Systems of aerial spraying for soybean rust control

The soybean rust caused by Phakopsora pachyrhizi is considered the main soybean disease and consequently the appropriate selection and the use of spraying equipment are vital for its control. The aim of this study was to evaluate the performance of aerial application equipment for soybean rust control. It was used: Micronair AU 5000 at 10 L ha-1 (with oil) and at 20 L ha-1 (without oil); Stol ARD atomizer at 10 and 20 L ha-1 (both with oil) and Spectrum (electrostatic) at 10 L ha-1 (without oil). The adjuvant was cotton oil (1.0 L ha-1) with emulsifier (BR 455) at 0.025 L ha-1. The field trial was set up at the 3rd fungicide application, when f four replications of each treatment. There were no statistical differences among treatments related to fungicide deposits by at a Confidence Interval of 95%. It was observed that the best results were obtained with Micronair (10 L ha-1 with oil), Stol (20 L ha-1 with oil) and electrostatic system at 10 L ha-1 with the lowest relative humidity (64%).

Mathematical analysis of maximum power generated by photovoltaic systems and fitting curves for standard test conditions

The rural electrification is characterized by geographical dispersion of the population, low consumption, high investment by consumers and high cost. Moreover, solar radiation constitutes an inexhaustible source of energy and in its conversion into electricity photovoltaic panels are used. In this study, equations were adjusted to field conditions presented by the manufacturer for current and power of small photovoltaic systems. The mathematical analysis was performed on the photovoltaic rural system I-100 from ISOFOTON, with power 300 Wp, located at the Experimental Farm Lageado of FCA/UNESP. For the development of such equations, the circuitry of photovoltaic cells has been studied to apply iterative numerical methods for the determination of electrical parameters and possible errors in the appropriate equations in the literature to reality. Therefore, a simulation of a photovoltaic panel was proposed through mathematical equations that were adjusted according to the data of local radiation. The results have presented equations that provide real answers to the user and may assist in the design of these systems, once calculated that the maximum power limit ensures a supply of energy generated. This real sizing helps establishing the possible applications of solar energy to the rural producer and informing the real possibilities of generating electricity from the sun.

Technical evaluation of artificial ligthing systems for broiler houses

The spatial distribution of illuminance and the electric consumption of artificial lighting system is one of the main problems related to broiler production. Therefore, the aim of this study was to evaluate the spatial distribution of luminance level and energy efficiency of different lighting systems for broiler houses. Six types of lamps were tested in two different configurations to find the minimum illuminance of 20 and 5 lux. The tested lamps were incandescent (IL) 100 W, compact fluorescent (CFL) 34 W, mixed (ML) 160 W, sodium vapor (SVL) 70 W, T8 fluorescent tube (T8 FTL) 40 W and T5 fluorescent tube (T5 FTL) 28 W. The first four were evaluated with and without reflective light fixture and the latter two without light fixture. It was observed that the tested system with light fixtures negatively affected the spatial distribution of illuminance inside the house. The systems composed by IL and ML without light fixture led to better results in meeting the minimum illuminance of 20 lux and 5 lux, respectively. T5 FTL presented the lowest energy demand.

Physiological evaluation of heat stress in gestating sows under different housing systems in bedding and concrete floor

The purpose of this paper was to observe the use of bedding (wood shavings) in physiological variables that indicate thermal stress in gestating sows. The experiment was conducted in order to evaluate the effect of two types of floor (concrete and wood shavings). Worse microclimatic conditions were observed in bedding systems (P<0.05), with an increase in temperature and enthalpy of 1.14 ºC and 2.37 kJ.kg dry air-1, respectively. The floor temperature at the dirty area was higher in the bedding presence in comparison to its absence. In spite of the worse microclimatic conditions in the bedding, the rectal temperature did not differ significantly (P>0.05) but the skin surface temperature was higher in the bedding systems. The same occurred with the respiratory rates. The physical characteristics of the floor material influenced the rate of heat loss by conductance. Estimated values were 35.04 and 7.99 W m-2 for the conductive heat loss between the animal and floor for treatments with or without bedding, respectively. The use of bedding in sow rearing has a negative impact on microclimatic conditions, what implies in thermoregulatory damages.

Removal of nitrogen, phosphorus, copper and zinc from swine breeding waste water by bermudagrass and cattail in constructed wetland systems

This work aimed to study the agronomic performance and capacity of nutrient removal by bermudagrass (Cynodon spp.) and cattail (Typha sp.) when grown in constructed wetlands systems (CWSs) of vertical and horizontal flow, respectively, used in the post-treatment of swine breeding wastewater (ARS). The average yield of dry matter (DM) of bermudagrass in sections of 60-day interval ranged from 14 to 43 t ha-1, while the cultivated cattail produced in a single cut after 200 days of cultivation between 45 and 67 t ha-1 of DM. Bermudagrass extracted up to 17.65 kg ha-1 d-1 of nitrogen, 1.76 kg ha-1 d-1 of phosphorus, 6.67 g ha-1 d-1 of copper and 54.75 g ha-1 d-1 of zinc. Cattail extracted up to 5.10 kg ha-1 d-1 of nitrogen, 1.07 kg ha-1 d-1 of phosphorus, 1.41 g ha-1 d-1 of copper and 16.04 g ha-1 d-1 of zinc. Cattail and bermudagrass were able to remove, respectively, 5.0 and 4.6% of the nitrogen and 11.2 and 5.4% of the phosphorus applied via ARS, being less efficient in extracting N and P when the initial intake of these nutrients is evaluated.

Corn productivity in function of surface application of lime in differents management systems and cultural preparation

The evaluation of technologies employed at the agricultural production system such as crop rotation and soil preparation, both associated with crop-livestock integration, is crucial. Therefore, the aim of the present study was to evaluate the incorporation of lime for three no-tillage systems and cultural managements in system of crop-livestock integration, with emphasis on corn grain yield. The experiment was conducted from January 2003 to April 2005 at Selvíria city, MS, in Dystroferric Red Latosol, clay texture. The experimental design was randomized blocks with split plots consisted of three main treatments, aimed the soil physics conditioning and the incorporation of lime: PD - No-no-tillage; CM - minimum no-tillage, and PC - conventional no-tillage; and of two secondary treatments related to the management: rotation and crop succession, with four replications. Data on agronomic traits of maize were analyzed: plant height, stem diameter, height of the first spike insertion, 100 grains weight and grain yield. The results showed that the maize produced under the system of crop-livestock integration is quite feasible, showing that grain yields are comparable to averages in the region and the different soil physical conditioning and incorporation of lime did not influence the corn yield as well as the cultural managements, rotation and succession, did not affect the maize crop behavior after two years of cultivation.

Spraying systems and traveling speed in the deposit and spectrum of droplets in cotton plant

ABSTRACT Tractor traveling speed can influence the quality of spraying depending on the application technology used. This study aimed to evaluate the droplet spectrum, the deposition and uniformity of spray distribution with different spraying systems and traveling speeds of a self-propelled sprayer in two phenological stages of the cotton plant (B9 and F13). The experimental design was randomized blocks and treatments were three spraying techniques: common flat spray tips; tilted flat jet with air induction, at 120 L ha-1; and rotary atomizer disk, 20 L ha-1, combined with four traveling speeds: 12, 15, 18 and 25 km h-1, with four replications. Spraying deposition was evaluated for both leaf surfaces from the cotton plant apex and base (stage B9) and middle part of the plant (stage F13) with a cupric marker. A laser particle analyzer also assessed the droplet spectrum. The centrifugal power spray system produces more homogeneous droplet spectrum and increased penetration of droplets into the canopy in both phenological stages. Variation on the operating conditions necessary for increased traveling speed negatively influences the pattern of spraying deposits.

Technical-economic analysis of different lighting systems for broiler poultry

ABSTRACT Broiler poultry is highly dependent on artificial lightening. Power consumption costs of artificial lighting systems is the second largest expense related to broiler industry, second only to feed expenses. Therefore, the current study focused to analyze technical and economic feasibility of replacing incandescent lamps already used in aviaries with other lamp types. Costs related to power consumption, implementation and maintenance of the lighting systems were evaluated with the aid of financial mathematics using net present value, return over investment and payback. Systems composed of six lamp types were analyzed in two different configurations to meet the minimum illuminance of 5 and 20 lux and for use in conventional sheds and dark house. The lamps tested were incandescent (LI) of 100 W, compact fluorescent (CFL) of 34 W, mixed (ML) 160 W sodium vapor (SVL) of 70 W, tubular fluorescent T8 (TFL T8) of 40 W and tubular fluorescent T5 (TFL T5) of 28 W. For the systems tested, it was found that the tubular fluorescent lamps T8 and T5 showed the best results of technical and economic feasibility.

Effect of different substrates in aquaponic lettuce production associated with intensive tilapia farming with water recirculation systems

ABSTRACT The integration of fish farming in intensive system and plant production, called "aquaponics" is practiced successfully in countries like the USA, Australia and Europe. In Brazil, this integration has attracted the attention of researchers and producers. In this context, the aim of this study was to evaluate the effect of two substrates (crushed stone number 3, CS III and flexible polyurethane foam, FPF) on the production of aquaponic lettuce, moreover, to show that the residual water from intensive tilapia production provides sufficient qualitative characteristics for competitive production of lettuce without adding commercial fertilizers. The treatment in which FPF was used provided higher concentrations of macro and micronutrients in the shoots, higher production of fresh matter of shoots (95.48 g plant-1) and a larger number of leaves (14.90) relative to CS III. These results were attributed to the lower post-transplanting stress and the higher water retention time provided by the FPF. The residual water from tilapia intensive farming can provide sufficient nutrients for the production of lettuce, making the supplementary fertilization with commercial products unnecessary. Thus, the FPF presents the most suitable conditions to be used as substrate in aquaponics system with recirculation of the residual water from the intensive tilapia farming.

Proactive and Preventive Student Welfare Activities in Finnish Preschool and Elementary School: Handling of Transition to Formal Schooling and a National Anti-Bullying Program as Examples

Prerequisites and effects of proactive and preventive psycho-social student welfare activities in Finnish preschool and elementary school were of interest in the present thesis. So far, Finnish student welfare work has mainly focused on interventions and individuals, and the voluminous possibilities to enhance well-being of all students as a part of everyday school work have not been fully exploited. Consequently, in this thesis three goals were set: (1) To present concrete examples of proactive and preventive psycho-social student welfare activities in Finnish basic education; (2) To investigate measurable positive effects of proactive and preventive activities; and (3) To investigate implementation of proactive and preventive activities in ecological contexts. Two prominent phenomena in preschool and elementary school years—transition to formal schooling and school bullying—were chosen as examples of critical situations that are appropriate targets for proactive and preventive psycho-social student welfare activities. Until lately, the procedures concerning both school transitions and school bullying have been rather problem-focused and reactive in nature. Theoretically, we lean on the bioecological model of development by Bronfenbrenner and Morris with concentric micro-, meso-, exo- and macrosystems. Data were drawn from two large-scale research projects, the longitudinal First Steps Study: Interactive Learning in the Child–Parent– Teacher Triangle, and the Evaluation Study of the National Antibullying Program KiVa. In Study I, we found that the academic skills of children from preschool–elementary school pairs that implemented several supportive activities during the preschool year developed more quickly from preschool to Grade 1 compared with the skills of children from pairs that used fewer practices. In Study II, we focused on possible effects of proactive and preventive actions on teachers and found that participation in the KiVa antibullying program influenced teachers‘ self-evaluated competence to tackle bullying. In Studies III and IV, we investigated factors that affect implementation rate of these proactive and preventive actions. In Study III, we found that principal‘s commitment and support for antibullying work has a clear-cut positive effect on implementation adherence of student lessons of the KiVa antibullying program. The more teachers experience support for and commitment to anti-bullying work from their principal, the more they report having covered KiVa student lessons and topics. In Study IV, we wanted to find out why some schools implement several useful and inexpensive transition practices, whereas other schools use only a few of them. We were interested in broadening the scope and looking at local-level (exosystem) qualities, and, in fact, the local-level activities and guidelines, along with teacherreported importance of the transition practices, were the only factors significantly associated with the implementation rate of transition practices between elementary schools and partner preschools. Teacher- and school-level factors available in this study turned out to be mostly not significant. To summarize, the results confirm that school-based promotion and prevention activities may have beneficial effects not only on students but also on teachers. Second, various top-down processes, such as engagement at the level of elementary school principals or local administration may enhance implementation of these beneficial activities. The main message is that when aiming to support the lives of children the primary focus should be on adults. In future, promotion of psychosocial well-being and the intrinsic value of inter- and intrapersonal skills need to be strengthened in the Finnish educational systems. Future research efforts in student welfare and school psychology, as well as focused training for psychologists in educational contexts, should be encouraged in the departments of psychology and education in Finnish universities. Moreover, a specific research centre for school health and well-being should be established.

Trustworthy context dependency in ubiquitous systems

The modern society is getting increasingly dependent on software applications. These run on processors, use memory and account for controlling functionalities that are often taken for granted. Typically, applications adjust the functionality in response to a certain context that is provided or derived from the informal environment with various qualities. To rigorously model the dependence of an application on a context, the details of the context are abstracted and the environment is assumed stable and fixed. However, in a context-aware ubiquitous computing environment populated by autonomous agents, a context and its quality parameters may change at any time. This raises the need to derive the current context and its qualities at runtime. It also implies that a context is never certain and may be subjective, issues captured by the context’s quality parameter of experience-based trustworthiness. Given this, the research question of this thesis is: In what logical topology and by what means may context provided by autonomous agents be derived and formally modelled to serve the context-awareness requirements of an application? This research question also stipulates that the context derivation needs to incorporate the quality of the context. In this thesis, we focus on the quality of context parameter of trustworthiness based on experiences having a level of certainty and referral experiences, thus making trustworthiness reputation based. Hence, in this thesis we seek a basis on which to reason and analyse the inherently inaccurate context derived by autonomous agents populating a ubiquitous computing environment in order to formally model context-awareness. More specifically, the contribution of this thesis is threefold: (i) we propose a logical topology of context derivation and a method of calculating its trustworthiness, (ii) we provide a general model for storing experiences and (iii) we formalise the dependence between the logical topology of context derivation and its experience-based trustworthiness. These contributions enable abstraction of a context and its quality parameters to a Boolean decision at runtime that may be formally reasoned with. We employ the Action Systems framework for modelling this. The thesis is a compendium of the author’s scientific papers, which are republished in Part II. Part I introduces the field of research by providing the mending elements for the thesis to be a coherent introduction for addressing the research question. In Part I we also review a significant body of related literature in order to better illustrate our contributions to the research field.

Photoexcitation dynamics in organic solar cell donor/acceptor systems

Solceller presenteras ofta som ett miljövänligt alternativ för energiproduktion. Det största hindret för en bredare ibruktagning av kiselbaserade solceller är deras höga pris. I och med upptäckten av ledande och halvledande organiska (kolbaserade) molekyler och polymerer har ett nytt forskningsområde, organisk elektronik, vuxit fram. Den stora fördelen med organisk elektronik är att de använda materialen oftast är lösliga. Tillverkning av elektroniska komponenter kan då göras med hjälp av konventionella trycktekniker där bläcket ersatts med upplösta organiska material. Detta har potential att betydligt sänka priset för solceller. Nackdelen med organisk elektronik är att de använda materialen är komplexa, och de fysikaliska processerna i dem likaså. I min avhandling har jag studerat fotofysiken i två polymerer, P3HT och APFO3, som kan användas för att tillverka organiska solceller. Blandade med fullerenderivatet PCBM, som är en stark elektronacceptor, fås ett material som effektivt producerar elektroner och hål under belysning. I praktiken bidrar dock inte alla skapade laddningar till strömmen ur solcellen. Elektronerna och hålen kan förbli bundna till varandra i olika exciterade tillstånd, och även de som är fria kan träffa på motsatta laddningar under vägen till kontakterna och rekombinera. Centralt i mitt arbete har varit att identifiera olika typer av exciterade tillstånd i dessa solcellsmaterial, samt att bestämma deras livstider och rekombination. Metoden för detta har varit s.k. fotoinducerad absorption, som mäter fotoexcitationernas absorptioner i infraröda våglängdsområdet. De två viktigaste resultaten som presenteras i avhandlingen är en ratekvationsmodell för fotoexcitationsdynamiken i APFO3 på ultrasnabba tidsskalor (femtosekund - microsekund) och bildandet av en rekombinationshämmande dipol vid gränsytan för P3HT och PCBM som följd av värmebehandling. Dessa resultat bidrar till förståelsen av de fotofysikaliska processerna i relaterade material.

Structural and operational optimisation : applications in energy systems

In this work mathematical programming models for structural and operational optimisation of energy systems are developed and applied to a selection of energy technology problems. The studied cases are taken from industrial processes and from large regional energy distribution systems. The models are based on Mixed Integer Linear Programming (MILP), Mixed Integer Non-Linear Programming (MINLP) and on a hybrid approach of a combination of Non-Linear Programming (NLP) and Genetic Algorithms (GA). The optimisation of the structure and operation of energy systems in urban regions is treated in the work. Firstly, distributed energy systems (DES) with different energy conversion units and annual variations of consumer heating and electricity demands are considered. Secondly, district cooling systems (DCS) with cooling demands for a large number of consumers are studied, with respect to a long term planning perspective regarding to given predictions of the consumer cooling demand development in a region. The work comprises also the development of applications for heat recovery systems (HRS), where paper machine dryer section HRS is taken as an illustrative example. The heat sources in these systems are moist air streams. Models are developed for different types of equipment price functions. The approach is based on partitioning of the overall temperature range of the system into a number of temperature intervals in order to take into account the strong nonlinearities due to condensation in the heat recovery exchangers. The influence of parameter variations on the solutions of heat recovery systems is analysed firstly by varying cost factors and secondly by varying process parameters. Point-optimal solutions by a fixed parameter approach are compared to robust solutions with given parameter variation ranges. In the work enhanced utilisation of excess heat in heat recovery systems with impingement drying, electricity generation with low grade excess heat and the use of absorption heat transformers to elevate a stream temperature above the excess heat temperature are also studied.

Trypanosoma vivax infection dynamics in a cattle herd maintained in a transition area between Pantanal lowlands and highlands of Mato Grosso do Sul, Brazil

Trypanosoma vivax outbreaks in beef cattle in the Pantanal region of Mato Grosso do Sul state, Brazil, causes relevant economical impact due to weight loss, abortion and mortality. Cattle moved from the Pantanal to adjacent areas of this ecosystem for breeding and fattening is a common feature. Therefore an epidemiological study on breeding cows in the transition area between Pantanal lowland and adjacent highlands of Mato Grosso do Sul was performed to determine the T. vivax infection dynamics and outbreak risk. Three experimental groups were formed: Group 1 consisted of cows parasitologically negative by the Woo test and in the enzyme-linked immunosorbent assay for T. vivax antibody detection (Tv-ELISA-Ab); Group 2 parasitologically negative and positive in the Tv-ELISA-Ab; and in Group 3 cows were parasitologically positive and with positive reactions in the Tv-ELISA-Ab. During 24 months, the cows' dislodgment between the above established groups was monitored by Woo test and Tv-ELISA-Ab exams. The tabanid population was also monitored and the highest number occurred during the rainy season. Although parasitemias were detected only in the first four samplings of the experimental period, the cows could be considered as trypanotolerant, because no clinical signs were observed. Despite the higher T. vivax incidence during the dry season, no disease symptoms were seen. Even though T. vivax epidemiological situation in the herd was characterized as endemic with seasonal variation, the probability of outbreaks was null within the conditions of the study.

Parasitism level by helminths and weight gain of calves kept in organic and conventional grazing

Sustainable production is a principle in which we must meet the needs of the present without compromising the capacity of future generations. Despite the successful development of pesticides against endo and ectoparasites found in domestic ruminants, these parasites are still the major problem of the herbivore production system. The purpose of this study was to know the population of gastrintestinal parasites and their influence on weight gain of calves kept in organic and conventional grazing. Thus, organic and conventional calves were randomly selected in 2008 and 2009. The fecal egg count (FEC) indentified the following genders of helminths: Haemonchus, Trichostrongylus, Oesophagostomum, Cooperia, Strongyloides, Trichuris and oocysts of Eimeria. There was no significant difference (p>0.05) between FEC in organic and conventional animals. Calves younger than 6 months showed significant higher infection (p<0.05) than calves between 7 and 12 months of age. The weight gain observed during the study was of 327g/day and 280g/day for conventional and organic systems animals, respectively. Consequently, the combination of sustainable practices of grazing associated with the selective application of anthelmintics may be a feasible alternative for nematode control in a conventional system and in transition to an organic one.