A preliminary assessment of water quality in fish cages on Lake Kariba, Zimbabwe

The water quality in fish cages on Lake Kariba was studied. The Kruskal-Wallis test was used to determine whether the water quality parameters differed significantly among the cage-types (cage-type effect). Secchi disc readings ranged from 2 to 4 metres, while temperature ranged from 23 degree C to 29.5 degree C. The observed conductivity was between 98.7 mu S/cm and 102.3 mu S/cm. The pH was between 6.31 and 7.82. Concentrations of dissolved oxygen varied from 1.55 to 6.47 mg/l, while dissolved oxygen saturation ranged from 22.3% to 83.1%. Within the same month, temperature did not differ significantly among cages. Conductivity, pH, dissolved oxygen concentration and dissolved oxygen saturation differed significantly among the 3 cage-types. Temperature and pH levels in the cages were close to the optimum levels for the culture of cichlids. Sub-optimal levels of dissolved oxygen occurred occasionally in the octagonal cages.

Exploitation and reproduction of the spotted eagle ray (Aetobatus narinari) in the Los Frailes Archipelago, Venezuela

We studied a small artisanal fishery for the spotted eagle ray (Aetobatus narinari) off Margarita Island in northeastern Venezuela. We analyzed data from 413 fishing trips directed at A. narinari over a 29-month sampling period (August 2005–December 2007). These trips yielded 55.9 metric tons and 1352 individuals from which a subsample of 846 females and 321 males was used for biological data. Maximum fishing effort and landings occurred between February and May, and catch per unit of effort was highest between December and February and between July and October with an overall average of 3 individuals and 133 kg per trip. The overall sex ratio was significantly different from 1:1 with a predominance of females. Females ranged in size with disc widths (DW) from 64 to 226 cm. Males ranged in size between 97 and 190 cm DW. There was no statistically significant difference between male and female length-weight relationships. Mean fecundity was estimated at 3.09 embryos per female, and the largest embryo measured 44.5 cm DW. Females in different maturity stages were found in all months, except November 2007, the month when all females were immature. Postgravid females occurred mainly during the periods of January–May and July–October. Mean length (L50) at maturity was estimated at 129.2 cm DW for males and 134.9 cm DW for females. This study provides much needed information on the biology and life history of A. narinari for the management of an intensive, directed, small-scale fishery for this little known species in northeastern Venezuela.

Caracterização ambiental preliminar de um sistema rio estuário tropical em área de Mata Atlântica, Ilha Grande (RJ).

O presente trabalho visa contribuir para a valorização e conservação dos cursos dágua e biodiversidade em área de Mata Atlântica no Estado do Rio de Janeiro, através da caracterização ambiental preliminar do sistema rio - estuário Córrego Andorinhas, localizado no Parque Estadual da Ilha Grande (RJ), utilizando indicadores abióticos e bióticos. As amostragens ocorreram de 20/10/11 a 22/10/11, pela manhã e tarde, em duas profundidades de três estações. O fitoplâncton e protozooplâncton foram coletados com frascos de polipropileno (500 ml), fixados com formaldeído 2% neutralizado com bórax e analisados em câmaras de sedimentação de Uthermöl. O zooplâncton foi coletado com rede de 68 μm de malha, fixado com formaldeído 4% neutralizado com bórax e analisado em subamostras. Variáveis abióticas foram analisadas in situ com sondas. Os nutrientes foram coletados com garrafa de Van Dorn e frascos de polipropileno, congeladas e levadas para análise no laboratório de Geoquímica da UFF. A estação AN-01 apresentou menores valores de temperatura da água (19 C), condutividade (2,3 μS/cm) e turbidez (1,1 UNT), mas com maiores valores de OD (9,6 mg/L). Maiores valores de turbidez (6,9 UNT) e pH (7,7) foram registrados na estação AN-02, enquanto a estação AN-03 apresentou maiores valores de temperatura da água (23,7 C) e condutividade (1951 μS/cm). O fitoplâncton apresentou valores máximos nas estações AN-02 manhã em 22/10/11 (4,28 x 103 ind/L) e AN-03 tarde em 20/10/11(3,4 x 103 ind/L). O zooplâncton apresentou valores máximos na estação AN-03 manhã (421,2 x 103 ind/L) e tarde (45,8 x 103 ind/L). Os valores máximos registrados para protozooplâncton foram registrados nas estações AN-02 manhã em 22/10/11 (35,1 x 103 ind/L) tarde em 21/10/11 (12,6 x 103 ind/L). A partir dos dados abióticos, caracterizou-se o sistema como oligo-mesotrófico, com características distintas em seus pontos de coleta: A dominância de sarcodinos, diatomáceas e calanóides, em riqueza e densidade, demonstram o caráter estuarino, pois protozoários são indicadores de ambientes lóticos continentais, calanóides de ambientes marinhos e diatomáceas representantes de ambos os ambientes. Este estudo preliminar demonstrou a integridade ambiental do estuário, fato que reflete em sua preservação e da Mata Atlântica em seu entorno.

Comportamento tribocorrosivo do aço inoxidável e de ligas de titânio em meio salino

No presente trabalho, foram realizados ensaios de tribocorrosão no aço inoxidável AISI 304L, no titânio comercialmente puro (CPTi) e na liga de titânio Ti6Al4V em solução aquosa de 0,90% m/v NaCl. Amostras de ligas de titânio com tratamento térmico superficial de refusão a laser também foram utilizadas. Um tribômetro do tipo pino-no-disco com contracorpo de alumina foi usado. Técnicas eletroquímicas in situ de monitoramento em circuito aberto, espectroscopia de impedância eletroquímica, curvas de polarização e amperimetria de resistência nula foram empregadas. Os resultados obtidos indicam que o desgaste tribocorrosivo das ligas de titânio é mais intenso do que o observado no aço inoxidável, apresentando perfis de superfície mais irregulares. A análise da impedância eletroquímica mostrou que todos os materiais utilizados apresentam uma rápida recuperação da camada passiva, exibindo módulos e fases um pouco menores do que os medidos antes do desgaste. Sob atrito, os diagramas de impedância apresentam uma forte redução do módulo. Sob desgaste, o expoente α do elemento de fase constante (CPE) atinge seu valor mais baixo, enquanto o parâmetro γ é máximo. As curvas de polarização exibem potenciais menores e densidades de corrente de corrosão maiores durante o desgaste. O tratamento de refusão a laser, embora mude a microestrutura e a dureza superficial das amostras, não indica uma mudança aparente nos parâmetros eletroquímicos sob tribocorrosão, bem como do coeficiente de atrito. Nos ensaios de amperimetria de resistência nula, foi possível estimar a corrente mensurada no ARN por meio do emprego de um circuito elétrico equivalente. A densidade espectral de potência dos sinais de potencial e de corrente exibe a frequência de rotação (1,25 Hz) e seus harmônicos. Para baixas frequências (abaixo de 10 mHz), o decaimento obedece à relação 1 ⁄ e 1⁄ para os sinais de potencial e corrente, respectivamente.

Oak Mere continuous monitoring summary report, 1997 to 2000

This is the Oak Mere continuous monitoring summary report, 1997 to 2000 from the Environment Agency North West. This report focuses on the continuous monitoring programme made by a multi -parameter probe in Oak Mere since summer 1997. From 1999 nutrient and chlorophyll samples were taken when the water quality instrument was serviced. Water level measurements were made since 1998. Moreover, the report shows a summary Oak mere water quality of each year (1997-2000). The physico-chemical parameters and nutrient levels included are: temperature, specific conditions, dissolved oxygen, pH, Depth, secchi disc measurements, chlorophyll a, total Phosphorus, orto-Phosphate, Nitrate, Ammonia, and Silicate.

Análise dos aspectos biológicos e epidemiológicos de cepas de Escherichia coli associadas à infecção do trato urinário (ITU)

A invasão de bactérias no trato urinário caracteriza a infecção do sistema urinário. A Escherichia coli é o principal microrganismo associado a esta infecção devido a sua importância em causar ITU, recebeu a denominação de UPEC (Escherichia coli uropatogênica). No presente trabalho pesquisamos em 50 cepas de UPEC, inicialmente isolados de urina de pacientes ambulatoriais com infecções sintomática ou assintomática, a presença de 7 fatores de virulência, através das técnicas de PCR simples e multiplex para verificação dos genes que codificam adesinas P (pap) , fímbria S (sfa), adesina afimbrial (afa), sideroforo (aerobactina- aer), toxinas fator necrotizante citotóxico (cnf) e alfa-hemolisinas (hly), proteína de membrana (traT); ilhas de patogenicidade (virulência) através do marcador PAI. O marcador pCVD432 de EAEC também foi pesquisado nestas amostras. O método difusão em disco foi o utilizado para a determinação dos testes de susceptibilidade aos antimicrobianos. Podemos observar duas faixas etárias de maior incidência de ITU entre as mulheres: 19 a 35 anos, e acima de 50 anos. Sessenta e oito por cento das amostras apresentaram pelo menos um fator de virulência, onde os genes traT (54%) e aer (34%) foram os mais prevalentes. A sequência pCVD432 foi detectado em 6 amostras. No entanto, no ensaio de adesão em células Hep-2, doze amostras não apresentaram aderência (NA 24%). Nas 38 cepas restantes, 24 (48%) apresentaram aderência agregativa (AA). Observamos aderência sem padrão típico (SPT) em 48% das amostras, tendo sido dividido em discreto (SPT-D 22%), moderado (SPT-M 18%) e intenso (SPT-I 8%). Notamos os seguintes perfis de resistência para os antimicrobianos testados: ampicilina (44%), gentamicina (8%), nitrofurantoína (2%), norfloxacino (18%) e sulfametozaxol-trimetoprima (34%).

Mortality and movement of Yellowtail Flounder (Limanda ferruginea) tagged off New England

From 2003 to 2006, 44,882 Yellowtail Flounder (Limanda ferruginea) were captured and released with conventional disc tags in the western North Atlantic as part of a cooperative Yellowtail Flounder tagging study. From these releases, 3767 of the tags were recovered. The primary objectives of this tagging program were to evaluate the mortality and large-scale movement of Yellowtail Flounder among 3 stock areas in New England. To explore mortality, survival and recovery rate were estimated from traditional Brownie tag-recovery models fitted to the data with Program MARK. Models were examined with time and sex-dependent parameters over several temporal scales. The models with a monthly scale for both survival and recovery rate had the best overall fit and returned parameter estimates that were biologically reasonable. Estimates of survival from the tag-recovery models confirm the general magnitude of total mortality derived from age-based stock assessments but indicate that survival was greater for females than for males. In addition to calculating mortality estimates, we examined the pattern of release and recapture locations and revealed frequent movements within stock areas and less frequent movement among stock areas. The collaboration of fishermen and scientists for this study successfully resulted in independent confirmation of previously documented patterns of movement and mortality rates from conventional age-based analyses.

Observations on the mating behavior, spawn mass and larval development of Hydatina physis Linne, 1758 (Cephalaspidea: Hydatinidae) from Karachi

Reproduction of Hydatina physis was studied in a population from Karachi, Pakistan, including mating and egg laying behavior, spawn characteristics and development.Individuals first appear in the field in October and remain until March. The spawning occurs from mid-November till mid-February with a peak in December. During this period the individuals were also observed pairing. In captivity, mating lasts for 30 minutes, second mating occurs two days later. Oviposition occurs in a very interesting and unusual manner. The mother turns "up-side-down" with its food fully expanded and the shell completely hidden underneath, the expanded foot serves as protective cover to the eggs. Eggs are deposited in a complexly folded mass with a short stem and an adhesive disc. Capsules, arranged in a single layer, contain 4-6 eggs each of wich is 70 um in diameter. Development is planktotrophic and veligers hatch after 14 days at a temperature of 26-28 degrees Celsius.

INFLUENCE OF ATMOSPHERIC HUMIDITY ON THE ABRASIVE WEAR OF METALS.

A pin-on-disc apparatus has been used to obtain continuous simultaneous measurements of the wear and friction (sliding force) behaviour of metals on bonded silicon carbide abrasive paper under conditions of controlled humidity. Iron, mild steel, and copper exhibit qualitatively similar wear behaviour; the wear rate decreases progressively with the number of passes over the same track. In contrast, the wear rate of titanium remains constant. Variation in atmospheric humidity has little effect on the wear rates of copper or titanium, although a slight effect was found in mild steel and iron. Refs.

INFLUENCE OF ATMOSPHERIC COMPOSITION ON THE ABRASIVE WEAR OF TITANIUM AND Ti-6Al-4V.

A pin-on-disc apparatus has been used to investigate the wear and friction (sliding force) behavior of metals on bonded silicon carbide and alumina papers under conditions of controlled atmospheric composition. The wear rates of both commercial purity titanium and the alloy Ti-6%Al-4%V tested in air were found to remain constant with time, in contrast with the behavior of other metals tested under similar conditions, which exhibited a progressive decrease in wear rate with increasing number of passes along the same track. It is proposed that the concentration of interstitial nitrogen and oxygen in the worn metal surface, which largely determines its mechanical properties, strongly influences both the ductility of the abraded material and the force of adhesion between the metal and the abrasive particles. Parallels are drawn between abrasive wear and machining to illustrate the importance of oxygen at the interface between workpiece and tool surfaces.

Abrasive wear of steel during rolling-sliding contact with rock counterfaces

In many mining operations (e.g. excavation, drilling, tunnelling, rock crushing) metallic components are forced against abrasive rocks in a complex motion. This study examines the relative importance of combined rolling and sliding motion in the two-body abrasive wear of a low carbon tempered martensitic steel against rock counterfaces. A novel wear test rig has been used to vary the amount of rolling and sliding motion between a rotating steel cylinder and a counter-rotating sandstone (highly abrasive) or limestone (much less abrasive) disc. Weight-loss measurements reveal that the wear rate of the steel increases as the amount of motion against the rock counterface is reduced from pure sliding to approximately 50% sliding (and approximately 50% rolling). Scanning electron microscopy shows that when the amount of motion is reduced from pure sliding to approximately 50% sliding the topographical and sub-surface physical properties of the worn steel and rock surfaces are modified.

A comparison of different failure assessment methodologies applied to the NESC-1 test

Predictions for a 75x205mm surface semi-elliptic defect in the NESC-1 spinning cylinder test have been made using BS PD 6493:1991, the R6 procedure, non-linear cracked body finite element analysis techniques and the local approach to fracture. All the techniques agree in predicting ductile tearing near the inner surface of the cylinder followed by cleavage initiation. However they differ in the amount of ductile tearing, and the exact location and time of any cleavage event. The amount of ductile tearing decreases with increasing sophistication in the analysis, due to the drop in peak crack driving force and more explicit consideration of constraint effects. The local approach predicts a high probability of cleavage in both HAZ and base material after 190s, while the other predictions suggest that cleavage is unlikely in the HAZ due to constraint loss, but likely in the underlying base material. The timing of this event varies from ∼150s for R6 predictions to ∼250-300s using non-linear cracked body analysis.

The influence of water-miscible solvents on the permeability of clay

Centrifuge tests were carried out to determine the effect of 5 different water-soluble chemicals on a thin consolidated disc of clay. The evolution of changes in the clay permeability with time was investigated and other structural changes due to chemical attack were monitored. The findings presented here demonstrate that the permeability of the clay appear to be generally related to the polarity of the chemicals and the dielectric constant, with the exception of Butanol. In the case of Butanol at low flow rate and low stress level, the action of the chemical caused the clay to crack, with a consequent large increase in flow.

Bi-annual environment monitoring technical report for the SON cage fish culture site at Bugungu, Napoleon Gulf, northern Lake Victoria, December 2012

The first year-round quarterly surveys were completed for the year 2011. For the year 2012, SON management decided to change the frequency of the surveys from quarterly to biannual and the first such survey, was undertaken in June 2012. The second survey was undertaken in December 2012 and is the subject of this report: Results/observations made are presented in this technical report along with a scientific interpretation and discussion of the results with reference to possible impacts of the cage facilities to the water environment and aquatic biota. SON cage study sites were coded as downstream of cages (DSC), within cages (WIC) and upstream of cages (USC). Physical-chemical parameters (water column temperature, dissolved oxygen, pH, conductivity, were measured in-situ with a pre-calibrated hydrolab at each site. A digital Echo Sounder was used to determine the total water column depth at each site. A black and white Secchi disc was used to determine water column transparency. Coordinate locations were determined with a GPS device.

A novel measurement of dynamic friction

A tribometer, based on a pin-on-disc machine, uses a PZT drive to produce small sinusoidal fluctuations of sliding speed. The frequency and amplitude of these fluctuations can be controlled, and the dynamic response measured. Preliminary test results show that the dynamic friction variation is influenced by the contact materials, normal force, oscillation frequency and steady sliding speed. The variation of friction force amplitude and phase with frequency gives clues about the underlying state variables determining the friction. Modelling studies illustrate the expected behaviour for idealized friction laws governed by, for example, sliding speed, contact temperature, and "rate-state" laws. © 2008 SAE International.