Lead accumulation by hammerhead shark, Sphyrna couardi (C.) off Lagos coast, Nigeria

Levels of concentration of lead in the hammerhead shark, Sphyrna couardi, off the Lagos Coast of Nigeria were investigated. The standard length of the specimens examined ranged from 31.4cm to 47.2cm while the weights ranged from 451.5 to 1,667g. The lead concentration ranged from 0.11 degree kg/G to 0.38 degree kg/G. The mean lead concentration was 0.56 degree kg/G (dry weight). The gill has the highest lead concentration. There was no linear correlation between the length and weight and the amount of lead concentrated

Relation between TMAOase activity and content of formaldehyde in fillet minces and bellyflap minces from gadoid fishes

Minced fish is a significant component of a number of frozen fishery products like fish fingers, cakes and patties. Predominately minced fish is produced from gadoid species (Alaska pollack, cod, saithe, hake and others) possessing the enzyme trimethylamine oxide demethylase (TMAOase, E.C. 4.1.2.32) (Rehbein and Schreiber 1984). TMAOase catalyses the degradation of trimethylamine oxide (TMAO) to formaldehyde (FA) and dimethylamine (DMA), preferentially during frozen storage of products (Hultin 1992). In most gadoid species light muscle contains only low activity of TMAOase, the activity of red muscle and bellyflaps being somewhat higher. In contrast, the TMAOase activity in blood, kidney and other tissues, residues of which may contaminate minced fish flesh, may be higher for several orders of magnitude (Rehbein and Schreiber 1984).

Optimización del Lead Time de vehículos mediante la implementación de una solución RTLS (Real Time Location System)

A lo largo de este documento, se va a explicar la implantación del proyecto que he realizado basado en la localización de vehículos en la fábrica de Mercedes Benz España situada en Vitoria-Gasteiz. Durante la realización de este proyecto, se han llevado a cabo diversos estudios con el fin de conseguir la correcta implantación de las tecnologías empleadas. Se han realizado diferentes alternativas de posicionamiento de los componentes y diversas pruebas para comprobar el correcto funcionamiento de la solución. La solución del proyecto se realizará en distintas fases. La primera de ellas tratará sobre el estudio en una determinada zona de la fábrica, más concretamente la denominada “Área Técnica”, en esta zona se encuentran los vehículos que sufren algún retoque una vez están montados, esta zona se utilizará como piloto para una vez finalizado y comprobado su éxito ampliar la solución al resto de zonas. Previamente a mi incorporación se realizó un estudio para la colocación de los elementos necesarios en esta zona y se ha visto las posibilidades y beneficios que aportaría el control de los vehículos dentro de la fábrica. La siguiente fase será implantar la solución en el resto de las áreas que se encuentran dentro de la fábrica de Vitoria-Gasteiz así como la instalación de unos dispositivos que estarán ubicados en las puertas. Estos ayudarán a mejorar la ubicación de los vehículos ya que podremos conocer si los vehículos se encuentran dentro o fuera de la fábrica. Finalmente se ha realizado la integración de la solución en los sistemas actuales que utilizan en la fábrica para la gestión de los vehículos durante su ciclo de vida.

Noninterferometric measurement of lead zirconate titanate inverse piezoelectric extension

A noncontacting and noninterferometric depth discrimination technique, which is based on differential confocal microscopy, was used to measure the inverse piezoelectric extension of a piezoelectric ceramic lead zirconate titanate actuator. The response characteristics of the actuator with respect to the applied voltage, including displacement, linearity, and hysteresis, were obtained with nanometer measurement accuracy. Errors of the measurement have been analyzed. (C) 2001 Society of Photo-Optical Instrumentation Engineers.

New directions in sparse sampling and estimation for underdetermined systems

A central objective in signal processing is to infer meaningful information from a set of measurements or data. While most signal models have an overdetermined structure (the number of unknowns less than the number of equations), traditionally very few statistical estimation problems have considered a data model which is underdetermined (number of unknowns more than the number of equations). However, in recent times, an explosion of theoretical and computational methods have been developed primarily to study underdetermined systems by imposing sparsity on the unknown variables. This is motivated by the observation that inspite of the huge volume of data that arises in sensor networks, genomics, imaging, particle physics, web search etc., their information content is often much smaller compared to the number of raw measurements. This has given rise to the possibility of reducing the number of measurements by down sampling the data, which automatically gives rise to underdetermined systems.

In this thesis, we provide new directions for estimation in an underdetermined system, both for a class of parameter estimation problems and also for the problem of sparse recovery in compressive sensing. There are two main contributions of the thesis: design of new sampling and statistical estimation algorithms for array processing, and development of improved guarantees for sparse reconstruction by introducing a statistical framework to the recovery problem.

We consider underdetermined observation models in array processing where the number of unknown sources simultaneously received by the array can be considerably larger than the number of physical sensors. We study new sparse spatial sampling schemes (array geometries) as well as propose new recovery algorithms that can exploit priors on the unknown signals and unambiguously identify all the sources. The proposed sampling structure is generic enough to be extended to multiple dimensions as well as to exploit different kinds of priors in the model such as correlation, higher order moments, etc.

Recognizing the role of correlation priors and suitable sampling schemes for underdetermined estimation in array processing, we introduce a correlation aware framework for recovering sparse support in compressive sensing. We show that it is possible to strictly increase the size of the recoverable sparse support using this framework provided the measurement matrix is suitably designed. The proposed nested and coprime arrays are shown to be appropriate candidates in this regard. We also provide new guarantees for convex and greedy formulations of the support recovery problem and demonstrate that it is possible to strictly improve upon existing guarantees.

This new paradigm of underdetermined estimation that explicitly establishes the fundamental interplay between sampling, statistical priors and the underlying sparsity, leads to exciting future research directions in a variety of application areas, and also gives rise to new questions that can lead to stand-alone theoretical results in their own right.

High temperature transport properties of lead chalcogenides and their alloys

This thesis describes a series of experimental studies of lead chalcogenide thermoelectric semiconductors, mainly PbSe. Focusing on a well-studied semiconductor and reporting good but not extraordinary zT, this thesis distinguishes itself by answering the following questions that haven’t been answered: What represents the thermoelectric performance of PbSe? Where does the high zT come from? How (and how much) can we make it better? For the first question, samples were made with highest quality. Each transport property was carefully measured, cross-verified and compared with both historical and contemporary report to overturn commonly believed underestimation of zT. For n- and p-type PbSe zT at 850 K can be 1.1 and 1.0, respectively. For the second question, a systematic approach of quality factor B was used. In n-type PbSe zT is benefited from its high-quality conduction band that combines good degeneracy, low band mass and low deformation potential, whereas zT of p-type is boosted when two mediocre valence bands converge (in band edge energy). In both cases the thermal conductivity from PbSe lattice is inherently low. For the third question, the use of solid solution lead chalcogenide alloys was first evaluated. Simple criteria were proposed to help quickly evaluate the potential of improving zT by introducing atomic disorder. For both PbTe1-xSex and PbSe1-xSx, the impacts in electron and phonon transport compensate each other. Thus, zT in each case was roughly the average of two binary compounds. In p-type Pb1-xSrxSe alloys an improvement of zT from 1.1 to 1.5 at 900 K was achieved, due to the band engineering effect that moves the two valence bands closer in energy. To date, making n-type PbSe better hasn’t been accomplished, but possible strategy is discussed.

Pulse NMR in solids : chemical shift, lead fluoride and thorium hydride

Part one of this thesis consists of two sections. In the first section the fluorine chemical shift of a single crystal CaF_2 has been measured as a function of external pressure up to 4 kilobar at room temperature using multiple pulse NMR techniques. The pressure dependence of the shift is found to be -1.7 ± 1 ppm/kbar, while a theoretical calculation using an overlap model predicts a shift of -0.46 ppm/kbar. In the second section a separation of the chemical shift tensor into physically meaningful "geometrical" and "chemical" contributions is presented and a comparison of the proposed model calculations with recently reported data on hydroxyl proton chemical shift tensors demonstrates, that for this system, the geometrical portion accounts for the qualitative features of the measured tensors.

Part two of the thesis consists of a study of fluoride ion motion in β-PbF_2 doped with NaF by measurement of the ^(19)F transverse relaxation time (T_2), spin lattice relaxation time (T_1) and the spin lattice relaxation time in the rotating frame (T_(1r)). Measurements over the temperature range of -50°C to 160°C lead to activation energies for T_1, T_(1r) and T_2 of 0.205 ± 0.01, 0.29 + 0.02 and 0.27 ± 0.01 ev/ion, and a T_(1r) minimum at 56°C yields a correlation time of 0.74 μsec. Pressure dependence of T_1 and T_2 yields activation volumes of <0.2 cm^3/g-mole and 1.76 ± 0.05 cm^3/g-mole respectively. These data along with the measured magnetic field independence of T_1 suggest that the measured T_1's are not caused by ^(19)F motion, but by thermally excited carriers.

Part three of the thesis consists of a study of two samples of Th_4H_(15), prepared under different conditions but both having the proper ratio of H/Th (to within 1%). The structure of the Th_4H_(15) as suggested by X-ray measurements is confirmed through a moment analysis of the rigid lattice line shape. T_1 and T_2 measurements above 390 K furnish activation energies of 16.3 ± 1.2 kcal/mole and 18.0 ± 3.0 kcal/mole, respectively. Below 350 K, T_(1r) measurements furnish an activation energy of 10.9 ± 0.7 kcal/mole, indicating most probably more than a single mechanism for proton motion. A time-temperature hysteresis effect of the proton motion was found in one of the two samples and is strongly indicative of a phase change. T_1 at room temperature and below is dominated by relaxation due to conduction electrons with the product T_1T being 180 ± 10 K-sec. Using multiple pulse techniques to greatly reduce homonuclear dipolar broadening, a temperature-dependent line shift was observed, and the chemical shift anisotropy is estimated to be less than 16 ppm.

A pessoa estomizada e o processo de inclusão no trabalho: contribuição para a enfermagem

Estudo cujo objeto tratou da inclusão do cliente estomizado no mundo do trabalho. Os objetivos foram: identificar as dificuldades e facilidades dos clientes estomizados para inclusão no mundo do trabalho; analisar as possibilidades de inclusão no mundo do trabalho; discutir, a partir do ponto de vista do cliente estomizado, as orientações fornecidas pelos enfermeiros com vistas à inclusão no mundo do trabalho. O referencial teórico baseou-se no campo da Saúde do Trabalhador, enfocando a reabilitação profissional e o capítulo de bases conceituais abordou o conhecimento da estomaterapia, do mundo do trabalho, da deficiência física e aspectos legais que envolvem a reabilitação do estomizado no mundo laboral. O desenho metodológico foi de uma pesquisa descritiva, exploratória, de natureza qualitativa, realizada com 20 clientes estomizados definitivos, aos quais se aplicou uma entrevista semiestruturada. O método de análise dos dados foi a Análise Temática de Conteúdo, a qual fez emergir quatro categorias: a) Sentidos do Trabalho para o Ser Estomizado; b) O Estomizado e Sua Problemática Biopsicossocial; c) Contexto Social e Aspectos Legais Envolvendo a Inclusão do Estomizado no Mundo Laboral; d) O Enfermeiro e Sua Participação na Reabilitação do Cliente Estomizado. Os resultados revelaram que a maioria dos sujeitos trabalhava informalmente e recebia ao mesmo tempo algum auxílio governamental. Ressalta-se que eles reconheciam a ilegalidade desta situação, porém, julgavam-na necessária devido aos baixos valores dos benefícios, enfatizando-se a sensação de utilidade causada pelo fato de trabalharem. Referiram que o retorno ao trabalho era prejudicado devido a empecilhos encontrados nas dimensões psíquica, física e social, as quais estavam articuladas intimamente. Enfatizaram grande dificuldade em encontrarem empregos adequados às suas especificidades, e que não prejudicassem sua condição de saúde, pois há necessidade de banheiros adaptados, de não exposição ao calor na região do estoma e nem a esforços físicos severos, sem contar com a necessidade de um emprego que lhes permita flexibilidade para irem às consultas da equipe multiprofissional. Os maiores empecilhos sociais referiram-se ao desconhecimento e descaso social e governamental a respeito do que é ser estomizado, pois esta problemática não é divulgada, e nem conhecida pela maioria da população. Em relação aos enfermeiros, os sujeitos foram quase unânimes em referirem falta de orientação por parte desses profissionais, acerca de esclarecerem sobre sua inclusão no mundo do trabalho. Este fato caracterizou-se como preocupante, pois os enfermeiros são educadores por excelência e a orientação está intimamente ligada ao processo de reabilitação. Concluiu-se que o retorno ao trabalho foi considerado essencial, mas existem inúmeras dificuldades para que este retorno e manutenção no universo laboral. Estes empecilhos os levam a adquirirem aposentadorias precoces ou auxílios-doença. Há de se rever o processo de reabilitação da pessoa com estoma, especialmente no que se refere a sua inclusão no mundo do trabalho, no sentido de melhor prepará-la para suas potencialidades e limitações, destacando-se que ela não é incapaz e que existem atividades formais em que elas podem ser produtivas e felizes.

Euskarazko ahozko grabazioen edukia egiaztatzeko sistema

[EU]Ahots teknologiaren garapenaren gorakadak, hizketan minusbaliotasunen bat duten pertsonen eguneroko bizitza ahalik eta erosoena egitearen saiakerarekin batera, Aholab ikerkuntza taldea ZURE TTS proiektua garatzera eraman du, proiektuaren helburua ahots minusbaliotasun batez jota dauden edo ahotsa guztiz galdu duten pertsonentzat hizketa sintetizadore bat garatzea delarik. Ahots sintetizatua lortzeko, ahots emaileek grabatutako esaldiez osatutako ahots naturaleko corpus bat hartzen da oinarritzat. Sintesi prozesua ahalik eta kalitate altuenekoa izateko, nahitaezkoa da datu basean gordeta dagoen ahotsa egokia izatea, eta horregatik, burutuko den proiektuak grabazioen edukiaren egiaztatzaile bat garatzea du helburu, erabiltzaileak irakurritako esaldiak zuzenak diren edo ez egiaztatzen dituena, horrela ahots sintetizatuaren kalitatea bermatuz.

The Equation of State and Petrogenesis of Komatiite

(1) Equation of State of Komatiite

The equation of state (EOS) of a molten komatiite (27 wt% MgO) was detennined in the 5 to 36 GPa pressure range via shock wave compression from 1550°C and 0 bar. Shock wave velocity, U_S, and particle velocity, U_P, in km/s follow the linear relationship U_S = 3.13(±0.03) + 1.47(±0.03) U_P. Based on a calculated density at 1550°C, 0 bar of 2.745±0.005 glee, this U_S-U_P relationship gives the isentropic bulk modulus K_S = 27.0 ± 0.6 GPa, and its first and second isentropic pressure derivatives, K'_S = 4.9 ± 0.1 and K"_S = -0.109 ± 0.003 GPa^-1.

The calculated liquidus compression curve agrees within error with the static compression results of Agee and Walker [1988a] to 6 GPa. We detennine that olivine (FO₉₄) will be neutrally buoyant in komatiitic melt of the composition we studied near 8.2 GPa. Clinopyroxene would also be neutrally buoyant near this pressure. Liquidus garnet-majorite may be less dense than this komatiitic liquid in the 20-24 GPa interval, however pyropic-garnet and perovskite phases are denser than this komatiitic liquid in their respective liquidus pressure intervals to 36 GPa. Liquidus perovskite may be neutrally buoyant near 70 GPa.

At 40 GPa, the density of shock-compressed molten komatiite would be approximately equal to the calculated density of an equivalent mixture of dense solid oxide components. This observation supports the model of Rigden et al. [1989] for compressibilities of liquid oxide components. Using their theoretical EOS for liquid forsterite and fayalite, we calculate the densities of a spectrum of melts from basaltic through peridotitic that are related to the experimentally studied komatiitic liquid by addition or subtraction of olivine. At low pressure, olivine fractionation lowers the density of basic magmas, but above 14 GPa this trend is reversed. All of these basic to ultrabasic liquids are predicted to have similar densities at 14 GPa, and this density is approximately equal to the bulk (PREM) mantle. This suggests that melts derived from a peridotitic mantle may be inhibited from ascending from depths greater than 400 km.

The EOS of ultrabasic magmas was used to model adiabatic melting in a peridotitic mantle. If komatiites are formed by >15% partial melting of a peridotitic mantle, then komatiites generated by adiabatic melting come from source regions in the lower transition zone (≈500-670 km) or the lower mantle (>670 km). The great depth of incipient melting implied by this model, and the melt density constraint mentioned above, suggest that komatiitic volcanism may be gravitationally hindered. Although komatiitic magmas are thought to separate from their coexisting crystals at a temperature =200°C greater than that for modern MORBs, their ultimate sources are predicted to be diapirs that, if adiabatically decompressed from initially solid mantle, were more than 700°C hotter than the sources of MORBs and derived from great depth.

We considered the evolution of an initially molten mantle, i.e., a magma ocean. Our model considers the thermal structure of the magma ocean, density constraints on crystal segregation, and approximate phase relationships for a nominally chondritic mantle. Crystallization will begin at the core-mantle boundary. Perovskite buoyancy at > 70 GPa may lead to a compositionally stratified lower mantle with iron-enriched mangesiowiistite content increasing with depth. The upper mantle may be depleted in perovskite components. Olivine neutral buoyancy may lead to the formation of a dunite septum in the upper mantle, partitioning the ocean into upper and lower reservoirs, but this septum must be permeable.

(2) Viscosity Measurement with Shock Waves

We have examined in detail the analytical method for measuring shear viscosity from the decay of perturbations on a corrugated shock front The relevance of initial conditions, finite shock amplitude, bulk viscosity, and the sensitivity of the measurements to the shock boundary conditions are discussed. The validity of the viscous perturbation approach is examined by numerically solving the second-order Navier-Stokes equations. These numerical experiments indicate that shock instabilities may occur even when the Kontorovich-D'yakov stability criteria are satisfied. The experimental results for water at 15 GPa are discussed, and it is suggested that the large effective viscosity determined by this method may reflect the existence of ice VII on the Rayleigh path of the Hugoniot This interpretation reconciles the experimental results with estimates and measurements obtained by other means, and is consistent with the relationship of the Hugoniot with the phase diagram for water. Sound waves are generated at 4.8 MHz at in the water experiments at 15 GPa. The existence of anelastic absorption modes near this frequency would also lead to large effective viscosity estimates.

(3) Equation of State of Molybdenum at 1400°C

Shock compression data to 96 GPa for pure molybdenum, initially heated to 1400°C, are presented. Finite strain analysis of the data gives a bulk modulus at 1400°C, K'_S. of 244±2 GPa and its pressure derivative, K'_OS of 4. A fit of shock velocity to particle velocity gives the coefficients of U_S = C_O+S U_P to be C_O = 4.77±0.06 km/s and S = 1.43±0.05. From the zero pressure sound speed, C_O, a bulk modulus of 232±6 GPa is calculated that is consistent with extrapolation of ultrasonic elasticity measurements. The temperature derivative of the bulk modulus at zero pressure, θK_OSθT|_P, is approximately -0.012 GPa/K. A thermodynamic model is used to show that the thermodynamic Grüneisen parameter is proportional to the density and independent of temperature. The Mie-Grüneisen equation of state adequately describes the high temperature behavior of molybdenum under the present range of shock loading conditions.

As adaptações e improvisações no trabalho hospitalar e suas implicações na saúde do trabalhador de enfermagem

O cenário atual das instituições públicas de saúde caracteriza-se pelas peculiaridades do modelo de reestruturação produtiva, em que o enxugamento da máquina pública traduz-se num contexto de precarização das condições de trabalho. Em meio à escassez e inadequação dos recursos materiais e ao déficit de recursos humanos, os trabalhadores de enfermagem vêem-se diante da necessidade de elaborarem adaptações e improvisações de materiais, equipamentos e, até mesmo, de pessoal. Diante desta problemática, selecionou-se como objeto de estudo: a percepção do trabalhador de enfermagem sobre as adaptações e improvisações no trabalho hospitalar e suas implicações na saúde do trabalhador. Apresenta como objetivos: identificar a percepção dos trabalhadores de enfermagem sobre as adaptações e improvisações; descrever as situações que conduzem os trabalhadores de enfermagem à realização desta prática e analisar as implicações das adaptações e improvisações na saúde dos trabalhadores de enfermagem. Pesquisa qualitativa e descritiva, cujo cenário foi um hospital público universitário, localizado na cidade do Rio de Janeiro. Os sujeitos foram vinte trabalhadores das equipes de enfermagem, atuantes nos setores de terapia intensiva e enfermarias cirúrgicas. Os dados foram coletados por meio de entrevista semi-estruturada, no mês de julho do ano de 2009. Procedeu-se à análise temática de conteúdo, a qual propiciou a criação de quatro categorias empíricas: categoria 1: contextos e determinantes das adaptações/improvisações; categoria 2: pré-requisitos para a realização das adaptações/improvisações; categoria 3: aspectos subjetivos vinculados à prática do adaptar/improvisar e categoria 4: a face positiva e a face negativa do adaptar/improvisar as repercussões na saúde do trabalhador. Concluiu-se que as percepções dos trabalhadores de enfermagem sobre a prática do adaptar/improvisar caracteriza-se contraditória ou dialética, com respostas que envolvem o sofrimento e o prazer; a satisfação e a insatisfação; a motivação e a desmotivação, entre outras contradições. Constatou-se que as adaptações e improvisações são elaboradas, predominantemente, para garantir que o cuidado seja prestado, pois diante de um contexto de precarização, a falta de recursos quase que inviabiliza a prestação do cuidado, e esta prática caracteriza-se como uma artimanha ou um ajuste no processo de trabalho o qual assegura que a tarefa seja cumprida. Verificou-se que esta prática tem impactos negativos na saúde, espoliando física e psiquicamente os trabalhadores de enfermagem.

One-step digit-set-restricted modified signed-digit adder using an incoherent correlator based on a shared content-addressable memory

An efficient one-step digit-set-restricted modified signed-digit (MSD) adder based on symbolic substitution is presented. In this technique, carry propagation is avoided by introducing reference digits to restrict the intermediate carry and sum digits to {1,0} and {0,1}, respectively. The proposed technique requires significantly fewer minterms and simplifies system complexity compared to the reported one-step MSD addition techniques. An incoherent correlator based on an optoelectronic shared content-addressable memory processor is suggested to perform the addition operation. In this technique, only one set of minterms needs to be stored, independent of the operand length. (C) 2002 society or Photo-Optical Instrumentation Engineers.

Efficient two-step digit-set-restricted modified signed-digit algorithm based on optoelectronic shared content-addressable memory

A two-step digit-set-restricted modified signed-digit (MSD) adder based on symbolic substitution is presented. In the proposed addition algorithm, carry propagation is avoided by using reference digits to restrict the intermediate MSD carry and sum digits into {(1) over bar ,0} and {0, 1}, respectively. The algorithm requires only 12 minterms to generate the final results, and no complementarity operations for nonzero outputs are involved, which simplifies the system complexity significantly. An optoelectronic shared content-addressable memory based on an incoherent correlator is used for experimental demonstration. (c) 2005 Society of Photo-Optical Instrumentation Engineers.

Efficient two-step digit-set-restricted modified signed-digit algorithm based on optoelectronic shared content-addressable memory

A two-step digit-set-restricted modified signed-digit (MSD) adder based on symbolic substitution is presented. In the proposed addition algorithm, carry propagation is avoided by using reference digits to restrict the intermediate MSD carry and sum digits into {(1) over bar ,0} and {0, 1}, respectively. The algorithm requires only 12 minterms to generate the final results, and no complementarity operations for nonzero outputs are involved, which simplifies the system complexity significantly. An optoelectronic shared content-addressable memory based on an incoherent correlator is used for experimental demonstration. (c) 2005 Society of Photo-Optical Instrumentation Engineers.