O contrato de prestação de serviços de fornecimento de água

The theme of thid thesis is the water supply services contract. The texto starts with an analysis of the service, aimed at clarifying what is the system organization and the principles applicable to this essential public service. Then the water supply services contract is analyzed according to the law on essential public services. Subsequently, connections are established with other applicable laws and the differing doctrinal and jurisprudential perspectives are presented. The thesis ends with an outlook on the dispute resolution mechanisms at the users’ disposal.

Use of corticosteroids and the outcome of infants with bronchopulmonary dysplasia

Ventilator-dependent premature infants are often treated with dexamethasone. Several trials showed that steroids while improve pulmonary compliance and facilitate extubation, some treated infants may have adverse effects, such as alterations of growth curves. We conducted this retrospective study to evaluate the effects of steroids on mechanical ventilation, oxygen therapy, hospital length stay and mortality, in ventilator-dependent infants with bronchopulmonary dysplasia (BPD) (defined as the need of oxygen supplementation at 28 days of life). Twenty-six newborns with BPD were evaluated during 9 -- 42 days postpartum (mean = 31 days) and were divided into two groups: Group I - 14 newborns that did not receive dexamethasone, and Group II - 12 newborns that received dexamethasone at 14 --21 days of life. Dexamethasone was given at a dose of 0.25 mg per kilogram of body weight twice daily intravenously for 3 days, after which the dose was tapered. RESULTS: There were no statistically significant differences in the mean length of mechanical ventilation (Group I - 37 days, Group II - 35 days); oxygen supplementation (Group I - 16 days, Group II - 29 days); hospital stay (Group I - 72 days, Group II - 113 days); mortality (Group I - 35.7%, Group II - 41.6%). At birth, Group II was lighter (BW: Group I - 1154 grams ± 302, Group II - 791 grams ± 165; p < 0.05) and smaller (height: Group I - 37.22 cm ± 3.3, Group II - 33.5 ± 2.4; p< 0.05) than Group I. At 40 weeks, there were no statistically significant differences between groups in relation to anthropometric measurements. CONCLUSIONS: The use of corticosteroids in bronchopulmonary dysplasic infants may influence the somatic growth during its use. However, after its suspension, a recovery seems to occur, suggesting that its influence could be transitory.

Production and characterization of electrospun composite fibers: confinement of thermosensitive microgels

Materials engineering focuses on the assembly of materials´ properties to design new products with the best performance. By using sub-micrometer size materials in the production of composites, it is possible to obtain objects with properties that none of their compounds show individually. Once three-dimensional materials can be easily customized to obtain desired properties, much interest has been paid to nanostructured poly-mers in order to build biocompatible devices. Over the past years, the thermosensitive microgels have become more common in the framework of bio-materials with potential applicability in therapy and/or diagnostics. In addition, high aspect ratio biopolymers fibers have been produced using the cost-effective method called electrospinning. Taking advantage of both microgels and electrospun fibers, surfaces with enhanced functionalities can be obtained and, therefore employed in a wide range of applications. This dissertation reports on the confinement of stimuli-responsive microgels through the colloidal electro-spinning process. The process mainly depends on the composition, properties and patterning of the precur-sor materials within the polymer jet. Microgels as well as the electrospun non-woven mats were investigated to correlate the starting materials with the final morphology of the composite fibers. PNIPAAm and PNIPAAm/Chitosan thermosensitive microgels with different compositions were obtained via surfactant free emulsion polymerization (SFEP) and characterized in terms of chemical structure, morphology, thermal sta-bility, swelling properties and thermosensitivity. Finally, the colloidal electrospinning method was carried out from spinning solutions composed of the stable microgel dispersions (up to a concentration of about 35 wt. % microgels) and a polymer solution of PEO/water/ethanol mixture acting as fiber template solution. The confinement of microgels was confirmed by Scanning Electron Microscopy (SEM). The electrospinning process was statistically analysed providing the optimum set of parameters aimed to minimize the fiber diameter, which give rise to electrospun nanofibers of PNIPAAm microgels/PEO with a mean fiber diameter of 63 ± 25 nm.

As conversas informais na reconstituição

The theme of thid thesis is the water supply services contract. The texto starts with an analysis of the service, aimed at clarifying what is the system organization and the principles applicable to this essential public service. Then the water supply services contract is analyzed according to the law on essential public services. Subsequently, connections are established with other applicable laws and the differing doctrinal and jurisprudential perspectives are presented. The thesis ends with an outlook on the dispute resolution mechanisms at the users’ disposal.

Relatório de estágio no departamento central de investigação e acção penal

The means of obtaining evidence, the amount of evidence obtained, the number of defendants related to each criminal case and the gravity of the crimes for which the magistrates of the Department are holders of penal action, define its real importance to the Rule of Law. I have deeply studied the subject of the institution of hierarchical intervention required by the assistant and the application of an opening statement by the defendant, starting from a hypothetical case, provided when the query of an investigation with the subject of the crime of active corruption, where this institution was called as a reaction to the archiving dispatch delivered by the Public Ministry. I have study about the implementation of the institution of provisional suspension of the process, specifically in the scope of fiscal criminality, analyzing the effective satisfaction of the purposes of the sentences in two slopes: general prevention and special prevention. I went for my first time to a Central Court of Criminal Instruction, where I attended the measures of inquiry and instructive debate of a process that culminated with the prosecution and pronunciation of the defendants. In addition to this criminal experience, I have deepened and consolidated the academic knowledge with the study of various criminal cases from various fields in the scope of criminality investigated by the Department. I could therefore check the basis of procedural delays, regarding to our legal system, especially in this type of crime, raising issues that I analyzed and discussed, always in a critical and academic way. I had the opportunity to attend and witness a seminar in the Lisbon Directorate of Finance as well of entering the Centre for Judicial Studies to attend a conference on the International Anti-Corruption Day. Focus on the investigatory importance of the international judicial cooperation, through the various organs, with special interest to EUROJUST. I comprehended the organization and functioning of these communitarian organs and means of communication of procedural acts, in particular, the rogatory letters and european arrest warrants. This involvement is motivated by the moratorium factor of the investigations where rogatory letters are necessary for the acquisition of evidence or information relevant to the good continuation of the process. For this reason the judicial cooperation through the relevant communitarian organs, translates a streamlined response between the competent judicial authorities of the Member States, through the National Member that integrates EUROJUST. This report aims to highlight some of the difficulties and procedural issues that Public Prosecutors of DCIAP and criminal police bodies that assist them, face in combating violent and organized crime, of national and transnational nature, of particular complexity, according to the specifics of criminal types.

Aplicação das medidas de coacção às pessoas colectivas

1. Legal system of coercive measures and applicability to legal persons: the criminal liability of legal persons, application requirements, fundamental principles; 2. Inapplicability of personal freedom coercive measures to legal persons; 3. Application in the specific case of legal persons: term of identity and residence; provision of security, the obligation of periodic presentation, suspension of exercise of functions, activities and rights, conducts prohibitions and obligations; 4. Break of coercive measure imposed on the legal person.

Contratos de prestação de serviços de comunicações electrónicas

The object of this dissertation is the analysis of the legal framework applicable to contracts for provision of electronic communications services, while trying to offer solutions to some of the issues regarding this matter. The main focus of this study will be the rules concerning service’s suspension, which have been recently amended. The technological development and the establishment of these services as information transmitters and work tools were noteworthy for its growing importance at the present time. These services include cable television, telephone (landline and mobile) and internet and they are regulated by Law nr 23/96, July 26th, along with other essential public services. Said law sets a group of principles and duties, such as good faith (article 3), continuity and quality of the service (article 7) and the duty to rightfully inform the user (article 4), in order to protect the users. For the analysis of legal framework applicable to these particular contracts it is also fundamental to mention Law nr 5/2004, February 10th, known as Electronic Communications Law. The provisions regarding the service’s suspension are currently prescribed in articles 52.º and 52.º-A of the law. Given the amendments introduced by Law nr 10/2013, January 28th, consumers are subjected to a regulation different from the one applicable to the other users, established in the new article 52.º-A. From our analysis, we have concluded that the main change from past provisions has to do with the automatic termination of the contract as consequence of the consumer’s failure to pay the price or to conclude a written payment arrangement after service’s suspension.

A harmonização fiscal europeia

With this dissertation we aim to analyze the most relevant aspects of the excise duties harmonized regime, considering Community origins, but having also in attention all legal specifications of its implementation in Portugal. The legal regime of excise duties is presented as an ambitious theme, considering the challenge of different branches of law that influence this subject, such as Tax, Economic and Community laws, the inescapable influence of customs procedures, or regarding environmental objectives. In the European context, the harmonization of excise duties was seen as a condition for the implementation of the internal market, contributing to undo secular tax barriers between Member States and, since so, ensure fair competition and free movement of services and goods. Along with VAT, the excise duties harmonization process could represent a potential European tax system, essential for a full and integrated single market. In this context, it is essential to pay special attention to specific characteristics of excise duties regime, such as ‘duty suspension arrangement’ applicable during the production phase, storage and movement in certain conditions. The growing importance of excise duties, as for revenue or extra-fiscal purposes, recommends new academic studies on this subject, seeking new opportunities and challenges.

A continuous solvent- and oil-free method to prepare injectable PEGylated fibrinogen cell-laden microparticles

Injectable biomaterials with in situ cross-linking reactions have been suggested to minimize the invasiveness associated with most implantation procedures. However, problems related with the rapid liquid-to-gel transition reaction can arise because it is difficult to predict the reliability of the reaction and its end products, as well as to mitigate cytotoxicity to the surrounding tissues. An alternative minimally invasive approach to deliver solid implants in vivo is based on injectable microparticles, which can be processed in vitro with high fidelity and reliability, while showing low cytotoxicity. Their delivery to the defect can be performed by injection through a small diameter syringe needle. We present a new methodology for the continuous, solvent- and oil-free production of photopolymerizable microparticles containing encapsulated human dermal fibroblasts. A precursor solution of cells in photo-reactive PEG-fibrinogen (PF) polymer was transported through a transparent injector exposed to light-irradiation before being atomized in a jet-in-air nozzle. Shear rheometry data provided the cross-linking kinetics of each PF/cell solution, which was then used to determine the amount of irradiation required to partially polymerize the mixture prior to atomization. The partially polymerized drops fell into a gelation bath for further polymerization. The system was capable of producing cell-laden microparticles with high cellular viability, with an average diameter of between 88.1 µm to 347.1 µm and a dispersity of between 1.1 and 2.4, depending on the parameters chosen.

One-step in situ synthesis of polyamide microcapsules with inorganic payload and their transformation into responsive thermoplastic composite materials

Well-dispersed loads of finely powdered metals, metal oxides, several carbon allotropes or nanoclays are incorporated into highly porous polyamide 6 microcapsules in controllable amounts via an original one-step in situ fabrication technique. It is based on activated anionic polymerization (AAP) of ε-caprolactam in a hydrocarbon solvent performed in the presence of the respective micro- or nanosized loads. The forming microcapsules with typical diameters of 25-50 µm entrap up to 40 wt% of load. Their melt processing produces hybrid thermoplastic composites. Mechanical, electric conductivity and magnetic response measurements show that transforming of in situ loaded microcapsules into composites by melt processing (MP) is a facile and rapid method to fabricate materials with high mechanical resistance and electro-magnetic characteristics sufficient for many industrial applications. This novel concept requires low polymerization temperatures, no functionalization or compatibilization of the loads and it is easy to scale up at industrial production levels.

Hydrophobic/hydrophilic P(VDF-TrFE)/PHEA polymer blend membranes

Polymer blend membranes have been obtained consisting of a hydrophilic and a hydrophobic polymers distributed in co-continuous phases. In order to obtain stable membranes in aqueous environments, the hydrophilic phase is formed by a poly(hydrohyethyl acrylate), PHEA, network while the hydrophobic phase is formed by poly(vinylidene fluoride-co-trifluoroethylene) P(VDF-TrFE). To obtain the composites, in a first stage, P(VDF-TrFE) is blended with poly(ethylene oxyde) (PEO), the latter used as sacrificial porogen. P(VDF-TrFE)/PEO blend membranes were prepared by solvent casting at 70° followed by cooling to room temperature. Then PEO is removed from the membrane by immersion in water obtaining a P(VDF-TrFE) porous membrane. After removing of the PEO polymer, a P(VDF-TrFE) membrane results in which pores are collapsed. Nevertheless the pores reopen when a mixture of hydroxethyl acrylate (HEA) monomer, ethyleneglycol dimethacrylate (as crosslinker) and ethanol (as diluent) is absorbed in the membrane and subsequent polymerization yields hybrid hydrophilic/hydrophobic membranes with controlled porosity. The membranes are thus suitable for lithium-ion battery separator membranes and/or biostable supports for cell culture in biomedical applications.

Systematics, functional morphology and distribution of a bivalve (Apachecorbula muriatica gen. et sp. nov.) from the rim of the ‘Valdivia Deep’ brine pool in the Red Sea

The deep brine pools of the Red Sea comprise extreme, inhospitable habitats yet house microbial communities that potentially may fuel adjacent fauna. We here describe a novel bivalve from a deep-sea (1525 m) brine pool in the Red Sea, where conditions of high salinity, lowered pH, partial anoxia and high temperatures are prevalent. Remotely operated vehicle (ROV) footage showed that the bivalves were present in a narrow (20 cm) band along the rim of the brine pool, suggesting that it is not only tolerant of such extreme conditions but is also limited to them. The bivalve is a member of the Corbulidae and named Apachecorbula muriatica gen. et sp. nov. The shell is atypical of the family in being modioliform and thin. The semi-infaunal habit is seen in ROV images and reflected in the anatomy by the lack of siphons. The ctenidia are large and typical of a suspension feeding bivalve, but the absence of guard cilia and the greatly reduced labial palps suggest that it is non-selective as a response to low food availability. It is proposed that the low body mass observed is a consequence of the extreme habitat and low food availability. It is postulated that the observed morphology of Apachecorbula is a result of paedomorphosis driven by the effects of the extreme environment on growth but is in part mitigated by the absence of high predation pressures.

Poly(2-hydroxyethyl methacrylate): A new star polymer

Multiarm star polymers are attractive materials due to their unusual bulk and solution properties. They are considered analogues of dendrimers with a wide range of applications, such as drug delivery, membranes, coatings and lithography.1 The advent of controlled polymerization made possible the existence of this unique class of organic nanoparticles (ONPs).2 Two major synthetic strategies are usually employed in the preparation of star polymers, the core-first and arm-first approaches. The core-first approach involves a controlled living polymerization using a multiarm initiator core while the arm-first methodology is based in the quenching of living polymers with multifunctional coupling agent or bifunctional vinyl compounds. Herein, we present the synthesis and characterization of a new star polymer, the multiarm star poly(2-hydroxyethyl methacrylate). The tetra-armed star polymer was prepared by reversible addition fragmentation chain-transfer (RAFT) polymerization using the core-first approach. The RAFT chain-transfer agent (RAFT CTA) pentaerythritol tetrakis[2-(dodecylthiocarbonothioylthio)-2-methylpropionate] was used as multiarm initiator core were 2-hydroxyethyl methacrylate (HEMA) was polymerized using AIBN as radical initiator. Structural characterization was performed by 1H NMR and FTIR. The new polymer is able to uptake large quantities of organic solvents, forming gels. The rheological behavior of these gels was also investigated.

Laccase-catalyzed synthesis of conducting polyaniline-lignosulfonate composite

Enzymatic polymerization of aniline was first performed in lignosulfonate (LGS) template system. High-redox-potential catalyst laccase, isolated from Aspergillus, was used as a biocatalyst in the synthesis of conducting polyaniline/lignosulfonate (PANI-ES-LGS) complex using atmospheric oxygen as the oxidizing agent. The linear templates (LGS), also serving as the dopants, could facilitate the directional alignment of the monomer and improve the solubility of the conducting polymer. The process of the polymerization was monitored using UV-Vis spectroscopy, by which the conditions for laccase-catalyzed synthesis of PANI-ES-LGS complex were also optimized. The structure characterizations and solubility of the complex were carried out using corresponding characterization techniques respectively. The PANI-ES-LGS suspensions obtained was used as coating for cotton with a conventional padder to explore the applications of the complex. The variable optoelectronic properties of the coated cotton were confirmed by cyclic voltammetry and color strength test. The molecular weight changes of LGS treated by laccase were also studied to discuss the mechanism of laccase catalyzed aniline polymerization in LGS template system.

Desenvolvimento de microcápsulas ativadas por radiação solar para aplicação em painéis cerâmicos exteriores

Dissertação de mestrado integrado em Engenharia de Materiais