Studies on oxamyl : analytical method development and investigation of fate in peach seedlings and corn seeds

A high performance liquid chromatographic method employing two columns connected in series and separated~y·a.switching valve has been developed for the analysis of the insecticide/ nematicide oxamyl (methyl-N' ,N'-dimethyl-N-[(methylcarbamoyl) oxy]-l-thiooxarnimidate) and two of its metabolites. A variation of this method involving two reverse phase columns was employed to monitor the persistence and translocation of oxamyl in treated peach seedlings. It was possible to simultaneously analyse for oxamyl and its corresponding oxime (methyl-N',N'-dimethyl-N-hydroxy-l-thiooxamimidate}, a major metabolite of oxamyl in plants, without prior cleanup of the samples. The method allowed detection of 0.058 pg oxamyl and 0.035 p.g oxime. On treated peach leaves oxamyl was found to dissipate rapidly during the first two-week period, followed by a period of slow decomposition. Movement of oxamyl or its oxime did not occur in detectable quantities to untreated leaves or to the root or soil. A second variation of the method which employed a size exclusion column as·the first column and a reverse phase column as the second was used to monitor the degradation of oxamyl in treated, planted corn seeds and was suitable for simultaneous analysis of oxamyl, its oxime and dimethylcyanoformamide (DMCF), a metabolite of oxamyl. The method allowed detection of 0.02 pg oxamyl, 0.02 p.g oxime and 0.005 pg DMCF. Oxamyl was found to persist for a period of 5 - 6 weeks, which is long enough to permit oxamyl seedtreatment to be considered as a potential means of protecting young corn plants from nematode attack. Decomposition was found to be more rapid in unsterilized soil than in sterililized soil. DMCF was found to have a nematostatic effect at high concentrations ( 2,OOOpprn), but at lower concentrations no effect on nematode mobility was observed. Oxamyl, on the other hand, was found to reduce the mobility of nematodes at concentrations down to 4 ppm.

The assessment of self-directed learning among pre-service students in an Ontario faculty of education

The study determined students' perceptions of self-directed learning in their courses. Tests to assess perceptions are not being used in many programs. Assessments such as the Self-Directed Readiness Scale (SDLRS) and the Oddi continuing Learning Inventory (OCLI) have weaknesses that may have affected the use of tests. In this study, the creation of the Self-Directed Learning Test (SDLT) monitored students' perceptions by addressing what students were told before registration, how much input students had in developing the structure of the course, how much input students have in determining the evaluation for the course, what style of learning is taking place, and the characteristics of learning found among students. Fifty-one students in the pre-service program at Brock University completed the SDLT. Results showed that 47.1% of the sample liked self-directed learning. Several students who stated that they did not like selfdirected learning did not know what self-directed learning was. Results supported Brookfield's (1986) claim for more education on what self-directed learning is. The study did not support Knowles' (1980) assumption that adult students know and want to follow self-directed approaches to learning. The SDLT is a good method for monitoring self-directed learning and how students perceive their courses.

Development of a New Assessment System to Evaluate Students' English Communicative Capacities in China

The purpose of this study was to develop a new English assessment system to evaluate Chinese students' English communicative capacities. Since there is more interaction with people from English-speaking countries, Chinese people attach more importance to English oral skills, and a lot of Western English teaching methods were introduced into China to improve students' English communicative capacities. However, traditional paper-written examinations, like the English test of higher education entry examination, cannot evaluate it effectively. This study explored the perceptions of two Chinese English-language teachers and two Chinese students about English assessment system. A qualitative research method using telephone interviews was conducted in this study. The findings showed that the most possible ways to assess Chinese students' English communicative capacities were paper-written examination and person-machine conversations, although measures should be taken to improve these two models. On the other hand, the model of person-person conversation was the ideal assessment tool but was hard to achieve at the current stage.

Investigating Multiple-Choice Assessment: Secondary School Teachers' Perceptions and Practices

Multiple-choice assessment is used within nearly all levels of education and is often heavily relied upon within both secondary and postsecondary institutions in determining a student’s present and future success. Understanding why it is effective or ineffective, how it is developed, and when it is or is not used by teachers can further inform teachers’ assessment practices, and subsequently, improve opportunities for student success. Twenty-eight teachers from 3 secondary schools in southern Ontario were interviewed about their perceptions and use of multiple-choice assessment and participated in a single-session introductory workshop on this topic. Perceptions and practices were revealed, discussed, and challenged through the use of a qualitative research method and examined alongside existing multiple-choice research. Discussion centered upon participants’ perspectives prior to and following their participation in the workshop. Implications related to future assessment practices and research in this field of assessment were presented. Findings indicated that many teachers utilized the multiple-choice form of assessment having had very little teacher education coursework or inservice professional development in the use of this format. The findings also revealed that teachers were receptive to training in this area but simply had not been exposed to or been given the opportunity to further develop their understanding. Participants generally agreed on its strengths (e.g., objectivity) and weaknesses (e.g., development difficulty). Participants were particularly interested in the potential for this assessment format to assess different levels of cognitive difficulty (i.e., levels beyond remembering of Bloom’s revised taxonomy), in addition to its potential to perhaps provide equitable means for assessing students of varying cultures, disabilities, and academic streams.

Globalization and Its Impact on Assessment: Moving Toward a New Story

Globalization has resulted in large-scale international and local assessments closely tied to notions of accountability and competitiveness in a globalized economy. Although policy makers seek to ensure citizens meet the demands of a global knowledge-based economy, such assessments may also impede the development of requisite 21st century skills. While standardization currently is viewed as the most effective measurement of student achievement, several Canadian and international jurisdictions are moving toward assessment for learning (AfL). This conceptual study sought to identify whether AfL or standardized assessment most effectively meets 21st century learning goals in the wake of rapid global change. It applies a Story Model theoretical framework to understand the current, the new emerging, and the future ideal story of education from a personal, cultural, and global lens. The study examines the main critiques and/or challenges of standardized testing, the benefits of AfL for student learning, and new teaching and assessment approaches to the development of 21st century learning goals. The study applies the Story Model’s inside-outside/past-future approach to determine the future direction of assessment. Results show that the new story of assessment will most likely entail a model that integrates both standardized testing and in-class assessments in the form of AfL and PBL.

Empirical Assessment of an Intertemporal Option Pricing Model with Latent variables

This paper assesses the empirical performance of an intertemporal option pricing model with latent variables which generalizes the Hull-White stochastic volatility formula. Using this generalized formula in an ad-hoc fashion to extract two implicit parameters and forecast next day S&P 500 option prices, we obtain similar pricing errors than with implied volatility alone as in the Hull-White case. When we specialize this model to an equilibrium recursive utility model, we show through simulations that option prices are more informative than stock prices about the structural parameters of the model. We also show that a simple method of moments with a panel of option prices provides good estimates of the parameters of the model. This lays the ground for an empirical assessment of this equilibrium model with S&P 500 option prices in terms of pricing errors.

Psychiatric symptoms in idiopathic rapid-eye-movement sleep behaviour disorder

Le trouble comportemental en sommeil paradoxal (TCSP) idiopathique est caractérisé par une activité motrice indésirable et souvent violente au cours du sommeil paradoxal. Le TCSP idiopathique est considéré comme un facteur de risque de certaines maladies neurodégénératives, particulièrement la maladie de Parkinson (MP) et la démence à corps de Lewy (DCL). La dépression et les troubles anxieux sont fréquents dans la MP et la DCL. L’objectif de cette étude est d’évaluer la sévérité des symptômes dépressifs et anxieux dans le TCSP idiopathique. Cinquante-cinq patients avec un TCSP idiopathique sans démence ni maladie neurologique et 63 sujets contrôles ont complété la seconde édition du Beck Depression Inventory (BDI-II) et le Beck Anxiety Inventory (BAI). Nous avons aussi utilisé le BDI for Primary Care (BDI-PC) afin de minimiser la contribution des facteurs confondant dans les symptômes dépressifs. Les patients avec un TCSP idiopathique ont obtenu des scores plus élevés que les sujets contrôles au BDI-II (9.63 ± 6.61 vs. 4.32 ± 4.58; P < 0.001), au BDI-PC (2.20 ± 2.29 vs. 0.98 ± 1.53; P = 0.001) et au BAI (8.37 ± 7.30 vs. 3.92 ± 5.26; P < 0.001). Nous avons également trouvé une proportion plus élevée des sujets ayant des symptômes dépressifs (4/63 ou 6% vs. 12/55 ou 22%; P = 0.03) ou anxieux (9/50 or 18% vs. 21/43 ou 49%; P = 0.003) cliniquement significatifs. La proportion des sujets ayant des symptômes dépressifs cliniquement significatifs ne change pas en utilisant le BDI-PC (11/55 or 20%) Les symptômes dépressifs et anxieux sont fréquents dans le TCSP idiopathique. L’examen de routine des patients avec un TCSP idiopathique devrait inclure un dépistage systématique des symptômes dépressifs et anxieux afin de les prévenir ou les traiter.

Indirect Bonding Method: in vitro Comparison of the Shear Bond Strength between Metallic Orthodontic Brackets and Different Porcelain Surface Preparations

Introduction : La force d’adhésion à l'interface métal-céramique avec les résines auto-polymérisantes destinées au collage indirect des boîtiers orthodontiques n'a pas été évaluée à ce jour et un protocole clinique basé sur la littérature scientifique est inexistant. Objectifs : 1) Comparer la force de cisaillement maximale entre des boîtiers métalliques et des surfaces en porcelaine préparées selon différentes méthodes; 2) Suggérer un protocole clinique efficace et prévisible. Matériel et méthodes : Quatre-vingt-dix disques en leucite (6 groupes; n = 15/groupe) ont été préparés selon 6 combinaisons de traitements de surface : mécaniques (+ / - fraisage pour créer les rugosités) et chimiques (acide fluorhydrique, apprêt, silane). Des bases en résine composite Transbond XT (3M Unitek, Monrovia, California) faites sur mesure ont été collées avec le système de résine adhésive auto-polymérisante Sondhi A + B Rapid Set (3M Unitek, Monrovia, California). Les échantillons ont été préservés (H2O/24hrs), thermocyclés (500 cycles) et testés en cisaillement (Instron, Norwood, Massachusetts). Des mesures d’Index d’adhésif résiduel (IAR) ont été compilées. Des tests ANOVAs ont été réalisés sur les rangs étant donné que les données suivaient une distribution anormale et ont été ajustés selon Tukey. Un Kruskall-Wallis, U-Mann Whitney par comparaison pairée et une analyse de Weibull ont aussi été réalisés. Résultats : Les médianes des groupes varient entre 17.0 MPa (- fraisage + acide fluorhydrique) à 26.7 MPa (- fraisage + acide fluorhydrique + silane). Le fraisage en surface ne semble pas affecter l’adhésion. La combinaison chimique (- fraisage + silane + apprêt) a démontré des forces de cisaillement significativement plus élevées que le traitement avec (- fraisage + acide fluorhydrique), p<0,05, tout en possédant des forces similaires au protocole typiquement suggéré à l’acide fluorhydrique suivi d’une application de silane, l’équivalence de (- fraisage + acide fluorhydrique + silane). Les mesures d’IAR sont significativement plus basses dans le groupe (- fraisage + acide fluorhydrique) en comparaison avec celles des 5 autres groupes, avec p<0,05. Malheureusement, ces 5 groupes ont des taux de fracture élévés de 80 à 100% suite à la décimentation des boîtiers. Conclusion : Toutes les combinaisons de traitement de surface testées offrent une force d’adhésion cliniquement suffisante pour accomplir les mouvements dentaires en orthodontie. Une application de silane suivie d’un apprêt est forte intéressante, car elle est simple à appliquer cliniquement tout en permettant une excellente adhésion. Il faut cependant avertir les patients qu’il y a un risque de fracture des restorations en céramique lorsque vient le moment d’enlever les broches. Si la priorité est de diminuer le risque d’endommager la porcelaine, un mordançage seul à l’acide hydrofluorique sera suffisant.

Assessment of Tandem Mass Spectrometry and High Resolution Mass Spectrometry for the Analysis of Bupivacaine in Plasma

Triple quadrupole mass spectrometers coupled with high performance liquid chromatography are workhorses in quantitative bioanalyses. It provides substantial benefits including reproducibility, sensitivity and selectivity for trace analysis. Selected Reaction Monitoring allows targeted assay development but data sets generated contain very limited information. Data mining and analysis of non-targeted high-resolution mass spectrometry profiles of biological samples offer the opportunity to perform more exhaustive assessments, including quantitative and qualitative analysis. The objectives of this study was to test method precision and accuracy, statistically compare bupivacaine drug concentration in real study samples and verify if high resolution and accurate mass data collected in scan mode can actually permit retrospective data analysis, more specifically, extract metabolite related information. The precision and accuracy data presented using both instruments provided equivalent results. Overall, the accuracy was ranging from 106.2 to 113.2% and the precision observed was from 1.0 to 3.7%. Statistical comparisons using a linear regression between both methods reveal a coefficient of determination (R2) of 0.9996 and a slope of 1.02 demonstrating a very strong correlation between both methods. Individual sample comparison showed differences from -4.5% to 1.6% well within the accepted analytical error. Moreover, post acquisition extracted ion chromatograms at m/z 233.1648 ± 5 ppm (M-56) and m/z 305.2224 ± 5 ppm (M+16) revealed the presence of desbutyl-bupivacaine and three distinct hydroxylated bupivacaine metabolites. Post acquisition analysis allowed us to produce semiquantitative evaluations of the concentration-time profiles for bupicavaine metabolites.

Assessment of meat authenticity using bioinformatics, targeted peptide biomarkers and high-resolution mass spectrometry

In recent years, we observed a significant increase of food fraud ranging from false label claims to the use of additives and fillers to increase profitability. Recently in 2013, horse and pig DNA were detected in beef products sold from several retailers. Mass spectrometry has become the workhorse in protein research and the detection of marker proteins could serve for both animal species and tissue authentication. Meat species authenticity will be performed using a well defined proteogenomic annotation, carefully chosen surrogate tryptic peptides and analysis using a hybrid quadrupole-Orbitrap mass spectrometer. Selected mammalian meat samples were homogenized, proteins were extracted and digested with trypsin. The samples were analyzed using a high-resolution mass spectrometer. The chromatography was achieved using a 30 minutes linear gradient along with a BioBasic C8 100 × 1 mm column at a flow rate of 75 µL/min. The mass spectrometer was operated in full-scan high resolution and accurate mass. MS/MS spectra were collected for selected proteotypic peptides. Muscular proteins were methodically analyzed in silico in order to generate tryptic peptide mass lists and theoretical MS/MS spectra. Following a comprehensive bottom-up proteomic analysis, we were able to detect and identify a proteotypic myoglobin tryptic peptide [120-134] for each species with observed m/z below 1.3 ppm compared to theoretical values. Moreover, proteotypic peptides from myosin-1, myosin-2 and -hemoglobin were also identified. This targeted method allowed a comprehensive meat speciation down to 1% (w/w) of undesired product.

Reliability of a quantitative clinical posture assessment tool among persons with idiopathic scoliosis

Objective To determine overall, test–retest and inter-rater reliability of posture indices among persons with idiopathic scoliosis. Design A reliability study using two raters and two test sessions. Setting Tertiary care paediatric centre. Participants Seventy participants aged between 10 and 20 years with different types of idiopathic scoliosis (Cobb angle 15 to 60°) were recruited from the scoliosis clinic. Main outcome measures Based on the XY co-ordinates of natural reference points (e.g. eyes) as well as markers placed on several anatomical landmarks, 32 angular and linear posture indices taken from digital photographs in the standing position were calculated from a specially developed software program. Generalisability theory served to estimate the reliability and standard error of measurement (SEM) for the overall, test–retest and inter-rater designs. Bland and Altman's method was also used to document agreement between sessions and raters. Results In the random design, dependability coefficients demonstrated a moderate level of reliability for six posture indices (ϕ = 0.51 to 0.72) and a good level of reliability for 26 posture indices out of 32 (ϕ ≥ 0.79). Error attributable to marker placement was negligible for most indices. Limits of agreement and SEM values were larger for shoulder protraction, trunk list, Q angle, cervical lordosis and scoliosis angles. The most reproducible indices were waist angles and knee valgus and varus. Conclusions Posture can be assessed in a global fashion from photographs in persons with idiopathic scoliosis. Despite the good reliability of marker placement, other studies are needed to minimise measurement errors in order to provide a suitable tool for monitoring change in posture over time.

Personalized 3D reconstruction of the rib cage for clinical assessment of trunk deformities

Scoliosis is a 3D deformity of the spine and rib cage. Extensive validation of 3D reconstruction methods of the spine from biplanar radiography has already been published. In this article, we propose a novel method to reconstruct the rib cage, using the same biplanar views as for the 3D reconstruction of the spine, to allow clinical assessment of whole trunk deformities. This technique uses a semi-automatic segmentation of the ribs in the postero-anterior X-ray view and an interactive segmentation of partial rib edges in the lateral view. The rib midlines are automatically extracted in 2D and reconstructed in 3D using the epipolar geometry. For the ribs not visible in the lateral view, the method predicts their 3D shape. The accuracy of the proposed method has been assessed using data obtained from a synthetic bone model as a gold standard and has also been evaluated using data of real patients with scoliotic deformities. Results show that the reconstructed ribs enable a reliable evaluation of the rib axial rotation, which will allow a 3D clinical assessment of the spine and rib cage deformities.

Non-invasive quantitative assessment of scoliosis spinal surgery outcome

Improving the appearance of the trunk is an important goal of scoliosis surgical treatment, mainly in patients' eyes. Unfortunately, existing methods for assessing postoperative trunk appearance are rather subjective as they rely on a qualitative evaluation of the trunk shape. In this paper, an objective method is proposed to quantify the changes in trunk shape after surgery. Using a non-invasive optical system, the whole trunk surface is acquired and reconstructed in 3D. Trunk shape is described by two functional measurements spanning the trunk length: the lateral deviation and the axial rotation. To measure the pre and postoperative differences, a correction rate is computed for both measurements. On a cohort of 36 scoliosis patients with the same spinal curve type who underwent the same surgical approach, surgery achieved a very good correction of the lateral trunk deviation (median correction of 76%) and a poor to moderate correction of the back axial rotation (median correction of 19%). These results demonstrate that after surgery, patients are still confronted with residual trunk deformity, mainly a persisting hump on the back. That can be explained by the fact that current scoliosis assessment and treatment planning are based solely on radiographic measures of the spinal deformity and do not take trunk deformity into consideration. It is believed that with our novel quantitative trunk shape descriptor, clinicians and surgeons can now objectively assess trunk deformity and postoperative shape and propose new treatment strategies that could better address patients' concern about their appearance. © (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Capillary electrophoresis characterisation of a rapid prototyped PMMA chip for particle analysis

Màster en Nanociència i Nanotecnologia

Rapid and Proactive Approach on Exploration of Database Vulnerabilities

In today's complicated computing environment, managing data has become the primary concern of all industries. Information security is the greatest challenge and it has become essential to secure the enterprise system resources like the databases and the operating systems from the attacks of the unknown outsiders. Our approach plays a major role in detecting and managing vulnerabilities in complex computing systems. It allows enterprises to assess two primary tiers through a single interface as a vulnerability scanner tool which provides a secure system which is also compatible with the security compliance of the industry. It provides an overall view of the vulnerabilities in the database, by automatically scanning them with minimum overhead. It gives a detailed view of the risks involved and their corresponding ratings. Based on these priorities, an appropriate mitigation process can be implemented to ensure a secured system. The results show that our approach could effectively optimize the time and cost involved when compared to the existing systems