819 resultados para Subtropical values and principle
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Human activities have been driven land cover, provoking acceleration of the erosive process and alteration on the soil characteristics. To explore the effects of human disturbance, we investigated the influences of natural and anthropogenic features on soil quality and soil erosion indicators (EI) within a Brazilian rural watershed located in Bauru Municipality, State of So Paulo. A pre-established set of soil EI was used to evaluate the influence of anthropogenic land cover categories on the presence and severity of erosion, related with spatial variations of soil attributes. On-site visits were carried out to measure the occurrence and the intensity of eleven separate EI values and to collect undisturbed topsoil samples for subsequent analyses. We registered 17 occurrences of EIs, distributed in ten locals. Occurrence and intensity of EIs were related to degree of sheet erosion. The EI qualities were more strongly associated with land cover management practices than to local topographic features. The occurrence of EIs and characteristics of soil and soil organic matter (SOM) were not significantly self-correlated. Although land cover class seems to influence soil properties and SOM attributes, we observed that the granulometric composition of the soils also contributes to the structural characteristics of the soil and consequently to the dynamic loss and gain of soil carbon. Sites covered with natural remnant vegetation (NRV) store 96.5 Mg ha(-1) of C and grassy and tilled soils stored more C than NRV, 100.1 and 142.4 Mg ha(-1), respectively. Due to the influence of soil texture over the soil C dynamic, we observe that in Bauru, pastured areas have high potential for sequestration of C if factors such as fire and/or erosion were avoided or effectively controlled. Results from this study show that human disturbance substantially affects soil properties within of southeastern region of Brazil.
Resumo:
The grinding operation gives workpieces their final finish, minimizing surface roughness through the interaction between the abrasive grains of a tool (grinding wheel) and the workpiece. However, excessive grinding wheel wear due to friction renders the tool unsuitable for further use, thus requiring the dressing operation to remove and/or sharpen the cutting edges of the worn grains to render them reusable. The purpose of this study was to monitor the dressing operation using the acoustic emission (AE) signal and statistics derived from this signal, classifying the grinding wheel as sharp or dull by means of artificial neural networks. An aluminum oxide wheel installed on a surface grinding machine, a signal acquisition system, and a single-point dresser were used in the experiments. Tests were performed varying overlap ratios and dressing depths. The root mean square values and two additional statistics were calculated based on the raw AE data. A multilayer perceptron neural network was used with the Levenberg-Marquardt learning algorithm, whose inputs were the aforementioned statistics. The results indicate that this method was successful in classifying the conditions of the grinding wheel in the dressing process, identifying the tool as "sharp''(with cutting capacity) or "dull''(with loss of cutting capacity), thus reducing the time and cost of the operation and minimizing excessive removal of abrasive material from the grinding wheel.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
This study evaluated the effect of different dentifrices on the microhardness and surface roughness of composite surfaces covered by surface sealants. Samples of Filtek P60 were made and divided into groups, in accordance with surface treatments: G1 - Fortify; G2 - Fortify Plus; G3 - control (none). For Knoop microhardness evaluation, the specimens were placed in a microdurometer, under a load of 50 g for 15 sec. The analyses of surface roughness were carried out individually in a profilometer. The specimens were submitted to toothbrushing using dentifrices: Colgate Maximum Protection Anti-caries, Colgate Whitening or Sensodyne, diluted in distilled water (1:3) for 30 000 cycles. The results showed that the control group (G3) presented the highest microhardness values. The control group presented, before toothbrushing, the lowest surface roughness values, and after toothbrushing there were no differences among the experimental groups. The maintenance of the lowest values of microhardness demonstrated the effectiveness of these sealant materials to support the abrasive wear.
Resumo:
Coordenação de Aperfeiçoamento do Pessoal de Nível Superior (CAPES)
Resumo:
Analysis of genomic data is increasingly becoming part of the livestock industry. Therefore, the routine collection of genomic information would be an invaluable resource for effective management of breeding programs in small, endangered populations. The objective of the paper was to demonstrate how genomic data could be used to analyse (1) linkage disequlibrium (LD), LD decay and the effective population size (NeLD); (2) Inbreeding level and effective population size (NeROH) based on runs of homozygosity (ROH); (3) Prediction of genomic breeding values (GEBV) using small within-breed and genomic information from other breeds. The Tyrol Grey population was used as an example, with the goal to highlight the potential of genomic analyses for small breeds. In addition to our own results we discuss additional use of genomics to assess relatedness, admixture proportions, and inheritance of harmful variants. The example data set consisted of 218 Tyrol Grey bull genotypes, which were all available AI bulls in the population. After standard quality control restrictions 34,581 SNPs remained for the analysis. A separate quality control was applied to determine ROH levels based on Illumina GenCall and Illumina GenTrain scores, resulting into 211 bulls and 33,604 SNPs. LD was computed as the squared correlation coefficient between SNPs within a 10 mega base pair (Mb) region. ROHs were derived based on regions covering at least 4, 8, and 16 Mb, suggesting that animals had common ancestors approximately 12, 6, and 3 generations ago, respectively. The corresponding mean inbreeding coefficients (F ROH) were 4.0% for 4 Mb, 2.9% for 8 Mb and 1.6% for 16 Mb runs. With an average generation interval of 5.66 years, estimated NeROH was 125 (NeROH>16 Mb), 186 (NeROH>8 Mb) and 370 (NeROH>4 Mb) indicating strict avoidance of close inbreeding in the population. The LD was used as an alternative method to infer the population history and the Ne. The results show a continuous decrease in NeLD, to 780, 120, and 80 for 100, 10, and 5 generations ago, respectively. Genomic selection was developed for and is working well in large breeds. The same methodology was applied in Tyrol Grey cattle, using different reference populations. Contrary to the expectations, the accuracy of GEBVs with very small within breed reference populations were very high, between 0.13-0.91 and 0.12-0.63, when estimated breeding values and deregressed breeding values were used as pseudo-phenotypes, respectively. Subsequent analyses confirmed the high accuracies being a consequence of low reliabilities of pseudo-phenotypes in the validation set, thus being heavily influenced by parent averages. Multi-breed and across breed reference sets gave inconsistent and lower accuracies. Genomic information may have a crucial role in management of small breeds, even if its primary usage differs from that of large breeds. It allows to assess relatedness between individuals, trends in inbreeding and to take decisions accordingly. These decisions would be based on the real genome architecture, rather than conventional pedigree information, which can be missing or incomplete. We strongly suggest the routine genotyping of all individuals that belong to a small breed in order to facilitate the effective management of endangered livestock populations.
Resumo:
Aim To analyse the local regulatory mechanisms of osteoclastogenesis and angiogenesis during the progression of periapical lesions in female rats with oestrogen deficiency and treatment with raloxifene (RLX). Methodology Female Wistar rats were distributed into groups: SHAM-veh, subjected to sham surgery and treated with a vehicle; OVX-veh, subjected to ovary removal and treated with a vehicle; and OVX-RLX, subjected to ovary removal and treated with RLX. Vehicle or RLX was administered orally for 90 days. During treatment, the dental pulp of mandibular first molars was exposed to the oral environment for induction of periapical lesions, which were analysed after 7 and 30 days. After the experimental periods, blood samples were collected for measurement of oestradiol, calcium, phosphorus and alkaline phosphatase. The rats were euthanized and the mandibles removed and processed for immunohistochemical detection of receptor activator of nuclear factor kappa-B ligand (RANKL), osteoprotegerin (OPG), hypoxia-inducible factor-1 alpha (HIF-1α) and bone-specific alkaline phosphatase (BALP). Data were compared using Kruskal–Wallis followed by Dunn test (nonparametric values) and anova followed by the Tukey's test (parametric values). Results The plasma concentration of oestradiol showed hypo-oestrogenism in the rats subjected to ovary removal. On day 7, alkaline phosphatase activity, calcium and phosphorus were higher in the OVX-RLX group than in the OVX-veh group (P < 0.001), but immunolabelling for RANKL and HIF-1α was lower in OVX-RLX group (P < 0.001). On day 30, the OVX-veh group had higher immunolabelling for RANKL than the OVX-RLX group (P < 0.05). There were no significant differences in the immunoreactivity of OPG and BALP between any groups at either time-point (P > 0.05). Conclusion RLX therapy reversed the increased levels of the local regulators of both osteoclastogenesis and angiogenesis induced by oestrogen deficiency.
Resumo:
The aim of this study was to investigate the rheological properties and antibacterial efficacy of chitosan/ alpha-hydroxy acids (lactic acid and glycolic acid) and cellulose polymers, both in hydrogels, in order to produce a formulation with improved activity against Propionibacterium acnes and Staphylococcus aureus, which can potentially be used in the treatment of acne. The rheological characterisation of the hydrogels was examined using continuous shear and viscoelastic creep. The antibacterial activities of formulations were performed by the well diffusion and broth microdilution. The hydrogels formulated with only chitosan showed pseudoplastic behavior while the chitosan hydrogels with cellulose polymers presented viscoelastic properties. The antibacterial activity was proportional to AHA and chitosan concentration. It was enhanced at low pH values and with high molecular weight chitosan and did not change with the incorporation of two cellulose polymers. The antibacterial mechanism of chitosan has currently been hypothesized as being related to surface interference. The results show that chitosan - based hydrogels containing AHA and cellulose polymers are viscoelastic,indicating good applicability onto the skin, and they present bacterial activity under various experimental conditions.
Resumo:
Superlattices formed of two antagonic characteristics have been broadly studied in literature mainly in order to clarify the effects of proximity and interface interactions. Here, we present a study of superlattice introducing an insulator between each superconducting and ferromagnetic layer. The electrical insulator STO, YBCO and LCMO layer are deposited by PLD method. The samples with STO show more intergrowth surface morphology, which favors the application providing better contacts between the grains. The magnetic measurements indicated higher Tc values and high anisotropy for SLs with STO, which is dependent on the relative thickness of LCMO and YBCO.
Resumo:
Pós-graduação em Pesquisa e Desenvolvimento (Biotecnologia Médica) - FMB
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)