root dentine. The hypothesis was that the bond strength is influenced by the adhesive system. Method: The canals of thirty single-root bovine roots (16mm in length) were prepared using the preparation drill (FGM) until 12mm. 14 mm of each root was embedded with acrylic resin and the specimens were allocated into three groups (n=10), considering the factor adhesive (3 levels): Gr1- Scotchbond Multipurpose Plus (3M ESPE), Gr2- One Step (Bisco) and Gr3- Excite DSC (Ivoclar Vivadent). The adhesive systems were applied using a microbrush, according to the manufacture's recommendations. The fiber posts (White Post DC, FGM) were luted with dual resin cement (All-Cem,FGM). After, the cores with composite resin (Llis, FGM) were made and each set of root/post/core was submitted to the mechanical cycling (Erios, Brazil) (10 6 cycles, 84N, 4 Hz, inclination of 45 o, 37 oC, water). Each specimen was cut in 4 samples (1.8mm in thickness), which were submitted to the push-out test in a universal testing machine (ServoPulser - Shimadzu) (50Kgf, 1mm/min). The data (MPa) were analyzed using ANOVA (1-way) and Tukey test (5%). Results: The factor adhesive (P=0.00352) influenced the bond strength significantly (ANOVA). Gr1 (6.8±3.8 MPa) a presented higher bond strength values than Gr2 (3.1±1.5 MPa) b and similar to Gr3 (4.4±3.3) a,b. Moreover, Gr3 and Gr2 were similar between them (Tukey). The hypothesis was accepted. Conclusion: Based on the results it was concluded that chemical and dual polymerization adhesive system should be used for the adhesive luting fiber post procedures.

Primeiro registro de Harpia harpyja para o bioma Pantanal, com dados sobre atividade reprodutiva

The first reliable encounter of the Harpy Eagle Harpia harpyja in the Pantanal floodplains is reported, with information on its breeding activity in the region, as well as some prey. A nest was found in August 2009, located in Barão de Melgaço County, northern portion of the Pantanal, with a 60-90-day-old eaglet. After a windy storm on August 30, the nest fell, causing the death of the nestling. In March 2010 another nest was located about 2.6 km distant from the first. We emphasize the importance of this record, and the need for a monitoring program to evaluate the true status of the Harpy Eagle in the northern portion of the Pantanal and nearby areas.

Primeiro relato de atividade patogênica de Hirsutella thompsonii (Fischer) sobre o ácaro-da-erinose-da-lichia Aceria litchii (Keifer)

The litchi erineum mite, Aceria litchii (Keifer) is found in all producing regions attacking leaves and flowers of litchi plants. The mite attack young leaves and causes the erinea on leaf surface, which later become brown galls with velvety appearance. Severe attacks can cause leaf drop and destruction of branches end directly production affecting. In 2009 year it was registered a heavy infestation of the pest on litchi plants (Litchi chinensis Sonn.) in the municipality of Casa Branca, São Paulo, Brazil (2127'O; 4702'S; 679 m altitude). In June, many galls caused by mite infestation showed a mycelium of white coloration and many eriophyid dead. The fungus was identified as Hirsutella thompsonii (Fischer). The results suggest that galls may facilitate the fungus development and its permanence on the plants. Thus, the possibility of mite biological control with H. thompsonii should be investigated.

Primeiro registro de Molossus coibensis (Chiroptera: Molossidae) na Amazônia Brasileira

This study reports on the occurrence of Molossus coibensis J. A. Allen, 1904, in the Brazilian Amazon and the second record of this species from Brazil. It also presents a comparative analysis with other two small-bodied Molossus species that occur in Brazil: M. molossus (Pallas, 1766) and M. aztecus Saussure, 1860. The report is based on 8 females captured in urban areas of the city of Bragança, in the northern Brazilian state of Pará. Morphometric data and the qualitative comparison of morphological features permitted the identification of the specimens as M. coibensis, hitherto known only in Tapirapoan, in the southwestern state of Mato Grosso, west-central Brazil. © SAREM, 2013.

Aplicação de escória de aciaria e calcário no solo e desenvolvimento do primeiro ciclo da grama bermuda

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A interação professor-aluno nas atividades de escrita: um estudo em salas de primeiro ano do ensino fundamental

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Extração de segmentos de rodovias em imagens de resoluções variadas usando o princípio de bordas paralelas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Teatro União e Olho Vivo: cultura tradicional e arte popular

Pós-graduação em Artes - IA

Caminhos da cerâmica em Cunha: paneleiras, olarias e ateliês, elementos importantes na formação do histórico ceramista da cidade

Pós-graduação em Artes - IA