3D gait assessment in young and elderly subjects using foot-worn inertial sensors.

This study describes the validation of a new wearable system for assessment of 3D spatial parameters of gait. The new method is based on the detection of temporal parameters, coupled to optimized fusion and de-drifted integration of inertial signals. Composed of two wirelesses inertial modules attached on feet, the system provides stride length, stride velocity, foot clearance, and turning angle parameters at each gait cycle, based on the computation of 3D foot kinematics. Accuracy and precision of the proposed system were compared to an optical motion capture system as reference. Its repeatability across measurements (test-retest reliability) was also evaluated. Measurements were performed in 10 young (mean age 26.1±2.8 years) and 10 elderly volunteers (mean age 71.6±4.6 years) who were asked to perform U-shaped and 8-shaped walking trials, and then a 6-min walking test (6MWT). A total of 974 gait cycles were used to compare gait parameters with the reference system. Mean accuracy±precision was 1.5±6.8cm for stride length, 1.4±5.6cm/s for stride velocity, 1.9±2.0cm for foot clearance, and 1.6±6.1° for turning angle. Difference in gait performance was observed between young and elderly volunteers during the 6MWT particularly in foot clearance. The proposed method allows to analyze various aspects of gait, including turns, gait initiation and termination, or inter-cycle variability. The system is lightweight, easy to wear and use, and suitable for clinical application requiring objective evaluation of gait outside of the lab environment.

Quantitative ultrasound of the heel and fracture risk assessment: an updated meta-analysis.

Meta-analysis of prospective studies shows that quantitative ultrasound of the heel using validated devices predicts risk of different types of fracture with similar performance across different devices and in elderly men and women. These predictions are independent of the risk estimates from hip DXA measures.Introduction Clinical utilisation of heel quantitative ultrasound (QUS) depends on its power to predict clinical fractures. This is particularly important in settings that have no access to DXA-derived bone density measurements. We aimed to assess the predictive power of heel QUS for fractures using a meta-analysis approach.Methods We conducted an inverse variance random effects meta-analysis of prospective studies with heel QUS measures at baseline and fracture outcomes in their follow-up. Relative risks (RR) per standard deviation (SD) of different QUS parameters (broadband ultrasound attenuation [BUA], speed of sound [SOS], stiffness index [SI], and quantitative ultrasound index [QUI]) for various fracture outcomes (hip, vertebral, any clinical, any osteoporotic and major osteoporotic fractures) were reported based on study questions.Results Twenty-one studies including 55,164 women and 13,742 men were included in the meta-analysis with a total follow-up of 279,124 person-years. All four QUS parameters were associated with risk of different fracture. For instance, RR of hip fracture for 1 SD decrease of BUA was 1.69 (95% CI 1.43-2.00), SOS was 1.96 (95% CI 1.64-2.34), SI was 2.26 (95%CI 1.71-2.99) and QUI was 1.99 (95% CI 1.49-2.67). There was marked heterogeneity among studies on hip and any clinical fractures but no evidence of publication bias amongst them. Validated devices from different manufacturers predicted fracture risks with similar performance (meta-regression p values > 0.05 for difference of devices). QUS measures predicted fracture with a similar performance in men and women. Meta-analysis of studies with QUS measures adjusted for hip BMD showed a significant and independent association with fracture risk (RR/SD for BUA = 1.34 [95%CI 1.22-1.49]).Conclusions This study confirms that heel QUS, using validated devices, predicts risk of different fracture outcomes in elderly men and women. Further research is needed for more widespread utilisation of the heel QUS in clinical settings across the world.

Description of an in vivo model for the assessment of eosinophil chemoattractants in the mouse

Chemokines (chemoattractant cytokines) induce potent and selective chemotaxis of leukocyte subsets in vitro. Here, we review briefly the chemokines shown to induce eosinophil chemotaxis in vitro and describe a novel model for the study of the ability of chemokines to stimulate eosinophil migration in vivo. Eosinophils were purified from the blood of mice over-expressing the IL-5 gene and labelled with 111In. Only the C-C chemokines, eotaxin and MIP-1alpha, but not RANTES, MCP-1, MCP-3, MCP-4, MIP-1ß, KC and MIP-2, effectively induced the recruitment of 111In-eosinophils in mouse skin. We suggest that this mouse model will be useful in assessing the role of endogenously-generated chemokines in mediating eosinophil migration to sites of allergic inflammation in vivo.

Adolescent substance-use assessment: methodological issues in the use of the Adolescent Drug Abuse Diagnosis (ADAD).

During the past twenty years, various instruments have been developed for the assessment of substance use in adolescents, mainly in the United States. However, few of them have been adapted to, and validated in, French-speaking populations. Consequently, although increasing alcohol and drug use among teenagers has become a major concern, the various health and social programs developed in response to this specific problem have received little attention with regard to follow-up and outcome assessment. A standardized multidimensional assessment instrument adapted for adolescents is needed to assess the individual needs of adolescents and assign them to the most appropriate treatment setting, to provide a single measurement within and across health and social systems, and to conduct treatment outcome evaluations. Moreover, having an available instrument makes it possible to develop longitudinal and transcultural research studies. For this reason, a French version of the Adolescent Drug Abuse Diagnosis (ADAD) was developed and validated at the University Child and Adolescent Psychiatric Clinic in Lausanne, Switzerland. This article aims to discuss the methodological issues that we faced when using the ADAD instrument in a 4-year longitudinal study including adolescent substance users. Methodological aspects relating to the content and format of the instrument, the assessment administration and the statistical analyses are discussed.

Rehabilitation needs assessment in persons with spinal cord injury following the 2010 earthquake in Haiti: a pilot study using an ICF-based tool.

OBJECTIVE: The aim of this pilot study was to describe problems in functioning and associated rehabilitation needs in persons with spinal cord injury after the 2010 earthquake in Haiti by applying a newly developed tool based on the International Classification of Functioning, Disability and Health (ICF). DESIGN: Pilot study. SUBJECTS: Eighteen persons with spinal cord injury (11 women, 7 men) participated in the needs assessment. Eleven patients had complete lesions (American Spinal Injury Association Impairment Scale; AIS A), one patient had tetraplegia. METHODS: Data collection included information from the International Spinal Cord Injury Core Data Set and a newly developed needs assessment tool based on ICF Core Sets. This tool assesses the level of functioning, the corresponding rehabilitation need, and required health professional. Data were summarized using descriptive statistics. RESULTS: In body functions and body structures, patients showed typical problems following spinal cord injury. Nearly all patients showed limitations and restrictions in their activities and participation related to mobility, self-care and aspects of social integration. Several environmental factors presented barriers to these limitations and restrictions. However, the availability of products and social support were identified as facilitators. Rehabilitation needs were identified in nearly all aspects of functioning. To address these needs, a multidisciplinary approach would be needed. CONCLUSION: This ICF-based needs assessment provided useful information for rehabilitation planning in the context of natural disaster. Future studies are required to test and, if necessary, adapt the assessment.

Individual versus standard quality of life assessment in a phase II clinical trial in mesothelioma patients: feasibility and responsiveness to clinical changes.

BACKGROUND: In patients with malignant pleural mesothelioma undergoing a multimodality therapy, treatment toxicity may outweigh the benefit of progression-free survival. The subjective experience across different treatment phases is an important clinical outcome. This study compares a standard with an individual quality of life (QoL) measure used in a multi-center phase II trial. PATIENTS AND METHODS: Sixty-one patients with stage I-III technically operable pleural mesothelioma were treated with preoperative chemotherapy, followed by pleuropneumonectomy and subsequent radiotherapy. QoL was assessed at baseline, at day 1 of cycle 3, and 1, 3 and 6 months post-surgery by using the Rotterdam Symptom Checklist (RSCL) and the Schedule for the Evaluation of Quality of Life-Direct Weighting (SEIQoL-DW), a measure that is based on five individually nominated and weighted QoL-domains. RESULTS: Completion rates were 98% (RSCL) and 92% (SEIQoL) at baseline and 98%/89% at cycle 3, respectively. Of the operated patients (N=45) RSCL and SEIQoL were available from 86%/72%, 93%/74%, and 94%/76% at months 1, 3, and 6 post-surgery. Average assessment time for the SEIQoL was 24min compared to 8min needed for the RSCL. Median changes from baseline indicate that both RSCL QoL overall score and SEIQoL index remained stable during chemotherapy with a clinically significant deterioration (change>or=8 points) 1 month after surgery (median change of -66 and -14 for RSCL and SEIQoL, respectively). RSCL QoL overall scores improved thereafter, but remained beneath baseline level until 6 months after surgery. SEIQoL scores improved to baseline-level at month 3 after surgery, but worsened again at month 6. RSCL QoL overall score and SEIQoL index were moderately correlated at baseline (r=.30; p<or=.05) and at 6-month follow-up (r=.42; p<or=.05) but not at the other time points. CONCLUSION: The SEIQoL assessment seems to be feasible within a phase II clinical trial, but may require more effort from staff. More distinctive QoL changes in accordance with clinical changes were measured with the RSCL. Our findings suggest that the two measures are not interchangeable: the RSCL is to favor when mainly information related to the course of disease- and treatment is of interest.

Les symbioses industrielles : une nouvelle stratégie pour l'amélioration de l'utilisation des ressources matérielles et énergétiques par les activités économiques

RésuméCette thèse traite d'un domaine d'application de l'écologie industrielle, les symbioses industrielles, comme stratégie d'amélioration de la consommation des ressources matérielles et énergétiques et de la gestion des déchets par les activités économiques. Les symbioses industrielles cherchent à créer de nouvelles collaborations directement entre les acteurs économiques d'un territoire dans le but d'échanger de l'information, des matières premières et des déchets, et d'intensifier les mutualisations de services et d'infrastructures possibles entre entreprises voisines. Ces quatre types de collaboration sont représentés schématiquement dans la figure ci-dessous.Dans ce travail, la détection et la mise en oeuvre de symbioses industrielles sont abordées sous plusieurs angles. Les recherches réalisées concernent le développement de procédures de mise en oeuvre s'adressant aux collectivités publiques, aux institutions académiques et aux bureaux de conseil dans le domaine de l'environnement. Les objectifs des procédures sont de créer une dynamique de collaboration et de confiance entre les acteurs économiques et l'administration publique d'un territoire afin de détecter des symbioses industrielles potentielles. Ces procédures requièrent la gestion de grandes quantités d'informations relatives aux flux de matière et d'énergie.Un travail de terrain, réalisé sur les territoires du canton de Genève et de Lausanne Région et utilisé comme études de cas, a permis de mettre en évidence un grand nombre de symbioses industrielles qui existent déjà en Suisse romande. Plusieurs dizaines d'exemples ont été identifiés principalement dans lesdomaines de la gestion de l'eau, de l'énergie, des produits chimiques et des matériaux de construction. La législation suisse autoriserait cependant la concrétisation de nombreuses autres opportunités. Dans cette recherche, celles-ci sont évaluées techniquement, légalement, économiquement et environnementalement. La création d'un référentiel d'évaluation des opportunités permet de déterminer quelles sont les symbioses industrielles techniquement réalisables et pertinentes dans le contexte suisse et dans quels cas celles-ci représenteraient une réelle plus-value par rapport à l'utilisation actuelle de la ressource et aux filières existantes de collecte et de valorisation des déchets.Finalement, un logiciel, SymbioGIS, destiné à soutenir la détection et l'évaluation de symbioses industrielles potentielles a été développé. Il s'agit d'une interface web accessible pour de nombreux utilisateurs, couplée à une interface de systèmes d'information géographique. En plus de la détection de symbioses industrielles, plusieurs fonctionnalités sont proposées pour faciliter la prise en compte des flux de matière et d'énergie dans les problématiques liées à l'aménagement du territoire et au positionnement des activités économiques.En conclusion, cette recherche met en évidence la nécessité de rapprocher les institutions publiques en charge de la protection de l'environnement, de la promotion économique et de l'aménagement du territoire pour favoriser l'essor des symbioses industrielles comme stratégie pour la gestion des ressources matérielles et énergétiques. Elle propose des pistes pour intensifier les collaborations entre ces domaines et accélérer le partage des connaissances liées aux flux de matière et d'énergie et à leur cheminement au sein des activités économiques afin de rendre le système industriel existant en Suisse romande viable à long terme. Parallèlement, elle étudie les possibilités de transposer ces considérations et les procédures et outils développés dans le contexte économique et social de la région Asie-Pacifique, où se trouvent aujourd'hui de nombreuses activités de production.SummaryIndustrial symbioses: A new strategy for improving how economic activities use material and energy resourcesThis thesis focuses on one application of industrial ecology, industrial symbioses, as a strategy for improving how economic activities consume material and energy resources. Industrial symbioses seek to create new collaborations among economic players with the goal of exchanging information, raw materials, and waste directly among area businesses, and to step up the potential pooling of services and infrastructure among neighboring companies.The identification and implementation of industrial symbioses are studied from several angles. The research first examines the development of implementation procedures for government bodies, academic institutions, and environmental consulting services. The purpose of the procedures is to create a dynamic of collaboration and trust between the economic players and the public officials in a region in order to identify potential industrial symbioses. The procedures necessitate managing large amounts of information about material and energy flows.Fieldwork conducted in the canton of Geneva and the Lausanne region, and used as case studies for the research, highlights a great number of industrial symbioses that already exist in French-speaking Switzerland. Several dozen examples are identified, primarily in the areas of water management, energy, chemical products, and building materials; however, Swiss law would permit many others. The research evaluates these opportunities from a technical, legal, economic, and environmental standpoint. By developing an assessment framework it is possible to determine which industrial symbioses are technically feasible and pertinent in Switzerland, and under what circumstances they would represent real added value compared to the current use of the resource and to existing systems for collecting and reusing waste.Lastly, SymbioGIS software was developed to help identify and assess potential industrial symbioses. The program's Web-based interface can be accessed by multiple users and is coupled with an interface that provides geographic information. In addition to identifying industrial symbioses, several program functionalities make it easier to consider material and energy flows with regard to local development issues and siting economic activities.In conclusion, the research highlights the need to bring together public institutions charged with protecting the environment, promoting economic activity, and overseeing development in order to foster the expansion of industrial symbioses as a strategy for managing material and energy resources. It proposes solutions for stepping up collaboration among these players and accelerating the sharing of knowledge about material and energy flows and their paths within economic activities with the goal of making theexisting industrial system in French-speaking Switzerland viable long-term. Also examined were thepossibilities of transposing these considerations and the study's findings about Switzerland to the economic and social context of the Asia-Pacific region, where much production is now located.

A dynamic assessment of medication-taking behavior during pregnancy and postpartum: should cART adherence be reinforced during postpartum?

This study compared adherence (persistence and execution) during pregnancy and postpartum in HIV-positive women having taken part in the adherence-enhancing program of the Community Pharmacy of the Department of Ambulatory Care and Community Medicine in Lausanne between 2004 and 2012. This interdisciplinary program combined electronic drug monitoring and semi-structured, repeated motivational interviews. This was a retrospective, observational study. Observation period spread over from first adherence visit after last menstruation until 6 months after childbirth. Medication-taking was recorded by electronic drug monitoring. Socio-demographic and delivery data were collected from Swiss HIV Cohort database. Adherence data, barriers and facilitators were collected from pharmacy database. Electronic data were reconciled with pill-count and interview notes in order to include reported pocket-doses. Execution was analyzed over 3-day periods by a mixed effect logistic model, separating time before and after childbirth. This model allowed us to estimate different time slopes for both periods and to show a sudden fall associated with childbirth. Twenty-five pregnant women were included. Median age was 29 (IQR: 26.5, 32.0), women were in majority black (n_17,68%) and took a cART combining protease and nucleoside reverse transcriptase inhibitors (n_24,96%). Eleven women (44%) were ART-naı¨ve at the beginning of pregnancy. Twenty women (80%) were included in the program because of pregnancy. Women were included at all stages of pregnancy. Six women (24%) stopped the program during pregnancy, 3 (12%) at delivery, 4 (16%) during postpartum and 12 (48%) stayed in program at the end of observation time. Median number of visits was 4 (3.0, 6.3) during pregnancy and 3 (0.8, 6.0) during postpartum. Execution was continuously high during pregnancy, low at beginning of postpartum and increased gradually during the 6 months of postpartum. Major barriers to adherence were medication adverse events and difficulties in daily routine. Facilitators were motivation for promoting child-health and social support. The dramatic drop and very slow increase in cART adherence during postpartum might result in viral rebound and drug resistance. Although much attention is devoted to pregnant women, interdisciplinary care should also be provided to women in the community during first trimester of postpartum to support them in sustaining cART adherence.

New bench test for venous cannula performance assessment.

Cannula design is of prime importance for venous drainage during cardiopulmonary bypass (CPB). To evaluate cannulas intended for CPB, an in vitro circuit was set up with silicone tubing between the test cannula encased in a movable preload reservoir and another static reservoir. The pressure-drop (DeltaP) value (P-drainage - P-preload) was measured using Millar pressure transducers. Flow rate (Q) was measured using an ultrasound flowmeter. Data display and data recording were controlled using a LabView application, custom made particularly for our experiments. Our results demonstrated that DeltaP, Q, and cannula resistance (DeltaP/Q) values were significantly decreased when the cannula diameter was increased for Smart and Medtronic cannulas. Smartcanula showed 36% and 43% less resistance compared to Medtronic venous and Medtronic femoral cannulas, respectively. The cannula shape (straight- or curved-tips) did not affect the DLP cannula resistance. Out of five cannulas tested, the Smartcanula outperforms the other commercially available cannulas. The mean (DeltaP/Q) values were 3.3 +/- 0.08, 4.07 +/- 0.08, 5.58 +/- 0.10, 5.74 +/- 0.15, and 6.45 +/- 0.15 for Smart, Medtronic, Edwards, Sarns, and Gambro cannulas, respectively (two-way ANOVA, p < 0.0001). In conclusion, the present assay allows discrimination between different forms of cannula with high or low lumen resistance.

Evaluation cardiologique préopératoire avant chirurgie non cardiaque: stratification du risque cardiovasculaire [Preoperative cardiac assessment before non-cardiac surgery: cardiac risk stratification].

Perioperative cardiac events occurring in patients undergoing non-cardiac surgery are a common cause of morbidity and mortality. Current guidelines recommend an individualized approach to preoperative cardiac risk stratification prior to non-cardiac surgery, integrating risk factors both for the patient (active cardiac conditions, clinical risk factors, functional capacity) and for the planned surgery. Preoperative cardiac investigations are currently limited to high-risk patients in whom they may contribute to modify the perioperative management. A multidisciplinary approach to such patients, integrating the general practitioner, is recommended in order to define an individualized peri-operative strategy.