Facilitation de la procédure d’ablation de fibrillation auriculaire persistante après restauration du rythme sinusal pré-procédure : une étude multicentrique comparative

L’ablation de fibrillation auriculaire (FA) persistante est associée à des temps de procédure plus longs et à un moindre succès par rapport à l’ablation de FA paroxystique. Nous avons posé l’hypothèse que la restauration et le maintien du rythme sinusal ≥ 1 mois pré-procédure faciliteraient la terminaison de la FA et amélioreraient le succès de la procédure. Méthodes: Nous avons conduit une étude rétrospective comparant deux cohortes de patients consécutifs se présentant en FA persistante pour première ablation de FA : le groupe rythme sinusal (RS) avec restauration et maintien du rythme RS ≥ 1 mois pré-procédure (Groupe RS; N=40) et un groupe contrôle de patients en FA pré ablation (Groupe contrôle; N=40), apparié selon le sexe, l’âge, la longueur maximale de durée de FA. Une ablation de type en paliers (“stepwise”) a été réalisée dans les deux groupes (avec FA induite en début de procédure dans le groupe RS). Le succès a été défini par l’absence de récidive de FA ou de tachycardie atriale sans anti arythmique après un suivi minimal de 12 mois post procédure. Résultats: Durant la procédure de index d’ablation de FA, le cycle de FA était plus long dans le groupe RS par rapport au groupe contrôle (183±32 vs 166±20 ms, P=0.06) suggérant un remodelage inverse. Dans le groupe RS, la FA a été terminée plus fréquemment par l’ablation (95.0% vs 77.5%, P<0.05) et a demandé une ablation moins extensive avec moins d’ablation des électrocardiogrammes fragmentés (40.0% vs 87.5%, p<0.001) et moins de lésions linéaires (42.5% vs 82.5%, p<0.001). Les durées moyennes de procédure (199.8±69.8 vs 283.5±72.3 minutes, P<0.001), de fluoroscopie (51.0±24.9 vs 96.3±32.1 minutes, P<0.001), et de radiofréquence (47.5±18.9 vs 97.0±30.6 minutes, P<0.001) ont été plus courtes dans le groupe RS. Les succès cliniques ont été comparables dans les deux groupes après la première (55.0% vs 45.0%, P=0.28) et la dernière procédure (80.0% vs 70.0%, P=0.28), après une durée moyenne de suivi comparable (21.1±9.7 mois).

L'évaluation systématique de la lombalgie selon les données probantes.

Les illustrations accompagnant le texte ont été dessinées par monsieur Mathieu Gagnon.

Une étude cadavérique pour réduire les risques des approches chirurgicales et percutanées de l’artère fémorale

En chirurgie vasculaire, l’accès à l’artère fémorale, qu’il soit par une incision chirurgicale ou par une approche percutanée, est très fréquemment utilisé pour une multitude d’interventions vasculaires ou endovasculaires; pour des pontages divers, le traitement d’occlusions artérielles, la réparation d’anévrismes et la pose d’endoprothèses. L’objectif général de ce projet de recherche est de faciliter et réduire les risques des approches de l’artère fémorale par une meilleure compréhension anatomique du triangle fémoral. La méthodologie a été réalisée grâce à l’utilisation de cadavres spécialement embaumés par la méthode développée par Walter Thiel. Les résultats présentés dans ce mémoire ont permis de proposer des solutions en réponse à des problèmes cliniques en chirurgie vasculaire. Dans un premier temps, l’étude de la vascularisation cutanée du triangle fémoral a mené à proposer de nouvelles incisions chirurgicales afin de limiter la dévascularisation cutanée des plaies et ainsi réduire les problèmes de cicatrisation observés. Ensuite, nous avons validé l’identification radiographique et échographique de l’artère fémorale à son croisement avec le ligament inguinal afin de faciliter l’identification d’un site de ponction artérielle adéquat. Enfin, nous avons développé une méthode échographique simple qui facilite l’approche percutanée de l’artère fémorale, même chez les patients obèses. Les retombées de ce projet de recherche sont multiples pour les cliniciens, l’étude fournit une meilleure compréhension anatomique tridimensionnelle du triangle fémoral et les techniques proposées dans ce mémoire pourront apporter une amélioration de la pratique chirurgicale et faciliter le travail des médecins. Toutefois, ces propositions devront maintenant être validées en clinique.

Statistical model based 3D shape prediction of postoperative trunks for non-invasive scoliosis surgery planning

One of the major concerns of scoliosis patients undergoing surgical treatment is the aesthetic aspect of the surgery outcome. It would be useful to predict the postoperative appearance of the patient trunk in the course of a surgery planning process in order to take into account the expectations of the patient. In this paper, we propose to use least squares support vector regression for the prediction of the postoperative trunk 3D shape after spine surgery for adolescent idiopathic scoliosis. Five dimensionality reduction techniques used in conjunction with the support vector machine are compared. The methods are evaluated in terms of their accuracy, based on the leave-one-out cross-validation performed on a database of 141 cases. The results indicate that the 3D shape predictions using a dimensionality reduction obtained by simultaneous decomposition of the predictors and response variables have the best accuracy.

A physically based trunk soft tissue modeling for scoliosis surgery planning systems

One of the major concerns of scoliotic patients undergoing spinal correction surgery is the trunk's external appearance after the surgery. This paper presents a novel incremental approach for simulating postoperative trunk shape in scoliosis surgery. Preoperative and postoperative trunk shapes data were obtained using three-dimensional medical imaging techniques for seven patients with adolescent idiopathic scoliosis. Results of qualitative and quantitative evaluations, based on the comparison of the simulated and actual postoperative trunk surfaces, showed an adequate accuracy of the method. Our approach provides a candidate simulation tool to be used in a clinical environment for the surgery planning process.

Simulation of the postoperative trunk appearance in scoliosis surgery

Persistence of external trunk asymmetry after scoliosis surgical treatment is frequent and difficult to predict by clinicians. This is a significant problem considering that correction of the apparent deformity is a major factor of satisfaction for the patients. A simulation of the correction on the external appearance would allow the clinician to illustrate to the patient the potential result of the surgery and would help in deciding on a surgical strategy that could most improve his/her appearance. We describe a method to predict the scoliotic trunk shape after a spine surgical intervention. The capability of our method was evaluated using real data of scoliotic patients. Results of the qualitative evaluation were very promising and a quantitative evaluation based on the comparison of the simulated and the actual postoperative trunk surface showed an adequate accuracy for clinical assessment. The required short simulation time also makes our approach an eligible candidate for a clinical environment demanding interactive simulations.

Changes in Trunk Appearance After Scoliosis Spinal Surgery and Their Relation to Changes in Spinal Measurements

Study Design Retrospective study of surgical outcome. Objectives To evaluate quantitatively the changes in trunk surface deformities after scoliosis spinal surgery in Lenke 1A adolescent idiopathic scoliosis (AIS) patients and to compare it with changes in spinal measurements. Summary of Background Data Most studies documenting scoliosis surgical outcome used either radiographs to evaluate changes in the spinal curve or questionnaires to assess patients health-related quality of life. Because improving trunk appearance is a major reason for patients and their parents to seek treatment, this study focuses on postoperative changes in trunk surface deformities. Recently, a novel approach to quantify trunk deformities in a reliable, automatic, and noninvasive way has been proposed. Methods Forty-nine adolescents with Lenke 1A idiopathic scoliosis treated surgically were included. The back surface rotation and trunk lateral shift were computed on trunk surface acquisitions before and at least 6 months after surgery. We analyzed the effect of age, height, weight, curve severity, and flexibility before surgery, length of follow-up, and the surgical technique. For 25 patients with available three-dimensional (3D) spinal reconstructions, we compared changes in trunk deformities with changes in two-dimensional (2D) and 3D spinal measurements. Results The mean correction rates for the back surface rotation and the trunk lateral shift are 18% and 50%, respectively. Only the surgical technique had a significant effect on the correction rate of the back surface rotation. Direct vertebral derotation and reduction by spine translation provide a better correction of the rib hump (22% and 31% respectively) than the classic rod rotation technique (8%). The reductions of the lumbar Cobb angle and the apical vertebrae transverse rotation explain, respectively, up to 17% and 16% the reduction of the back surface rotation. Conclusions Current surgical techniques perform well in realigning the trunk; however, the correction of the deformity in the transverse plane proves to be more challenging. More analysis on the positive effect of vertebral derotation on the rib hump correction is needed. Level of evidence III.

Non-invasive quantitative assessment of scoliosis spinal surgery outcome

Improving the appearance of the trunk is an important goal of scoliosis surgical treatment, mainly in patients' eyes. Unfortunately, existing methods for assessing postoperative trunk appearance are rather subjective as they rely on a qualitative evaluation of the trunk shape. In this paper, an objective method is proposed to quantify the changes in trunk shape after surgery. Using a non-invasive optical system, the whole trunk surface is acquired and reconstructed in 3D. Trunk shape is described by two functional measurements spanning the trunk length: the lateral deviation and the axial rotation. To measure the pre and postoperative differences, a correction rate is computed for both measurements. On a cohort of 36 scoliosis patients with the same spinal curve type who underwent the same surgical approach, surgery achieved a very good correction of the lateral trunk deviation (median correction of 76%) and a poor to moderate correction of the back axial rotation (median correction of 19%). These results demonstrate that after surgery, patients are still confronted with residual trunk deformity, mainly a persisting hump on the back. That can be explained by the fact that current scoliosis assessment and treatment planning are based solely on radiographic measures of the spinal deformity and do not take trunk deformity into consideration. It is believed that with our novel quantitative trunk shape descriptor, clinicians and surgeons can now objectively assess trunk deformity and postoperative shape and propose new treatment strategies that could better address patients' concern about their appearance. © (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Video Object Tracking And Analysis For Computer Assisted Surgery

Pedicle screw insertion technique has made revolution in the surgical treatment of spinal fractures and spinal disorders. Although X- ray fluoroscopy based navigation is popular, there is risk of prolonged exposure to X- ray radiation. Systems that have lower radiation risk are generally quite expensive. The position and orientation of the drill is clinically very important in pedicle screw fixation. In this paper, the position and orientation of the marker on the drill is determined using pattern recognition based methods, using geometric features, obtained from the input video sequence taken from CCD camera. A search is then performed on the video frames after preprocessing, to obtain the exact position and orientation of the drill. An animated graphics, showing the instantaneous position and orientation of the drill is then overlaid on the processed video for real time drill control and navigation

Evaluation Of A Novel Method Of Real Time Computer Assisted Spine Surgery

In this paper the effectiveness of a novel method of computer assisted pedicle screw insertion was studied using testing of hypothesis procedure with a sample size of 48. Pattern recognition based on geometric features of markers on the drill has been performed on real time optical video obtained from orthogonally placed CCD cameras. The study reveals the exactness of the calculated position of the drill using navigation based on CT image of the vertebra and real time optical video of the drill. The significance value is 0.424 at 95% confidence level which indicates good precision with a standard mean error of only 0.00724. The virtual vision method is less hazardous to both patient and the surgeon

Collaborative design procedures for architects and engineers

This book argues for novel strategies to integrate engineering design procedures and structural analysis data into architectural design. Algorithmic procedures that recently migrated into the architectural practice are utilized to improve the interface of both disciplines. Architectural design is predominately conducted as a negotiation process of various factors but often lacks rigor and data structures to link it to quantitative procedures. Numerical structural design on the other hand could act as a role model for handling data and robust optimization but it often lacks the complexity of architectural design. The goal of this research is to bring together robust methods from structural design and complex dependency networks from architectural design processes. The book presents three case studies of tools and methods that are developed to exemplify, analyze and evaluate a collaborative work flow.

Translucent Procedures, Abstraction without Opacity

This report introduces TRANSLUCENT PROCEDURES as a new mechanism for implementing behavioral abstractions. Like an ordinary procedure, a translucent procedure can be invoked, and thus provides an obvious way to capture a BEHAVIOR. Translucent procedures, like ordinary procedures, can be manipulated as first-class objects and combined using functional composition. But unlike ordinary procedures, translucent procedures have structure that can be examined in well-specified non-destructive ways, without invoking the procedure.

Procedures as a Representation for Data in a Computer Program for Understanding Natural Language

This paper describes a system for the computer understanding of English. The system answers questions, executes commands, and accepts information in normal English dialog. It uses semantic information and context to understand discourse and to disambiguate sentences. It combines a complete syntactic analysis of each sentence with a "heuristic understander" which uses different kinds of information about a sentence, other parts of the discourse, and general information about the world in deciding what the sentence means. It is based on the belief that a computer cannot deal reasonably with language unless it can "understand" the subject it is discussing. The program is given a detailed model of the knowledge needed by a simple robot having only a hand and an eye. We can give it instructions to manipulate toy objects, interrogate it about the scene, and give it information it will use in deduction. In addition to knowing the properties of toy objects, the program has a simple model of its own mentality. It can remember and discuss its plans and actions as well as carry them out. It enters into a dialog with a person, responding to English sentences with actions and English replies, and asking for clarification when its heuristic programs cannot understand a sentence through use of context and physical knowledge.

Monitoring procedures in environmental geochemistry and compositional data analysis theory

First discussion on compositional data analysis is attributable to Karl Pearson, in 1897. However, notwithstanding the recent developments on algebraic structure of the simplex, more than twenty years after Aitchison’s idea of log-transformations of closed data, scientific literature is again full of statistical treatments of this type of data by using traditional methodologies. This is particularly true in environmental geochemistry where besides the problem of the closure, the spatial structure (dependence) of the data have to be considered. In this work we propose the use of log-contrast values, obtained by a simplicial principal component analysis, as LQGLFDWRUV of given environmental conditions. The investigation of the log-constrast frequency distributions allows pointing out the statistical laws able to generate the values and to govern their variability. The changes, if compared, for example, with the mean values of the random variables assumed as models, or other reference parameters, allow defining monitors to be used to assess the extent of possible environmental contamination. Case study on running and ground waters from Chiavenna Valley (Northern Italy) by using Na+, K+, Ca2+, Mg2+, HCO3-, SO4 2- and Cl- concentrations will be illustrated