Research on Bearing Capacity Calculation Method of Large Diameter Cylinder in Soft Clay

A large diameter cylinder inserted in soils is a new type of engineering structures used in offshore and port engineering. The mechanism of its bearing capacity and the analysis of its stability are important to its design and applications. In this paper, the finite element method is used to analyze the reacting forces of the soft soil foundation on the structure under the wave action. A simplified method is proposed, based on the plastic limit method, for the safety and stability analysis. Our analysis shows that the assumptions made in this paper and the mechanism used are reasonable, and the results obtained are appropriate. The calculation method is very efficient and can be used to evaluate main parameters of the structure in its preliminary designs.

Basic equations for ferroelectrics

A set of new formula of energy functions for ferroelectrics was proposed, and then the new basic equations were derived in this paper. The finite element formulation based on the new basic equations was improved to avoid the equivalent nodal load produced by remnant polarization. With regard to the fundamentals of mathematics and physics, the new energy functions and basic equations are reasonable for the material element of ferroelectrics in finite element analysis.

Subsonic interface crack with crack face contact

A steady-state subsonic interface crack propagating between an elastic solid and a rigid substrate with crack face contact is studied. Two cases with respective to the contact length are considered, i.e., semi-infinite and finite crack face contact. Different from a stationary or an open subsonic interface crack, stress singularity at the crack tip in the present paper is found to be non-oscillatory. Furthermore, in the semi-infinite contact case, the singularity of the stress field near the crack tip is less than 1/2. In the finite contact case, no singularity exists near the crack tip, but less than 1/2 singularity does at the end of the contact zone. In both cases, the singularity depends on the linear contact coefficient and the crack speed. Asymptotic solutions near the crack tip are given and analyzed. In order to satisfy the contact conditions, reasonable region of the linear contact coefficient is found. In addition, the solution predicts a non-zero-energy dissipation rate due to crack face contact.

Effects of temperature on the threshold of phosphorus for algal blooms

Algal blooms, worsening marine ecosystems and causing great economic loss, have been paid much attention to for a long time. Such environmental factors as light penetration, water temperature, and nutrient concentration are crucial in blooms processes. Among them, only nutrients can be controlled. Therefore, the threshold of nutrients for algal blooms is of great concern. To begin with, a dynamic eutrophication model has been constructed to simulate the algal growth and phosphorus cycling. The model encapsulates the essential biological processes of algal growth and decay, and phosphorus regeneration due to algal decay. The nutrient limitation is based upon commonly used Monod's kinetics. The effects of temperature and phosphorus limitation are particularly addressed. Then, we have endeavored to elucidate the threshold of phosphorus at different temperature for algal blooms. Based on the numerical simulation, the isoquant contours of change rate of alga as shown in the figure are obtained, which obviously demonstrate the threshold of nutrient at an arbitrary reasonable temperature. The larger the change rate is, the more rapidly the alga grows. If the phosphorus concentration at a given temperature remains larger than the threshold the algal biomass may increase monotonically, leading to the algal blooming. With the rising of temperature, the threshold is apparently reduced, which may explain why likely red tide disasters occur in a fine summer day. So, high temperature and sufficient phosphorus supply are the major factors which result in algal growth and blowout of red tide.

Dealing with Energy-QoE Trade-Offs in Mobile Video

Scalable video coding allows an efficient provision of video services at different quality levels with different energy demands. According to the specific type of service and network scenario, end users and/or operators may decide to choose among different energy versus quality combinations. In order to deal with the resulting trade-off, in this paper we analyze the number of video layers that are worth to be received taking into account the energy constraints. A single-objective optimization is proposed based on dynamically selecting the number of layers, which is able to minimize the energy consumption with the constraint of a minimal quality threshold to be reached. However, this approach cannot reflect the fact that the same increment of energy consumption may result in different increments of visual quality. Thus, a multiobjective optimization is proposed and a utility function is defined in order to weight the energy consumption and the visual quality criteria. Finally, since the optimization solving mechanism is computationally expensive to be implemented in mobile devices, a heuristic algorithm is proposed. This way, significant energy consumption reduction will be achieved while keeping reasonable quality levels.

Designing Spaces for Effective Learning: A guide to 21st century learning space design

Increasing investment in estate and learning technologies, combined with the need for more cost-effective space utilisation, is making it increasingly important for senior managers to keep abreast of new thinking about the design of technology-rich learning spaces. Designing Spaces for Effective Learning, one of a series of guides, was launched at the JISC Conference 2006 which helped to meet this need. A visually-rich publication, it was designed to promote better understanding of what makes an effective design for the 21 century and to summarise the key points to consider when approaching a refurbishment or new-build project. The publication takes the reader on a ’walk through’ an educational institution, exploring the relationship between learning technologies and innovative examples of physical space design at each stage of the journey. Discussion of the key points is illustrated by ten case studies from further and higher education, and floor plans from AMA Alexi Marmot Associates, architects and space planners, which provide up-to-date guidelines on the integration of technologies into teaching and learning accommodation.

Nassau grouper (Epinephelus striatus) spawning aggregations: hydroacoustic surveys and geostatistical analysis

With the near extinction of many spawning aggregations of large grouper and snapper throughout the Caribbean, Gulf of Mexico, and tropical Atlantic, we need to provide baselines for their conservation. Thus, there is a critical need to develop techniques for rapidly assessing the remaining known (and unknown) aggregations. To this end we used mobile hydroacoustic surveys to estimate the density, spatial extent, and total abundance of a Nassau grouper spawning aggregation at Little Cayman Island, Cayman Islands, BWI. Hydroacoustic estimates of abundance, density, and spatial extent were similar on two sampling occasions. The location and approximate spatial extent of the Nassau grouper spawning aggregation near the shelf-break was corroborated by diver visual observations. Hydroacoustic density estimates were, overall, three-times higher than the average density observed by divers; however, we note that in some instances diver-estimated densities in localized areas were similar to hydroacoustic density estimates. The resolution of the hydroacoustic transects and geostatistical interpolation may have resulted in over-estimates in fish abundance, but still provided reasonable estimates of total spatial extent of the aggregation. Limitations in bottom time for scuba and visibility resulted in poor coverage of the entire Nassau grouper aggregation and low estimates of abundance when compared to hydroacoustic estimates. Although the majority of fish in the aggregation were well off bottom, fish that were sometimes in close proximity to the seafloor were not detected by the hydroacoustic survey. We conclude that diver observations of fish spawning aggregations are critical to interpretations of hydroacoustic surveys, and that hydroacoustic surveys provide a more accurate estimate of overall fish abundance and spatial extent than diver observations. Thus, hydroacoustics is an emerging technology that, when coupled with diver observations, provides a comprehensive survey method for monitoring spawning aggregations of fish.

Odontocete Stranding Patterns in the Main Hawaiian Islands 1937–2002): how do they compare with live animal surveys?

In this study we (1) synthesized 65 yr of odontocete stranding data around the main Hawaiian Islands (1937–2002); (2) analyzed stranding patterns and trends over time; and (3) compared occurrence patterns based on sightings of live animals with stranding data and evaluated the compatibility of these data sets. From 1937 to 2002, 202 odontocete strandings were recorded by the National Marine Fisheries Service, Pacific Islands Regional Office. Strandings increased through time due to increased reporting effort and occurred throughout the year. The four most common of 16 species reported were Kogia spp. (18%), spinner dolphins (Stenella longirostris) (15%), striped dolphins (Stenella coeruleoalba) (11%), and sperm whales (Physeter macrocephalus) (10%). The highest proportion of strandings was recorded on O‘ahu (48%), followed by Maui/La¯na‘i (24%), Kaua‘i (12%), Hawai‘i (11%), and Moloka‘i (5%). Comparison with four previously published live animal survey studies suggests that stranding records are a good indicator of species composition and yield reasonable data on the frequency of occurrence of species in the region they cover.

Distribution, Abundance, and Biological Characteristics of Groundfish off the Coast of Washington, Oregon, and California, 1977-1986

We compare results of bottom trawl surveys off Washington, Oregon, and California in 1977, 1980, 1983, and 1986 to discern trends in population abundance, distribution, and biology. Catch per unit of effort, area-swept biomass estimates, and age and length compositions for 12 commercially important west coast groundfishes are presented to illustrate trends over the lO-year period. We discuss the precision, accuracy, and statistical significance of observed trends in abundance estimates. The influence of water temperature on the distribution of groundfishes is also briefly examined. Abundance estimates of canary rockfish, Sebastes pinniger, and yellowtail rockfish, S. Jlavidus, declined during the study period; greater declines were observed in Pacific ocean perch, S. alutus, lingcod, Ophiodon elongatus, and arrowtooth flounder, Atheresthes stomias. Biomass estimates of Pacific hake, Merluccius productus, and English, rex, and Dover soles (Pleuronectes vetulus, Errex zachirus, and Microstomus pacificus) increased, while bocaccio, S. paucispinis, and chilipepper, S. goodei, were stable. Sablefish, Anoplopoma fimbria, biomass estimates increased markedly from 1977 to 1980 and declined moderately thereafter. Precision was lowest for rockfishes, lingcod, and sablefish; it was highest for flatfishes because they were uniformly distributed. The accuracy of survey estimates could be gauged only for yellowtail and canary rockfish and sablefish. All fishery-based analyses produced much larger estimates of abundance than bottom trawl surveys-indicative of the true catchability of survey trawls. Population trends from all analyses compared well except in canary rockfish, the species that presents the greatest challenge to obtaining reasonable precision and one that casts doubts on the usefulness of bottom trawl surveys for estimating its abundance. (PDF file contains 78 pages.)

Income Taxation and Growth in an OLG Economy: Does Aggregate Uncertainty Play any Role?

We analyze the effects of capital income taxation on long-run growth in a stochastic, two-period overlapping generations economy. Endogenous growth is driven by a positive externality of physical capital in the production sector that makes firms exhibit an aggregate technology in equilibrium. We distinguish between capital income and labor income, and between attitudes towards risk and intertemporal substitution of consumption. We show necessary and sufficient conditions such that i) increments in the capital income taxation lead to higher equilibrium growth rates, and ii) the effect of changes in the capital income tax rate on the equilibrium growth may be of opposite signs in stochastic and in deterministic economies. Such a sign reversal is shown to be more likely depending on i) how the intertemporal elasticity of substitution compares to one, and ii) the size of second- period labor supply. Numerical simulations show that for reasonable values of the intertemporal elasticity of substitution, a sign reversal shows up only for implausibly high values of the second- period’s labor supply. The conclusion is that deterministic OLG economies are a good approximation of the effect of taxes on the equilibrium growth rate as in Smith (1996).

Role of G protein coupled inwardly rectifier K+ channels (GIRK) on the neurobiology depression

353 págs.

Zum tierschutzgerechten Betäuben und Töten von Aal

Slaughtering of eels should be done not only under animal welfare aspects but as well under consumer protection and economical aspects with respect to technical feasibility. Methods must be practicable for enterprises slaughtering quantities of several kilograms up to several tons per day. Most methods applied up to now in whole Europe were (are) not in accordance with animal welfare mainly due to lacking prescriptions and alternative methods. The great number of experiments carried out within the frame of this project demonstrates the difficulties to combine optimal welfare demands with economical and technical fesibility aspects in one method. Measurements of EEG (electroencephalogram) and ECG (electrocardiogram) have shown that the method laid down in the german legislation does not perfectly stun all eels. This method was improved by applying a „prestun“ with 220 V for 1sec., followed by a 5 min phase at 45 V to prolongue the time of unconsciousness after the stun. Inflating nitrogen gas into the stunning bath additionally causes asphyxia during the stun. By this method 93% of the eels were stunned or even killed. Applying 220 V for bigger batches of eels (~400 kg) will cause big problems with the energy supply. Therefore this method is restricted to batches of 20 - 50 kg. The method laid down in the german legislation probably can be improved. Eels were stunned successfully without water, avoiding the problems of regional differences in the conductivity of the water. Other types of current and other frequencies and a combination of both should be tested as well as alternative electrode geometries also with respect to blood spots which occasionally occurred in the muscles preferably of bigger eels (>800 g). For the time being the method laid down in the german legislation is a reasonable compromise and under animal welfare aspects represents a considerable improvement.

On the contact width in generalized plain strain JKR model for isotropic solids

Adhesive contact model between an elastic cylinder and an elastic half space is studied in the present paper, in which an external pulling force is acted on the above cylinder with an arbitrary direction and the contact width is assumed to be asymmetric with respect to the structure. Solutions to the asymmetric model are obtained and the effect of the asymmetric contact width on the whole pulling process is mainly discussed. It is found that the smaller the absolute value of Dundurs' parameter beta or the larger the pulling angle theta, the more reasonable the symmetric model would be to approximate the asymmetric one.

Euler Solution Using Adaptive Cartesian Grid With A Gridless Boundary Treatment

A quadtree-based adaptive Cartesian grid generator and flow solver were developed. The grid adaptation based on pressure or density gradient was performed and a gridless method based on the least-square fashion was used to treat the wall surface boundary condition, which is generally difficult to be handled for the common Cartesian grid. First, to validate the technique of grid adaptation, the benchmarks over a forward-facing step and double Mach reflection were computed. Second, the flows over the NACA 0012 airfoil and a two-element airfoil were calculated to validate the developed gridless method. The computational results indicate the developed method is reasonable for complex flows.

Dissipative particle dynamics simulation of wettability alternation phenomena in the chemical flooding process

Wettability alternation phenomena is considered one of the most important enhanced oil recovery (EOR) mechanisms in the chemical flooding process and induced by the adsorption of surfactant on the rock surface. These phenomena are studied by a mesoscopic method named as dissipative particle dynamics (DPD). Both the alteration phenomena of water-wet to oil-wet and that of oil-wet to water-wet are simulated based on reasonable definition of interaction parameters between beads. The wetting hysteresis phenomenon and the process of oil-drops detachment from rock surfaces with different wettability are simulated by adding long-range external forces on the fluid particles. The simulation results show that, the oil drop is liable to spread on the oil-wetting surface and move in the form of liquid film flow, whereas it is likely to move as a whole on the water-wetting surface. There are the same phenomena occuring in wettability-alternated cases. The results also show that DPD method provides a feasible approach to the problems of seepage flow with physicochemical phenomena and can be used to study the mechanism of EOR of chemical flooding.