1000 resultados para Submaximal strength


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Objectives
The purpose of this study was to investigate the bond strength of apatite layer on titanium (Ti) substrate coated by biomimetic method and to improve the bonding of apatite layer to Ti substrate by optimizing the alkali heat-treatment process.

Methods
Ti plates pre-treated with an alkali solution of 10 M sodium hydroxide (NaOH) were heat-treated at 600 °C for 1 h at different atmospheres: in air and in vacuum. A dense apatite layer formed on top of the sodium titanate layer after soaking the alkali and heat-treated Ti samples in simulated body fluid (SBF) for up to 3 weeks. The bond strengths of the sodium titanate layer on Ti substrate, and apatite layer on the sodium titanate layer, were measured, respectively, by applying a tensile load. The fracture sites were observed with a scanning electron microscope (SEM).

Results
The apatite layer on the substrate after alkali heat-treatment in air achieved higher bond strength than that on the substrate after alkali heat-treatment in vacuum. It was found that the interfacial structure between the sodium titanate and Ti substrate has a significant influence on the bond strength of the apatite layer.

Significance
It is advised that titanium implants can achieve better osseointegration under load-bearing conditions by depositing an apatite layer in vivo on a Ti surface subjected to alkali and heat-treated in air.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A questionnaire was completed by 98 Muslim and 91 non-Muslim Australian  women to examine the relationship between Islam and body image. Path analyses revealed that for Muslim women (but not non-Muslim women) strength of religious faith was inversely related to body dissatisfaction, body self-objectification, and dietary restraint. These relationships were mediated by increased use of modest clothing and by reduced media consumption. These results are consistent with the proposition that adherence to Islam can indirectly protect women's body image from appearance-based public scrutiny and from exposure to Western media.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this paper, an algorithm for approximating the path of a moving autonomous mobile sensor with an unknown position location using Received Signal Strength (RSS) measurements is proposed. Using a Least Squares (LS) estimation method as an input, a Maximum-Likelihood (ML) approach is used to determine the location of the unknown mobile sensor. For the mobile sensor case, as the sensor changes position the characteristics of the RSS measurements also change; therefore the proposed method adapts the RSS measurement model by dynamically changing the pass loss value alpha to aid in position estimation. Secondly, a Recursive Least-Squares (RLS) algorithm is used to estimate the path of a moving mobile sensor using the Maximum-Likelihood position estimation as an input. The performance of the proposed algorithm is evaluated via simulation and it is shown that this method can accurately determine the position of the mobile sensor, and can efficiently track the position of the mobile sensor during motion.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Two glaring omissions in the research on sports fans are on women fans and on how people become fans. In this paper we begin to address both of these issues by examining how women become fans of Australian rules football (AFL). From data generated in single-person and focus group interviews with women AFL supporters conducted in Victoria and NSW, we use their accounts to map-out four ways in which they became fans. We show that at the heart of each of these paths to fandom are the close ties that the women formed in their social networks – either as children through their kin, or later in life through others that entered their networks. Women become fans, we argue, because of the strong social ties that they have with people who are existing fans.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Car manufacturers are under pressure to reduce vehicle mass while maintaining comfort and passenger safety for current and future vehicles. To meet this demand the steel industry has developed Advanced High Strength Steels (AHSS) that promise higher strength and improved formability compared to conventional steel grades. Even though significant research has already been performed to evaluate the material properties and forming behaviour of most AHSS types, only a limited literature is available on their necking and fracture behaviour and the effect on formability. This paper examines and compares the thinning, necking and fracture behaviour of two AHSS and one conventional steel type, namely TRIP, DP and HSLA. Uniaxial, plane and biaxial strain conditions are investigated by tensile, cup drawing and stretch forming tests and by using numerical methods. The test results indicate that significant differences exist in necking and fracture behaviour between all three steel types.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Introduction: Obesity is thought to be a protective factor for bones in adults but not in children based on the evidence of the greater incidence of forearm fractures in obese children. Our objective was to investigate the effect of adiposity on bone strength in relation to the mechanical challenge placed onto the forearm bones in case of a fall.

Methods: Cross sectional areas (CSA) were obtained at the mid- and distal radius by peripheral quantitative computed tomography in 486 children (241 boys), mean age 8.3 years (range 6.9–9.7), participating in the LOOK Project. The following parameters were measured: bone mass and bone CSA (both sites), and muscle and fat CSA (mid-forearm only). Bone strength indices combining bone size and total volumetric density were calculated at each site.

Results/Discussion: Overweight children (BMI > percentile equivalent to 25 kg/m2 in adults) have higher bone parameters than normal-weight peers (Z-scores +0.6 to +0.9SD, p < 0.0001). These differences disappear after adjustment for muscle CSA. Adiposity (fat CSA/muscle CSA) was negatively correlated with bone mass, size and strength at the distal radius only (r = −0.1, p < 0.05). After adjustment for body weight (estimate of the load during a fall), the negative correlations were stronger and observed at both the mid- and distal radius (r = −0.37 to −0.55, p < 0.0001).

Conclusion. Overweight children have stronger bones due to greater muscle size. However, children with high fat mass relative to muscle mass (increased adiposity) have poorer bone strength, independent of weight, which may contribute to the increased risk of fracture in obese children.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study determined whether a previous laboratory finding relating platform elevation to rock strength could be verified when tested in the field. Testing took place along the Otway coast in southeastern Australia. Fourteen platforms were profiled using a total station while rock strength tests were performed with a type L Schmidt hammer. Results established that higher mean platform elevation correlated with increased rock strength (r = 0.661, p < 0.05). This confirmed that a relation exists between elevation and rock strength when tested in the field. This finding has implications for the interpretation of shore platforms and marine terrace elevations in relation to sea level.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Purpose : This study examined whether a community-based progressive resistance strength training programme could improve muscle strength and functional activity in a group of adults with cerebral palsy with high support needs.

Method : Using a single group pre-post clinical design, 10 adults (7 males, 3 females; mean age 47.8 SD 5.7 years) with cerebral palsy and high support needs completed 4 weeks of introduction and familiarization, followed by a 10-week progressive resistance strength training programme in a community gymnasium. Participants were measured for muscle strength, locomotion speed and timed sit-to-stand.

Results : After establishment of a stable baseline from weeks 2 to 5 with no systematic change and a high degree of association ( r  > 0.86), participants increased leg strength by 22.0% ( p  = 0.02), arm strength by 17.2% ( p  = 0.01) and improved performance of sit-to-stand ( p  = 0.02) during the 10-week strength training intervention.

Conclusions : This study adds to the accumulating evidence that strength training can be beneficial for people with cerebral palsy by demonstrating benefits for adults with cerebral palsy and high support needs who are subject to decline in physical function associated with the ageing process.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Purpose: To explore the positive and negative perceptions of participating in a strength- training programme for adults with cerebral palsy.

Method: Ten adults aged over 40 years with cerebral palsy participated in a group-based 10-week progressive resistance strength-training programme in a community gymnasium. After the programme, each participant was interviewed using an in-depth semi-structured format and the results coded thematically.

Results: Participants perceived that their strength, and ability to perform everyday activities had improved. However, the main benefit for participants was enjoyment and social interaction. The only negative perceptions related to fatigue, short-term muscle soreness and a feeling that they had not improved as much as they had expected.

Conclusions: Enjoyment, a factor that can promote adherence and sustainability, was a key benefit of this strength-training programme for adults with cerebral palsy that led to perceptions of increased strength and physical functioning. These findings suggest that exercise programmes for adults with cerebral palsy should be conducted in a group in the community, thereby promoting community inclusion. In addition, it is important to provide education to participants about the normal responses and expectations of an exercise programme.