Applying discrete element modelling to vertical and horizontal shaft impact crushers

The PFC3D (particle flow code) that models the movement and interaction of particles by the DEM techniques was employed to simulate the particle movement and to calculate the velocity and energy distribution of collision in two types of impact crusher: the Canica vertical shaft crusher and the BJD horizontal shaft swing hammer mill. The distribution of collision energies was then converted into a product size distribution for a particular ore type using JKMRC impact breakage test data. Experimental data of the Canica VSI crusher treating quarry and the BJD hammer mill treating coal were used to verify the DEM simulation results. Upon the DEM procedures being validated, a detailed simulation study was conducted to investigate the effects of the machine design and operational conditions on velocity and energy distributions of collision inside the milling chamber and on the particle breakage behaviour. (C) 2003 Elsevier Ltd. All rights reserved.

The rheology of flotation froths

A literature review has highlighted the need to measure flotation froth rheology in order to fully characterise the role of the froth in the flotation process. The initial investigation using a coaxial cylinder viscometer for froth rheology measurement led to the development of a new device employing a vane measuring head. The modified rheometer was used in industrial scale flotation tests at Mt. Isa Copper Concentrator. The measured froth rheograms show a non-Newtonian nature for the flotation froths (pseudoplastic flow). The evidence of the non-Newtonian flow has questioned the validity of application of the Laplace equation in froth motion modelling as used by a number of researchers, since the assumption of irrotational flow is violated. Correlations between the froth rheology and the froth retention time, water hold-up in the froth and concentrate grades have been found. These correlations are independent of air flow rate (test data at various air flow rates fall on one similar trend line). This implies that froth rheology may be used as a lumped parameter for other operating variables in flotation modelling and scale up. (C) 2003 Elsevier Science B.V. All rights reserved.

An energy-based model for swing hammer mills

An energy-based swing hammer mill model has been developed for coke oven feed preparation. it comprises a mechanistic power model to determine the dynamic internal recirculation and a perfect mixing mill model with a dual-classification function to mimic the operations of crusher and screen. The model parameters were calibrated using a pilot-scale swing hammer mill at various operating conditions. The effects of the underscreen configurations and the feed sizes on hammer mill operations were demonstrated through the fitted model parameters. Relationships between the model parameters and the machine configurations were established. The model was validated using the independent experimental data of single lithotype coal tests with the same BJD pilot-scale hammer mill and full operation audit data of an industrial hammer mill. The outcome of the energy-based swing hammer mill model is the capability to simulate the impact of changing blends of coal or mill configurations and operating conditions on product size distribution. Alternatively, the model can be used to select the machine settings required to achieve a desired product. (C) 2003 Elsevier Science B.V. All rights reserved.

Silver coordination polymers with tri- and hexacyanoethyl-functionalized macrocyclic ligands

Tri-and hexa-cyanoethyl functionalized 17-(L-1) and 42-membered (L-2) macrocyclic compounds were obtained by [1 + 1] (for L-1) or [2 + 2] (for L-2) cyclocondensation of the corresponding dialdehyde and diethylenetriamine, followed by hydrogenation by KBH4 and subsequent cyano-functionalization with acrylonitrile. They react with silver nitrate, leading to the formation of [AgL1](NO3) (1) and of the metalorganic coordination polymers [Ag-2(NO3)(2)L-1](n) (2) and {[Ag2L2](NO3)(2)}(n) (3). The complexes were characterized by elemental analysis, H-1 NMR, C-13 NMR, IR spectroscopies, and ESI-MS; moreover, L-2, 1, 2 and 3 were also characterized by single crystal X-ray diffraction. The metal cation in 1 is pentacoordinated with a N3O2 coordination environment; in 2, the metal cations display N4O2 octahedral and N2O3 square-pyramid coordination and in 3 they are in square-planar N-4 sites. In 1, the ligand acts as a pentadentate chelator, and in the other two cases, the ligands behave as octadentate chelators in a 1 kappa N-3:kappa O-2,2 kappa N,3 kappa N,4 kappa N (in 2) or 1 kappa N-3,2 kappa N-3,3 kappa N,4 kappa N fashion (in 3). The cyanoethyl strands of the ligands are directly involved in the formation of the 2D frameworks of 2 and 3, which in the former polymer can be viewed as a net composed of hexametallic 36-membered macrocyclic rings and in the latter generates extra hexametallic 58-membered cyclic sets that form zig-zag layers. The thermal analytical and electrochemical properties of these silver complexes were also studied.

One-step preparation of optically transparent Ni-Fe oxide film electrocatalyst for oxygen evolution reaction

Optically transparent cocatalyst film materials is very desirable for improved photoelectrochemical (PEC)oxygen evolution reaction (OER) over light harvesting photoelectrodes which require the exciting light to irradiate through the cocatalyst side, i.e., front-side illumination. In view of the reaction overpotential at electrode/electrolyte interface, the OER electrocatalysts have been extensively used as cocatalysts for PEC water oxidation on photoanode. In this work, the feasibility of a one-step fabrication of the transparent thin film catalyst for efficient electrochemical OER is investigated. The Ni-Fe bimetal oxide films, 200 nm in thickness, are used for study. Using a reactive magnetron co-sputtering technique, transparent(> 50% in wavelength range 500-2000 nm) Ni-Fe oxide films with high electrocatalytic activities were successfully prepared at room temperature. Upon optimization, the as-prepared bimetal oxide film with atomic ratio of Fe/Ni = 3:7 demonstrates the lowest overpotential for the OER in aqueous KOH solution, as low as 329 mV at current density of 2 mA cm 2, which is 135 and 108 mV lower than that of as-sputtered FeOx and NiOx thin films, respectively. It appears that this fabrication strategy is very promising to deposit optically transparent cocatalyst films on photoabsorbers for efficient PEC water splitting.

Occurrence of influenza B/Hong Kong-Like strains in Brazil, during 2002

Through the influenza virus surveillance from January to October 2002, influenza B/Hong Kong-like strains circulating in the Southeast and Centre East regions of Brazil have been demonstrated. This strain is a variant from B/Victoria/02/88 whose since 1991 and until recently have been isolated relatively infrequently and have been limited to South-Eastern Asia. A total of 510 respiratory secretions were collected from patients 0 to 60 years of age, with acute respiratory illness, living in the Southeast and Centre East regions of Brazil, of which 86 (17.13%) were positive for influenza virus. Among them 12 (13.95%) were characterized as B/Hong Kong/330/2001; 3 (3.49%) as B/Hong Kong/1351/2002 a variant from B/Hong Kong/330/2001; 1 (1.16%) as B/Sichuan/379/99; 1 (1.16%) as B/Shizuoka/5/2001, until now. The percentages of cases notified during the surveillance period were 34.88%, 15.12%, 15.12%, 4.65%, 15.12%, 13.95%, in the age groups of 0-4, 5-10, 11-15, 16-20, 21-30, 31-50, respectively. The highest proportion of isolates was observed among children younger than 4 years but serious morbidity and mortality has not been observed among people older than 65 years, although B influenza virus component for vaccination campaign 2002 was B/Sichuan/379/99 strain. This was probably due to the elderly protection acquired against B/Victoria/02/88. In addition, in influenza A/Panama/2007/99-like (H3N2) strains 22 (25.58%) were also detected, but influenza A(H1N1) has not been detected yet.

Encurvadura lateral em vigas de alumínio

Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Perfil de Estruturas

Encurvadura lateral em vigas de alumínio

A presente dissertação tem como objetivo o estudo do fenómeno de encurvadura lateral em vigas de alumínio com secção em I, simplesmente apoiadas e sujeitas a flexão pura (momento uniforme ao longo da viga). Em particular, estuda-se uma abordagem alternativa à do Eurocódigo 9 (EC9), que consiste em utilizar esbeltezas normalizadas que são função da carga crítica elastoplástica da viga. Para o efeito, é desenvolvido um programa de cálculo automático em MATLAB. A abordagem é aplicada (i) à curva de dimensionamento do EC9, (ii) a resultados numéricos, utilizando um programa de elementos finitos, e (iii) aos resultados experimentais obtidos por Y.Q. Wang, H.X. Yuan, Y.J. Shi e M. Cheng [1]. Mostra-se que se obtém uma significativa dispersão com a curva do EC9 mas, por oposição, uma reduzida dispersão com os resultados numéricos e experimentais. Por fim, mostra-se que os resultados numéricos para esbeltezas reduzidas (elevadas) conduzem a valores da resistência à encurvadura significativamente inferiores (superiores) aos do EC9.

Preliminary screening of the larvicidal effect of Brevibacillus laterosporus strains against the blowfly Chrysomya megacephala(Fabricius, 1794) (Diptera: Calliphoridae)

AbstractINTRODUCTION: This study evaluated whether different strains of Brevibacillus laterosporus could be used to control larvae of the blowfly Chrysomya megacephala , a pest that affects both human and animal health.METHODS:Mortality rates were recorded after 1-mL suspensions of sporulated cells of 14 different strains of B. laterosporus were added to 2.5g of premixed diet consisting of rotting ground beef fed to first instar larvae of C. megacephala . All bioassays were performed using 10 larvae per strain, with a minimum of three replicates for each bioassay. Larval mortality was recorded daily up to seven days.RESULTS:Strains Bon 707, IGM 16-92, and Shi 3 showed the highest toxicity toward the larvae producing 70.5%, 64.5%, and 51.6% of larval mortality, respectively, which was significantly higher than that in the control group (p < 0.05). In contrast, strains NRS 1642, NRS 661, NRS 590 BL 856, NRS 342, ATCC 6457, Bon 712, and NRS 1247 showed limited or no pathogenic activity against the target larvae.CONCLUSIONS:Our preliminary data indicated that B. laterosporus could be used to develop bioinsecticides against C. megacephala .

Prevalence and genotype distribution of human papillomavirus: implications for cancer screening and vaccination in Henan province, China

Abstract: INTRODUCTION: To provide information for cervical cancer screening and vaccination in Henan province, China, the distribution of human papillomavirus (HPV) was analyzed. METHODS: The HPV genotypes were detected using gene array and flow-through hybridization. RESULTS: Overall, 38.1% (1,536/4,033) of the women were human papillomavirus deoxyribonucleic acid (HPV DNA) positive. The prevalence of high-risk HPV types was 32.4%. HPV 16 was the most prevalent genotype (8.9%), followed by HPV 52 (5.8%) and HPV 58 (4.4%). CONCLUSIONS: The data support close surveillance of women for cervical cancer screening, and HPV prophylactic vaccines including HPV16, HPV 52, and HPV 58 might offer greater protection in this area.

Hand gesture recognition for human computer interaction : a comparative study of different image features

Hand gesture recognition for human computer interaction, being a natural way of human computer interaction, is an area of active research in computer vision and machine learning. This is an area with many different possible applications, giving users a simpler and more natural way to communicate with robots/systems interfaces, without the need for extra devices. So, the primary goal of gesture recognition research is to create systems, which can identify specific human gestures and use them to convey information or for device control. For that, vision-based hand gesture interfaces require fast and extremely robust hand detection, and gesture recognition in real time. In this study we try to identify hand features that, isolated, respond better in various situations in human-computer interaction. The extracted features are used to train a set of classifiers with the help of RapidMiner in order to find the best learner. A dataset with our own gesture vocabulary consisted of 10 gestures, recorded from 20 users was created for later processing. Experimental results show that the radial signature and the centroid distance are the features that when used separately obtain better results, with an accuracy of 91% and 90,1% respectively obtained with a Neural Network classifier. These to methods have also the advantage of being simple in terms of computational complexity, which make them good candidates for real-time hand gesture recognition.

New self-assembled supramolecular hydrogels based on dehydropeptides

Supramolecular hydrogels rely on small molecules that self-assemble in water as a result of the cooperative effect of several relatively weak intermolecular interactions. Peptide-based low molecular weight hydrogelators have attracted enormous interest owing to the simplicity of small molecules combined with the versatility and biocompatibility of peptides. In this work, naproxen, a well known non-steroidal anti-inflammatory drug, was N-conjugated with various dehydrodipeptides to give aromatic peptide amphiphiles that resist proteolysis. Molecular dynamics simulations were used to obtain insight into the underlying molecular mechanism of self-assembly and to rationalize the design of this type of hydrogelators. The results obtained were in excellent agreement with the experimental observations. Only dehydrodipeptides having at least one aromatic amino acid gave hydrogels. The characterization of the hydrogels was carried out using transmission electron microscopy (TEM), circular dichroism (CD), fluorescence spectroscopy and also rheological assays.

Importância da interação entre a integrina Mac-1 dos leucócitos e a glicoproteína Iba das plaquetas para o recrutamento de leucócitos pelas plaquetas e para a resposta inflamatória à lesão vascular

OBJETIVO: Avaliar a importância da interação entre a integrina Mac-1 dos leucócitos (a Mb 2) e a glicoproteína (GP) Iba das plaquetas para o recrutamento de leucócitos após a lesão vascular e o efeito da neutralização da interação Mac-1-GPIba sobre a proliferação celular e a hiperplasia neointimal desencadeadas por lesão vascular. MÉTODOS: Um peptídeo denominado M2 ou anticorpo anti-M2 foi desenvolvido para bloquear a interação Mac-1-GPIba . Esse peptídeo foi injetado e comparado com anticorpo-controle em camundongos C57B1/6J submetidos a lesão vascular da artéria femoral com corda-guia. Um, cinco ou 28 dias após a lesão vascular, as artérias femorais foram retiradas para a realização de morfometria e imuno-histoquímica. RESULTADOS: O bloqueio da interação Mac-1-GPIba promoveu uma redução estatisticamente significativa do número de leucócitos na camada média no primeiro dia após a lesão vascular (controle: 7,9±5,0% do total de células versus anti-M2: 2,0±1,6%, p=0,021), bem como determinou uma diminuição estatisticamente significativa do acúmulo de leucócitos na neoíntima em cinco e 28 dias (controle: 42,3±12,9% versus anti-M2: 24,6±10,8%, p=0,047 e controle: 7,9±3,0% versus anti-M2: 3,3±1,3%, p=0,012; respectivamente). A proliferação celular na camada média do vaso em cinco dias pós-lesão foi reduzida com o bloqueio da interação Mac-1-GPIba (controle: 5,0±2,9% do total de células versus anti-M2: 1,8±0,5%; p=0,043), assim como houve diminuição significativa da proliferação celular na camada íntima do vaso em 28 dias (controle: 3,8±1,7% versus anti-M2: 2,0±1,2%; p=0,047). O bloqueio da interação Mac-1-GPIba também determinou uma redução estatisticamente significativa do espessamento intimal em 28 dias pós-lesão (controle: 10.395±3.549 µm² versus anti-M2: 4.561±4.915 µm²; p=0,012). CONCLUSÃO: O recrutamento de leucócitos após a lesão vascular é dependente da interação Mac-1-GPIba e a neutralização dessa interação inibe a proliferação celular e a formação neointimal.

O conduto valvulado bovino contegra, um biomaterial para o tratamento cirúrgico de cardiopatias congênitas

O Contegra, um enxerto de veia jugular bovina, tem sido amplamente utilizado como biomaterial de preferência no tratamento cirúrgico das cardiopatias congênitas, especialmente como um conduto para a reconstrução da via de saída ventricular direita. Este artigo tem como objetivo fazer uma revisão abrangente sobre os desfechos clínicos do Contegra. Foram recuperados, coletados e analisados, relatos de Contegra publicados desde 2002. Havia 1.718 Contegra, aplicados em 1.705 pacientes. Os tamanhos dos condutos foram de 8-22 mm. As idades dos pacientes foram de recém-nascidos até 74,5 anos, com prevalência de pacientes pediátricos. O diagnóstico primário foi cardiopatia congênita em todos os casos, sendo os três diagnósticos principais: tetralogia de Fallot, tronco arterioso e atresia pulmonar, que representaram 25,6%, 16,7% e 13,1%, respectivamente. O Contegra foi utilizado como enxerto tubular na posição pulmonar em 1635 (95,9%) pacientes, como remendo monocúspide em 12 (0,7%), como enxerto na posição da valva pulmonar ou monocúspide em 40 (2,3%), e, como conduto artéria pulmonar-veia cava inferior na operação de Fontan, em 18 (1,1%) pacientes, respectivamente. O reimplante de conduto foi realizado em 141 (8,3%) pacientes, 33,8 ± 37 (8,6-106,8) meses após a inserção do conduto inicial. A plástica do conduto foi necessária em seis (0,4%) e a reintervenção em 83 (4,9%) dos pacientes. As indicações do reimplante do conduto incluíram estenose importante da anastomose distal, pseudoaneurisma da anastomose proximal e regurgitação importante do conduto. Quanto ao bom desempenho, disponibilidade e longevidade, o Contegra é um biomaterial adequado para a reconstrução da via de saída ventricular direita e como remendo para reparo de comunicação interventricular, mas não é apto para a operação de Fontan.