935 resultados para Récepteur "scavenger" de classe B de type II (SR-BII)
Resumo:
地锦（Parthenocissus tricuspidata）为葡萄科（Vitaceae）地锦属（Parthenocissus）多年生大型落叶木质藤本植物，集绿化、环境保护、药用价值为一体，开发利用前景非常广阔。为了进一步有效地利用及增加它的适应性，本论文对地锦的遗传转化及其抑菌活性进行了初步研究。 利用根癌农杆菌（Agrobacterium tumefaciens）介导对地锦进行遗传转化。所转外源目的基因为干旱应答因子结合蛋白DREB基因，克隆自拟南芥，受干旱应答基因启动子rd29Bp驱动。将此基因与pCAMBIA2301重组构建得到植物表达载体p2326。p2326携报告基因b-葡萄糖苷酸酶基因（gus）和选择基因新霉素磷酸转移酶基因（npt II）。然后将p2326导入根癌农杆菌EHA105，对地锦愈伤组织及外植体茎段进行转化。经3-4轮卡那霉素选择培养后，PCR及GUS组织染色验证，表明成功获得了转基因愈伤组织。 对地锦愈伤组织进行耐盐及脯氨酸含量测定。结果表明，转基因愈伤组织与非转基因愈伤组织相比，对高盐的耐受力有较大提高。在250 mM NaC1的继代培养基中，携DREB基因的愈伤组织能够存活20 d以上，而对照在10 d后大多数褐化死亡。高盐胁迫时转基因材料脯氨酸含量高于对照，并能够维持较长时间。 研究还发现，来自室外自然生长的地锦茎、叶，对根癌农杆菌有极强的抑制作用。 因此，对地锦的抑菌作用进行初步研究。 对一年中不同时期（分别采于4月、8月、12月）的地锦茎、叶进行抑菌活性初步研究。结果表明，12月份地锦叶片对所选细菌抑制作用最强。然后对其进行分溶剂萃取。分别用极性递增的有机溶剂依次提取地锦中的有效成分、逐级分离、浓缩干燥，得到石油醚部、乙酸乙酯部、正丁醇部和水部等不同极性溶剂萃取物。选择革兰氏阳性菌和阴性菌共5种对得到的各部分粗提物分别做抑菌实验，表明正丁醇部的抑菌活性最强，水部提取物有一定抑制作用，而石油醚部、乙酸乙酯部没有表现出明显抑菌作用。 地锦正丁醇提取物对大肠杆菌、枯草杆菌、短小芽孢杆菌、农杆菌及酵母菌的最低抑制浓度（MIC）分别为0.25，0.3，0.25，0.3，1g/mL。其抑菌活性随着浓度增加而增强，而且抑菌活性具有较好的热稳定性。 研究发现地锦所产生的抑菌物质不仅对无耐药性的细菌具有抑制作用，而且还对某些耐药性细菌具有抑制作用。目前，细菌对抗生素的耐药性已成为全球关注的问题，寻找新型抗生素已迫在眉捷，地锦抑菌物质的研究为新抗菌药物的研制开发提供了新思路。 上述研究结果，为地锦的遗传改良及开发利用打下基础。
Resumo:
A sandwich structure consisting of Ag nanoparticles (NPs), p-aminothiophenol (p-ATP) self-assembled monolayers (SAMs), and Ag NPs was fabricated on glass and characterized by surface enhanced Raman scattering (SERS). The SERS spectrum of a p-ATP SAM in such sandwich structure shows that the electromagnetic enhancement is greater than that on Ag NPs assembled on glass. The obtained enhancement factors (EF) on solely one sandwich structure were as large as 6.0 +/- 0.62x10(4) and 1.2 +/- 0.62x10(7) for the 7a and 3b(b(2)) vibration modes, respectively. The large enhancement effect of p-ATP SAMs is likely a result of plasmon coupling between the two layers of Ag NP (localized surface plasmon) resonance, creating a large localized electromagnetic field at their interface, where p-ATP resides. Moreover, the fact that large EF values (similar to 1.9 +/- 0.7x10(4) and 9.4 +/- 0.7x10(6) for the 7a- and b(2)-type vibration modes, respectively) were also obtained on a single sandwich structure of Au NPs/p-ATP SAMs/Ag NPs in the visible demonstrates that the electromagnetic coupling does not exist only between Ag NPs but also between Au and Ag NPs.
Resumo:
Surface-enhanced Raman scattering (SERS) activity of silver-gold bimetallic nanostructures (a mean diameter of similar to 100 nm) with hollow interiors was checked using p-aminothiophenol (p-ATP) as a probe molecule at both visible light (514.5 nm) and near-infrared (1064 nm) excitation. Evident Raman peaks of p-ATP were clearly observed, indicating the enhancement Raman scattering activity of the hollow nanostructure to p-ATP. The enhancement factors (EF) at the hollow nanostructures were obtained to be as large as (0.8 +/- 0.3)x10(6) and (2.7 +/- 0.5)x10(8) for 7a and 19b (b(2)) vibration mode, respectively, which was 30-40 times larger than that at silver nanoparticles with solid interiors at 514.5 nm excitation. EF values were also obtained at 1064 nm excitation for 7a and b(2)-type vibration mode, which were estimated to be as large as (1.0 +/- 0.3)x10(6) and (0.9 +/- 0.2)x10(7), respectively. The additional EF values by a factor of similar to 10 for b(2)-type band were assumed to be due to the chemical effect. Large electromagnetic EF values were presumed to derive from a strong localized plasmas electromagnetic field existed at the hollow nanostructures.
Resumo:
Three new lanthanide (Ln)-alkylaluminium (Al) bimetallic complexes with the formula [(mu-CF3CO2)(2)Ln(mu-CF3CHO2)AIR(2) . 2THF](2) (Ln = Nd, Y, R=i-C4H9 (i-Bu); Ln=Eu, R=C2H5(Et); THF=tetrahydrofuran) were synthesized by the reaction of Ln(CF,CO,), (Ln=Nd, Y) with HAI (i-Bu)(2) and of Eu(CF3CO2)(3) with AlEt(3), respectively. Their crystal structures were determined by X-ray diffraction at 233 K. [(mu-CF3CO2)(2)Nd (mu-CF3CHO2)Al(i-Bu)(2) . 2THF](2) (Nd-Al) and [(mu-CF3CO2)(2)Y(mu-CF3CHO2)Al(i-Bu)(2) . 2THF](2) (Y-Al) are isomorphous and crystallize in space group
Genome-wide analysis of restriction-modification system in unicellular and filamentous cyanobacteria
Resumo:
Cyanobacteria are an ancient group of gram-negative bacteria with strong genome size variation ranging from 1.6 to 9.1 Mb. Here, we first retrieved all the putative restriction-modification (RM) genes in the draft genome of Spirulina and then performed a range of comparative and bioinformatic analyses on RM genes from unicellular and filamentous cyanobacterial genomes. We have identified 6 gene clusters containing putative Type I RMs and 11 putative Type II RMs or the solitary methyltransferases (MTases). RT-PCR analysis reveals that 6 of 18 MTases are not expressed in Spirulina, whereas one hsdM gene, with a mutated cognate hsdS, was detected to be expressed. Our results indicate that the number of RM genes in filamentous cyanobacteria is significantly higher than in unicellular species, and this expansion of RM systems in filamentous cyanobacteria may be related to their wide range of ecological tolerance. Furthermore, a coevolutionary pattern is found between hsdM and hsdR, with a large number of site pairs positively or negatively correlated, indicating the functional importance of these pairing interactions between their tertiary structures. No evidence for positive selection is found for the majority of RMs, e. g., hsdM, hsdS, hsdR, and Type II restriction endonuclease gene families, while a group of MTases exhibit a remarkable signature of adaptive evolution. Sites and genes identified here to have been under positive selection would provide targets for further research on their structural and functional evaluations.
Genome-wide analysis of restriction-modification system in unicellular and filamentous cyanobacteria
Resumo:
Cyanobacteria are an ancient group of gram-negative bacteria with strong genome size variation ranging from 1.6 to 9.1 Mb. Here, we first retrieved all the putative restriction-modification (RM) genes in the draft genome of Spirulina and then performed a range of comparative and bioinformatic analyses on RM genes from unicellular and filamentous cyanobacterial genomes. We have identified 6 gene clusters containing putative Type I RMs and 11 putative Type II RMs or the solitary methyltransferases (MTases). RT-PCR analysis reveals that 6 of 18 MTases are not expressed in Spirulina, whereas one hsdM gene, with a mutated cognate hsdS, was detected to be expressed. Our results indicate that the number of RM genes in filamentous cyanobacteria is significantly higher than in unicellular species, and this expansion of RM systems in filamentous cyanobacteria may be related to their wide range of ecological tolerance. Furthermore, a coevolutionary pattern is found between hsdM and hsdR, with a large number of site pairs positively or negatively correlated, indicating the functional importance of these pairing interactions between their tertiary structures. No evidence for positive selection is found for the majority of RMs, e. g., hsdM, hsdS, hsdR, and Type II restriction endonuclease gene families, while a group of MTases exhibit a remarkable signature of adaptive evolution. Sites and genes identified here to have been under positive selection would provide targets for further research on their structural and functional evaluations.
Resumo:
The family of fibrinogen-related proteins (FREPs) is a group of proteins with fibrinogen-like domains. Many members of this family play important roles as pattern recognition receptors in innate immune responses. The cDNA of bay scallop Argopecten irradians FREP (designated as AiFREP) was cloned by rapid amplification of cDNA ends (RACE) method based on the expressed sequence tag (EST). The full-length cDNA of AiFREP was of 990 bp. The open reading frame encoded a polypeptide of 251 amino acids, including a signal sequence and a 213 amino acids fibrinogen-like domain. The fibrinogen-like domain of AiFREP was highly similar to those of mammalian ficolins and other FREPs. The temporal expression of AiFREP mRNA in hemolymph was examined by fluorescent quantitative real-time PCR. The mRNA level of scallops challenged by Listonella anguillarum was significantly up-regulated, peaked to 9.39-fold at 9 h after stimulation, then dropped back to 4.37-fold at 12 h, while there was no significant change in the Micrococcus luteus challenged group in all periods of treatment. The function of AiFREP was investigated by recombination and expression of the cDNA fragment encoding its mature peptide in Escherichia coli Rosetta gami (DE3). The recombinant AiFREP (rAiFREP) agglutinated chicken erythrocytes and human A, B, O-type erythrocytes. The agglutinating activities were calcium-dependent and could be inhibited by acetyl group-containing carbohydrates. rAiFREP also agglutinated Gram-negative bacteria E. coli JM109, L anguillarum and Gram-positive bacteria M. luteus in the presence of calcium ions. These results collectively suggested that AiFREP functions as a pattern recognition receptor in the immune response of bay scallop and contributed to nonself recognition in invertebrates, which would also provide clues for elucidating the evolution of the lectin pathway of the complement system. (C) 2008 Elsevier Ltd. All rights reserved.
Resumo:
XRD, TEM, SEM and EDS are employed to analyze smectites in the clay fraction of the surface sediments from the East Pacific. It is shown from the XRD results that the clay fraction consists of about 20% smectites. Three types of smectites are identified, Fe-rich (Type I), Fe, Mg-rich (Type II) and Na,Ca smectite (Type III), and most of them are not well-crystallized. Type I is widely distributed in sediments, showing honeycomblike in the SEM, and aggregated or dispersive hairlike, or cloudy assemblage with a bit curl near its edge in the TEM. This type is considered to be typomorphic type of authigenic smectite in the East Pacific. Type II is similar to Type I in micromorphology in the TEM, showing a transition micronite, while Type III is tabletlike in the TEM with an unclear edge. Type I may be altered from volcanics and some of them even precipitated from the low subthermal water. Type II could also be formed in the ocean floor, while Type III comes from dry and distant continental area. This study suggests that the characteristic of chemical composition and morphology of smectite may give a clue to understand sediment source, origin of minerals and sedimentation in the deep sea.
Resumo:
Field measurements of salinity, wind and river discharge and numerical simulations of hydrodynamics from 1978 to 1984 are used to investigate the dynamics of the buoyant plume off the Pearl River Estuary (PRE), China during summer. The studies have shown that there are four major horizontal buoyant plume types in summer: Offshore Bulge Spreading (Type I), West Alongshore Spreading (Type II), East Offshore Spreading (Type III), and Symmetrical Alongshore Spreading (Type IV). River mouth conditions, winds and ambient coastal currents have inter-influences to the transport processes of the buoyant plume. It is found that all of the four types are surface-advected plumes by analysing the vertical characteristic of the plumes, and the monthly variations of the river discharge affect the plume size dominantly. The correlation coefficient between the PRE plume size and the river discharge reaches 0.85 during the high river discharge season. A wind strength index has been introduced to examine the wind effect. It is confirmed that winds play a significant role in forming the plume morphology. The alongshore wind stress and the coastal currents determine the alongshore plume spreading. The impact of the ambient currents such as Dongsha Current and South China Sea (SCS) Warm Current on the plume off the shelf has also assessed. The present study has demonstrated that both the river discharge and wind conditions affect the plume evolution.
Resumo:
We explore control mechanisms underlying the vertical migration of zooplankton in the water column under the predator-avoidance hypothesis. Two groups of assumptions in which the organisms are assumed to migrate vertically in order to minimize realized or effective predation pressure (type-I) and to minimize changes in realized or effective predation pressure (type-II), respectively, are investigated. Realized predation pressure is defined as the product of light intensity and relative predation abundance and the part of realized predation pressure that really affects organisms is termed as effective predation pressure. Although both types of assumptions can lead to the migration of zooplankton to avoid the mortality from predators, only the mechanisms based on type-II assumptions permit zooplankton to undergo a normal diel vertical migration (morning descent and evening ascent). The assumption of minimizing changes in realized predation pressure is based on consideration of DVM induction only by light intensity and predators. The assumption of minimizing changes in effective predation pressure takes into account, apart from light and predators also the effects of food and temperature. The latter assumption results in the same expression of migration velocity as the former one when both food and temperature are constant over water depth. A significant characteristic of the two type-II assumptions is that the relative change in light intensity plays a primary role in determining the migration velocity. The photoresponse is modified by other environmental variables: predation pressure, food and temperature. Both light and predation pressure are necessary for organisms to undertake DVM. We analyse the effect of each single variable. The modification of the phototaxis of migratory organisms depends on the vertical distribution of these variables. (C) 2001 Academic Press.
Resumo:
在已有制造工艺及标定技术基础上,为进一步改善大型铰接并联六维测力平台的测量精度,本文基于螺旋理论和影响系数原理,引入符号函数建立了Stewart结构大型铰接六维测力平台的摩擦模型。文中提出了关节摩擦对铰接并联六维测力平台测量精度的影响矩阵及I、H类误差表达式,绘制了在不同外载和关节摩擦系数条件下,六维测力平台的I、II类误差曲线,并总结丁关节摩擦和平台自重对测力平台测量精度的影响规律。为具有普通球形铰链人型Stewart平台六维测力下台精度的提高和改善提供了理论基础。
Resumo:
Shijiawan –Lijiacha area, lying on the northeastern part of the Shanbei Slope of Ordos Basin, was selected as studying area. The previous explorations proved that the 2nd segment and 6th segment of the Yanchang Formation are the most important oil-bearing formations. It is indicated that the sedimentary facies and reservoir characteristics restricted the hydrocarbon accumulation regularity. Therefore, with petrology methodologies, such as outcrop observation, core description, geophysical logging interpretation, thin section determination, scanning electron microscope, as well as rock property analysis, the reservoirs was were systematically studied and characterized. The sedimentary micro-facies, seals, reservoir-seal combines, migration pathways and entrapping modes were taken into account. The author tempted to establish a base for further studies on reservoirs and on petroleum geology, and to provide some reliably geological evidences for later prospect activities. It was found that the sediments in the 2nd and 3rd segments of the Yanchang Formation in Shijiawan –Lijiacha area were deposited in braided rivers, and most sandy-bodies were identified as channel sandbars. The 4+5th and 6th segments were principally deposited in deltaic-plain environment, consisting of corresponding sub-facies such as distributary channels, natural levee, crevasse-splay and marsh. The skeleton sandy-bodies were identified as sandy sediments of distributary channels. The sand grains in reservoir in studied area possess generally low mineralogical maturity and moderate structural maturity, and the form of pores may be classified into intergranular types and dissolved types. Most reservoirs of Yanchang Formation in Shijiawan –Lijiacha area belong to extreme low-porosity low-permeability ones (type III), and the 2nd sediments belongs to low permeability one (type II) and the 6th segment belong to super low-permeability one(type Ⅳ). The reservoirs in the 2nd segment behave more heterogeneous than those in the 6th segment. The statistic analysis results show that, for 6th and 4+5th segments, the high quality reservoir-seal combines may be found everywhere in the studied area except in the northwest and the southwest parts; and for 1st and 2nd segments, in the northeast, central and southwest parts Petroleum migration happened in the duration of the Early Cretaceous period in both lateral and vertical directions. The migration paths were mainly constructed by permeable sandy-bodies. The superimposed channel sandy-bodies consist of the principal part of the system of carriers. the vertical fractures, that may travel through the seals between reservoirs, offered the vertical paths for migrating oil. It may be synthesized that oil coming from south kitchens migrated first laterally in carriers in the 6th segment. When arrived at the studied area, oil will migration laterally or/and vertical within both the sandy-bodies and fractures, in a climbing-stair way. The results demonstrate that the oil was entrapped in traps structure-lithology and/or lithology traps. In some cases, the hydrodynamic force may help to trap oil. Accumulation of oil in the area was mainly controlled by sedimentary facies, seals, structure, and heterogeneity of reservoir in the 2nd, 4+5th and 6th segments. Especially, the oil distributions in both the 2nd and 6th segments were obviously influenced by seals in the 4+5th segment. The existence of seals in 1st segment seems important for accumulation in the 2nd segment.
Resumo:
Based on the principle and method of sequence, the author describes the sequence-filling model of the rifting basin of Xujiaweizi and its gas exploration potential. The object of this paper belongs to the area around Shengping-Wangjiatun anticline. Its srtatigraphy includes Huoshiling Formation (neutral and basic volcanic rocks), Shahezi Formation (coal bedding and mud and some sandstone) and Yingcheng Formation from bottom to top. These stratigraphy units are defined by author as mesosequences respectively. The author emphasizes that the main control factors of sequence change with the types of basin and stage of basin. So the sequence is researched according to the types of basin. This viewpoint is very new, and it is consistent with the principle of sequence. Volcanic action is very frequent and acute, topography difference is obvious. Between the volcanic events, Shahezi Formation is formed, which mainly consists-of sedimentary rocks. Based on the datum from seismic section and drilling core and well-logging, the author analyzes the single unit and unit set and system tract and sedimentary fancies, then, according to the accommodation space change and marking of sequence boundary, Shahezi Formation is divided into two Third-scale sequences. The sedimentary fancies and depth distribution are described. The author also pointed out that the volcanic rocks consume the accommodation space, so volcanic rocks can influence the development of sequence. Based on the concept of accommodation space, the author put volcanic rocks into sequence frame, which normally consists of sedimentary rocks. The topography of volcanic is controlled by lithology of volcanic rocks, the pattern of volcanic eruption and the topography before volcanic eruption. The topography of volcanic can influence sedimentation and the filling pattern of sedimentary rocks. The author describes the composition and lithology fancies and depth distribution of volcanic rocks. The volcanic rocks and Volcanic building, volcanic structure is recognized on seismic section. The author paid a special attention to the relationship between sedimentation and volcanism. Finally, the author analyses the combination of source-reservoir-cover unit in sequence frame. The mudstone of Shahezi Formation has a great depth, the Kerogene in it belongs to type II and III, which tends to produce gas. The Yingcheng Formation lies between Shahezi Formation and Denglouku Formation, belonging to good reservoir. The volcanic rocks of Huoshiling Formation often formed high building, which can capture the gas produced from Shahezi Formation. The stratigraphy of rifting basin of Xujiaweizi has the great potential of gas exploration. This paper claims the following creative points: 1. The author applied the principle and method of sequence to rifting basin, greatly extending its research area and topic issues. 2. The author pointed out that basin of different type and of different stage has a different type of sequence. This is caused by the different main control factors of sequence. 3. Put volcanic rocks into the sequence frame, discussing the probability of regarding the volcanic rocks as the component of sequence, dealing with the relationship between sedimentation and volcanism and its influence to the source-reservoir-cover system. 4. The author pointed out that the filling pattern of rifting basin are determined by the filling pattern of megasequence, whose filling pattern is determined by the filling pattern of system tract and the change of accommodation space.
Resumo:
The Gangxi oil field has reached a stage of high water production. The reservoir parameters, such as reservoir physical characteristics, pore structure, fluid, have obviously changed. This thesis therefore carries out a study of these parameters that control reservoir characteristics, physical and chemical actions that have taken place within the reservoirs due to fluid injection, subsequent variations of reservoir macroscopic physical features, microscopic pore structures, seepages, and formation fluid properties. This study rebuilds a geologic model for this oil field, establishes a log-interpreting model, proposes a methodology for dealing with large pore channels and remnant oil distribution, and offers a basis for effective excavation of potential oil, recovery planning, and improvement of water-injection techniques. To resolve some concurrent key problems in the process of exploration of the Gangxi area, this thesis carries out a multidisciplinary research into reservoir geology, physical geography, reservoir engineering, and oil-water well testing. Taking sandstone and flow unit as objects, this study establishes a fine geologic model by a quantificational or semi-quantificational approach in order to understand the remnant oil distribution and the reservoir potential, and accordingly proposes a plan for further exploration. By rebuilding a geological model and applying reservoir-engineering methods, such as numerical simulation, this thesis studies the oil-water movement patterns and remnant-oil distribution, and further advances a deployment plan for the necessary adjustments and increase of recoverable reserves. Main achievements of this study are as follows: 1. The Minghazhen Formation in the Gangxi area is featured by medium-sinuosity river deposits, manifesting themselves as a transitional type between typical meandering and braided rivers. The main microfacies are products of main and branch channels, levee, inter-channel overflows and crevasse-splay floodplains. The Guantao Group is dominantly braided river deposit, and microfacies are mainly formed in channel bar, braided channel and overbank. Main lithofacies include conglomerate, sandstone, siltstone and shale, with sandstone facies being the principal type of the reservoir. 2. The reservoir flow unit of the Gangxi area can be divided into three types: Type I is a high-quality heterogeneous seepage unit, mainly distributed in main channel; Type II is a moderate-quality semi-heterogeneous seepage unit, mainly distributed in both main and branch channels, and partly seen within inter-channel overflow microfacies; Type III is a low-quality, relatively strong heterogeneous seepage unit, mainly distributed in inter-channel overflow microfacies and channel flanks. 3. Flow units and sedimentary microfacies have exerted relatively strong controls on the flowing of underground oil-water: (1) injection-production is often effective in the float units of Type I and II, whilst in the same group of injection-production wells, impellent velocity depends on flow unit types and injection-production spacing; (2) The injection-production of Type III flow unit between the injection-production wells of Type I and II flow units, however, are little effective; (3) there can form a seepage shield in composite channels between channels, leading to inefficient injection and production. 4. Mainly types of large-scale remnant-oil distribution are as follows: (1) remnant oil reservoir of Type III flow unit; (2) injection-production well group of remnant oil area of Type III flow unit; (3) remnant oil reservoirs that cannot be controlled by well network, including reservoir featured by injection without production, reservoir characterized by production without injection, and oil reservoir at which no well can arrive; (4) remnant oil area where injection-production system is not complete. 5. Utilizing different methods to deal with different sedimentary types, sub-dividing the columns of up to 900 wells into 76 chronostratigraphic units. Four transitional sandstone types are recognized, and contrast modes of different sandstone facies are summarized Analyzing in details the reservoirs of different quality by deciphering densely spaced well patterns, dividing microscopic facies and flow units, analyzing remnant oil distribution and its effect on injection-production pattern, and the heterogeneity. Theory foundation is therefore provided for further excavation of remnant oil. Re-evaluating well-log data. The understanding of water-flood layers and conductive formations in the Gangxi area have been considerably improved, and the original interpretations of 233 wells have changed by means of double checking. Variations of the reservoirs and the fluid and formation pressures after water injection are analyzed and summarized Studies are carried out of close elements of the reservoirs, fine reservoir types, oil-water distribution patterns, as well as factors controlling oil-gas enrichment. A static geological model and a prediction model of important tracts are established. Remaining recoverable reserves are calculated of all the oil wells and oil-sandstones. It is proposed that injection-production patterns of 348 oil-sandstones should be adjusted according to the analysis of adaptability of all kinds of sandstones in the injection-production wells.
Resumo:
伟晶岩形成和演化中岩浆-热液过渡阶段物理化学性质、过铝质富挥发分岩浆体系岩浆液相不混溶、流体相出溶事件的相对时间尺度以及在岩浆-热液过渡阶段体系中稀土和其它微量元素地球化学行为(稀土“四重效应”机制和微量元素分异及控制因素等)是目前过铝质岩浆体系研究的焦点问题。对上述问题的研究和探讨，将有助于了解伟晶岩形成和演化的全过程，有助于了解挥发分(H_20、F、B、P)对过铝质岩浆体系物理性质以及对REE和其它微量元素地球化学行为影响，这对于理解过铝质岩浆体系成岩、成矿作用过程具有重大的理论和实际意义。本论文选择著名的新疆阿尔泰3号伟晶岩脉为研究对象，由于它具有完美的分带特征，使我们有可能通过各结构带矿物学、地球化学的研究揭示伟晶岩成因和演化过程以及讨论岩浆-热液过渡阶段体系中的稀土和微量元素地球化学行为。由于LCT型伟晶岩具有明显的分带性、矿物颗粒大小不均匀性等特点，因此利用全岩样品研究伟晶岩往往因取样没有代表性而被大多数岩石学家和地球化学家所否定。考虑到这点，本文系统采集阿尔泰3号伟晶岩脉各结构带磷灰石、电气石、碱性长石、石英矿物，部分结构带的石榴石、绿柱石、锂辉石矿物以及伟晶岩冷凝边和蚀变围岩的全岩样品，通过各结构带磷灰石矿物化学组成和~(87)Sr／~(86)Sr比值测定，电气石矿物的化学组成和硼同位素组成分析，碱性长石中磷含量的电子探针分析和碱性长石-石英矿物对的氧同位素体系研究以及蚀变围岩和冷凝边的化学组成分析，本文较为详尽系统地探讨以上所有的问题。通过本次多年的研究，我们获得了以下几点新的认识：f1) 富挥发分过铝质岩浆体系的样品存在稀土“四重效应”和Y-Ho、Zr-Hf、Nb-Ta、Sr-Eu元素对的显著分异，表明在过铝质岩浆演化过程中含氟流体相起着重要的作用；目前，稀土“四重效应”机制被认为是含水流体相与过铝质岩浆熔体相互作用的结果(Irber 1999；Bau 1997)，而不是独居石、磷钇矿、石榴石矿物等矿物的早期结晶引起的残余熔体稀土含量的异常变化。由于阿尔泰3号伟晶岩脉各带磷灰石以及与其共生的石榴石、绿柱石、碱性长石、锂辉石矿物均存存明显的稀土“四重效应”以及相同电价、相似离子半径的不相容元素间存在显著的分异，并结合最近赵振华等(1999)和Sba and Chappell(1999)报道S型花岗岩全岩和单矿物(磷灰石、独居石、长石、黄玉等)均存在稀土“四重效应”这一现象，本文研究提出，稀土“四重效应”是富挥发分过铝质岩浆体系的一个基本特征，其机制既不可能由含稀土的副矿物早期结晶引起残余熔体相中REE含量变化的结果，也不能定性地归因于流体相与熔体相相互作用过程中稀土元素在流体／熔体之间分异的结果，而很可能与伟晶岩岩浆形成之前某些过程密切相关，S型花岗岩岩浆在液相线以上存在硅酸盐熔体与高盐熔体(或卤水相)的不混溶液相分离有可能是过铝质岩浆体系产生稀土“四重效应”的主要原因。(2) 由于Sr~(2+)与Eu~(2+)具有相同的电价、相似的离子半径，根据经典的地球化学原理，它们具有相似的地球化学行为，在各种地质过程中其它们具有紧密的一致性。阿尔泰3号伟晶岩磷灰石中Sr／Eu比值具有二歧变化现象，其中I、Il、III和IV带磷灰石具有低的Sr／Eu比值(16:0～111.2)，而V、VI、VII带、核部带和IV带中的一个磷灰石则显示较大的Sr／Eu比值(主要在246．6～514:9范围，其中IV带的一个磷灰石该比值在10000以上)。对世界范围内的过铝质花岗岩统计表明，过铝质岩浆岩的全岩样品中的Sr／Eu也呈现二歧变化，由此本文提出Sr／Eu比值是指示过铝质岩浆体系中岩浆流体相出溶的有效地球化学参数，大于300的Sr／Eu比值是Eu~(2+)强烈分配进入流体相的地球化学标志。(3) 阿尔泰3号伟晶岩I、II、III带电气石矿物的硼同位素组成(δ~(11)B)分布在-41.11‰～-30.90‰之间，V、VI、VII带电气石矿物硼同位素组成(δ~(11)B)在-15.23‰～-9.20‰范围，IV带电气石硼同位素分布于-39.19～13.10‰范围，如此大的硼同位素分馏无法根据实验研究获得的熔体／流体相间的分馏系数进行合理解释。我们的研究表明岩浆成因电气石的B同位素组成与电气石化学组成具相关性，随电气石Y位上AI、Li阳离子数的增大，δ~(11)B值显示明显增大的趋势。阿尔泰3号伟晶岩最初形成的结构带中电气石的B同位素组成是目前所发现的最低值之一(-41.1l～39.01‰)，指示形成伟晶岩脉的初始岩浆可能由含非海相蒸发岩的泥质岩经变质深熔作用形成，或是伟晶岩岩浆在上侵定位过程中同化了含非海相蒸发岩地层的结果。本次研究利用电气石-白云母和电气石-四硼酸盐矿物间的同位索分馏以及熔体相-流体相间的同位索分馏，合理解释了阿尔泰3号伟晶岩脉电气石B同位素分馏过程，并首次获得伟晶岩形成、演化过程中B同位素组成演化的全程图谱。(4)伟晶岩岩浆形成和演化过程是否存在由过磷引起的液相不混溶现象未见确凿的岩石学和实验地球化学证据。阿尔泰3号伟晶岩脉糖粒状钠长石带(II带)明显由两种不同组构的岩性组成，而且该带是3号脉主要的Be矿化带，也是P、REE最重要的沉淀场所。阿尔泰3号伟晶岩脉梳状结构带和I带的碱性长石具较高P含量(平均值分别为0.42 wt％和0.22 wt％)，随着岩浆的演化进行，从III带到核部带，碱性长石中P含量逐渐增大(平均值由0.21 wt％增至0.50 wt％)，而II带碱性长石中异常低的P含量(平均值为0.08、wt％)是该带大量磷灰石矿物饱和结晶，导致残余熔体相中P极度亏损所造成的，而不是晚期出溶的岩浆热液交代形成的。根据Watson (1978)、Ryerson and Hess(1980)在液相线以上温度下实验研究获得的微量元素在不混溶的基性和酸性液相中分配特征，以及Webster et a1．(1997）对德国Ehrenfriedersdorf矿区伟晶岩石英中熔体包裹体的研究成果，我们推断在富磷岩浆体系中，在其演化的早期将出现由磷引起的液相不混溶作用，它对伟晶岩成岩和Be的成矿具有重大的影响。
