Fiberglass-reinforced glulam beams: Mechanical properties and theoretical model

The glued-laminated lumber (glulam) technique is an efficient process for making rational use of wood. Fiber-Reinforced Polymers (FRPs) associated with glulam beams provide significant gains in terms of strength and stiffness, and also alter the mode of rupture of these structural elements. In this context, this paper presents a theoretical model for designing reinforced glulam beams. The model allows for the calculation of the bending moment, the hypothetical distribution of linear strains along the height of the beam, and considers the wood has a linear elastic fragile behavior in tension parallel to the fibers and bilinear in compression parallel to the fibers, initially elastic and subsequently inelastic, with a negative decline in the stress-strain diagram. The stiffness was calculated by the transformed section method. Twelve non-reinforced and fiberglass reinforced glulam beams were evaluated experimentally to validate the proposed theoretical model. The results obtained indicate good congruence between the experimental and theoretical values.

A procedure to estimate parameters of a line segment taking into account its representation through π circuits: Theoretical development

The objective of this paper is to show an alternative methodology to estimate per unit length parameters of a line segment of a transmission line. With this methodology the line segment parameters can be obtained starting from the phase currents and voltages in receiving and sending end of the line segment. If the line segment is represented as being one or more π circuits whose frequency dependent parameters are considered lumped, its impedance and admittance can be easily expressed as functions of the currents and voltages at the sending and receiving end. Because we are supposing that voltages and currents at the sending and receiving end of the line segment (in frequency domain) are known, it is possible to obtains its impedance and admittance and consequently its per unit length longitudinal and transversal parameters. The procedure will be applied to estimate the longitudinal and transversal parameters of a small segment of a single-phase line that is already built. © 2006 IEEE.

Theoretical model and experimental analysis of glulam beam reinforced with FRP

This work present a study of glulam beams reinforced with FRP. It was developed a theoretical model that calculates strength and stiffness of the beams. The model allows for the calculation of the bending moment, the hypothetical distribution of linear strains along the height of the beam, and considers the wood has a linear elastic fragile behavior in tension parallel to the fibers and bilinear in compression parallel to the fibers, initially elastic and subsequently inelastic, with a negative decline in the stress-strain diagram. The stiffness was calculated by the transformed section method. Twelve non-reinforced and fiberglass reinforced glulam beams were evaluated experimentally to validate the proposed theoretical model. The results obtained indicate good congruence between the experimental and theoretical values.

The importance of citizen awareness in controlling air pollution in metropolitan areas of Latin America: the theoretical framework

Includes bibliography

Theoretical and experimental evaluation of the influence of the length of drill rods in the SPT-T test

The influence of soil drill rod length on the N value in the SPT-T test has been studied extensively by Mello (1971), Schmertmann & Palacios (1979), Odebrecht et al. (2002) and Cavalcante (2002). This paper presents an analysis of the Standard Penetration Test supplemented with torque measurement (SPT-T). A theoretical study of the resistance of the rod material to torsion and bending indicated that the shear stress caused by the rod self-weight represents less than 1% of that caused by the torsional moment. An experimental study with electric torquemeters attached to a horizontal rod system, as well as two field tests in the vertical direction, were also carried out to compare and substantiate the results. The purpose of these tests was to analyze changes along the length of the rod in response to successive increments at 1-meter intervals. Torque measurements were taken at each increment of the length to ascertain the accuracy of the theoretical data. The difference between the applied torque and the measured torque at the end of rod system was lower than the minimum scale of mechanical torquemeters used in practice.

Managing environmental training in organizations: Theoretical review and proposal of a model

Purpose: The aim of this work is to address the issue of environmental training in organizations, presenting a theoretical review on the subject and proposing a model that highlights the importance of this type of training for organizations. Design/methodology/approach: The paper presents a thorough, updated literature review, discusses typology and the best practices of environmental training, and presents a framework integrating environmental training and organizational results. Findings: A careful consideration allows identifying a significant theoretical gap related to the lack of theoretical references, best practices, and an alignment between environmental training and organizational results. To overcome this gap, a model was proposed that helps to manage the environmental training process in organizations. Research limitations/implications: The paper needs to be complemented with empirical research on the topic. Originality/value: Environmental training is considered to be an essential element for organizations seeking to mitigate their environmental impacts. ISO 14001 states that environmental management is a duty of certified organizations. However, there have been few published articles that suggest models and insights to improve the environmental training in organizations. © Emerald Group Publishing Limited.

Theoretical approach including friction for determining strain limits in punch stretching of anisotropic sheet metals

A new analytical theory including friction was developed to assess strain limits in punch stretching of anisotropic sheet metals. This new approach takes into consideration the anisotropic behaviour of sheet materials and could explain the mechanical behaviour of a variety of anisotropic sheet materials. The theory explains the sheet metal failure so for the drawing as the stretching region of the forming limit curve, particularly for materials that present the strain-ratio dependence of limit strain ε 1, where dε 1/dρ is not always greater than zero. dε 1/ dρ or dε 1/dε 2 could be equal to or smaller than zero for a range of materials. Therefore, this new theory can explains such experimental observations, besides to assuming that membrane element relations near the pole, for the case of punch stretching are dependent of sheet metal properties as the process history and also suggests that the onset of local necking is controlled by shear. Thus, theoretical results obtained through this new approach are compared with experimental results available in the literature. It is demonstrated the effect of friction on a FLC curve for both regions, drawing and stretching. © 2010 American Institute of Physics.

Towards a theory of the small firm: theoretical aspects and some policy implications

Includes bibliography

A teoria de Norbert Elias: uma análise do ser professor

No presente artigo, conforme o entendimento de que modelos te- óricos subsidiam a compreensão de fenômenos investigativos, objetivou-se elucidar os conceitos da teoria sociológica de Norbert Elias, considerando-se que esta é uma excelente fonte de análise para se compreender o universo do ser professor, apesar de o autor não abordar diretamente questões relacionadas ao campo da educação. A partir do conceito de configuração, é possível dizer que a constituição do ser professor resulta das diferentes configurações nas quais ele está imerso, pois, de acordo com Elias, as pessoas (professores, pais, gestores, ministros, alunos etc.) modelam suas ideias a partir de todas as suas experiências e, essencialmente, das experiências vividas no interior do próprio grupo. É observável que as configurações, formadas por grupos interdependentes de pessoas, e não por indivíduos singulares, apresentam-se cada vez mais ampliadas nos contextos escolares, com funções especializadas e específicas (professores, alunos, diretores, coordenadores, supervisores, secretários etc.), em grupos que se tornam cada vez mais funcionalmente dependentes. As cadeias de interdependência estão mais diferenciadas e, consequentemente, mais opacas e dificilmente controláveis por parte de quaisquer grupos ou indiví- duos. Portanto, uma melhor compreensão será possível quando se estudar empiricamente as configurações que estão em jogo na educação brasileira. Daí se justifica a análise das configurações e das teias de interdependência em que os professores estão envolvidos. Enfim, a aplicação dos modelos de competição abordados por Elias possibilita evidenciar as problemáticas sociológicas do ser professor, tornando-as mais evidentes e facilitando o entendimento do jogo para reorganizá-lo em termos de equilíbrio na teia social.

Optimal moment to change pressure regulator and sprayer kit on center pivot irrigation machines: a theoretical proposal

A theoretical model was developed in order to determine the optimal moment for substituting the sprayer and pressure regulator kit on a center pivot irrigation machine. The model is based on the hypothesis that pressure regulator and sprayer deterioration decrease irrigation uniformity. To compensate the deficit that happens at under irrigated areas, an increase on irrigation depth is required. The model considers: additional water consumption and energy costs, maintenance and labor costs, as well as yield losses associated with under or over irrigated areas. The sum of all these components is compared to buying and installing a new spray kit cost, allowing the farmer to decide the best moment to renovate the sprayer and pressure regulator kits on a center pivot irrigation machine based on economic criteria.

Entre a Amnésia e a Vontade de nada Esquecer: notas sobre regimes de historicidade e história oral

In this paper we intend to sketch a configuration of the research practices of the Research Group Oral History and Mathematics Education (GHOEM) and, in general terms, to explain some concepts and procedures in which these practices are founded. In order to do this, the expression Regimes of Historicity - meaning the different ways of articulating the notions of present, past and future - is initially mobilized. By this expression we are able to understand the emergence of the discourse that underpins a set of actions and theoretical frameworks for the research in Mathematics Education and more particularly, for the Historiography of Mathematics Education.

Non-tax revenue of subnational governments: theoretical background, experience from an international perspective and recommendations

Includes bibliography

Crystallographic portrayal of different conformational states of a Lys49 phospholipase A2 homologue: Insights into structural determinants for myotoxicity and dimeric configuration

Catalytically inactive phospholipase A2 (PLA2) homologues play key roles in the pathogenesis induced by snake envenomation, causing extensive tissue damage via a mechanism still unknown. Although, the amino acid residues directly involved in catalysis are conserved, the substitution of Asp49 by Arg/Lys/Gln or Ser prevents the binding of the essential calcium ion and hence these proteins are incapable of hydrolyzing phospholipids. In this work, the crystal structure of a Lys49-PLA2 homologue from Bothrops brazili (MTX-II) was solved in two conformational states: (a) native, with Lys49 singly coordinated by the backbone oxygen atom of Val31 and (b) complexed with tetraethylene glycol (TTEG). Interestingly, the TTEG molecule was observed in two different coordination cages depending on the orientation of the nominal calcium-binding loop and of the residue Lys49. These structural observations indicate a direct role for the residue Lys49 in the functioning of a catalytically inactive PLA2 homologue suggesting a contribution of the active site-like region in the expression of pharmacological effects such as myotoxicity and edema formation. Despite the several crystal structures of Lys49-PLA2 homologues already determined, their biological assembly remains controversial with two possible conformations. The extended dimer with the hydrophobic channel exposed to the solvent and the compact dimer in which the active site-like region is occluded by the dimeric interface. In the MTX-II crystal packing analysis was found only the extended dimer as a possible stable quaternary arrangement. © 2012 Elsevier B.V.

Innovation and economic development: theoretical retrospect and prospect

Includes bibliography

Capacity-stretching technical change: some empirical and theoretical aspects

Includes bibliography