Belvosia sp (diptera: tachinidae) parasitizing halysidota sp (lepidoptera: arctiidae) caterpillars on ficus benjamina (moraceae) in Brazil

Ficus benjamina L. (Moraceae) is an exotic ornamental plant in Brazil. The aim of this study was to identify a defoliator and its parasitoid on F. benjamina plants in Vicosa, Minas Gerais, Brazil and to determine the number of pupae and the emergence of lepidopteran and a dipteran. Four Halysidota sp. (Lepidoptera: Arctiidae) groups, with 158, 144, 137 and 129 last-instar caterpillars aggregated on the trunks of 4 F. benjamina trees. These caterpillars were collected, held in plastic containers with ficus leaves until development and emergence were completed. Adults of 1 undescribed lepidopteran species (Halysidota) and 1 dipteran species [Belvosia (Tachinidae)] emerged from the Halysidota pupae. An average of 118 viable Halysidota pupae per group were formed, and an average of 62.5 Belvosia individuals emerged from these host pupae per Halysidota group. From a grand total of 472 Halysidota pupae only one adult emerged. Halysidota sp. damaged F. benjamina plants in Vicosa, Minas Gerais, Brazil, but this defoliator was parasitized by Belvosia sp. The findings reported here indicate that Belvosia sp. appears to have the potential to reduce populations of Halysidota sp. and possibly protect F. benjamina in ornamental plantings.

Numerical and experimental investigations of three-dimensional container filling with Newtonian viscous fluids

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Doses de nitrogênio no crescimento inicial e nutrição de plantas de guanandi

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desempenho de Ankistrodesmus gracilis (Reischi) Korsikov (Chlorophyta) cultivada em três meios de cultura em laboratório

Pós-graduação em Aquicultura - FCAV

Repelência e deterrência alimentar de vaquinhas por óleos de nim e cinamomo aplicados em folhas de feijoeiro

This work aimed to evaluate the repellent and deterrent effect of the application of concentrations of neem and chinaberry oil on bean leaves on the leaf beetles Diabrotica speciosa (Germar) and Cerotoma arcuata (Olivier). The concentrations of neem oil tested were 0.625, 1.25, 2.50, 5.00, 10.00 and 20,00 mL, corresponding respectively to 1, 2, 4, 8, 17 and 33 ppm of azadirachtin A and the concentrations of chinaberry oil used were the same used to neem oil, corresponding, however, to 1.875, 3.75, 7.50, 15.00, 30.00 and 60.00 mg mL(-1) of chinaberry extract, respectively. For the free-choice tests, glass containers were used as arenas, whereas for the no-choice tests Petri dishes were used, where in both one insect per treatment was released in the center. Attractiveness was evaluated in predetermined time periods, in addition to the leaf consumption, at the end of the experiment. Neem oil is repellent to D. speciosa and C. arcuata, with more efficient results at the 5.00, 10.00 and 20.00 mL concentrations. All concentrations of neem oil reduce leaf consumption of both insects, except in the no-choice test with D. speciosa, in which only the 10.00 and 20.00 mL concentrations are deterrent. Chinaberry oil provides high repellent activity on both leaf beetle species, and the 10.00 and 20.00 mL concentrations stood out. The 10.00 and 20.00 mL concentrations of chinaberry oil are deterrent to D. speciosa and C. arcuata.

Desenvolvimento de extensões para um sistema de carregamento e descarregamento de navios

One of the reasons that influences the efficience of a port terminal that is especialized in movement of containers is in the process of their loading and unloading. The fundamental idea is to determine a plan, to each port in order to decrease the number of total movement of loading and unloading that are necessary during the ship route to every port so that they save time and consequently reduce costs. The goal of this research was to present improvement in the program, written in language C, used to solve to problem of loading and unloading of ships, a NP-complete problem, through the meta-heuristics Simulated Annealing. With the improvement made, an average of 50% reduction of necessary time was gotten to solve the problem in 45 analised instances and in a specific group of these instances the average reduction reached 77 and in 10 instances there was even an improvement in the solution

Estudodo sistema eletrico emembarcações maritimascom propulsão diesel-eletrica

The globalization is each day more aggressive and demanding even more that new products be manufactured and therefore be delivered to many places in the globe. Thus, an efficient and vigorous transport system is demanded. There are many ways to transport a product, but one of the most used in the world is shipping. A marine vessel presents diversified structures of size and functions. In order to this system has more efficiency, alternatives should be used to obtain important energy savings. Usually, a vessel present a propulsion system purely mechanical, therefore the use of alternatives propulsions, like diesel-electric, is increasing. This graduation work has as main focus demonstrate the functioning of a diesel-electric propulsion system, since the main characteristics of each component of the system, likewise the analysis and electrical calculation, showing the advantages in relation to the conventional diesel propulsion system

Melhorias dos processos no setor de expedição em uma transportadora de cargas fracionadas

The transport market has forced organizations reduce the cost of services and processes, resulting from the highly competitive and, for such waste at all levels and processes are a focus of study for its elimination. This study refers to carrier fractional loads, located in the municipality of Itapecerica da Serra Layout and headquartered in São Paulo, which requires a rapid development throughout its structure, because its expansion was not accompanied by an evolution of effective processes. The need to increase efficiency in delivery with a reduced cost of transport forced the company to hire a logistics consulting to help identify potential bottlenecks in processes, suggest improvements with greater impact and implementation at the end of a critical analysis of results. This work focuses on the Layout of the warehouse shipping area of this organization and we used the method of action research to the consultant and involved could reach this conclusion collaboratively, as well as interviews with those involved in the process and also visual observation. Tools such as Key Performance Indicator, Mapping Workflow, Analytic Hierarchy Process, Applied Statistics and Standard Operating Procedure were used to assist in the identification, analysis and implementation of the proposed improvements

Proposta para melhoria da qualidade dos produtos cerâmicos e de criação de um polo cerâmico artesanal na cidade de Indiana - SP

This work presents a proposal to create a Polo Ceramic Craft in the town of Indiana - SP, through the potter’s organization in a cooperative that will coordinate activities to add value to ceramic pieces. To achieve this, two things are essential: improving the ceramic body and improve the properties of the ceramic material. For the first action it’s necessary to create a Central Mass Production of Ceramics, to provide raw materials and homogeneous composition that results in differentiated ceramic after burning process (sintering). To this end, we propose the incorporation of additives (which act as fluxes) to the clay material. These additives can be mineral such as feldspar and nefelinas or leavings, such as glass powder obtained from disposable containers. For the second action is necessary to acquire an oven, electric or gas, it reaches higher temperatures (around 1200 ° C). The presence of the additive and burning at higher temperatures will enable better production of sintered ceramic material with less porosity and water absorption and higher mechanical strength, and pieces vitrified and glazed, allowing them to assign a higher value. For the production of these materials (thinner walls) requires a smaller volume of clayey raw materials. Besides benefiting the ceramic pieces, the proposed changes reduce the environmental impact caused by burning wood, since it will be replaced by natural gas (or electricity), and even will reduce the disposal of glass containers in the environment by recycling and incorporating this material in the clay. From a social standpoint, the cooperative is crucial to the viability of the proposed project, to coordinate activities and commercial production, which will result in better wages and profits for companies and consequently for the city and its population

Resolução do problema de carregamento e descarregamento de contêineres em terminais portuários via Beam Search

One problem that has been happening frequently in port terminals is the poor planning of the loading and unloading of containers. The reason of this problem is the lack of an efficient method that provides the best means of these operations. The main goal of this work is, to implement a method that provides the best ways to perform the loading and unloading of containers, at each port and thus bring a great saving for these terminals, since the number of moves is directly proportional to cost. To carry out this program was used the idea that the containers are placed in vertical stacks, where the access can be done only by the top of the stack, so the ship was treated as an matrix and to fill it, two rules were created for loading and two for unloading. To obtain the best sequence of rules was used Beam Search method, which is an enumeration type implicit method that analyzes only the best solution of the tree generated. Thus, the program developed in the Java language, provides the best way to perform the loading and unloading ports and the way as the ship leaves each port using a graphical interface

Desenvolvimento de solução para o problema de alocação de navios em berços de terminais portuários: aplicação de algoritmos genéticos e otimização por nuvens de partículas

This work proposes two optimization algorithms for the solution of the Berth Allocation Problem (PAB). Due to the economic development of the country, it became necessary for the improvement of means of transport, which mainly shipping. For this, you need a better system management port, you will receive a lot of ships carrying cargo. In this work the PAB is approached so that the goals are to reduce costs and time handling in ports. For this, we applied two computational techniques, genetic algorithms and optimization for cloud particles, to obtain the best results for this problem. The results obtained with each type of algorithm are compared to conclude which method is more efficient for the port system

Otimização de custo no processo de fabricação de mangueira hidráulica

A large part of hydraulic hoses is produced on a mandrel. The mandrel has longer length and circular profile being produced by extrusion of polyamide polymer, which in this case is imported, then the process is depending on the import process, which entails high shipping costs and fees. This work studies the production of recycled mandrel, using the mandrel that is out of dimensional to produce hoses. After the production of recycled mandrel mechanical tensile and hardness were performed both in the natural and recycled mandrel to compare them. It was observed that recycled mandrel presents the tensile properties and hardness superior to natural mandrel. Thus, this work will directly impact the company`s business ultimately reducing costs, reducing waste and reducing environmental impacts

Propriedades térnicas de géis e xerogéis híbridos de sílica/orgânico à base de GPTS-TEOS com diferentes concentrações de GPTS

In the present work the thermal characteristics of gels and xerogels of Silica/organic hybrids derived from different concentrations of GPTS-TEOS were investigated by thermal analysis (TG, DTA, and DSC). The preparation of gels of the Silica/organic hybrid matrix was held through the sol-gel process, consisting by the hydrolysis of alkoxides GPTS and TEOS in proportion (1:1) and (1:2) that was promoted in acidic conditions under reflux and stirring at 80oC/2h, producing the matrix in the colloidal state (sol). Gels were prepared by addition of NH4OH to the sol, promoting gelation of sol in sealed plastics containers. Part of the gels samples was analyzed by TG, DTS and DSC techniques in order to characterize water loss and degradation of the polymeric “epoxy” groups present in the structure of the silica derived from the GPTS alkoxide. Another set of samples was dried at 80oC/48h to obtain xerogels (dried gels) and analyzed by the same techniques. We obtained the characteristics temperatures of the matrix by the techniques DTA, DSC and TG, under measurements of thermal analysis until 800oC and 600oC in case of DSC. By thermal analysis (TG, DTA, and DSC) the main endothermic events (loss of water, melting, pyrolysis) and exothermic events (burning of the polymer) of the GPTS-TEOS matrix were determined

A dengue como ferramenta de interdisciplinaridade e popularização científica entre estudantes de ensino fundamental

The majority of the population knows their role in dengue control, preventing the accumulation of water in containers as potential breeding sites of Aedes aegypti, the main vector of dengue. Also known chemical control, widely used by the institutions responsible for the control of endemic diseases. On the other hand, unaware that an alternative measure such biological control through a microbial biopesticide, safe, harmless to health and the environment, can be adopted. Thus, this work reported for elementary school students, simply and clearly, the biological control of mosquitoes through bacterial biopesticide produced locally. Moreover, promoted the interdisciplinary teaching of science and mathematics through the data tabulation and charting on interviews conducted by students, about the level of knowledge of the population about dengue and other related variables.

Inorganic elemental analysis and identification of residual monomers released from different glass ionomer cements in cell culture medium

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)