Success factors in a forming strategic positioning of manufacturing operations within global supply chains

Managing supply chains effectively has become a critical element in enhancing company profitability and has been identified as the new frontier of competitive advantage. An important element of effective supply chain management is the strategic positioning of the company. The strategic positioning process is concerned with the choice of production-centred activities a company carries out internally and those provided externally. Strategic positioning within manufacturing supply chains however is a relatively recent research topic with apparently few articles currently available that explicitly address associated issues directly. Moreover there is no previous research working strategic positioning of manufacturing operations in global context. Therefore the purpose of this paper is to explore strategic positioning within global supply chains. This paper is based on three cases drawn from the cross industry sector manufacturing companies. It describes an exploratory analysis which is aimed at gaining insight into the success factor to form a strategic positioning within global supply chains.

A manufacturing systems modelling using system dynamics:forming a dedicated modelling tool

Discrete event simulation is a popular aid for manufacturing system design; however in application this technique can sometimes be unnecessarily complex. This paper is concerned with applying an alternative technique to manufacturing system design which may well provide an efficient form of rough-cut analysis. This technique is System Dynamics, and the work described in this paper has set about incorporating the principles of this technique into a computer based modelling tool that is tailored to manufacturing system design. This paper is structured to first explore the principles of System Dynamics and how they differ from Discrete Event Simulation. The opportunity for System Dynamics is then explored, and this leads to defining the capabilities that a suitable tool would need. This specification is then transformed into a computer modelling tool, which is then assessed by applying this tool to model an engine production facility. Read More: http://www.worldscientific.com/doi/abs/10.1142/S0219686703000228

Introduction of structural diversity into oligonucleotides containing 6-thioguanine via on-column conjugation

A method is described for the introduction of structural diversity into the thiocarbonyl group of 6-thioguanine within support-bound, fully protected oligonucleotides via 'on-column′ conjugation. 2′-Deoxy-6-thioguanosine with a chemically-labile trigger at its 6-thio function was incorporated at defined sites into chemically synthesized oligonucleotides. Following selective removal of the thio-protection group the support-immobilized oligonucleotides were conjugated with various groups on-column, and then deprotected and purified to produce a number of oligomers each containing a different modified base. Since the modification is accomplished on-column without affecting other functional and protecting groups in the oligomers this method is compatible with introducing structural diversity at multiple sites in DNA. © 2003 Elsevier Science Ltd. All rights reserved.

Preferred orientation in 18/10, 18/12 and 18/14 chromium/nickel steels and its relation to tensile and press forming properties

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

The relationship between mechanical properties, preffered orientation and press forming behaviour of copper and 70/30 brass

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

The methaemoglobin forming and GSH depleting effects of dapsone and monoacetyl dapsone hydroxylamines in human diabetic and non-diabetic erythrocytes in vitro

The respective methaemoglobin forming and GSH depleting capabilities of monoacetyl dapsone hydroxylamine (MADDS-NHOH) and dapsone hydroxylamine (DDS-NHOH) were compared in human diabetic and non-diabetic erythrocytes in vitro with a view to select the most potent agent for future oxidative stress and antioxidant evaluation studies. Administration of both metabolites to non-diabetic erythrocytes over the 20 min period of the study resulted in significantly more methaemoglobin formation at all four time points compared with the diabetic erythrocytes (P<0.0001). At all four time points, significantly more methaemoglobin was formed in response to MADDS-NHOH in non-diabetic cells compared with the effects of DDS-NHOH on diabetic erythrocytes (P<0.0001). At the 5 and 10 min time points, significantly more methaemglobin was formed in non-diabetic cells in the presence of MADDS-NHOH compared with DDS-NHOH (P<0.05). At the 5 min time point only, significantly more methaemoglobin was formed in the presence of MADDS-NHOH in diabetic cells compared with that of DDS-NHOH (P<0.01). However, compared with diabetic control GSH levels, the presence of DDS-NHOH caused a significant depletion in GSH at 5, 10 and 20 min time points in diabetic cells (P<0.001). In addition, the presence of DDS-NHOH caused a significant reduction in GSH levels in diabetic cells in comparison with those of non-diabetics at the 5, 10 and 20 min, (P<0.005). DDS-NHOH was also associated with a significant depletion of GSH levels in diabetic cells compared with those of non-diabetic control erythrocytes (P<0.0001). The presence of MADDS-NHOH in diabetic erythrocytes led to a significant reduction in GSH levels at the 20 min time point compared with those of non-diabetics (P<0.001), but there were no significant differences at the 5, 10 and 15 min points. Due to its greater GSH-depleting action, DDS-NHOH will be selected for future use in the oxidative stress assessment in diabetic erythrocytes. © 2004 Elsevier B.V. All rights reserved.

Groud of Model for the Generalized Criterion Forming at Differential Diagnostics of Dermatological Diseases

The basic methods of decisions making in multi-criterion conditions are considered, from which the method of the weighed total for calculation of diagnostic indexes significance in differential diagnostics of dermatological diseases is chosen.

The Problems of Forming the Inner Personal Conflict as a Factor which Influences Decision-making

the article views examine the problems concerning with the sources of origin of unconscious the inner personal conflicts and the way the presence of this factor is reflected on the decision-making process by a person.

Forming of Learning Set for Neural Networks in Problems of Losless Data Compression

questions of forming of learning sets for artificial neural networks in problems of lossless data compression are considered. Methods of construction and use of learning sets are studied. The way of forming of learning set during training an artificial neural network on the data stream is offered.

Forming Knowledge Bases in the Computer Knowledge Bank on Medical Diagnostics

* This paper was made according to the program of FEBRAS, project "Creating methods and tools for developing intellectual information systems in medicine and public health".

A fogyasztói etnocentrizmus új koncepcionális modelljének kialakítása és verifikálása = Forming and verification of a new conceptual model of the customer ethnocentrism

A szerzők cikke az etnocentrikus érzelmek hatását mutatja be a hazai és a külföldi termékek megítélésére. Empirikus kutatásaikra és regressziós modelljeikre támaszkodva felvázolják azt a hatásmechanizmust, amely a szakirodalomba a fogyasztói etnocentrizmus néven vonult be. Megállapítják, hogy másképp hatnak a patrióta és a nacionalista érzelmek a hazai és a külföldi termékek iránti attitűdökre. Míg a hazai termékeknél egy karakterisztikus, többdimenziós kép tárul elénk, addig a cseh, kanadai és német termékek megítéléséből általánosított, külföldi termékek esetében csak a termékkel való azonosulást tudták kiemelni. A megkérdezettek demográfiai jellemzői közül egyedül a férfiak mutattak statisztikailag azonos irányú és erősségű kapcsolatot a hazai és a külföldi termékek megítélésénél. _______________________ The authors’ article presents effects of the ethnocentric emotion of the appreciation of the domestic and foreign goods. Based on their empirical and regressive models they feature that effectmechanism, which is named consumer ethnocentrism in the special literature. They set that the patriot and the nationalist emotions acting differently on attitudes of the domestic and the foreign goods.

Carbon nanotube reinforced aluminum based nanocomposite fabricated by thermal spray forming

The present research concentrates on the fabrication of bulk aluminum matrix nanocomposite structures with carbon nanotube reinforcement. The objective of the work was to fabricate and characterize multi-walled carbon nanotube (MWCNT) reinforced hypereutectic Al-Si (23 wt% Si, 2 wt% Ni, 1 wt% Cu, rest Al) nanocomposite bulk structure with nanocrystalline matrix through thermal spray forming techniques viz. plasma spray forming (PSF) and high velocity oxy-fuel (HVOF) spray forming. This is the first research study, which has shown that thermal spray forming can be successfully used to synthesize carbon nanotube reinforced nanocomposites. Microstructural characterization based on quantitative microscopy, scanning and transmission electron microscopy (SEM and TEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Raman spectroscopy and X ray photoelectron spectroscopy (XPS) confirms (i) retention and macro/sub-macro level homogenous distribution of multiwalled carbon nanotubes in the Al-Si matrix and (ii) evolution of nanostructured grains in the matrix. Formation of ultrathin β-SiC layer on MWCNT surface, due to chemical reaction of Si atoms diffusing from Al-Si alloy and C atoms from the outer walls of MWCNTs has been confirmed theoretically and experimentally. The presence of SiC layer at the interface improves the wettability and the interfacial adhesion between the MWCNT reinforcement and the Al-Si matrix. Sintering of the as-sprayed nanocomposites was carried out in an inert environment for further densification. As-sprayed PSF nanocomposite showed lower microhardness compared to HVOF, due to the higher porosity content and lower residual stress. The hardness of the nanocomposites increased with sintering time due to effective pore removal. Uniaxial tensile test on CNT-bulk nanocomposite was carried out, which is the first ever study of such nature. The tensile test results showed inconsistency in the data attributed to inhomogeneous microstructure and limitation of the test samples geometry. The elastic moduli of nanocomposites were computed using different micromechanics models and compared with experimentally measured values. The elastic moduli of nanocomposites measured by nanoindentation technique, increased gradually with sintering attributed to porosity removal. The experimentally measured values conformed better with theoretically predicted values, particularly in the case of Hashin-Shtrikman bound method.