PANELS: Stata module to count panels and apply a command to panel units

panels provides a quick way to count the number of panels (groups) in a dataset and display some basic information about the sizes of the panels. Furthermore, -panels- can be used as a prefix command to other Stata commands to apply them to panel units instead of individual observations. This is useful, for example, if you want to compute frequency distributions or summary statistics for panel characteristics.

Export platform FDI and firm heterogeneity

This paper investigates theoretically and empirically firms' productivity ranking among traditional horizontal foreign direct investment (HFDI), pure platform FDI (PFDI), and complex platform FDI (CFDI). Using data on Japanese outward FDI, we define firms conducting HFDI or PFDI as those Japanese firms that maintain production affiliates only in the U.S. or Mexico, respectively. The firms for CFDI are defined as having production affiliates in both the U.S. and Mexico. The theoretical illustration shows that the CFDI firms should have the highest productivity when trade costs between the U.S. and Mexico are low. By carefully disentangling firms' self-selection effects from learning-by-investing effects, we find some evidence consistent with this hypothesis for a period of relatively low trade costs. Our results indicate the importance of trade costs in developing countries with neighboring markets in attracting foreign investment by highly productive multinational firms.

Export platform foreign direct investment : theory and evidence

This paper proposes a model that accounts for “export platform” FDI – a form of FDI that is common in the data but rarely discussed in the theoretical literature. Unlike the previous literature, this paper’s theory nests all the typical modes of supply, including exports, horizontal and vertical FDI, horizontal and vertical export platform FDI. The theory yields the testable hypothesis that a decrease in either inter-regional or intra-regional trade costs induces firms to choose export platform FDI. The empirical analysis provides descriptive statistics which point to large proportions of third country exports of US FDI, and an econometric analysis, whose results are in line with the model’s predictions. The last section suggests policy implications for nations seeking to attract FDI.

Neutrality in the choice of number of firms or level of fixed costs in calibrating an Armington-Krugman-Melitz encompassing module for applied general equilibrium models

This paper shows how an Armington-Krugman-Melitz encompassing module based on Dixon and Rimmer (2012) can be calibrated, and clarifies the choice of initial levels for two kinds of number of firms, or parameter values for two kinds of fixed costs, that enter a Melitz-type specification can be set freely to any preferred value, just as the cases we derive quantities from given value data assuming some of the initial prices to be unity. In consequence, only one kind of additional information, which is on the shape parameter related to productivity, just is required in order to incorporate Melitz-type monopolistic competition and heterogeneous firms into a standard applied general equilibrium model. To be a Krugman-type, nothing is needed. This enables model builders in applied economics to fully enjoy the featured properties of the theoretical models invented by Krugman (1980) and Melitz (2003) in practical policy simulations at low cost.

Behavioral characteristics of applied general equilibrium models with an Armington-Krugman-Melitz encompassing module

This paper explore how simulation results change with different choice of trade specification, and the strength of preference for traded variety by economic agent differs, utilizing two types of three-region, three-sector AGE model that includes the Armington-Krugman-Melitz Encompassing module based on Dixon and Rimmer (2012). Simulation experiments reveal that: (1) the Melitz-type specification does not always enhance effectiveness of a certain policy change more than the one obtained with the Krugman-type, especially when economic agents' preference for traded variety is not so strong; (2) there are likely to be points where the volumes of effects obtained with the Melitz-type exceed the ones with the Krugman-type; and (3) the preference of the producers, those who are in the sectors that exhibit increasing returns to scale, for traded variety might be the engine of explosive effects as suggested by Fujita, et al. (2000).

R&D on crystalline silicon technology: From metallurgical silicon to the PV module

Founded by Antonio Luque in 1979 Personnel: Personnel: 6464 full full-time time staff (19 professors staff (19 professors, 44 PhD PhD researchers 28 PhD students 13 researchers, 28 PhD students, 13 administrative and maintenance staff), 19 “part time” (11 “external PhD students”, 8 master students) Objective: Objective: Contribute to the deployment of Photovoltaic Solar Electricity through R&D& Contribute to the deployment of Photovoltaic Solar Electricity through R&D&i

An Experimental Platform for large-scale research facing FI-IoT scenarios

Providing experimental facilities for the Internet of Things (IoT) world is of paramount importance to materialise the Future Internet (FI) vision. The level of maturity achieved at the networking level in Sensor and Actuator networks (SAN) justifies the increasing demand on the research community to shift IoT testbed facilities from the network to the service and information management areas. In this paper we present an Experimental Platform fulfilling these needs by: integrating heterogeneous SAN infrastructures in a homogeneous way; providing mechanisms to handle information, and facilitating the development of experimental services. It has already been used to deploy applications in three different field trials: smart metering, smart places and environmental monitoring and it will be one of the components over which the SmartSantander project, that targets a large-scale IoT experimental facility, will rely on

Real-time reliability test for a CPV module based on a power degradation model

Models based on degradation are powerful and useful tools to evaluate the reliability of those devices in which failure happens because of degradation in the performance parameters. This paper presents a procedure for assessing the reliability of concentrator photovoltaic (CPV) modules operating outdoors in real-time conditions. With this model, the main reliability functions are predicted. This model has been applied to a real case with a module composed of GaAs single-junction solar cells and total internal reflection (TIR) optics

A User Centered Design Approach for Patient Interfaces to a Diabetes IT Platform

Improving patient self-management can have a greater impact than improving any clinical treatment (WHO). We propose here a systematic and comprehensive user centered design approach for delivering a technological platform for diabetes disease management. The system was developed under the METABO research project framework, involving patients from 3 different clinical centers in Parma, Modena and Madrid.

ITER fast plan system controlle prototype based on PXI platform

Presentación de una ponencia invitada en el 4th Annual Pan-European Big Physics Symposium

ITER fast plant system controller prototype based on PXIe platform

The ITER CODAC design identifies slow and fast plant system controllers (PSC). The gast OSCs are based on embedded technologies, permit sampling rates greater than 1 KHz, meet stringent real-time requirements, and will be devoted to data acquisition tasks and control purposes. CIEMAT and UPM have implemented a prototype of a fast PSC based on commercial off-the-shelf (COTS) technologies with PXI hardware and software based on EPICS

Cost and energy efficient reconfigurable embedded platform using Spartan-6 FPGAs

Modern FPGAs with run-time reconfiguration allow the implementation of complex systems offering both the flexibility of software-based solutions combined with the performance of hardware. This combination of characteristics, together with the development of new specific methodologies, make feasible to reach new points of the system design space, and make embedded systems built on these platforms acquire more and more importance. However, the practical exploitation of this technique in fields that traditionally have relied on resource restricted embedded systems, is mainly limited by strict power consumption requirements, the cost and the high dependence of DPR techniques with the specific features of the device technology underneath. In this work, we tackle the previously reported problems, designing a reconfigurable platform based on the low-cost and low-power consuming Spartan-6 FPGA family. The full process to develop the platform will be detailed in the paper from scratch. In addition, the implementation of the reconfiguration mechanism, including two profiles, is reported. The first profile is a low-area and low-speed reconfiguration engine based mainly on software functions running on the embedded processor, while the other one is a hardware version of the same engine, implemented in the FPGA logic. This reconfiguration hardware block has been originally designed to the Virtex-5 family, and its porting process will be also described in this work, facing the interoperability problem among different families.

ITER Fast Plant System Controller Prototype Based on Commercial PXI Platform

The ITER CODAC design identifies slow and fast plant system controllers (PSC). The gast OSCs are based on embedded technologies, permit sampling rates greater than 1 KHz, meet stringent real-time requirements, and will be devoted to data acquisition tasks and control purposes. CIEMAT and UPM have implemented a prototype of a fast PSC based on commercial off-the-shelf (COTS) technologies with PXI hardware and software based on EPICS

Stability and Transient Performance Assessment in a COTS-Module-Based Distributed DC/DC System

This paper introduces a method to analyze and predict stability and transient performance of a distributed system where COTS (Commercial-off-the-shelf) modules share an input filter. The presented procedure is based on the measured data from the input and output terminals of the power modules. The required information for the analysis is obtained by performing frequency response measurements for each converter. This attained data is utilized to compute special transfer functions, which partly determine the source and load interactions within the converters. The system level dynamic description is constructed based on the measured and computed transfer functions introducing cross-coupling mechanisms within the system. System stability can be studied based on the well-known impedance- related minor-loop gain at an arbitrary interface within the system.

eMathTeacher Platform Suite

La idea inicial de este proyecto surge de la necesidad de desarrollar una herramienta software que ayudase a estudiantes de un curso de iniciación de álgebra lineal a adquirir los conceptos expuestos en el curso mediante la asistencia de cálculos y la representación visual de conceptos e ideas. Algunas de las características o funcionalidades que debería cumplir la herramienta serían: cálculo simbólico, representación simbólica, interfaz gráfico interactivo (point-and-click para realizar operaciones y cálculos, inserción de elementos gráficos mediante drag-and-drop desde una paleta de elementos, representación visual esquemática, representación gráfica 2D y 3D...), persistencia del modelo de datos, etc. Esta fase de un proyecto puede definirse como el – qué –. El siguiente paso o fase del proyecto trata del diseño del proyecto o el – cómo –. Cómo realizar el cálculo numérico, cómo representar símbolos matemáticos en pantalla, cómo crear una paleta de elementos. . . Seguramente existen bibliotecas o APIs de programación para realizar todas estas tareas, sin embargo, su utilización exige al programador tiempo de aprendizaje y el diseño de integración de las diferentes bibliotecas (compatibilidad de versiones, mecanismos de comunicación entre ellas, configuración, etc.). Lo primero puede resolverse fácilmente dedicando tiempo de estudio a la documentación, pero ya implica tiempo. Lo segundo implica además tener que tomar decisiones sobre cómo realizar la integración, no es trivial llegar a dibujar en pantalla, mediante una API de visualización gráfica, una matriz resultado de realizar ciertas operaciones mediante un API de cálculo de álgebra lineal. Existen varias bibliotecas de cálculo de álgebra lineal en las que apoyarse para realizar cálculos. Así pues, es fácil encontrar una biblioteca o API con funciones para realizar operaciones con matrices. Lo que no resulta tan sencillo es encontrar un API que permita definir al programador los mecanismos para representar la matriz en pantalla o para que el usuario introduzca los valores de la matriz. Es en estas últimas tareas en las que el programador se ve obligado a dedicar la mayor parte del tiempo de desarrollo. El resultado de este proyecto supone una gran simplificación de esta segunda fase, la parte del – cómo –, estableciendo una plataforma sobre la que futuros desarrollos puedan basarse para obtener resultados de alta calidad sin tener que preocuparse de las tareas ajenas a la lógica del programa.