Fractional calculus: application in modelling and control

This contribution introduces the fractional calculus (FC) fundamental mathematical aspects and discuses some of their consequences. Based on the FC concepts, the chapter reviews the main approaches for implementing fractional operators and discusses the adoption of FC in control systems. Finally are presented some applications in the areas of modeling and control, namely fractional PID, heat diffusion systems, electromagnetism, fractional electrical impedances, evolutionary algorithms, robotics, and nonlinear system control.

Past and present: conditions of life during childhood and mortality of older adults

ABSTRACT OBJECTIVE: To analyze whether socioeconomic and health conditions during childhood are associated with mortality during old age. METHODS: Data were extracted from the SABE Study (Saúde, Bem-estar e Envelhecimento – Health, Welfare and Aging), which were performed in 2000 and 2006. The sample consisted of 2004 (1,355 living and 649 dead) older adults. The statistical analysis was performed based on Poisson regression models, taking into account the time variation of risk observed. Older adults’ demographic characteristics and life conditions were evaluated, as were the socioeconomic and lifestyle conditions they acquired during their adult life. RESULTS: Only the area of residence during childhood (rural or urban) remained as a factor associated with mortality at advanced ages. However, this association lost significance when the variables acquired during adulthood were added to the model. CONCLUSIONS: Despite the information regarding the conditions during childhood being limited and perhaps not accurately measure the socioeconomic status and health in the first years of life, the findings of this study suggest that improving the environmental conditions of children and creating opportunities during early adulthood may contribute to greater survival rates for those of more advanced years.

Intrusion of Lamprophyre dyke and related deformation effects in the host rock salt: A case study from the Loulé Diapir, Portugal

A rock salt-lamprophyre dyke contact zone (sub-vertical, NE-SW strike) was investigated for its petrographic, mechanic and physical properties by means of anisotropy of magnetic susceptibility CAMS) and rock magnetic properties, coupled with quantitative microstructural analysis and thermal mathematical modelling. The quantitative microstructural analysis of halite texture and solid inclusions revealed good spatial correlation with AMS and halite fabrics. The fabrics of both lamprophyre and rock salt record the magmatic intrusion, "plastic" flow and regional deformation (characterized by a NW-SE trending steep foliation). AMS and microstructural analysis revealed two deformation fabrics in the rock salt: (1) the deformation fabrics in rock salt on the NW side of the dyke are associated with high temperature and high fluid activity attributed to the dyke emplacement; (2) On the opposite side of the dyke, the emplacement-related fabric is reworked by localized tectonic deformation. The paleomagnetic results suggest significant rotation of the whole dyke, probably during the diapir ascent and/or the regional Tertiary to Quaternary deformation. (C) 2014 Elsevier B.V. All rights reserved.

Generic life cycle assessment of the Jatropha biodiesel system

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do Grau de Mestre em Energia e Bioenergia

A case study on the improvement of eco-efficiency ratios: application to a composite processing industry

The World Business Council for Sustainable Development (WBCSD) defines Eco-Efficiency as follows: ‘Eco- Efficiency is achieved by the delivery of competitively priced-goods and services that satisfy human needs and bring quality of life, while progressively reducing ecological impacts and resource intensity throughout the life-cycle to a level at least in line with the earth’s estimated carrying capacity’. Eco-Efficiency is under this point of view a key concept for sustainable development, bringing together economic and ecological progress. Measuring the Eco-Efficiency of a company, factory or business, is a complex process that involves the measurement and control of several and relevant parameters or indicators, globally applied to all companies in general, or specific according to the nature and specificities of the business itself. In this study, an attempt was made in order to measure and evaluate the eco-efficiency of a pultruded composite processing company. For this purpose the recommendations of WBCSD [1] and the directives of ISO 14301 standard [2] were followed and applied. The analysis was restricted to the main business branch of the company: the production and sale of standard GFRP pultrusion profiles. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined according to ISO 14031 recommendations. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent eco-efficiency’s ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and ecoefficiency ratios were estimated taking into account the implementation of new proceedings and procedures, both in upstream and downstream of the production process, namely: a) Adoption of new heating system for pultrusion die in the manufacturing process, more effective and with minor heat losses; b) Implementation of new software for stock management (raw materials and final products) that minimize production failures and delivery delays to final consumer; c) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. In particular, the last approach seems to significantly improve the eco-efficient performance of the company. Currently, by-products and wastes generated in the manufacturing process of GFRP profiles are landfilled, with supplementary added costs to this company traduced by transport of scrap, landfill taxes and required test analysis to waste materials. However, mechanical recycling of GFRP waste materials, with reduction to powdered and fibrous particulates, constitutes a recycling process that can be easily attained on heavy-duty cutting mills. The posterior reuse of obtained recyclates, either into a close-looping process, as filler replacement of resin matrix of GFRP profiles, or as reinforcement of other composite materials produced by the company, will drive to both costs reduction in raw materials and landfill process, and minimization of waste landfill. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

PREVALENCE OF HEPATITIS B AND HEPATITIS C MARKERS IN ALCOHOLICS WITH AND WITHOUT CLINICALLY EVIDENT HEPATIC CIRRHOSIS

We assessed the frequency of serological markers of hepatitis B virus (HBV) and hepatitis C virus (HCV) infections in 365 alcoholics by determining, by ELISA, the presence of HBsAg, anti-HBc, anti-HBs and anti-HCV. Fifty patients were cirrhotics and 315 had no evidence of hepatic cirrhosis; of the latter HBsAg was assessed in all, anti-HBc and anti-HBs in 130, and anti-HCV in 210. Among the alcoholics the frequencies of HBsAg (1.9%), anti-HBc (28.3%) and anti-HCV (3.8%) were higher (p<0.001) than among the controls (N=17,059), 0.4%, 4.0% and 0.4% respectively. The frequency of positive HBsAg was higher (p<0.001) in the cirrhotic patients (8.0%) than in alcoholics without cirrhosis (0.95%) and in controls (0.4%), and similar between the latter; of anti-HBc in alcoholics without cirrhosis (28.5%) was similar in cirrhotics patients (28.0%) and higher (p<0.001) than in the controls (4.0%); of anti-HBs in alcoholics without cirrhosis (20.8%) was similar to that of the cirrhotic patients (10.0%), and the anti-HCV was similar between alcoholics with (6.0%) and without cirrhosis (3.3%) and higher (p<0.001) than in controls (0.4%). We concluded that: a) alcoholics with or without cirrhosis have similar frequencies of infection with HBV and HCV between them, and higher than in nonalcoholics; b) alcoholics without cirrhosis had a frequency of HBV active infection (HBsAg+) which was similar to the controls, whereas among those who progressed to cirrhosis this frequency was significantly higher, what suggests that HBV may be implicated in the pathogenesis of cirrhosis in a few alcoholic individuals.

ZoomAzores project: implementation of a WebGIS for Nature and Adventure Tourism.

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação

Modelling and Control of Freeway Traffic

This paper presents the most recent developments of the Simulator of Intelligent Transportation Systems (SITS). The SITS is based on a microscopic simulation approach to reproduce real traffic conditions in an urban or non-urban network. In order to analyse the quality of the microscopic traffic simulator SITS a benchmark test was performed. A dynamical analysis of several traffic phenomena, applying a new modelling formalism based on the embedding of statistics and Laplace transform, is then addressed. The paper presents also a new traffic control concept applied to a freeway traffic system.

Distribution of hepatitis B virus genotypes and viral load levels in Brazilian chronically infected patients in São Paulo city

The objective of the present study was to evaluate the serum viral load in chronically infected Hepatitis B virus (HBV) patients and to investigate the distribution of HBV genotypes in São Paulo city. Quantitative HBV-DNA assays and HBV genotyping have gained importance for predicting HBV disease progression, have been employed for assessing infectivity, for treatment monitoring and for detecting the emergence of drug resistance. Twenty-nine Brazilian patients with suspected chronic hepatitis B were studied, using real time PCR for viral load determination and direct DNA sequencing for the genotyping. The serology revealed chronic HBV infection in 22 samples. The HBV-DNA was positive in 68% samples (15/22). The phylogenetic analysis disclosed that eleven patients were infected with HBV genotype A, two with genotype F and two with genotype D. Thus, the genotype A was the most prevalent in our study.

Modelling and optimization of the ion exchange membrane bioreactor for removal of anionic pollutants from drinking water streams

Dissertação para obtenção do Grau de Doutor em Engenharia Química, especialidade de Engenharia Bioquímica

THE INFLUENCE OF HIV-1 SUBTYPES C, CRF31_BC AND B ON DISEASE PROGRESSION AND INITIAL VIROLOGIC RESPONSE TO HAART IN A SOUTHERN BRAZILIAN COHORT

Background: Although most HIV-1 infections in Brazil are due to subtype B, Southern Brazil has a high prevalence of subtype C and recombinant forms, such as CRF31_BC. This study assessed the impact of viral diversity on clinical progression in a cohort of newly diagnosed HIV-positive patients. Methods: From July/2004 to December/2005, 135 HIV-infected patients were recruited. The partial pol region was subtyped by phylogeny. A generalized estimating equation (GEE) model was used to examine the relationship between viral subtype, CD4+ T cell count and viral load levels before antiretroviral therapy. Hazard ratio (Cox regression) was used to evaluate factors associated with viral suppression (viral load < 50 copies/mL at six months). Results: Main HIV-1 subtypes included B (29.4%), C (28.2%), and CRF31_BC (23.5%). Subtypes B and C showed a similar trend in CD4+ T cell decline. Comparison of non-B (C and CRF31_BC) and B subtypes revealed no significant difference in the proportion of patients with viral suppression at six months (week 24). Higher CD4+ T cell count and lower viral load were independently associated with viral suppression. Conclusion: No significant differences were found between subtypes; however, lower viral load and higher CD4+ T cell count before therapy were associated with better response.

The impact of sizeof the firm and exchange rate in the export propensity of domestic and foreign owned firms in a developing country: A study of the Brazilian exporters

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Modelling and Forecasting Mortality Patterns

Thesis submitted in partial fulfillment of the requirements for the Degree of Doctor of Statistics and Information Management