The t-SNAREs syntaxin 1 and SNAP-25 are present on organelles that participate in synaptic vesicle recycling

Syntaxin 1 and synaptosome-associated protein of 25 kD (SNAP-25) are neuronal plasmalemma proteins that appear to be essential for exocytosis of synaptic vesicles (SVs). Both proteins form a complex with synaptobrevin, an intrinsic membrane protein of SVs. This binding is thought to be responsible for vesicle docking and apparently precedes membrane fusion. According to the current concept, syntaxin 1 and SNAP-25 are members of larger protein families, collectively designated as target-SNAP receptors (t-SNAREs), whose specific localization to subcellular membranes define where transport vesicles bind and fuse. Here we demonstrate that major pools of syntaxin 1 and SNAP-25 recycle with SVs. Both proteins cofractionate with SVs and clathrin-coated vesicles upon subcellular fractionation. Using recombinant proteins as standards for quantitation, we found that syntaxin 1 and SNAP-25 each comprise approximately 3% of the total protein in highly purified SVs. Thus, both proteins are significant components of SVs although less abundant than synaptobrevin (8.7% of the total protein). Immunoisolation of vesicles using synaptophysin and syntaxin specific antibodies revealed that most SVs contain syntaxin 1. The widespread distribution of both syntaxin 1 and SNAP-25 on SVs was further confirmed by immunogold electron microscopy. Botulinum neurotoxin C1, a toxin that blocks exocytosis by proteolyzing syntaxin 1, preferentially cleaves vesicular syntaxin 1. We conclude that t-SNAREs participate in SV recycling in what may be functionally distinct forms.

First day of an oil spill on the open sea: early mass transfers of hydrocarbons to air and water.

During the first hours after release of petroleum at sea, crude oil hydrocarbons partition rapidly into air and water. However, limited information is available about very early evaporation and dissolution processes. We report on the composition of the oil slick during the first day after a permitted, unrestrained 4.3 m(3) oil release conducted on the North Sea. Rapid mass transfers of volatile and soluble hydrocarbons were observed, with >50% of ≤C17 hydrocarbons disappearing within 25 h from this oil slick of <10 km(2) area and <10 μm thickness. For oil sheen, >50% losses of ≤C16 hydrocarbons were observed after 1 h. We developed a mass transfer model to describe the evolution of oil slick chemical composition and water column hydrocarbon concentrations. The model was parametrized based on environmental conditions and hydrocarbon partitioning properties estimated from comprehensive two-dimensional gas chromatography (GC×GC) retention data. The model correctly predicted the observed fractionation of petroleum hydrocarbons in the oil slick resulting from evaporation and dissolution. This is the first report on the broad-spectrum compositional changes in oil during the first day of a spill at the sea surface. Expected outcomes under other environmental conditions are discussed, as well as comparisons to other models.

Controls on ostracod valve geochemistry: Part 2. Carbon and oxygen isotope compositions

The stable carbon and oxygen isotope compositions of fossil ostracods are powerful tools to estimate past environmental and climatic conditions. The basis for such interpretations is that the calcite of the valves reflects the isotopic composition of water and its temperature of formation. However, calcite of ostracods is known not to form in isotopic equilibrium with water and different species may have different offsets from inorganic precipitates of calcite formed under the same conditions. To estimate the fractionation during ostracod valve calcification, the oxygen and carbon isotope compositions of 15 species living in Lake Geneva were related to their autoecology and the environmental parameters measured during their growth. The results indicate that: (1) Oxygen isotope fractionation is similar for all species of Candoninae with an enrichment in 18O of more than 30/00 relative to equilibrium values for inorganic calcite. Oxygen isotope fractionation for Cytheroidea is less discriminative relative to the heavy oxygen, with enrichments in 18O for these species of 1.7 to 2.30/00. Oxygen isotope fractionations for Cyprididae are in-between those of Candoninae and Cytheroidea. The difference in oxygen isotope fractionation between ostracods and inorganic calcite has been interpreted as resulting from a vital effect. (2) Comparison with previous work suggests that oxygen isotope fractionation may depend on the total and relative ion content of water. (3) Carbon isotope compositions of ostracod valves are generally in equilibrium with DIC. The specimens' δ13C values are mainly controlled by seasonal variations in δ13CDIC of bottom water or variation thereof in sediment pore water. (4) Incomplete valve calcification has an effect on carbon and oxygen isotope compositions of ostracod valves. Preferential incorporation of at the beginning of valve calcification may explain this effect. (5) Results presented here as well as results from synthetic carbonate growth indicate that different growth rates or low pH within the calcification site cannot be the cause of oxygen isotope 'vital effects' in ostracods. Two mechanisms that might enrich the 18O of ostracod valves are deprotonation of that may also contribute to valve calcification, and effects comparable to salt effects with high concentrations of Ca and/or Mg within the calcification site that may also cause a higher temperature dependency of oxygen isotope fractionation.

CPT-11 and concomitant hyperfractionated accelerated radiotherapy induce efficient local control in rectal cancer patients: results from a phase II.

Patients with rectal cancer are at high risk of disease recurrence despite neoadjuvant radiochemotherapy with 5-Fluorouracil (5FU), a regimen that is now widely applied. In order to develop a regimen with increased antitumour activity, we previously established the recommended dose of neoadjuvant CPT-11 (three times weekly 90 mg m(-2)) concomitant to hyperfractionated accelerated radiotherapy (HART) followed by surgery within 1 week. Thirty-three patients (20 men) with a locally advanced adenocarcinoma of the rectum were enrolled in this prospective phase II trial (1 cT2, 29 cT3, 3 cT4 and 21 cN+). Median age was 60 years (range 43-75 years). All patients received all three injections of CPT-11 and all but two patients completed radiotherapy as planned. Surgery with total mesorectal excision (TME) was performed within 1 week (range 2-15 days). The preoperative chemoradiotherapy was overall well tolerated, 24% of the patients experienced grade 3 diarrhoea that was easily manageable. At a median follow-up of 2 years no local recurrence occurred, however, nine patients developed distant metastases. The 2-year disease-free survival was 66% (95% confidence interval 0.48-0.83). Neoadjuvant CPT-11 and HART allow for excellent local control; however, distant relapse remains a concern in this patient population.

Monetary integration and the cost of borrowing

With the beginning of the European Monetary Union (EMU), euro-area sovereign securities¿ adjusted spreads over Germany (corrected from the foreign exchange risk) experienced an increase that caused a lower than expected decline in borrowing costs. The objective of this paper is to study what explains that rising. In particular, if it took place a change in the price assigned by markets to domestic (credit risk and/or market liquidity) or to international risk factors. The empirical evidence supports the idea that a change in the market value of liquidity occurred with the EMU. International and default risk play a smaller role

Mineral inventory of continuously erupting basaltic andesites at Arenal volcano, Costa Rica: implications for interpreting monotonous, crystal-rich, mafic arc stratigraphies

Except for the first 2 years since July 29, 1968, Arenal volcano has continuously erupted compositionally monotonous and phenocryst-rich (similar to35%) basaltic andesites composed of plagioclase (plag), orthopyroxene (opx), clinopyroxene (cpx), spinel olivine. Detailed textural and compositional analyses of phenocrysts, mineral inclusions, and microlites reveal comparable complexities in any given sample and identify mineral components that require a minimum of four crystallization environments. We suggest three distinct crystallization environments crystallized low Mg# (<78) silicate phases from andesitic magma but at different physical conditions, such as variable pressure of crystallization and water conditions. The dominant environment, i.e., the one which accounts for the majority of minerals and overprinted all other assemblages near rims of phenocrysts, cocrystallized clinopyroxene (Mg# similar to71-78), orthopyroxene (Mg# similar to71-78), titanomagnetite and plagioclase (An(60) to An(85)). The second environment cocrystallized clinopyroxene (Mg# 71-78), olivine (<Fo(78)), titanomagnetite, and very high An (similar to90) plagioclase, while the third cocrystallized clinopyroxene (Mg# 71-78) with high (>7) Al/Ti and high (>4 wt.%) Al2O3, titanomagnetite with considerable Al2O3 (10-18 wt.%) and possibly olivine but appears to lack plagioclase. A fourth crystallization environment is characterized by clinopyroxene (e.g., Mg#=similar to78-85; Cr2O3=0.15-0.7 wt.%), Al-, Cr-rich spinel olivine (similar toFo(80)), and in some circumstances high-An (>80) plagioclase. This assemblage seems to record mafic inputs into the Arenal system and crystallization at high to low pressures. Single crystals cannot be completely classified as xenocrysts, antecrysts (cognate crystals), or phenocrysts, because they often contain different parts each representing a different crystallization environment and thus belong to different categories. Bulk compositions are mostly too mafic to have crystallized the bulk of ferromagnesian minerals and thus likely do not represent liquid compositions. On the other hand, they are the cumulative products of multiple mixing events assembling melts and minerals from a variety of sources. The driving force for this multistage mixing evolution to generate erupting basaltic andesites is thought to be the ascent of mafic magma from lower crustal levels to subvolcanic depths which at the same time may also go through compositional modification by fractionation and assimilation of country rocks. Thus, mafic magmas become basaltic andesite through mixing, fractionation and assimilation by the time they arrive at subvolcanic depths. We infer new increments of basaltic andesite are supplied nearly continuously to the subvolcanic reservoir concurrently to the current eruption and that these new increments are blended into the residing, subvolcanic magma. Thus, the compositional monotony is mostly the product of repetitious production of very similar basaltic andesite. Furthermore, we propose that this quasi-constant supply of small increments of magma is the fundamental cause for small-scale, decade-long continuous volcanic activity; that is, the current eruption of Arenal is flux-controlled by inputs of mantle magmas. (C) 2004 Elsevier B.V. All rights reserved.

Melt variability in percolated peridotite: an experimental study applied to reactive migration of tholeiitic basalt in the upper mantle

Melt-rock reaction in the upper mantle is recorded in a variety of ultramafic rocks and is an important process in modifying melt composition on its way from the source region towards the surface. This experimental study evaluates the compositional variability of tholeiitic basalts upon reaction with depleted peridotite at uppermost-mantle conditions. Infiltration-reaction processes are simulated by employing a three-layered set-up: primitive basaltic powder ('melt layer') is overlain by a 'peridotite layer' and a layer of vitreous carbon spheres ('melt trap'). Melt from the melt layer is forced to move through the peridotite layer into the melt trap. Experiments were conducted at 0.65 and 0.8 GPa in the temperature range 1,170-1,290 degrees C. In this P-T range, representing conditions encountered in the transition zone (thermal boundary layer) between the asthenosphere and the lithosphere underneath oceanic spreading centres, the melt is subjected to fractionation, and the peridotite is partially melting (T (s) similar to 1,260 degrees C). The effect of reaction between melt and peridotite on the melt composition was investigated across each experimental charge. Quenched melts in the peridotite layers display larger compositional variations than melt layer glasses. A difference between glasses in the melt and peridotite layer becomes more important at decreasing temperature through a combination of enrichment in incompatible elements in the melt layer and less efficient diffusive equilibration in the melt phase. At 1,290A degrees C, preferential dissolution of pyroxenes enriches the melt in silica and dilutes it in incompatible elements. Moreover, liquids become increasingly enriched in Cr(2)O(3) at higher temperatures due to the dissolution of spinel. Silica contents of liquids decrease at 1,260 degrees C, whereas incompatible elements start to concentrate in the melt due to increasing levels of crystallization. At the lowest temperatures investigated, increasing alkali contents cause silica to increase as a consequence of reactive fractionation. Pervasive percolation of tholeiitic basalt through an upper-mantle thermal boundary layer can thus impose a high-Si 'low-pressure' signature on MORB. This could explain opx + plag enrichment in shallow plagioclase peridotites and prolonged formation of olivine gabbros.

The PEDRO (Pocketable Electronic Devices in Radiation Oncology) project: how clinical practice is changing among young radiation oncologists.

Purpose. To evaluate the impact of mobile devices and apps on the daily clinical activity of young radiation oncologists. Methods. A web-based questionnaire was sent to 382 young (≤40 years) members of the Italian Association of Radiation Oncology (AIRO). The 14 items investigated the diffusion of mobile devices (smartphones and/or tablets), their impact on daily clinical activity, and possible differences perceived by the participants over time. Results. A total of 158 questionnaires were available for statistical evaluation (response rate 41%). Up to 75% of respondents declared they used an electronic device during their clinical activity. Conversely, 82% considered the impact of smartphones/tables on daily practice low to moderate. Daily device use increased significantly from 2009 to 2012, with high daily use rates rising from 5% to 39.9%. Fulfillment of professional needs was declared by less than 42% of respondents and compliance with app indications by 32%. Almost all physicians desired in 2012 a comprehensive website concerning a variety of apps covering radiation oncologists' needs. Conclusions. Mobile devices are widely used by young Italian radiation oncologists in their daily clinical practice, while the indications so obtained are not always followed. Nevertheless, it would be important to verify the consistency of information found within apps, in order to avoid potential errors that might be detrimental to patients.

Elemental and isotopic zoning in natural alpine quartz

THESIS ABSTRACT : Stable isotope geochemistry is used to help resolve a large number of geological questions. In order to do this, it is essential to understand the different mechanisms that govern isotopic fractionation processes between different phases and to identify the conditions required to reach equilibrium fractionation. However, at low temperatures, these processes are poorly constrained and many factors can induce differential partitioning of the isotopes between sectors of a mineral species and the fluid during mineral growth. This can result in so-called 'sector zoning' of a mineral species. The aim of this thesis is to evaluate the occurrence of sector zoning of the oxygen isotopes and trace elements in natural α-quartz crystals and to identify the reasons for such zoning. The implications for the fluid-mineral interactions are studied in the context of the Alpine metamorphism. The approach chosen has focused on examining the crystal structure, cathodoluminescence appearance (CL), and on relating elemental (e.g. Li, Na, Al, P, K, Ca, Ge, Ti, Fe) to stable oxygen isotope compositions between and along different growth sectors. Low temperature quartz samples were selected from Alpine veins in different localities, where growth conditions have already been well constrained. The mineralogy as well as the isotopic compositions of the host rocks were also investigated, in order to interpret the variations obtained between the different growth stages in the framework of fluid-rock interaction during Alpine metamorphism. Depending on the growth conditions, most of the studied quartz is strongly zoned in CL, and it reveals corresponding zonations in the trace element content (e.g. growth zoning). Aluminium, substituting for Si in the lattice, was found in concentrations up to 1000's ppma, and its distribution is strongly related to Li and H and to a lesser extent, to Ge. Elemental sector zoning is evident from the distribution of these three elements since they exhibit differences in their respective concentrations between faces for distinct growth zones, with prismatic faces having the lowest Al contents. Quartz from veins in magmatic rocks, for example, tend to have lower Al concentrations and similar concentrations of Li and Ti suggesting also a contribution of these elements from the host rock. The relationship between Al and Li is still correlated. Only Alpine crystals grown at higher temperatures (~400°C) without any CL zoning feature are free of these impurities and do not show such zoning characteristics. Differences in the δ18O values were measured between different faces principally in the AIenriched growth zones or stages. These results were confirmed by the means of two different methods (in situ/non in situ). However, it was determined that the Al concentrations do not affect significantly oxygen isotope fractionations at 300°C. The results altogether suggest that the presence of sector zoning in quartz crystals is real, but not universal, and henceforth should be taken into consideration for any use of these systems. The occurrence of disequilibrium partitioning has been enhanced and is possibly related to kinetic processes as well as structural effects that do not affect similarly trace element incorporation and isotopic fractionation. In situ measurements also revealed fine scale δ18O zonations along growth paths that are useful to constrain fluid-rock interactions during Alpine metamorphism. Variations in the δ18O values present along growth vectors indicate changes in the fluid composition and origin. Association with oxygen isotope composition of the host rock allows for the deduction of interactions between rocks, veins and consequently fluids, as well as fluid regimes. RESUME DE LA THESE : A basses températures, (i.e. <400°C) les différents mécanismes qui régissent le fractionnement isotopique ainsi que les conditions nécessaires pour établir un état d'équilibre sont peu connus et nombre de paramètres peuvent entraîner un partitionnement chimique différentiel entre différents secteurs d'un minéral et le fluide en contact. Ainsi, ce travail de thèse a pour but d'évaluer la possible présence de zonages sectoriels en isotopes de l'oxygène mais aussi en éléments traces dans des cristaux naturels de quartz-α de basses températures, ainsi que les raisons d'un tel phénomène et enfin ses implications sur les interactions fluide-roche, principalement dans le cadre du métamorphisme Alpin. La structure et l'apparence en cathodoluminescence (CL) des échantillons ont été caractérisées avant de retracer en détail les compositions en élément traces (Li, Na, Al, P, K, Ca, Ge, Ti, Fe) et en isotopes de l'oxygène, le long et entre différents secteurs. Les échantillons de quartz sélectionnés proviennent majoritairement de veines Alpine de différentes localités, où les conditions de croissance ont été déjà bien caractérisées. Les compositions minéralogiques et isotopiques de la roche encaissante ont aussi été examinées, pour contraindre les variations obtenues dans un contexte Alpin. Selon leurs conditions de croissance, la plupart des cristaux étudiés sont fortement zonés, ce qui est souligné par un zonage des concentrations en éléments traces (e.g. zonage de croissance). L'Aluminium, qui peut se substituer à la Silice dans le réseau cristallin, a été retrouvé jusqu'en très grandes concentrations dans certaines zones (plusieurs milliers de ppma). De plus, la distribution en Al est fortement liée à celles de Li et H, ainsi que dans une moindre mesure à Ge. La présence de zonage sectoriel est évidente au niveau de ces éléments qui montrent de larges différences de concentrations entre différentes faces pour une même zone de croissance, avec les concentrations les plus basses retrouvées dans les faces prismatiques. Les quartz de veines situées dans des roches magmatiques par exemple possèdent des concentrations en Li et Ti de même ordre de grandeur, confirmant le rôle de la composition de la roche encaissante. La relation Li/Al est toujours fortement présente, mais ce rapport est fonction de la face mesurée. Seuls les cristaux Alpins de plus hautes températures (400°C) ne possédant pas de zones en CL ne présentent aucune de ces caractéristiques. Des différences dans les valeurs de δ18O de zones identiques enrichies en Al ont clairement été mesurées entre les différentes faces r, z, et m, mais aussi au sein d'une même seule zone, indiquant que le fractionnement a probablement eu lieu en déséquilibre. Il a été déterminé que la présence d'Al dans ces teneurs n'avait qu'un faible effet sur le fractionnement isotopique de l'oxygène. L'utilisation de deux méthodes différentes a permis d'obtenir des résultats in situ et non in situ concordants. La comparaison des résultats obtenus permet de démontrer que le zonage sectoriel est bien présent dans certains cristaux de quartz, et dépend des conditions de formation. La présence d'un partitionnement différentiel des éléments traces peut être due à des effets cinétiques aussi bien que structuraux, alors que le zonage sectoriel des isotopes de l'oxygène aurait d'autres origines. Il est alors évident que la possibilité de zonage sectoriel doit être désormais pris en considération avant toute interprétations de données isotopiques de cristaux zonés. Les mesures in situ ont de plus permis de distinguer de fines variations des valeurs δ18O au cours de la croissance, qui peuvent aider à retracer la circulations des fluides dans les Alpes durant cette période. En association avec les compositions des roches encaissantes, ii est possible de déduire les interactions entre roches, veines, et par conséquent fluides, au cours de différentes étapes. RESUME GRAND PUBLIC : La géochimie des isotopes stables a pris beaucoup d'importance depuis ces dernières années pour aider à résoudre nombre de questions géologiques, en se basant sur les caractéristiques du fractionnement isotopiques pour différents systèmes. Il est donc nécessaire d'avoir une connaissance approfondie des mécanismes qui s'appliquent au fractionnement isotopique entre les minéraux et les fluides à partir desquels ils se forment. Ces mécanismes ont été bien approchés par différents types de calibrations pour des systèmes à hautes températures, cependant cela n'est pas aussi évident pour les systèmes à des températures inférieures à 400-500°C. Ce travail de thèse a pour but d'aider à la description et la compréhension des phénomènes qui peuvent affecter le fractionnement isotopique à basses températures, ainsi que leurs implications, à partir de l'étude de cristaux de quartz. Le choix des échantillons s'est porté sur des cristaux naturels formés à des températures inférieures ou égales à 400°C, provenant majoritairement de fissures hydrothermales Alpines dont les conditions de formation ont déjà été déterminées. L'étude des cristaux Alpin permet de plus de replacer les résultats obtenus dans le contexte du métamorphisme Alpin au cours du Miocène (21-13 Ma). Après examen de la structure et de la morphologie des cristaux, et leur caractérisation par cathodoluminescence (CL), des analyses chimiques détaillées sur les éléments en traces pouvant entrer dans le réseau cristallin du quartz comme impuretés (i.e. Li, Na, Al, P, K, Ca, Ge, Ti), et des isotopes stables de l'oxygène, ont été menées. En fonction des conditions de croissance, la plupart des cristaux présentent des zonations, qui peuvent être facilement reliées à la distribution des éléments traces analysés par microsonde électronique, sonde ionique (SIMS) et LA-ICPMS. De fortes concentrations d'Aluminium (plusieurs milliers de parties par million atomique) ont pu être observées dans les zones les plus externes des cristaux. De plus, les concentrations en Al et en Li sont toujours corrélées; la présence d'Hydrogène déduite à partir d'analyses par FTIR suit cette même tendance. Les différentes faces des cristaux présentent des concentrations distinctes d'Al, Li et H pour des mêmes zones de croissance, avec par exemple les concentrations les plus faibles dans les zones des faces prismatiques. Cela implique la présence d'un zonage sectoriel, qui a déjà été observé principalement dans des carbonates mais jamais décrit auparavant pour des quartz. Seuls les cristaux alpins homogènes en CL dont la croissance s'est faite à plus haute température (400°C) ne présentent aucune de ces caractéristiques. Par analogie avec le zonage sectoriel en Al, élément qui se substitue au Si dans le réseau cristallin du quartz, il est possible de penser qu'un zonage sectoriel pourrait aussi s'appliquer aux isotopes de l'oxygène. Des précédentes études avaient en effet émis cette hypothèse. Nos résultats ont été obtenus à partir d'analyses à la fois in- situ par SIMS, et par extraction assistée par laser-CO2 sur des parties de quartz soigneusement séparées, et sont en accord entre les deux méthodes. Un zonage sectoriel est en effet bien présent pour les cristaux alpins, mais principalement au niveau des zones très riches en Aluminium. Cependant, il a été déterminé que la présence d'Al dans ces teneurs avait un effet plus que minimal sur le fractionnement isotopique de l'oxygène. Des différences importantes ont été observées entre les faces r & z mais aussi au sein d'une même et seule zone, indiquant que le fractionnement a pu avoir lieu en déséquilibre, ce qui est aussi visible au niveau des valeurs totalement opposées entre faces pour la dernière phase de croissance de certains cristaux. Ainsi l'association de ces résultats laisse suggérer que la présence d'un zonage sectoriel peut être liée à différents paramètres tels que le taux de croissance ou la structure de surface du cristal, mais qui n'affectent pas de la même façon l'incorporation des éléments traces et le fractionnement isotopique. La possibilité d'un zonage sectoriel est importante à prendre en compte lors de toute interprétation de données isotopiques. Les analyses des isotopes de l'oxygène effectuées par SIMS ont aussi permis de distinguer des variations importantes à petite échelle au cours de la croissance. Des mesures faites par laser CO2 sur certaines roches encaissantes, ont permis distinguer plusieurs étapes dans la croissance des minéraux et de déduire le rôle de l'encaissant et le type de fluide. En association avec de précédentes études, il a été ainsi possible de mieux contraindre la formation de ces cristaux dans le contexte alpin et la circulation de fluide au cours du métamorphisme alpin durant le Miocène.

Stable isotope geochemistry and phase-equilibria of coesite-bearing whiteschists, Dora Maira massif, Western Alps

Peak metamorphic temperatures for the coesite-pyrope-bearing whiteschists from the Dora Maira Massif, western Alps were determined with oxygen isotope thermometry. The deltaO-18(SMOW) values of the quartz (after coesite) (delta O-18 = 8.1 to 8.6 parts per thousand, n = 6), phengite (6.2 to 6.4 parts per thousand, n = 3), kyanite (6.1 parts per thousand, n = 2), garnet (5.5 to 5.8 parts per thousand, n = 9), ellenbergerite (6.3 parts per thousand, n = 1) and rutile (3.3. to 3.6 parts per thousand, n = 3) reflect isotopic equilibrium. Temperature estimates based on quartz-garnet-rutile fractionation are 700-750-degrees-C. Minimum pressures are 31-32 kb based on the pressure-sensitive reaction pyrope + coesite = kyanite + enstatite. In order to stabilize pyrope and coesite by the temperature-sensitive dehydration reaction talc + kyanite = pyrope + coesite + H2O, the a(H2O) must be reduced to 0.4-0.75 at 700 750-degrees-C. The reduced a(H2O) cannot be due to dilution by CO2, as pyrope is not stable at X (CO2) > 0.02 (T = 750-degrees-C; P = 30 kb). In the absence of a more exotic fluid diluent (e.g. CH4 or N2), a melt phase is required. Granite solidus temperatures are approximately 680-degrees-C/30 kb at a(H2O) = 1.0 and are calculated to be approximately 70-degrees-C higher at a(H2O) = 0.7, consistent with this hypothesis. Kyanite-jadeite-quartz bands may represent a relict melt phase. Peak P-T-f(H2O) estimates for the whiteschist are 34 +/- 2 kb, 700-750-degrees-C and 0.4-0.75. The oxygen isotope fractionation between quartz (deltaO-18 = 11.6%.) and garnet (deltaO-18 = 8.7 parts per thousand) in the surrounding orthognesiss is identical to that in the coesite-bearing unit, suggesting that the two units shared a common, final metamorphic history. Hydrogen isotope measurements were made on primary talc and phengite (deltaD(smow) = -27 to -32 parts per thousand), on secondary talc and chlorite after pyrope (deltaD = - 39 to - 44 parts per thousand) and on the surrounding biotite (deltaD = -64 parts per thousand) and phengite (deltaD = -44 parts per thousand) gneiss. All phases appear to be in near-equilibrium. The very high deltaD values for the primary hydrous phases is consistent with an initial oceanic-derived/connate fluid source. The fluid source for the retrograde talc + chlorite after pyrope may be fluids evolved locally during retrograde melt crystallization. The similar deltaD, but dissimilar deltaO-18 values of the coesite-bearing whiteschists and hosting orthogneiss suggest that the two were in hydrogen isotope equilibrium, but not oxygen isotope equilibrium. The unusual hydrogen and oxygen isotope compositions of the coesite-bearing unit can be explained as the result of metasomatism from slab-derived fluids at depth.

The Gronnedal-Ika carbonatite-syenite complex, South Greenland: Carbonatite formation by liquid immiscibility

The Gronnedal-Ika complex is dominated by layered nepheline syenites which were intruded by a xenolithic syenite and a central plug of calcite to calcite-siderite carbonatite. Aegirine-augite, alkali feldspar and nepheline are the major mineral phases in the syenites, along with rare calcite. Temperatures of 680-910degreesC and silica activities of 0.28-0.43 were determined for the crystallization of the syenites on the basis of mineral equilibria. Oxygen fugacities, estimated using titanomagnetite compositions, were between 2 and 5 log units above the fayalite-magnetite-quartz buffer during the magmatic stage. Chondrite-normalized REE patterns of magmatic calcite in both carbonatites and syenites are characterized by REE enrichment (La-CN-Yb-CN = 10-70). Calcite from the carbonatites has higher Ba (similar to5490 ppm) and lower HREE concentrations than calcite from the syenites (54-106 ppm Ba). This is consistent with the behavior of these elements during separation of immiscible silicate-carbonate liquid pairs. epsilon(Nd)(T = 1.30 Ga) values of clinopyroxenes from the syenites vary between +1.8 and +2.8, and epsilon(Nd)(T) values of whole-rock carbonatites range from +2.4 to +2.8. Calcite from the carbonatites has delta(18)O values of 7.8 to 8.6parts per thousand and delta(13)C values of -3.9 to -4.6parts per thousand. delta(18)O values of clinopyroxene separates from the nepheline syenites range between 4.2 and 4.9parts per thousand. The average oxygen isotopic composition of the nepheline syenitic melt was calculated based on known rock-water and mineral-water isotope fractionation to be 5.7 +/- 0.4parts per thousand. Nd and C-O isotope compositions are typical for mantle-derived rocks and do not indicate significant crustal assimilation for either syenite or carbonatite magmas. The difference in delta(18)O between calculated syenitic melts and carbonatites, and the overlap in epsilon(Nd) values between carbonatites and syenites, are consistent with derivation of the carbonatites from the syenites via liquid immiscibility.

Combined radioimmunotherapy and radiotherapy of liver metastases from colorectal cancer: a feasibility study.

BACKGROUND: A combination of radioimmunotherapy (RIT) and radiotherapy (RT) should allow one to increase the dose of radiation targeting a particular tumour without the concomitant increase of toxic side effects. This might be obtained if the dose limiting side effect of each individual radiation therapy concerned different organs. METHODS: Six patients with limited liver metastatic disease from colorectal cancer were treated with 6.9 GBq (range 4.7 to 8.4 GBq) 131I-labelled anti-CEA MAb F(ab')2 fragments combined with 20 Gy RT to the liver. Both treatments were given in close association, according to timing schedules evaluated in animals that gave the best results. RESULTS: Reversible bone marrow and liver toxicity was observed in 6 and 5 patients, respectively. Three patients who first received 20 Gy RT to the liver, showed a significant platelet drop upon completion of RT. Repeat computerized tomography (CT) after 2 months showed a minor response in 1 patient and stable disease in 3 patients. CONCLUSION: The study shows potential ways of combining RIT and RT, suggesting that this combination is feasible for the treatment of liver metastases.

Mechanisms of HCF protein proteolytic maturation

Abstract : Post-translational modifications such as proteolytic processing, phosphorylation, and glycosylation, add extra layers of complexity to proteomes and allow a finely tuned regulation of the activity of many proteins. The evolutionarily conserved cell-cycle and transcriptional regulator HCP-] is regulated by proteolytic maturation via which a stable heterodirneric complex of two cleaved subunits is formed from a single precursor protein. The human HCF-1 precursor is cleaved at six nearly identical 26 amino acid sequence repeats, called HCF-1pro repeats, which represent uncommon protease recognition sites dedicated to human HCF-1 proteolysis. This proteolytic maturation process is conserved in vertebrate HCF-1 homologues and is essential for the functions of the human protein in cell-cycle regulation; the mechanisms that execute and control HCF-1 proteolysis, however, remain poorly understood. In this dissertation I investigate the mechanisms of proteolytic maturation of HCF-1 proteins in different species. I show that the Drosophila homolog of human HCF-1, called dHCP, is proteolytically cleaved via a different mechanism than human HCF-1. dHCP is processed by the same protease, called Taspase], which cleaves one of the key developmental regulators in flies, the Trithorax protein. Maturation of HCP proteins via Taspase] cleavage is probably not particular to dHCP as many invertebrate HCP proteins, particularly insects and flatworms, possess Taspase] recognition sites. In contrast, the vertebrate HCF-1 proteins lack Taspase] recognition sites and the HCF-1pro repeats are not Taspase1 substrates, suggesting that multiple mechanisms for HCF-1 proteolytic maturation have appeared during evolution. I also show that the proteolytic activity responsible for the cleavage of the HCP- 1pro repeats is very difficult to characterize, being resistant to most protease inhibitors and very sensitive to biochemical fractionation. Moreover, the HCF-1pro repeats represent complex protease recognition sites and I demonstrate that, in addition to be the HCF-1 cleavage sites, these repeated sequences, also recruit the OG1cNAc transferase OGT. The OGT protein and the OG1cNAc modification of HCF-1 are both important for HCF-1pro repeat proteolysis. Interestingly, a human recombinant OGT purified from insect cells is able to induce cleavage of a HCF-1pro-repeat precursor in vitro, indicating that OGT either (i) induces HCF-1 autoproteolysis,(ii) is the HCF-1pro- repeat proteolytic activity itself, or (iii) physically associates with a proteolytic activity that is conserved in insect cells. In any case, OGT plays an important role in HCF-1 proteolytic maturation and perhaps a broader role in HCF-1 biological function. Résumé : Les modifications post-traductionelles pomme le clivage protéolytique, la phosphorylation, et la glycosylation, augmentent significativement la complexité des protéomes et permettent une régulation fine de l'activité de beaucoup de protéines. La protéine HCF-1, qui est un régulateur du cycle cellulaire et de la transcription, est elle- même régulée par clivage protéolytique. La protéine HCF-1 est en effet coupée en deux sous-unités qui s'associent l'une a l'autre pour former la protéine mature. Le précurseur de la protéine HCF-1 humaine est clivé à six sites correspondant à six séquences répétées nommées les HCF-1pro repeats, chacune composée de 26 acide aminés. Les HCF-1pro- repeats ne ressemblent ai aucune séquence de clivage protéolytique connue et sont présentes seulement dans les protéines HCF-1 chez les vertébrés. Bien que la maturation protéolytique d'HCF-1 soit essentielle pour les activités de cette protéine pendant le cycle cellulaire, les mécanismes qui la contrôlent restent inconnus. Au cours de mon travail de thèse, j'ai analysé les mécanismes de clivage protéolytique des protéines HCF dans différentes espèces. J'ai montré que la protéine de Drosophile homologue d'HCF-1 humaine nommée dHCF est clivée par une protéase nommée Taspase1. Ainsi, dHCF est clivé par la même protéase que celle qui induit la maturation protéolytique d'un des principaux facteurs du développement chez la mouche, la protéine Trithorax. La maturation de dHCF via le clivage par la Taspase1 n'est pas spécifique à la mouche, mais est probablement étendu à plusieurs protéines HCF chez les invertébrés, surtout dans les familles des insectes et des plathehninthes, car ces protéines HCF présentent des sites de reconnaissance pour la Taspasel. Par contre, les protéines HCF-1 chez les vertébrés n'ont pas de sites de reconnaissance pour la Taspasel et cela suggère que différents mécanismes de maturation des protéines HCF- ls ont apparu au cours de l'évolution. J'ai montré aussi que les HCF-1pro-repeats sont clivés par une activité protéolytique très difficile a identifier, car elle est résistante à la plupart des inhibiteurs de protéases, mais elle est très sensible au fractionnement biochimique. En plus, les HCF-1pro-repeats sont un site de protéolyse complexe qui ne sert pas seulement au clivage des protéines HCF- chez les vertébrés mais aussi à recruter l'enzyme responsable de la O- GlcNAcylation nommée OGT. La protéine OGT et la O-GlcNAcylatio d'HCF-1 sont toutes les deux importantes pour le clivage protéolytique des HCF1pro-repeats. Curieusement, la protéine OGT humaine produite dans des cellules d'insectes est capable de cliver les HCF-1pro repeats in vitro et cela suggère que OGT soit (i) induit le clivage autocatalytique cl'HCF-1, soit (ii) est elle-même l'activité protéolytique qui clive HCF4, soit (iii) est associée à une activité protéolytique conservée dans les cellules d'insectes qui a été co-purifiée avec OGT. En conclusion, OGT joue un rôle important dans la maturation protéolytique d'HCF-1 et peut-être aussi un rôle plus large dans les fonctions biologiques de la protéine HCF-1.

Fast quantification of ten psychotropic drugs and metabolites in human plasma by ultra-high performance liquid chromatography tandem mass spectrometry for therapeutic drug monitoring.

A sensitive and selective ultra-high performance liquid chromatography (UHPLC) tandem mass spectrometry (MS/MS) method was developed for the fast quantification of ten psychotropic drugs and metabolites in human plasma for the needs of our laboratory (amisulpride, asenapine, desmethyl-mirtazapine, iloperidone, mirtazapine, norquetiapine, olanzapine, paliperidone, quetiapine and risperidone). Stable isotope-labeled internal standards were used for all analytes, to compensate for the global method variability, including extraction and ionization variations. Sample preparation was performed by generic protein precipitation with acetonitrile. Chromatographic separation was achieved in less than 3.0min on an Acquity UPLC BEH Shield RP18 column (2.1mm×50mm; 1.7μm), using a gradient elution of 10mM ammonium formate buffer pH 3.0 and acetonitrile at a flow rate of 0.4ml/min. The compounds were quantified on a tandem quadrupole mass spectrometer operating in positive electrospray ionization mode, using multiple reaction monitoring. The method was fully validated according to the latest recommendations of international guidelines. Eight point calibration curves were used to cover a large concentration range 0.5-200ng/ml for asenapine, desmethyl-mirtazapine, iloperidone, mirtazapine, olanzapine, paliperidone and risperidone, and 1-1500ng/ml for amisulpride, norquetiapine and quetiapine. Good quantitative performances were achieved in terms of trueness (93.1-111.2%), repeatability (1.3-8.6%) and intermediate precision (1.8-11.5%). Internal standard-normalized matrix effects ranged between 95 and 105%, with a variability never exceeding 6%. The accuracy profiles (total error) were included in the acceptance limits of ±30% for biological samples. This method is therefore suitable for both therapeutic drug monitoring and pharmacokinetic studies.

The Iowa State Capitol Grounds 1913 Extension and Reconstruction Project, October 2012

The Capitol grounds have been evolving through planned and unplanned actions for more than 150 years. The 1857 Constitutio established Des Moines as the capital. The commissioners appointed to choose a site decided on land donated by Wilson Alexander Scott and Harrison Lyon. Located on the east side of the Des Moines River, on a gently rising hill, the site for the Iowa State Capitol began with fewer than 10 acres. The Old Brick Capitol was built in the center of that 10-acre plot, and the area to the north was used as a public park until work began on the present day Capitol. In 1884, the two-year process of moving from the Old Brick Capitol to the new Capitol began. The state commissioned John Weidenman to design the first formal decoration of the grounds. Weidenman’s plans for the west approach to the Capitol included planting statues, and walkways. The State held some additional land but not necessarily land adjacent to the Capitol. In 1909, legislation was passed, and in 1913, the Thirty-Fifth General Assembly enacted controversial legislation to acquire additional land. A commission was formed to locate a purposed monument honoring the long-serving U.S. Senator William B. Allison. E.L. Masqueray was hired as the architect expert focusing on the selection of a proper site for the proposed Allison Memorial. Masqueray’s plan detailed the placement of buildings and potential monuments. Growth of the Capitol Complex, as known today, began.